Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Genetic algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Rovibrational controlled-NOT gates using optimized stimulated Raman adiabatic passage techniques and optimal control theory

Implementation of quantum controlled-NOT (CNOT) gates in realistic molecular systems is studied using stimulated Raman adiabatic passage (STIRAP) techniques optimized in the time domain by genetic algorithms or coupled with optimal control theory. In the first case, with an adiabatic solution (a series of STIRAP processes) as starting point, we optimize in the time domain different parameters of the pulses to obtain a high fidelity in two realistic cases under consideration. A two-qubit CNOT gate constructed from different assignments in rovibrational states is considered in diatomic (NaCs) or polyatomic (SCCl{sub 2}) molecules. The difficulty of encoding logical states in pure rotational states with STIRAP processes is illustrated. In such circumstances, the gate can be implemented by optimal control theory and the STIRAP sequence can then be used as an interesting trial field. We discuss the relative merits of the two methods for rovibrational computing (structure of the control field, duration of the control, and efficiency of the optimization)

74 ATOMIC AND MOLECULAR PHYSICS↗

Laser wakefield acceleration with active feedback at 5 Hz

We describe the use of a genetic algorithm to apply active feedback to a laser wakefield accelerator at a higher power (10 TW) and a lower repetition rate (5 Hz) than previous work. The temporal shape of the drive laser pulse was adjusted automatically to optimize the properties of the electron beam. By changing the software configuration, different properties could be improved. This included the total accelerated charge per bunch, which was doubled, and the average electron energy, which was increased from 22 to 27 MeV. Using experimental measurements directly to provide feedback allows the system to work even when the underlying acceleration mechanisms are not fully understood, and, in fact, studying the optimized pulse shape might reveal new insights into the physical processes responsible. Our work suggests that this technique, which has already been applied with low-power lasers, can be extended to work with petawatt-class laser systems.

43 PARTICLE ACCELERATORS↗

Compensating slice emittance growth in high brightness photoinjectors using sacrificial charge

Achieving maximum electron beam brightness in photoinjectors requires detailed control of the 3D bunch shape and precise tuning of the beam focusing. Even in state-of-the-art designs, slice emittance growth due to nonlinear space charge forces and partial nonlaminarity often remains non-negligible. In this work, we introduce a new means to linearize the transverse slice phase space: a sacrificial portion of the bunch’s own charge distribution, formed into a wavebroken shock front by highly nonlinear space charge forces within the gun, whose downstream purpose is to dynamically linearize the desired bunch core. We show that linearization of an appropriately prepared bunch can be achieved via strongly nonlaminar focusing of the sacrificial shock front, while the inner core focuses laminarly. This leads to a natural spatial separation of the two distributions: a dense core surrounded by a diffuse halo of sacrificial charge that can be collimated. Multiobjective genetic algorithm optimizations of the ultracompact x-ray free electron laser injector employ this concept, and we interpret it with an analytic model that agrees well with the simulations. In simulation, we demonstrate a final bunch charge of 100 pC, peak current ∼ 30 A, and a sacrificial charge of 150 pC (250 pC total emitted from cathode) with normalized emittance growth of < 20 nm rad due to space charge. This implies a maximum achievable brightness approximately an order of magnitude greater than existing free electron laser injector designs. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

Development of a deep machine learning interatomic potential for metalloid-containing Pd-Si compounds

Interatomic potentials based on neural-network machine learning (ML) approach to address the long-standing challenge of accuracy versus efficiency in molecular-dynamics simulations have recently attracted a great deal of interest. In this work, utilizing Pd-Si system as a prototype, we extend the development of neural-network ML potentials to compounds exhibiting various types of bonding characteristics. The ML potential is trained by fitting to the energies and forces of both liquid and crystal structures first-principles calculations based on density-functional theory (DFT). We show that the generated ML potential captures the structural features and motifs in Pd 82 Si 18 and Pd 75 Si 25 liquids more accurately than the existing interatomic potential based on embedded-atom method (EAM). The ML potential also describes the solid-liquid interface of these systems very well. Moreover, while the existing EAM potential fails to describe the relative energies of various crystalline structures and predict wrong ground-state structures at Pd 3 Si and Pd 9 Si 2 composition, the developed ML potential predicts correctly the ground-state structures from genetic algorithm search. The efficient ML potential with DFT accuracy from our study will provide a promising scheme for accurate atomistic simulations of structures and dynamics of complex Pd-Si system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure-property maps and optimal inversion in configurational thermodynamics

Cluster expansions of first-principles density-functional databases in multicomponent systems are now used as a routine tool for the prediction of zero- and finite-temperature physical properties. The ability of producing large databases of various degrees of accuracy, i.e., high-throughput calculations, makes pertinent the analysis of error propagation during the inversion process. This is a very demanding task as both data and numerical noise have to be treated on equal footing. We have addressed this problem by using an analysis that combines the variational and evolutionary approaches to cluster expansions. Simulated databases were constructed ex professo to sample the configurational space in two different and complementary ways. These databases were in turn treated with different levels of both systematic and random numerical noise. The effects of the cross-validation level, size of the database, type of numerical imprecisions on the forecasting power of the expansions were extensively analyzed. We found that the size of the database is the most important parameter. Upon this analysis, we have determined criteria for selecting the optimal expansions, i.e., transferable expansions with constant forecasting power in the configurational space (a structure-property map). As a by-product, our study provides a detailed comparison between the variational cluster expansion and the genetic-algorithm approaches.

97 MATHEMATICS AND COMPUTING↗

Large magnetic anisotropy predicted for rare-earth-free F e 16 - x C o x N 2 alloys

Structures and magnetic properties of Fe 16–x Co x N 2 are studied using adaptive genetic algorithm and first-principles calculations. We show that substituting Fe with Co in Fe 16 N 2 with a Co/Fe ratio ≤1 can greatly improve the magnetic anisotropy of the material. The magnetocrystalline anisotropy energy from first-principles calculations reaches 3.18 MJ/m 3 (245.6 μeV per metal atom) for Fe 12 Co 4 N 2 , much larger than that of Fe 16 N 2 , and is one of the largest among the reported rare-earth-free magnets. From our systematic crystal structure searches, we show that there is a structure transition from tetragonal Fe 16 N 2 to cubic Co 16 N 2 in Fe 16–x Co x N 2 as the Co concentration increases, which can be well explained by electron counting analysis. As a result, different magnetic properties between the Fe-rich (x ≤ 8) and Co-rich (x > 8) Fe 16–x Co x N 2 is closely related to the structural transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structures, phase transitions, and magnetic properties of C o 3 Si from first-principles calculations

Co 3 Si was recently reported to exhibit remarkable magnetic properties in the nanoparticle form [Appl. Phys. Lett. 108, 152406 (2016)], yet better understanding of this material is to be promoted. Here we report a study on the crystal structures of Co 3 Si using adaptive genetic algorithm, and discuss its electronic and magnetic properties from first-principles calculations. Several competing phases of Co 3 Si have been revealed from our calculations. We show that the hexagonal Co 3 Si structure reported in experiments has lower energy in non-magnetic state than ferromagnetic state at zero temperature. The ferromagnetic state of the hexagonal structure is dynamically unstable with imaginary phonon modes and transforms to a new orthorhombic structure, which is confirmed by our structure searches to have the lowest energy for both Co 3 Si and Co 3 Ge. Magnetic properties of the experimental hexagonal structure and the lowest-energy structures obtained from our structure searches are investigated in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ideal Waveform to Generate the Maximum Possible Electron Recollision Energy for Any Given Oscillation Period

We present the perfect waveform which, during a strong field interaction, generates the maximum possible electron recollision energy for any given oscillation period, over 3 times as high as that for a pure sinusoidal wave. This ideal waveform has the form of a linear ramp with a dc offset. A genetic algorithm was employed to find an optimized practically achievable waveform composed of a longer wavelength field, to provide the offset, in addition to higher frequency components. This second waveform is found to be capable of generating electron recollision energies as high as those for the perfect waveform while retaining the high recollision amplitudes of a pure sinusoidal wave. Calculations of high harmonic generation demonstrate this enhancement, by increasing the cutoff energy by a factor of 2.5 while maintaining the harmonic yield, providing an enhanced tool for attosecond science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New Layered Structures of Cuprous Chalcogenides as Thin Film Solar Cell Materials: Cu 2 Te and Cu 2 Se

The stable crystal structures of two cuprous chalcogenides of Cu 2 X (X = Te or Se) are predicted using an adaptive genetic algorithm in combination with first-principles density functional theory calculations. Both systems are found to prefer a unique and previously unrecognized layered structure, with the total energies much lower than all structures proposed in the literature so far. The newly discovered structures are further shown to be dynamically and mechanically stable, and possess electronic properties consistent with existing experimental observations. In particular, their layered nature is expected to prevail over other structural forms at the interfaces of thin-film solar cells, and knowledge about the precise atomic structures of the interfaces is a prerequisite for achieving long-term stability and high efficiency of CdTe and Cu(In; Ga)Se 2 solar cells.

14 SOLAR ENERGY↗

Structural hierarchy as a key to complex phase selection in Al-Sm

Investigating the unknown structure of the complex cubic phase, previously observed to crystallize from melt-spun amorphous Al–10 at.% Sm alloy, we determine the structure in full site-occupancy detail, highlighting several critical structural features that govern the far-from-equilibrium phase selection pathway. Using an efficient genetic algorithm combining molecular dynamics, density functional theory, and x-ray diffraction, the structure is clearly identified as body-centered cubic Im¯3m (No. 229) with ~140 atoms per cubic unit cell and a lattice parameter of 1.4 nm. The complex structure is further refined to elucidate the detailed site occupancy, revealing full Sm occupancy on 6b sites and split Sm/Al occupancy on 16f sites. Based on the refined site occupancy associated with the experimentally observed phase, we term this phase ε–Al 60 Sm 11 (bcc), corresponding to the limiting situation when all 16f sites are occupied by Sm. However, it should be recognized that the range of solubility enabled by split occupancy at Sm sites is an important feature in phase selection under experimental conditions, permitting an avenue for transition with little or no chemical partitioning. Our analysis shows that the ε–Al 60 Sm 11 (bcc) exhibits a “3-6-6-1” first-shell packing around Sm centers on 16f sites, the same dominant motif exhibited by the undercooled liquid. Here, the coincident motif supports the notion that liquid/glass ordering at high undercooling may give rise to topological invariants between the noncrystalline and crystalline states that provide kinetic pathways to metastable phases that are not accessible during near-equilibrium processing.

36 MATERIALS SCIENCE↗

Machine learning-accelerated discovery of iron cobalt phosphides as rare-earth-free magnets

Here, the discovery of rare-earth-free permanent magnets has been a goal of scientists for decades. The absence of rare-earth elements will alleviate a pressing concern about the availability of rare-earth elements used in permanent magnets. These magnets are crucial for applications such as wind turbines, electric cars, and memory devices. Rare-earth magnets are special owing to a large magnetic anisotropy energy (K 1 ). In contrast, iron cobalt phosphides hold promise since doping P into cubic FeCo can induce anisotropy, leading to a large coercivity, without introducing rare-earth elements. We present a comprehensive search over the Fe-Co-P ternary space for magnets, utilizing recently developed adaptive machine learning feedback to efficiently screen over 850 000 structures. We focus on machine learning acceleration as a paradigm for materials design. Further adaptive genetic algorithm searches and first-principles calculations aid in the identification of 16 new structures below the known convex hull. Five of them possess high magnetic polarization (J s > 1 T). The structures with desirable magnetic properties center on (Fe,Co) 2⁢ P. This supports conventional wisdom, which focuses on the mixture of the two known end compounds: Fe 2 ⁢P and Co 2 ⁢P. Our work provides guidance for synthesis. We find Fe 7 ⁢CoP 4 shows the most promise (J s = 1.03T and K 1 = 0.83MJ/m 3 ).

36 MATERIALS SCIENCE↗

Machine Learning to Select Experiments Driven by Fundamental Science and Applications for Targeted Nuclear Data Improvement

This work describes a blueprint for a process that accelerates progress in science by quantitatively answering the following question: What is the optimal combination of fundamental-science and application-driven experiments to maximally reduce pertinent data uncertainties? Answering this question entails solving a high-dimensional and complex optimization problem that is best solved with advanced statistic techniques often classified as machine learning. We apply this process within the framework of nuclear data with the aim to select an experiment combination that will reduce uncertainties in 239 Pu nuclear data for neutron energies between 1 and 600 keV. In this field, fundamental-physics driven data, called differential, look at one nuclear physics observable at a time. They are contrasted to application-driven, integral, data where one or few resulting values inform a broad set of nuclear data across several nuclides and energies. The candidates for integral experiments are criticality measurements that were refined by a genetic algorithm to be maximally sensitive to 239 Pu fission cross sections in the desired energy range. Twenty-three candidate differential experiments were investigated and span multiple nuclear physics observables (e.g., total, capture cross sections) for isotopes appearing in the integral experiments. The optimal combination among these candidate experiments was investigated via generalized least squares fitting, augmented with Gaussian processes to ameliorate statistical irregularities in data, and the D-optimality criterion. The latter evaluates for each pair of candidates the joint reduction in uncertainties of all 12200 nuclear data appearing in the integral experiments compared to the knowledge we have from 168 past experiments, theory, and nuclear data. We chose as differential measurements those that investigate 63 Cu and 239 Pu total cross sections, based on D-optimality rank and feasibility constraints. Two integral (criticality) experiments were selected: An experiment with Al 2 ⁢O 3 and graphite interleaved with Pu and a thick Cu reflector explores 1–30 keV, while we target the 30–600 keV range with an experiment that swaps boron in place of graphite with a different geometry.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Single-Shot Reconstruction of Electron Beam Longitudinal Phase Space in a Laser Wakefield Accelerator

We report on a single-shot longitudinal phase-space reconstruction diagnostic for electron beams in a laser wakefield accelerator via the experimental observation of distinct periodic modulations in the angularly resolved spectra. Such modulated angular spectra arise as a result of the direct interaction between the ultrarelativistic electron beam and the laser driver in the presence of the wakefield. A constrained theoretical model for the coupled oscillator, assisted by a genetic algorithm, can recreate the experimental electron spectra and, thus, fully reconstructs the longitudinal phase-space distribution of the electron beam with a temporal resolution of approximately 1.3 fs. In particular, it reveals the slice energy spread of the electron beam, which is important to measure for applications such as x-ray free electron lasers. In our experiment, the root-mean-square energy spread retrieved is bounded at 9.9 MeV, corresponding to a 0.9%–3.0% relative spread, despite the overall GeV energy beam having approximately 100% relative energy spread.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Global SAXS Data Analysis for Multilamellar Vesicles: Evolution of the Scattering Density Profile (SDP) Model

The highly successful scattering density profile (SDP) model, used to jointly analyze small-angle X-ray and neutron scattering data from unilamellar vesicles, has been adapted for use with data from fully hydrated, liquid crystalline multilamellar vesicles (MLVs). Using a genetic algorithm, this new method is capable of providing high-resolution structural information, as well as determining bilayer elastic bending fluctuations from standalone X-ray data. Structural parameters such as bilayer thickness and area per lipid were determined for a series of saturated and unsaturated lipids, as well as binary mixtures with cholesterol. The results are in good agreement with previously reported SDP data, which used both neutron and X-ray data. The inclusion of deuterated and non-deuterated MLV neutron data in the analysis improved the lipid backbone information but did not improve, within experimental error, the structural data regarding bilayer thickness and area per lipid.

Heftberger, Peter↗

ζ-Glycine: insight into the mechanism of a polymorphic phase transition

Glycine is the simplest and most polymorphic amino acid, with five phases having been structurally characterized at atmospheric or high pressure. A sixth form, the elusive ζ phase, was discovered over a decade ago as a short-lived intermediate which formed as the high-pressure ϵ phase transformed to the γ form on decompression. However, its structure has remained unsolved. We now report the structure of the ζ phase, which was trapped at 100 K enabling neutron powder diffraction data to be obtained. The structure was solved using the results of a crystal structure prediction procedure based on fully ab initio energy calculations combined with a genetic algorithm for searching phase space. We show that the fate of ζ-glycine depends on its thermal history: although at room temperature it transforms back to the γ phase, warming the sample from 100 K to room temperature yielded β-glycine, the least stable of the known ambient-pressure polymorphs.

36 MATERIALS SCIENCE↗

Comprehensive Evaluation and Application of GIS Insulation Condition Part 1: Selection and Optimization of Insulation Condition Comprehensive Evaluation Index Based on Multi-Source Information Fusion

How to select and optimize the evaluation indicators from many characteristic information to characterize the internal insulation condition of GIS equipment, and establish a scientific technical and economic evaluation model of insulation condition is a huge challenge needs to be addressed urgently. Motived by this purpose, this study simulates the deterioration process of four typical insulation defects in GIS to obtain the information of UHF, ultrasound, and SF 6 decomposition components excited by different degradation stages of each insulating defect simultaneously. Moreover, the operating environment conditions, running time, overhaul times, and the residual value of equipment are taken into account. Using the improved minimum-redundancy-maximum-relevance (mRMR) criterion and genetic algorithm, a comprehensive evaluation index system including the 23 evaluation indicators in three categories is established, which covers the PD hazard, SF 6 insulation performance, equipment running time and environment, and residual value. The research lays a foundation for the later construction and application of multi-source information fusion evaluation model of GIS equipment insulation condition considering economic value.

42 ENGINEERING↗

50-kW 1kV DC bus air-cooled inverter with 1.7 kV SiC MOSFETs and 3D-printed novel power module packaging structure for grid applications

The traditional heatsink design technologies for forced air-cooling and power semiconductors with low junction temperatures have constrained the converters to be designed with massive heatsinks. The low power losses of WBG device technology and higher junction temperature operation over a wide operating range of power have not been fully utilized with liquid-cooled systems. The other major limitation has also been the traditional power module packaging “stack” approach with baseplate. This paper presents a novel power stage design which involves 1.7 kV silicon carbide (SiC) MOSFETs, a heatsink design with Genetic Algorithm (GA) and built using 3D printing technology, and a novel integrated modular power module for high power density. The air-cooled module assembly has a SiC MOSFET phase leg module with split high-side and low-side switches and a gate driver with cross-talk and short circuit protection functions. The heatsink design was modeled using a co-simulation environment with finite element analysis software and GA in MATLAB and COMSOL. The proposed concepts were verified and validated through experiments at each stage of development. The power stage was evaluated at 800V, 900 V, and 1kV for 20 kHz switching frequency and 50-kW load. The experimental results show that the CEC efficiency is 98.4 %. In addition to the efficiency, a power density of 75 W/in 3 was also achieved.

Chinthavali, Madhu Sudhan↗

A High-Power Density Segmented Traction Drive Inverter

High power density is one of the requirements for traction drive inverters for meeting increasing demand for higher power and performance electrical vehicles (EV). This paper presents design and preliminary experimental results for a 100 kW high-power density inverter for EV traction drive applications. The inverter design was based on the segmented inverter topology that can significantly reduce the inverter DC filter capacitor and employs low-profile planar double-sided cooled SiC MOSFET-based power modules, compact mini-channel heat sinks with fin-profile optimized using genetic-algorithms, and high-ripple current capacitors. The design produced a compact inverter package with a total volume less than 1 litter, exceeding the power density goal of 100 kW/L. Experimental results are included to demonstrate the cooling and electrical performance.

Su, Gui-Jia↗