Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Combustion synthesis of Eu 2 O 3 nanomaterials with tunable phase composition and morphology

Combustion reactions in europium nitrate – acetylacetone – 2-methoxyethanol solutions and gels were investigated to produce europium (III) oxide (Eu 2 O 3 ) nanocrystalline materials and thin films. Thermal analyses of solutions indicated that the 2-methoxyethanol solvent also acts as a fuel in the absence of acetylacetone. Adding acetylacetone increases the overall heat of the reaction. Thermal analysis results revealed that the slow oxidation of unburned hydrocarbon residues follows the primary combustion reaction. Time-temperature profile measurements of the bulk combustion synthesis process in air and nitrogen atmospheres enabled the extraction of the maximum reaction temperature and the heating and cooling rates in the combustion zone. Several direct correlations exist between measured combustion parameters and the phase composition of the products. Combustion in air results in mixed-phase cubic and monoclinic nanocrystalline Eu 2 O 3 . Increasing the acetylacetone concentration in solutions increases the synthesis temperature and decreases the quantity of cubic Eu 2 O 3 . Here, the reaction of solutions in a nitrogen atmosphere or diluted with Eu 2 O 3 provides control of the product phase composition and reduces the quantity of the monoclinic phase. Transmission electron microscopy imaging shows that the Eu 2 O 3 end products are highly porous aggregates of nanocrystalline particles. Electrospraying of reactive solutions onto different substrates followed by short annealing makes the preparation of Eu 2 O 3 materials with diverse morphologies possible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rapid scalable plasma processing of thin-film Li–La–Zr–O solid-state electrolytes

Solid-state electrolytes, such as lithium lanthanum zirconium oxide (LLZO), show promise as technologies for next-generation high-energy-density batteries, but commercial development has been hindered by a lack of scalable processing methods. Current fabrication methods are costly or require long annealing steps to create dense films. We report an atmospheric pressure blown-arc nitrogen plasma jet process to rapidly form sub-micrometer-thick, dense amorphous LLZO (a-LLZO) films from sol-gel precursors. Films are processed in less than 2 min, an order of magnitude faster than what has previously been reported. We demonstrate 500-nm-thick a-LLZO films processed at 350°C with an ionic conductivity of 2 × 10 −6 S/cm at 30°C and 2 × 10 −3 S/cm at 100°C and a conductance of 19 S at 100°C, the highest conductance of any LLZO phase to date. Here, the films exhibit outstanding smooth surface morphology with low defectivity, advancing atmospheric plasma processing as a scalable processing method for solid-state electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

Enhancing membrane performance for CO 2 capture from flue gas with ultrahigh MW polyvinylamine

Membranes for post-combustion CO 2 capture are required to have a high CO 2 permeance due to the limited driving force. For facilitated transport membranes synthesized with polyvinylamine (PVAm), a defect-free selective layer of <200 nm is usually required to render sufficient permeance with high CO 2 /N 2 selectivity. In order to meet such a demand through the knife-coating process, the coating solution needs to have a high viscosity at a relatively low concentration to minimize its penetration into the substrate. The demand was met by synthesizing PVAm with an ultrahigh molecular weight (MW) via inverse emulsion polymerization (IEP) in this study. Compared to solution polymerization, IEP isolates the reaction in inverse micelles suspended in a continuous organic phase, which allows excellent dissipation of the heat generated by the reaction and reduces gel formation drastically. The polymerization parameters, including monomer concentration, initiator concentration, and reaction temperature, were investigated to obtain the optimal MW of PVAm for membrane performance. As compared to solution polymerization, IEP enhanced the MW of PVAm from 1.2 to 12.7 MDa, which minimized the penetration of the coating solution into the substrate and hence the extra mass transfer resistance. The effect of MW and degree of hydrolysis of PVAm on the membrane transport properties were studied. Furthermore, by employing PVAm with a MW of 12.7 MDa to strengthen the polymer matrix, the loading of piperazine glycinate in the membrane was increased up to 85 wt.%. In conclusion, the resultant membrane achieved a CO 2 permeance of 839 GPU and a CO 2 /N 2 selectivity of 161 at the typical flue gas temperature of 57°C.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Carbon molecular sieve hollow fiber membranes derived from dip-coated precursor hollow fibers comprising nanoparticles

We report a novel approach to economically fabricate dual-layer composite nanoparticle-containing carbon molecular sieve (CMS) hollow fiber membranes having excellent gas separation performance. The economically favored process comprises dip coating engineered support layer fibers to form a dense skin layer in a CMS precursor. The coated fibers are then pyrolyzed to form a high-performance CMS hollow fiber membrane. The nano-particle containing composite carbon molecular sieve hollow fiber membranes showed very attractive selectivities and productivities. As a result, this work shows how to produce high performance CMS hollow fiber membrane by coating, which exceeds that achieved with the standard sol-gel support stabilization technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis of Na + -gated nanochannel membranes for the ammonia (NH 3 ) separation

Na + -gated nanochannel membranes were synthesized on α-Al 2 O 3 supports by secondary growth for ammonia (NH 3 ) separation from a mixture gas containing NH 3 , hydrogen (H 2 ) and nitrogen (N 2 ) at high temperature and pressure. Here, the effects of synthesis parameters (number of seeding steps, aging time, synthesis time, and Si/Al ratio) on membrane properties were investigated by characterization and gas permeation testing. Under the optimized condition (two-time seeding, 8 h aging time, 5 h synthesis time, and gel composition of 1.05 Al 2 O 3 : 5 SiO 2 : 50 Na 2 O: 100 H 2 O), the best membranes achieved NH 3 /H 2 and NH 3 /N 2 selectivities of 328 ± 60 and 1106 ± 207, respectively at 200 °C and 21 bar. Separation performance of the membrane was shown to be highly dependent on the permeances of N 2 and H 2 , which were greatly influenced by the membrane quality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrathin polyorganosilica membranes synthesized by oxygen-plasma treatment of polysiloxanes for H 2 /CO 2 separation

Oxygen plasma treatment of polydimethylsiloxane (PDMS) induces an ultrathin polyorganosilica (POSi) layer (<10 nm) on top of a PDMS membrane, leading to excellent H 2 /gas separation properties and providing a rapid and scalable way to fabricate robust silica membranes compared with conventional high-temperature and time-consuming sol-gel methods. Here, we thoroughly investigate POSi membranes derived from poly (dimethylsiloxane-co-methylhydroxidesiloxane) (poly (DMS-co-MHOS)) containing -SiOH groups that can be more easily converted to silica networks than the -SiCH 3 in PDMS. Further, the effect of the polysiloxane structure and plasma treatment conditions (including plasma generating powers, oxygen flowrate, chamber pressure, and treatment time) on the silica chemistry, structure, and H 2 /CO 2 separation properties are systematically determined to derive structure/property relationships. An optimized membrane exhibits H 2 permeance of 880 GPU and H 2 /CO 2 selectivity of 67 at 150 °C, superior to state-of-the-art polymeric membranes. The membrane retains H 2 /CO 2 selectivity as high as 46 when challenged with simulated syngas containing 2.8 mol% water vapor at 150 °C, demonstrating the potential of these POSi membranes for practical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mechanism and kinetic study of rare earth extraction from allanite by direct acid leaching

Direct acid leaching was conducted to recover rare earth elements (REEs) from an allanite ore assaying 9,861.4 ppm of REEs. The effects of operational variables such as acid type, sulfuric acid (H 2 SO 4 ) concentration, temperature, solid/liquid (S/L) ratio, and particle size on the total REE (TREE) recovery were systematically examined. The REE mineralogy and the involved leaching mechanisms were investigated by microscopic characterization and residue re-leaching tests. It was found that approximately 80% of REEs was extracted using 1 M H 2 SO 4 at 75 °C for 2 h. Increasing temperature significantly improved the REE extraction, while changing acid type, H 2 SO 4 concentration, and particle size did not. The TREE recovery also gradually decreased at higher S/L ratios. The low fraction of Si leached (<4.0%) suggested that the extraction did not significantly alter the crystal structure of the dominant mineral. The leaching kinetics of REEs were fast within the first 10 min, followed by a much slower stage (i.e., 10-120 min). The kinetic modeling results showed that each stage may be controlled by both chemical reaction and diffusion (i.e., mix control). The activation energies for REE leaching using 1 M H 2 SO 4 in the 0-10 min and 10-120 min were determined to be 20.3 and 10.8 kJ/mol, respectively. Finally, the residue re-leaching results suggested that the fast leaching kinetics at the beginning may be explained by the preferential decomposition of metamict allanite rather than the formation of silica gel, while the following slower leaching stage was due to the dissolution of difficult-to-leach REE-bearing minerals such as well-crystallized allanite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Thermodynamic analysis of hydrogel swelling in aqueous sodium chloride solutions

Here, a comprehensive thermodynamic model is presented for swelling and salt partitioning of poly (n-isopropyl acrylamide) hydrogels in aqueous sodium chloride (NaCl) solutions at 298 K. Together with a Helmholtz energy expression for network elastic energy, a modified electrolyte Nonradom Two-Liquid activity coefficient model is used to represent both the long-range electrostatic interactions and the short-range van der Waals interactions present in the gel phase. The model parameters include one network parameter per hydrogel system plus two binary parameters per interaction pair in the polymer–solvent-salt systems. With semiquantitave agreement with experimental data for both hydrogel swelling and salt partitioning up to salt saturation, the analysis suggests the ion hydration between NaCl and water is the root cause for hydrogel deswelling in aqueous NaCl solution at high NaCl concentrations, i.e., NaCl weight fraction >0.03. On the other hand, the strong repulsive interaction between NaCl and hydrogel polymer is the dominant factor for salt partitioning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hierarchically structured MoO 2 /dopamine-derived carbon spheres as intercalation electrodes for lithium-ion batteries

A hydrogen peroxide initiated sol-gel process involving molybdenum transformation in the presence of dopamine (Dopa) hydrochloride excess produced the metastable precipitate composed of polydopamine (PDopa) spheres coated with Dopa preintercalated molybdenum oxide, (Dopa) x MoO y @PDopa. The hydrothermal treatment (HT) of the (Dopa) x MoO y @PDopa precursor resulted in the simultaneous carbonization of Dopa and molybdenum reduction generating MoO 2 nanoplatelets distributed and confined on the surface of the Dopa-derived carbon matrix (HT-MoO 2 /C). The consecutive annealing (An) of the HT-MoO 2 /C sample at 600 °C under Ar atmosphere led to the formation of MoO 2 with increased Mo oxidation state and improved structural stability (AnHT-MoO 2 /C). Annealing had also further facilitated interaction between the molybdenum-derived and Dopa-derived components resulting in the modification of the carbon matrix confirmed by Raman spectroscopy. Morphology of both materials is best described as Dopa-derived carbon spheres decorated with MoO 2 nanoplatelets. These integrated metal oxide and carbon structures were tested as electrodes for lithium-ion batteries in the potential window that corresponds to the intercalation mechanism of charge storage. The AnHT-MoO 2 /C electrode showed enhanced electrochemical activity, with an initial specific discharge capacity of 260 mAh/g and capacity retention of 67% after 50 cycles, compared to the HT-MoO 2 /C electrode which exhibited an initial specific discharge capacity of 235 mAh g –1 and capacity retention of 47% after 50 cycles. The rate capability experiments revealed that the capacity of 93 mAh/g and 120 mAh/g was delivered by the HT-MoO 2 /C and AnHT-MoO 2 /C electrodes, respectively, when the current density was increased to 100 mA/g. Here, the improved specific capacity, electrochemical stability, and rate capability achieved after annealing were attributed to higher crystallinity of MoO 2 , increased oxidation state of Mo, and formation of the tighter MoO 2 /carbon contact accompanied by the annealing assisted interaction between MoO 2 and Dopa-derived carbon.

25 ENERGY STORAGE↗
DOE OSTI2025

Preparation and electrochemical properties of high-entropy oxide Li x (CrMnCoNiZn) 3-x O 4

High-entropy oxides (HEOs) have gained significant attention as anode materials for lithium-ion batteries (LIBs) due to their high theoretical specific capacity, synergistic effects of constituent elements, and enhanced structural stability induced by high entropy. Here, this study investigates the electrochemical properties of a novel series of HEOs, Li x (CrMnCoNiZn) 3-x O 4 , synthesized via the sol-gel method. As lithium content increases, the electrochemical lithium storage performance of the HEOs improves, attributed to the rise in high-valence states and oxygen vacancies. The high valence state of elements facilitates greater electron transfer, enhancing the specific capacity during lithium insertion. Additionally, a higher concentration of oxygen vacancies boosts ionic conductivity and lithium ion diffusion kinetics, leading to superior electrochemical performance. Among the synthesized materials, Li 0.11 (CrMnCoNiZn) 2.89 O 4 exhibited the best performance, delivering a discharge capacity of 365 mAh·g −1 after 100 cycles at 100 mA·g −1 , 257 mAh·g −1 after 1000 cycles at 1 A·g −1 , and a rate capacity of 196 mAh·g −1 at 2 A·g −1 . The Li + diffusion coefficient reached 2.78 × 10 −15 cm 2 ·s −1 . This work not only deepens the understanding of HEOs' electrochemical behavior in LIBs but also provides insights into the impact of lithium ion substitution on their performance.

25 ENERGY STORAGE↗
DOE OSTI2023

All-polymer nanocomposites having superior strength, toughness and ultralow energy dissipation

Toughening polymers has attracted significant interest. Traditionally, polymer toughness is enhanced by constructing polymer networks or introducing sacrificial bonds into the chains between crosslink points. These strategies, though, introduce pronounced energy dissipation and associated heat, both of which are undesirable under long-term cyclic loading, for example at the interface of implants in the human body. By incorporating single-chain nanoparticles (SCNPs) into linear polymer chains to generate all-polymer nanocomposites (APNCs), we have been able to achieve high strength, high toughness with low energy dissipation. Using a combination of simulation and experimental results, we are advancing a “SCNPs effect” where tightly cross-linked SCNPs produce a modulus contrast to achieve strengthening and toughening. Benefitting from the soft interface, the penetrable and deformable SCNPs cause the surrounding polymer chains to move in concert, significantly reducing the interfacial friction to achieve low energy dissipation. The intramolecular cross-linking of the SCNPs and adhesion between the SCNPs and polymer matrix are critical for realizing such high-performance systems. Based on a Gaussian regression model and back propagation (BP) neural network, the mechanical strength can be predicted and is supported by simulations. Finally, the APNC concept described can be applied to elastomers and gels, broadening its utilization in high-cycle and low-dissipation applications, like soft robots, flexible sensors and cartilage replacements, and artificial heart valves.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synthesis and Characterization of Lignin-grafted-poly(ε-caprolactone) from Different Biomass Sources

Modification of lignin with poly(ε-caprolactone) is a promising approach to valorize industrial low-value lignins and to advance the bioeconomy. We have synthesized lignin grafted poly(ε-caprolactone) (lignin-g-PCL) copolymers via ring-opening polymerization of ε-caprolactone with different types of lignins of varying botanical sources (G-type pine lignin, S/G-type poplar lignin, and C-type Vanilla seeds lignin) and lignin extraction methods (Kraft and ethanol organosolv pulping). The lignin-g-PCL copolymer showed remarkably improved compatibility and dispersion in acetone, chloroform, and toluene in comparison to non-modified lignins. The structure and thermal properties of the lignin-g-PCL were investigated using Fourier-transform infrared spectroscopy (FTIR), 31 P nuclear magnetic resonance (NMR), 2D heteronuclear single quantum correlation (HSQC) NMR, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Furthermore, we have found that all the technical lignins were reactive to the copolymerization reaction regardless of their plant source and isolation methods. The molecular weights of the synthesized lignin-g-PCL copolymers were positively correlated with the content of aliphatic lignin hydroxyls, suggesting that the copolymerization reaction tends to occur preferentially at the aliphatic hydroxyls rather than the phenolic hydroxyls of lignin. Thermal analyses of the lignin-g-PCL copolymers were studied, and in general, a reduction of melting temperature and crystallinity percentage in comparison to the neat PCL was observed. However, the thermal behavior of lignin-g-PCL copolymers varied depending on the lignin feedstocks employed in the copolymerization reaction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Rare-earth-doped electrospun scheelite CaWO 4 nanofibers with excitation-dependent photoluminescence and high-linearity cathodoluminescence for ratiometric UV wavelength and radiation sensors

Scheelite structured AWO 4 compounds (A = Ba, Ca, Pb and Sr) are efficient hosts for rare-earth dopants. In this work, high-aspect-ratio AWO 4 (A = Ba, Ca, Pb and Sr) nanofibers, doped with 5 mol.% Tb and 5 mol.% Eu on A site, were synthesized using a sol-gel electrospinning technique, and their performances as a ratiometric sensor for the detection of UV light wavelength were comparatively studied. High-resolution electron microscopy reveals the presence of nanosized grains composing the nanofibers. The AWO 4 :5Tb-5Eu nanofibers exhibit strong characteristic photoluminescence (PL) and cathodoluminescence (CL) emission from both Tb 3+ and Eu 3+ ions. In the case of CaWO 4 lattice, the emission intensity ratio of Tb 3+ /Eu 3+ is found to show a linear relationship with the excitation wavelength in the tested range of 240–330 nm, with efficient energy transfer from host lattice to rare-earth ions. However, a similar result is not observed in other scheelite structured BaWO 4 , PbWO 4 , and SrWO 4 nanofibers. Here, the unique PL emission characteristics of CaWO 4 :5Tb-5Eu under different UV excitation wavelengths are due to its unique excitation band. This study reveals a potential new application of CaWO 4 :5Tb-5Eu as a fluorescent probe for UV wavelength detection. Additionally, the CL intensities from CaWO 4 :5Tb-5Eu nanofibers exhibit highly linear dependences on the applied voltage and current without saturation, which can be utilized for radiation detection.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Connecting radiation-driven changes in structural, thermal, and mechanical properties in several medical device polymers

Stemming from security threats and shortages in supply, a recent push has emerged to develop alternatives to radioisotope Cobalt-60 gamma radiation for sterilization of polymeric medical products, including electron beam (e-beam) and X-ray machine-based sources. However, before large-scale implementation, the effects of these non-isotope-based methods must be thoroughly investigated from several perspectives, involving their potential detrimental effects on the structural, thermal, and mechanical properties of polymers in medical devices. This paper investigates such effects in commonly used medical device polymers, including polypropylene homopolymer (PPH), polyolefin elastomer (POE), low-density polyethylene (LDPE), acrylonitrile butadiene styrene (ABS), and chlorobutyl rubber (CIIR). To connect radiation-driven changes in polymer structural and thermal properties and corresponding changes in mechanical properties, several characterization techniques were utilized, including gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). We found that the tensile strength of X-ray irradiated PPH, as well as X-ray, e-beam, and gamma irradiated CIIR decreases due to chain scission, which is corroborated by GPC and DMA. The GPC results of LDPE suggest chain scission, but interestingly without a corresponding decline in tensile strength. By comparison, POE and ABS appear to undergo further crosslinking with increasing irradiation dose, which generally strengthens them. Importantly, in the vast majority of the cases, there were small to no changes in properties upon changing radiation technologies (at a given dose), i.e., no radiation source dependence. However, in a few specific cases, radiation method dependencies did arise, for instance, in terms of the molecular weight of PPH being significantly increased upon X-ray irradiation, while the melting temperature, glass transition temperature, and elongation at break reduced compared to gamma. Overall, this study provides valuable insight into radiation-driven chemical and structural changes in polymers that produce changes in physical and functional properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Rheological behavior and fiber spinning of polyacrylonitrile (PAN)/Carbon nanotube (CNT) dispersions at high CNT loading

Rheological studies play an important role in polymer processing including fiber spinning. In the current work, rheological behavior has been studied for polyacrylonitrile (PAN)/carbon nanotube (CNT) dispersions in dimethyl formamide (DMF), where CNT loading is as high as 15 wt% of the total solids (polymer + CNT). The presence of CNTs increased the elastic-like and shear thinning behavior of the dispersions. The terminal slope of the log G' versus log G" curve, which was used to characterize the homogeneity of solution or dispersion, is dependent on the CNT concentration but independent of temperature between 0 and 60 °C. PAN/CNT-10 (90 wt% PAN +10 wt% CNT) and PAN/CNT-15 were gel spun at different conditions, with small diameter capillary at high shear rate and large diameter capillary at relatively low shear rate. Additionally, for PAN/CNT-10, fiber spinning with lower molecular weight polymer showed increased continuous jetting time when compared to spinning with higher molecular weight polymer. In addition, the rheological behavior of PAN/cellulose nanocrystal (CNC) dispersion with 20–60 wt% CNC was also compared to that of the PAN/CNT dispersions. PAN/CNC and PAN/CNT share similarities in both rheological behavior and fiber spinning at high filler loading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of stereochemistry on nanoscale assembly of ABA triblock copolymers with crystallizable blocks

We report on the nanoscale assembly of poly(lactic acid)-b-poly(ethylene oxide)-b-poly(lactic acid) (PLA-PEO-PLA) triblock copolymers in water, focusing on the effect of stereochemistry, where the PLA blocks are statistical copolymers of l-lactide and d-lactide with l/d ratios of 100/0, 95/5, 90/10, 85/15, 75/25, and 50/50. Small-angle neutron scattering (SANS) shows a nearly constant d-spacing as concentration varies in triblock systems with l/d ratios of 90/10 and 95/5, which we attribute to inhomogeneity in the structure of these gels, supported by previous USANS and confocal microscopy studies. The SANS data fit well to a core-shell ellipsoid form factor model with a hard-sphere structure factor. Polymeric micelles with l/d ratios from 75/25 to 85/15 displayed very high aggregation numbers, consistent with a strong interaction between PLA chains and the enhanced storage modulus observed in rheological studies of these systems. While the 90/10 and 95/5 samples showed lower aggregation numbers, their SANS profiles shows close spacing between micelles, which may promote a high fraction of intermicellar bridging chains, also consistent with a higher storage modulus. Overall, these results provide insight into the micellar assembly behavior of block copolymers with a crystallizable block, and indicate that tuning stereochemistry of PLA-based block copolymers is an effective means of modifying micellar properties for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interplay of surface energy and rheology in biopolymer soil enhancement

Biopolymers such as xanthan gum (XG) and locust bean gum (LBG) hold great potential as eco-friendly alternative soil binders. In this work, we investigated the impact of XG/LBG mixtures on the unconfined compressive strength (UCS) of sand. The high strength of dry biopolymer/sand arises from the cohesion between solid polymer films and sand particles which supported by work of adhesion calculation and soil mechanics measurement. LBG exhibits much lower sand reinforcement efficacy because polymers unevenly distributed within sand matrix. The formation of a core-shell structure in LBG/sand is an interplay of surface free energy and viscoelastic properties of polymer solutions. This structure is altered when LBG mixed with XG at varying ratios as those physical properties changed due to the complexity of polymer chains association. By probing these factors, we aim to elucidate the role of surface energies and polymer physics in governing the strength of the sand/polymer network, thereby contributing to a more comprehensive understanding polymer-sand interface. The low strength of gels (G’ ∼10Pa) cannot solely account for the increased UCS of wet sand over 10 kPa. Instead, the high strength of biopolymer/sand is more likely derived from the granular particles with biopolymers as solid glue.

36 MATERIALS SCIENCE↗