Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GOES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Analysis and Applications of Water Vapor-Derived Multispectral Composites for Geostationary Satellites

Analysis of multispectral (red-green-blue, RGB) satellite image composites can be used to improve understanding of thermodynamic and / or dynamic features associated with the development of significant weather events (cyclones, hurricanes, intense convection, turbulence, etc.) The enhanced water vapor imaging capabilities of the Advanced Baseline Imager on GOES-16 and GOES-17 satellites provide a unique opportunity to demonstrate this capability through a comparison of the Air Mass (AM) and Differential Water Vapor (DWV) RGB image products for several case studies.

Berndt, Emily↗

Optical Flow for Intermediate Frame Interpolation of Multispectral Geostationary Satellite Data

Applications in areas such as weather tracking and modeling, ecosystem monitoring, wildfire detection, and land-cover change are heavily dependent on spatial and temporal resolutions of satellite observations. However, there are typically trade-offs between spatial and temporal resolutions in dataset selection. For instance, geostationary weather tracking satellites are designed to take snapshots many times throughout the day but sensor hardware limits data collection. In this work we tackle this limitation, developing a method for temporal upsampling of multi-spectral satellite imagery using optical flow video interpolation deep convolutional neural networks. The presented model, extends Super SloMo (SSM) from single optical flow estimates to multichannel where flows are computed per band. We apply this technique on 8 multi-spectral bands of NOAA/NASA's GOES-16 mesoscale dataset to temporally enhance full disk hemispheric snapshots from 15 minutes to 1 minute. Through extensive experimentation, we show SSM vastly outperforms the linear interpolation baseline and that multichannel optical flows improves performance on GOES-16. A visual analysis of optical flow vectors clearly identifies hurricanes and large-scale atmospheric dynamics. Furthermore, we discuss challenges and open questions related to optical flow and temporal interpolation of multispectral geostationary satellite imagery.

Optical Flow↗

Summary of Space Environment Magnetometer and Particle Replacement Experiment (SEMPRE) Study

As part of the GOES-R series follow on architecture study following the NOAA Satellite Observing System Architecture (NSOSA) study, a study team evaluated the feasibility of accommodating the GOES in-situ instruments (Magnetometer and Particle Detectors) on a dedicated spacecraft with no impact to the overall baseline mission cost assuming two large observatories. The accommodations cost on a primary operational type observatory are non-negligible requiring: a large non-magnetic boom to reduce the impact of the spacecraft interference on the magnetometer; and strict contamination control and magnetic cleanliness to prevent magnetic contamination near the magnetometers. These, along with the additional interface complexities greatly increase the cost of larger spacecraft by extending integration time with a large marching army. By contrast, a dedicated mission provides flexibility in location and refresh rate not afforded when these sensors are launched as secondary payloads. This study performed an informal industry survey of small form-factor instruments currently flying or in process of being developed. The study identified three potential particle detector suites and multiple magnetometers that will satisfy the requirements while having low enough volume and mass to allow accommodation on a rideshare class spacecraft. Using the largest of the identified particle detector suites, the Goddard Space Flight Center Mission Design Lab developed a design for a rideshare spacecraft that will accommodate the particle detector suite and magnetometer. The cost of the spacecraft, based on multiple cost models, is comparable to the cost of accommodating the magnetometer and particle detector suite on two (East and West) larger main observatories.

Todirita, Monica↗

The RELAMPAGO Lightning Mapping Array: Preliminary Scientific Results and Application to GLM Calibration and Validation

During November 2018 through April 2019, an 11-station NASA lightning mapping array (LMA) was installed in the Cordoba region of Argentina, in support of GOES-16 Geostationary Lightning Mapper (GLM) calibration and validation, as well as the Remote sensing of Electrification, Lightning, And Mesoscale/microscale Processes with Adaptive Ground Observations (RELAMPAGO) field campaign. This region of Argentina is well known for frequent, intense thunderstorms and severe weather. The LMA was monitored remotely via the Internet throughout its deployment, but due to bandwidth limitations no real-time data were available. Custom GOES-16 imagery provided by NASA SPoRT assisted with monitoring of thunderstorm cases. Occasional site visits were done to obtain data disks, perform routine maintenance, and troubleshoot problems. During the deployment the network captured lightning in a variety of storm modes, including ordinary and severe multicells, supercells, and mesoscale convective systems. Many examples of normal-polarity thunderstorms, as well as a few examples of anomalously charged thunderstorms, were observed. Long (100+ km) horizontally stratified lightning flashes, as well as lightning in overshooting tops, also were frequently observed. Supporting research radar observations were available through January 2019, with operational radar coverage available after that time. Some cases featured supporting ABI meso scanning. This presentation will report on the LMA deployment in context with the RELAMPAGO field campaign, show results from some representative case studies, and will provide initial comparisons to GLM observations.

Lang, Timothy J.↗

Generating Accurate and Consistent Top-Of-Atmosphere Reflectance Products from the New Generation Geostationary Satellite Sensors

GeoNEX is a collaborative project by scientists from NASA, NOAA, JAXA, and other organizations around the world with the purpose of generating a suite of Earth-monitoring products using data streams from the latest geostationary (GEO) sensors including the GOES-16/17 ABI and the Himawari-8/9 AHI. An accurate and consistent top-of-atmosphere (TOA) reflectance product, in particular the bidirectional reflectance factor (BRF), is the starting point in the scientific processing chain. We describe the main considerations and corresponding algorithms in generating the GeoNEX TOA BRF product. First, a special advantage of geostationary data streams is their high temporal resolution (~10 minutes per full-disk scan), providing a key source of information for many downstream products. To fully utilize this high temporal frequency demands a high georegistration accuracy for every acquired image. Our analysis shows that there can be substantial georegistration uncertainties in both GOES and Himawari L1b data which we addressed by implementing a phase-based correction algorithm to remove residual errors. Second, geostationary sensors have distinct illumination-view geometry features in that the solar angle changes for every pixel. Therefore, to accurately derive a BRF requires a solar position algorithm and the estimation of the pixel-wise acquisition time within an uncertainty of 10 seconds. Third, we discuss the measures we adopted to check and correct residual radiometric calibration issues of individual sensors to enable time-series analysis as well as the cross calibration between different satellite sensors (including those from low-Earth orbit). Finally, we also explain the rationale for the choice of the global grid/tile system of the GeoNEX TOA BRF product.

Wang, Weile↗

Using GLM Flash Density, Flash Area, and Flash Energy to Diagnose Tropical Cyclone Structure and Intensification

Increased lightning in tropical cyclones (TCs) is typically associated with intensification, but significant lightning outbreaks are also observed in weakening storms. The total number of lightning flashes in a TC is not always a reliable indicator of TC intensity evolution. Issues with the range and detection efficiency of ground-based networks, particularly for intracloud lightning. Physical processes such as vertical wind shear can intensify asymmetric convection while also weakening the TC. The commissioning of the Geostationary Lightning Mapper (GLM) aboard GOES-16 and GOES-17 marked, for the first time, the presence of an operational lightning detector in geostationary orbit. In addition to flash density (the number of flashes per unit area per unit time), GLM also provides continuous observations of flash area and total optical energy.

Duran, Patrick↗

TPSAS-NF1676L-35370-DND

The above anvil cirrus plume (AACP) is a weather phenomenon that signifies an intense tropopause penetrating updraft which can inject cirrus clouds several kilometers into the stratosphere. Storms that have such intense updrafts are often supercells which generate severe weather such as tornadoes, high winds, and hail. In addition, AACPs moisten the stratosphere and influence the Earth's radiative balance. Though an AACP can be identified by the human eye, no automated AACP detection methods currently exist. Lack of detection inhibits understanding of where and how often AACPs occur, and how these storms influence stratospheric air composition. Previous work involved synthesis of multiple remote sensing and severe weather report/warning data sources to identify AACPs in Geostationary Operational Environmental Satellite system (GOES) satellite imagery and better understand their weather impacts (Bedka et al. (Wea. Forecasting, 2018)). This current study demonstrates an automated AACP identification method based on the application of a deep learning segmentation model known as a U-net. This study documents the development of a U-net model capable of identifying emergent AACPs using only satellite infrared (IR) and visible reflected sunlight imagery. The performance of a U-net is quantitatively benchmarked with human AACP identifications and qualitatively assessed through animations of detections generated from GOES-16 1-minute temporal resolution imagery.

Charles Liles↗

TPSAS-NF1676L-32467-DND

With the launch of a new generation of Geostationary satellites (GEO) such as Himawari and GOES-16 & 17, cloud detection using satellite imager data has been greatly enhanced with increased spectral bands, and higher temporal and spatial resolutions. A concern for all geostationary sensors, however, are changes in instrument sensitivity and algorithm performance at different viewing for daytime and nighttime. CALIPSO lidar observations provide a valuable reference for assessing these impacts as the satellite flies in a sun-synchronous orbit and crosses a wide range of GEO viewing angles each day. This paper will present the cloud mask results using the imager data from Himawari (AHI) and GOES-16&17 (ABI). The detection algorithms have been adapted from the Cloud and Earth’s Radiant Energy System (CERES) MODIS Edition 4 cloud mask, and adjusted and tuned to geo-satellites. They are used operationally for the CERES Time and Space Averaging (TISA) gridded cloud products and for near-real-time retrievals for weather and nowcasting applications.

Qing Z. Trepte↗

California & Oregon Ecological Forecasting: Detecting and Forecasting Fog Occurrence, Frequency, and Change to Support Coast Redwood (Sequoia sempervirens) Habitat Assessments

Fog and low clouds play an important role in providing moisture to coastal ecosystems. Coast redwood (Sequoia sempervirens) forests are currently distributed along a narrow strip of coastline in California and Oregon and rely on the presence of marine fog for moisture availability during the dry season (June-October). Recent time series analyses presented an uncertain future of fog frequency; however, a decline in fog presence may have adverse effects on the coast redwood habitat. To support Save the Redwoods League, a non-profit organization dedicated to coast redwood forest management, the team analyzed hourly fog data from the Geospatial Operational Environmental Satellite 17 (GOES-17) Advanced Baseline Imager (ABI) and daily cloud cover data from the Moderate Resolution Imaging Spectroradiometer (MODIS) aboard the Terra satellite. To explore present day fog longevity, GOES-17 was utilized to map the number of fog hours per day for the 2019 and 2020 dry seasons. The MODIS cloud flag was used to map the presence or absence of daily fog, which was summarized to create a monthly fog frequency dataset and identify trends in fog presence between 2000-2020. Both datasets were used as inputs into the random forest machine learning algorithm to identify climatic drivers of fog presence and longevity over the landscape. The present-day models suggested that daily temperature difference is a driving force behind fog presence and longevity. Trends in fog presence from 2000-2020 indicated great interannual variability. Finally, fog presence was modeled under a 2080 climate projection to shed light on the future of fog presence under a projected warmer climate. Model results projected an overall decline in fog presence during the dry season in the 2080s. Decreased fog presence as a result of increased temperature difference under a warmer climate remains to be a topic of investigation as to the impact on future redwood habitat suitability.

DEVELOP Project Summary↗

California & Oregon Ecological Forecasting: Detecting and Forecasting Fog Occurrence, Frequency, and Change to Inform Coast Redwood (Sequoia sempervirens) Habitat Assessments

Fog and low clouds play an important role in providing moisture to coastal ecosystems. Coast redwood (Sequoia sempervirens) forests are currently distributed along a narrow strip of coastline in California and Oregon and rely on the presence of marine fog for moisture availability during the dry season (June-October). Recent time series analyses presented an uncertain future of fog frequency; however, a decline in fog presence may have adverse effects on the coast redwood habitat. To complement ongoing work by Save the Redwoods League, a non-profit organization dedicated to coast redwood forest management, the team analyzed hourly fog data from the Geospatial Operational Environmental Satellite 17 (GOES-17) Advanced Baseline Imager (ABI) and daily cloud cover data from the Moderate Resolution Imaging Spectroradiometer (MODIS) aboard the Terra satellite. To explore present day fog longevity, GOES-17 was utilized to map the number of fog hours per day for the 2019 and 2020 dry seasons. The MODIS cloud flag was used to map the presence or absence of daily fog, which was summarized to create a monthly fog frequency dataset and identify trends in fog presence between 2000-2020. Both datasets were used as inputs into the random forest machine learning algorithm to identify climatic drivers of fog presence and longevity over the landscape. The present-day models suggested that daily temperature difference is a driving force behind fog presence and longevity. Trends in fog presence from 2000-2020 indicated great interannual variability. Finally, fog presence was modeled under a 2080 climate projection to shed light on the future of fog presence under a projected warmer climate. Model results projected an overall decline in fog presence during the dry season in the 2080s. Decreased fog presence as a result of increased temperature difference under a warmer climate remains to be a topic of investigation as to the impact on future redwood habitat suitability.

DEVELOP Technical Paper↗

Development of a Global Reference Surface Reflectance and BRDF Datasets from Geostationary Satellite Observations and AERONET Measurements

Surface reflectances and their dependency on illumination-view geometries (i.e., BRDF) are the foundation of many high-level satellite products for land and water monitoring. Yet it is difficult to evaluate the quality of satellite-based surface reflectances with ground-based measurements due to the spatial scale differences. In order to fill the gap, here we develop a reference dataset of surface reflectance and BRDF at the global AERONET sites with data streams from operational geostationary sensors including Himawari 8/9 AHI, GK-2A AMI, and GOES 16/17 ABI. Taking the top-of-atmosphere (TOA) reflectance and the site measured atmospheric aerosol optical depth (AOD) as the main inputs, we apply the GeoNEX-AC algorithm to performance accurate atmospheric correction and derive 10-minute surface reflectance and daily Ross-Thick-Li-Sparse (RTLS) BRDF parameters at AERONET sites where coincident AOD measurements and TOA observations are available from 2016 (for Himawari) or 2018 (for GOES) onwards. The algorithm ensures that the retrieved surface BRDF parameters, along with the site-measured AOD, allow the atmospheric radiative transfer model, SHARM, accurately simulate the observed TOA reflectance at diurnal and longer time scales. They are our best estimates of the surface optical properties and thus can serve as the “reference” to evaluate the performance of operational atmospheric correction algorithms (where AOD is assumed unknown and needs to be retrieved). The reference BRDF also allow us to evaluate the spectral band ratios between the SWIR (e.g., 2200 nm) and the visible (e.g., 650 nm) regions, which are commonly used in operational atmospheric correction algorithms. Finally, we demonstrate that the reference dataset can be used to develop potential data synergies between different GEO satellites as well as GEO-LEO sensors.

Weile Wang↗

Spectrally Simplified Approach for Leveraging Legacy Geostationary Oceanic Observations

The use of multispectral geostationary satellites to study aquatic ecosystems improves the temporal frequency of observations and mitigates cloud obstruction, but no operational capability presently exists for the coastal and inland waters of the United States. The Advanced Baseline Imager (ABI) on the current iteration of the Geostationary Operational Environmental Satellites, termed the R Series (GOES-R), however, provides sub-hourly imagery and the opportunity to overcome this deficit and to leverage a large repository of existing GOES-R aquatic observations. The fulfillment of this opportunity is assessed herein using a spectrally simplified, two-channel aquatic algorithm consistent with ABI wave bands to estimate the diffuse attenuation coefficient for photosynthetically available radiation, K(d)(PAR). First, an in situ ABI dataset was synthesized using a globally representative dataset of above- and in-water radiometric data products. Values of K(d)(PAR) were estimated by fitting the ratio of the shortest and longest visible wave bands from the in situ ABI dataset to coincident, in situ K(d)(PAR) data products. The algorithm was evaluated based on an iterative cross-validation analysis in which 80% of the dataset was randomly partitioned for fitting and the remaining 20% was used for validation. The iteration producing the median coefficient of determination (R2) value (0.88) resulted in a root mean square difference of 0.319 m−1, or 8.5% of the range in the validation dataset. Second, coincident mid-day images of central and southern California from ABI and from the Moderate Resolution Imaging Spectroradiometer (MODIS) were compared using Google Earth Engine (GEE). GEE default ABI reflectance values were adjusted based on a near infrared signal. Matchups between the ABI and MODIS imagery indicated similar spatial variability (R2 = 0.60) between ABI adjusted blue-to-red reflectance ratio values and MODIS default diffuse attenuation coefficient for spectral downward irradiance at 490 nm, K(d)(490), values. This work demonstrates that if an operational capability to provide- ABI aquatic data products was realized, the spectral configuration of ABI would potentially support a sub-hourly, visible aquatic data product that is applicable to water-mass tracing and physical oceanography research.

Advanced Baseline Imager↗

SNPP and N20 VIIRS Thermal Emissive Bands Calibration Comparison Using the GEO-LEO Double Difference Method

The VIIRS instruments onboard the SNPP and NOAA-20 satellites have identical spatial resolutions and the same spectral bands. Similar prelaunch tests and identical on-orbit calibration algorithms established the foundation for their consistent Earth measurements. Calibration assessment and consistency comparisons are useful to maintain their performance and measurement accuracy. Simultaneous nadir overpasses (SNO) between two satellites are commonly used for a direct calibration comparison between sensors. However, there are no SNO between SNPP and NOAA20. Hence, a reference sensor or Earth measurements are normally used to bridge the comparison. As a reference, we focus on the Advanced Baseline Imager (ABI) onboard the GOES-R series spacecraft and its application to the SNPP and NOAA-20 VIIRS comparison. GOES16 and GOES17are the first two satellites of the GOES-R series and were launched on November 19, 2016, and March 12, 2018, respectively. Their operational positions are on the equator with longitudes of 75.2° West over land and 137.2° West over ocean, respectively. The ABI is the primary imaging instrument of these spacecrafts for the Earth’s weather, oceans, and environment, with observations (every 10 minutes) that provide vast data for GEO-Low Earth orbit (LEO)and LEO-LEO comparisons utilizing it as an intermediate reference sensor. VIIRS and ABI have spectrally matched bands and can have simultaneous measurements over any selected site every day. The simultaneous measurements over the same site also have various scan angles. These features provide advantages for a VIIRS-to-ABI comparison. The spectral response function difference between instruments, sites selected, and view angles will have effects on the instrument measurements. Their impacts on the calibration comparison, including the use of double differences, will be discussed. By collecting VIIRS measurements over a large range of view angles, the view angle effect will also be investigated. The collection of an ample amount of data provides an advantage for statistical analyses and potential big data applications to sensor calibration assessments. This method can also be applied to other sensor calibration comparison and performance assessments, such as GOES16 and GOES17 ABI, and Terra and Aqua MODIS.

Tiejun Chang↗

Open Source Application of Fusing Aerosol Products from GEO and LEO Satellites

Retrieving aerosol optical depths (AODs) from sun-synchronous polar orbiting (aka low earth orbit, LEO) satellites, such as MODISs, and VIIRSs, OMI, TROPOMI, etc, has become well-established as a tool for extracting information on particulate matter (PM) and related processes in the atmosphere. However, with recently launched geostationary satellites (GEO), such as GOES-16/17/18, and Himawari-8/9, and Meteosat Third Generation (MTG) they provide a much higher temporal resolution (order of 10 minutes), typically an image once or more per hour during daylight compared to LEO once per day. By combining these observations, we may be able to characterize the diurnal cycle of global AOD at the local, regional and global scale. While the science community is still exploring the new data from GEO observations, we have been thinking about how to properly combine/merge/fuse those data considering differences in their spatial and temporal resolutions. However, this poses a “Big Data” challenge. The big data challenge is not just about data storage, but also about data discoverability, and accessibility, and even more, about data migration/mirroring in the cloud-computing environment. This paper is merely showing some of the efforts and approaches we have attempted in fusing six satellites’ Level 2 aerosol data (three are from GEO (GOES-16/17 and Himawari-8), and the other three are from LEO (TERRA/MODIS, AQUA/MODIS, SNPP-VIIRS) from Dark Target (DT) aerosol retrieval algorithm. Having the on-demand capability of fusing remote sensing products onto the desired temporal and spatial domain enables researchers and application practitioners to better manipulate and work with satellite and sensor data. It is our hopeWe hope that by making such an open-source package, and the accompanying functionality, the scientific community will be granted easier access to aerosol data processing resources. The MEaSUREs Program (Making Earth System Data Records for Use in Research Environments) expands our understanding of the Earth's current system through atmospheric and surface measurements. In an effort to aid the scientific research component and improve open source methods, this project developed Python code for fusing six satellite Level 2 aerosol data (three are from geostationary satellites (GEO), and the other three are from low earth orbital satellites (LEO)) from Dark Target Aerosol Retrieval Algorithm.

Jennifer Wei↗

SatCORPS Global Cloud Composite (GCC): the Design and Delivery of A High Quality, High Resolution, Global Cloud Product Available in Near-Real Time

The NASA Satellite ClOud and Radiation Property retrieval System (SatCORPS) supports the development of an analysis ready and cloud-optimized data transformation pipeline and geospatial service enablement of a global cloud composite (GCC) product derived from global geostationary satellite imagery. This geospatial service will be available at high temporal and spatial resolution via the SatCORPS web mapping application for visualization and analysis as well as direct ingestion to common geospatial software and custom programming. The resulting global cloud composite products from the processing pipeline can then be geospatially-service enabled as ArcGIS Image Services and Open Geospatial Consortium (OGC) Web Mapping/Coverage Services for visualization and analysis via a web mapping application and common geospatial software. Near real time global observations are created through the composition of five geostationary satellites that provides modelling and forecasting communities with the capability to provide high quality and timely information to start the projection process. The Global Cloud Composite product combines information from geostationary satellites, GOES-16, GOES-17, Himawari-8, Meteosat-11 and Meteosat-9 to create a single global composite netcdf file and images using the different products within the netcdf file. The SatCORPS team, though our Global Cloud Composite (GCC) product and web-based visualization tools including Geographical Information System (GIS) services provide near real time global cloud product information to both automated processes and traditional web users that is timely and high quality derived from geostationary satellites. The Global Cloud Composite product takes advantage of the scalable processing resources provided by the AWS batch service to provide new composites every thirty minutes. Because information from each of the low earth orbiting satellites is available on schedules tuned to the specific satellite, the processing algorithm temporally composites the final dataset as each satellite’s information becomes available. The SatCORPS team has leveraged our experience using Amazon Web Services (AWS) to build a low latency high availability tool that allows end users both human and automated to acquire high quality and high-resolution Geostationary Earth Orbiting (GEO) information at zero cost to the end user. This presentation will describe how we architected and implemented the service as well as lessons learned based on our experiences both developing and operating the system. The lessons learned include how we integrated multiple services including Amazon Batch, Amazon S3 and Amazon Lambda service to create a low cost but high-performance processing system that is capable of identifying and processing the most appropriate satellite overpass information into global cloud composites. We will also describe our web-based tools including our Geographic Information System that can be used for visualization and analysis. The products from the processing can be geospatially-service enabled as ArcGIS Image Services and Open Geospatial Consortium (OGC) Web Mapping/Coverage Services for visualization and analysis via a web mapping application and common geospatial software. The SatCORPS Global Composite Cloud product provides sophisticated global composited cloud research products with very low latency that we see that as filling a rapidly growing need in the research and modelling community with no up-front nor ongoing costs associated with downloading or using the information.

AWS AMCE SMCE GCC SATCORPS GLOBAL CLOUD COMPOSITE ↗

Pyroscopegridding: Geo-Leo Aerosol Data Fusion (an Open-Source Package)

The retrieval of aerosol optical depths (AODs) from sun-synchronous polar orbiting satellites, such as MODISs, VIIRSs, OMI, TROPOMI, etc., has been widely adopted as a method for obtaining information regarding particulate matter (PM) and related atmospheric processes. However, the advent of recently launched geostationary satellites, such as GOES-16/17/18, Himawari-8/9, and Meteosat Third Generation (MTG), has led to an increased temporal resolution of AOD observations (order of 10 minutes), resulting in typically one or more images per hour during daylight hours, compared to the once-per-day observations obtained from LEO satellites. By integrating these observations, the diurnal cycle of global AOD can be characterized at local, regional, and global scales. The scientific community is still examining the novel data from geostationary satellite observations and evaluating methods for effectively merging these observations with differing spatial and temporal resolutions. This presents a significant ""Big Data"" challenge, encompassing not only data storage, but also data discoverability, accessibility, and migration within cloud computing environments. This study presents our attempts at fusing Level 2 aerosol data from six satellites, three of which are geostationary (GOES-16/17 and Himawari-8) and three of which are polar orbiting (TERRA/MODIS, AQUA/MODIS, and SNPP-VIIRS), using the Dark Target aerosol retrieval algorithm. The ability to fuse remote sensing products on demand into desired temporal and spatial domains empowers researchers and practitioners to more efficiently work with satellite and sensor data. It is our hope that through making our open-source package and accompanying functionality available, the scientific community will have improved access to aerosol data processing resources.

Jennifer Wei↗

Mapping Surface Vapor Pressure Deficits From Geostationary Satellites for Fire Weather Monitoring

The increase in the wildfires were observed globally in accordance with global warming, and to real- time monitoring of wildfire risk in broad scale is demanded for wildfire management to prevent the spread of wildfires. Scientists invented a lot of indices to assess the wildfire risk. Vapor Pressure Deficit (VPD) is one of the most important meteorological components for those indices. Compared to other components of fire weather indices, VPD can change quickly from lower risk to higher risk even in sub-hourly. Therefore, real-time fire risk monitoring requires high-resolution and high- temporal VPD spatial map. Here, we developed VPD estimation method using the GOES Advanced Baseline Imager (ABI) data. Unlike the polar-orbital satellite data, the ABI can observe target region every 10 minutes, so that we can estimate VPD for fire weather in real-time. The method used to estimate VPD is same with the algorithm of NASA Earth Exchange Gridded Daily Meteorology (NEX- GDM), which estimate meteorological variables from ground weather observation and spatial variables based on random forest (RF). We calculated RF importance to select bands of ABI as input of the model. To validate our results, we compared the spatial pattern of our VPD data with the Real- Time Mesoscale Analysis (RTMA) data over the conterminous USA. We sought possibility of applying our method to the region where no real-time high-resolution weather data is available, such as South America. The developed method can produce real-time high-resolution high-frequent VPD data in the continental scale. The derived data from GOES ABI could contribute to improve the fire weather monitoring and lead to prevent wildfires.

Hirofumi Hashimoto↗

Wind Profiling With the Airborne Doppler Aerosol Wind Lidar During the 2022 Convective Processes Experiment

The 2017 Decadal Survey for Earth Science and Applications from Space (ESAS 2017) identifies a critical need for improving our understanding of Planetary Boundary Layer (PBL) processes and air-surface fluxes as well as why clouds, convection, and heavy precipitation occur when and where they do. Lidars are uniquely capable of collecting high precision and high spatio-temporal observations that have been used for atmospheric process studies from the ground, aircraft, and space. The wind lidar team at the NASA Langley Research Center (LaRC) started the development of Doppler wind lidar more than a decade ago to demonstrate technologies required for an Earth-orbiting system to globally measure wind profiles. Since then, an airborne Doppler Aerosol WiNd (DAWN) lidar system has been developed and participated in a series of field campaigns. The Doppler Aerosol WiNd (DAWN) lidar uses atmospheric aerosol motion to derive vertical profiles of horizontal wind speed and direction beneath the aircraft. In September 2022, DAWN, along with a suite of other instruments, was flown on a NASA DC-8 as part of The Convective Processes EXperiment – Cabo Verde (CPEX-CV) field campaign. A main objective of CPEX was to obtain a comprehensive set of temperature, humidity and, particularly, wind observations over tropical waters in undisturbed conditions, Saharan dust outbreaks, and in the vicinity of scattered through organized deep convection in all phases of the convective life cycle. DAWN collected data for approximately 90 hours across 13 CPEX-CV science flights. Airborne Vertical Atmospheric Profiling System (AVAPS) dropsondes were dropped throughout the flight for profiling the atmosphere and validating the DAWN instrument. DAWN had co-located data with 347 AVAPS NRD41 dropsondes, providing 32,117 vertical levels for a comprehensive validation of DAWN wind retrievals. DAWN showed very good agreement with dropsondes of ~0.2 m/s bias and ~1.8 m/s RMS. Given this agreement, DAWN is considered to be a worthy reference dataset, and its retrievals have been compared to winds derived from GOES Atmospheric Motion Vectors (AMVs), Advanced Scatterometer winds (ASCAT), and model data from GFS, GEOS, and MERRA-2 to better understand the quality of our current models and satellite wind observations. The proposed presentation will provide a brief description of the DAWN instrument, discuss the synergistic observations collected across a wide range of atmospheric conditions sampled during the CPEX-CV flights, and a summary of comparisons between DAWN, GOES AMV, ASCAT, and model analyses/predictions, with an emphasis on the PBL.

DAWN↗