Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel Cycle Simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Thermomechanical simulation of the DIAMINO irradiation experiment using the LICOS fuel design code

Two separate-effect experiments in the HFR and OSIRIS Material Test Reactors (MTRs) are currently under Post- Irradiation Examinations (MARIOS) and under preparation (DIAMINO) respectively. The main goal of these experiments is to investigate gaseous release and swelling of Am-bearing UO2-x fuels as a function of temperature, fuel microstructure and gas production rate. First, a brief description of the MARIOS and DIAMINO irradiations is provided. Then, the innovative experimental in-pile device specifically developed for the DIAMINO experiment is described. Eventually, the thermo-mechanical computations performed using the LICOS code are presented. These simulations support the DIAMINO experimental design and highlight some of the capabilities of the code. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Determining Spent Nuclear Fuel's Plutonium Content, Initial Enrichment, Burnup, and Cooling Time

The Next Generation of Safeguards Initiative is examining nondestructive assay techniques to determine the total plutonium content in spent nuclear fuel. The goal of this research was to develop new techniques that can independently verify the plutonium content in a spent fuel assembly without relying on an operator's declarations. Fundamentally this analysis sought to answer the following questions: (1) do spent fuel assemblies contain unique, identifiable isotopic characteristics as a function of their burnup, cooling time, and initial enrichment; (2) how much variation can be seen in spent fuel isotopics from similar and dissimilar reactor power operations; and (3) what isotopes (if any) could be used to determine burnup, cooling time, and initial enrichment? To answer these questions, 96,000 ORIGEN cases were run that simulated typical two-cycle operations with burnups ranging from 21,900 to 72,000 MWd/MTU, cooling times from 5 to 25 years, and initial enrichments between 3.5 and 5.0 weight percent. A relative error coefficient was determined to show how numerically close a reference solution has to be to another solution for the two results to be indistinguishable. By looking at the indistinguishable solutions, it can be shown how a precise measurement of spent fuel isotopics can be inconclusive when used in the absence of an operator's declarations. Using this Method of Indistinguishable Solutions (MIS), we evaluated a prominent method of nondestructive analysis - gamma spectroscopy. From this analysis, a new approach is proposed that demonstrates great independent forensic examination potential for spent nuclear fuel by examining both the neutron emissions of Cm-244 and the gamma emissions of Cs-134 and Eu-154.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Summary of BISON Development Activities: NEAMS FY14 Report

This summary report contains an overview of work performed under the work package entitled “FY2014 NEAMS INL-Engineering Scale Fuel Performance & Interface with RPL Tools.” A first chapter identifies the specific FY-14 milestones, providing a basic description of the associated work and references to related detailed documentation. Where applicable, a representative technical result is provided. A second chapter summarizes substantial additional work including 1) efforts to improve numerical convergence and contact in BISON, 2) development of capability to simulate hydrogen behavior in Zircaloy cladding and 3) efforts to enhance collaborative work with the Halden Research Program. A final chapter briefly outlines planned future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Separating Stable Boron Isotopes in Uniflow Gas Centrifuges

A variant of a model of a uniflow gas centrifuge for separating a binary mixture of boron isotopes in the trifluoride form, taking account of the interaction of the rotating gas with a stationary cylindrical central body, is proposed. Expressions are obtained for the maximum admissible enrichment and separation factors and the optimal separative power as functions of the radius of the central body. It is shown that a cascade of uniflow gas centrifuges with more than 95% enrichment of boron trifluoride in terms of the {sup 10}B isotope in the requisite quantities for industry can be built in practice.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

BISON-FIPD integration enhanced low-burnup SFR metallic fuel swelling model evaluation framework

Experiments indicated that metallic fuel in sodium-cooled fast reactors (SFRs) rapidly swells radially and axially at low burnup. Despite that, prior studies have been focused on describing high burnup axial fuel elongation. With recent conventional and non-conventional metallic fuel concepts being considered for license applications, understanding multidimensional fuel swelling at a wide range of burnup levels is important to fuel analysis and qualification activities. Here, we report the development and demonstration efforts of a low-burnup SFR metallic fuel swelling model evaluation framework using the BISON advanced fuel performance code. The framework leverages the Integral Fast Reactor (IFR) program X423 experiment data through the ongoing integration project to enable standardized and automated use of legacy metallic fuel irradiation data maintained in the SFR fuel irradiation and physics database (FIPD) for BISON metallic fuel model verification and validation. In conclusion, the performance of the framework was demonstrated using the two representative metallic fuel swelling model sets implemented in BISON, with a series of insights about future advanced swelling model development.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FCRD Transmutation Fuels Handbook 2015

Transmutation of minor actinides such as Np, Am, and Cm in spent nuclear fuel is of international interest because of its potential for reducing the long-term health and safety hazards caused by the radioactivity of the spent fuel. One important approach to transmutation (currently being pursued by the DOE Fuel Cycle Research & Development Advanced Fuels Campaign) involves incorporating the minor actinides into U-Pu-Zr alloys, which can be used as fuel in fast reactors. It is, therefore, important to understand the properties of U-Pu-Zr alloys, both with and without minor actinide additions. In addition to requiring extensive safety precautions, alloys containing U and Pu are difficult to study for numerous reasons, including their complex phase transformations, characteristically sluggish phase-transformation kinetics, tendency to produce experimental results that vary depending on the histories of individual samples, and sensitivity to contaminants such as oxygen in concentrations below a hundred parts per million. Many of the experimental measurements were made before 1980, and the level of documentation for experimental methods and results varies widely. It is, therefore, not surprising that little is known with certainty about U-Pu-Zr alloys, and that general acceptance of results sometimes indicates that there is only a single measurement for a particular property. This handbook summarizes currently available information about U, Pu, Zr, and alloys of two or three of these elements. It contains information about phase diagrams and related information (including phases and phase transformations); heat capacity, entropy, and enthalpy; thermal expansion; and thermal conductivity and diffusivity. In addition to presenting information about materials properties, it attempts to provide information about how well the property is known and how much variation exists between measurements. Although the handbook includes some references to publications about modeling, its primary focus is experimental data. Most of the data has been published elsewhere (although scattered throughout numerous references, some quite obscure); however, some data is presented here for the first time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nuclear energy related capabilities at Sandia National Laboratories

Sandia National Laboratories' technology solutions are depended on to solve national and global threats to peace and freedom. Through science and technology, people, infrastructure, and partnerships, part of Sandia's mission is to meet the national needs in the areas of energy, climate and infrastructure security. Within this mission to ensure clean, abundant, and affordable energy and water is the Nuclear Energy and Fuel Cycle Programs. The Nuclear Energy and Fuel Cycle Programs have a broad range of capabilities, with both physical facilities and intellectual expertise. These resources are brought to bear upon the key scientific and engineering challenges facing the nation and can be made available to address the research needs of others. Sandia can support the safe, secure, reliable, and sustainable use of nuclear power worldwide by incorporating state-of-the-art technologies in safety, security, nonproliferation, transportation, modeling, repository science, and system demonstrations.

99 GENERAL AND MISCELLANEOUS↗

Ceramic Coatings for Clad (The C 3 Project): Advanced Accident-Tolerant Ceramic Coatings for Zr-Alloy Cladding

The goal of this NEUP-IRP project is to develop a fuel concept based on an advanced ceramic coating for Zr-alloy cladding. The coated cladding must exhibit demonstrably improved performance compared to conventional Zr-alloy clad in the following respects: During normal service, the ceramic coating should decrease cladding oxidation and hydrogen pickup (the latter leads to hydriding and embrittlement). During a reactor transient (e.g., a loss of coolant accident), the ceramic coating must minimize or at least significantly delay oxidation of the Zr-alloy cladding, thus reducing the amount of hydrogen generated and the oxygen ingress into the cladding. The specific objectives of this project are as follows: To produce durable ceramic coatings on Zr-alloy clad using two possible routes: (i) MAX phase ceramic coatings or similar nitride or carbide coatings; and (ii) graded interface architecture (multilayer) ceramic coatings, using, for instance, an oxide such as yttria-stabilized zirconia (YSZ) as the outer protective layer. To characterize the structural and physical properties of the coated clad samples produced in 1. above, especially the corrosion properties under simulated normal and transient reactor operating conditions. To perform computational analyses to assess the effects of such coatings on fuel performance and reactor neutronics, and to perform fuel cycle analyses to assess the economic viability of modifying conventional Zr-alloy cladding with ceramic coatings. This project meets a number of the goals outlined in the NEUP-IRP call for proposals, including: Improve the fuel/cladding system through innovative designs (e.g. coatings/liners for zirconium-based cladding) Reduce or eliminate hydrogen generation Increase resistance to bulk steam oxidation Achievement of our goals and objectives, as defined above, will lead to safer light-water reactor (LWR) nuclear fuel assemblies, due to improved cladding properties and built-in accident resistance, as well as the possibilities for enhanced fuel/clad system performance and longevity.

36 MATERIALS SCIENCE↗

Sigma Team for Minor Actinide Separation: PNNL FY 2010 Status Report

Work conducted at Pacific Northwest National Laboratory (PNNL) in FY 2010 addressed two lines of inquiry. The two hypotheses put forth were: 1. The extractants from the TRUEX( ) process (CMPO)( ) and from the TALSPEAK( ) process (HDEHP)( ) can be combined into a single process solvent to separate 1) the lanthanides and actinides from acidic high-level waste and 2) the actinides from the lanthanides in a single solvent extraction process. (Note: This combined process will hereafter be referred to as the TRUSPEAK process.) A series of empirical measurements performed (both at PNNL and Argonne National Laboratory) in FY 2009 supported this hypothesis, but also indicated some nuances to the chemistry. Lanthanide/americium separation factors of 12 and higher were obtained with a prototypic TRUSPEAK solvent when extracting the lanthanides from a citrate-buffered DTPA( ) solution. Although the observed separation factors are sufficiently high to design an actinide/lanthanide separation process, a better understanding of the chemistry is expected to lead to improved solvent formulations and improved process performance. Work in FY 2010 focused on understanding the synergistic extraction behavior observed for Nd(III) and Am(III) when extracted into mixtures of CMPO and HDEHP. The interaction between CMPO and HDEHP in dodecane was investigated by 31P NMR spectroscopy, and an adduct of the type CMPO•HDEHP was found to form. The formation of this adduct will reduce the effective extractant concentrations and must be taken into account when modeling metal ion extraction data in this system. Studies were also initiated to determine the Pitzer parameters for Nd(III) in lactate media. 2. Higher oxidation states (e.g., +5 and +6) of Am can be stabilized in solution by complexation with uranophilic ligands, and this chemistry can be exploited to separate Am from Cm. To test this hypothesis, the previously reported stereognostic uranophilic ligands NPB( ) and ETAC(e) were investigated. To assess the potential of these ligands to stabilize pentavalent and hexavalent actinides, stability constants were measured for complexation of these ligands to Nd(III), Np(V), and Pu(VI) in a solvent mixture consisting of 80% methanol/20% water. For comparison, an analogous non-stereognostic ligand, NTA,(f) was also examined. The ligand ETAC showed greater binding affinity for hexavalent Pu versus trivalent Nd by two orders-of-magnitude. Such selectivity was not observed for either NTA or NPB.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Oxidation and corrosion resistance of candidate Stirling engine heater-head-tube alloys

Sixteen candidate iron base Stirling engine heater head tube alloys are evaluated in a diesel fuel fired simulator materials test rig to determine their oxidation and corrosion resistance. Sheet specimens are tested at 820 C for 3500 hr in 5 hr heating cycles. Specific weight change data and an attack parameter are used to categorize the alloys into four groups; 10 alloys show excellent for good oxidation and corrosion resistance and six alloys exhibit poor or catastrophic resistance. Metallographic, X-ray, and electron microprobe analyses aid in further characterizing the oxidation and corrosion behavior of the alloys. Alloy compositions, expecially the reactive elements aluminum, titanium, and chromium, play a major role in the excellent oxidation and corrosion behavior of the alloys. The best oxidation resistance is associated with the formation of an iron nickel aluminum outer oxide scale, an intermediate oxide scale rich in chromium and titanium, and an aluminum outer oxide scale adjacent to the metallic substrate, which exhibits a zone of internal oxidation of aluminum and to some extent titanium.

Stephens, J. R.↗

RELAP5-3D Results for Phase I (Exercise 2) of the OECD/NEA MHTGR-350 MW Benchmark

The coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been initiated at the Idaho National Laboratory (INL) to provide a fully coupled prismatic Very High Temperature Reactor (VHTR) system modeling capability as part of the NGNP methods development program. The PHISICS code consists of three modules: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. As part of the verification and validation activities, steady state results have been obtained for Exercise 2 of Phase I of the newly-defined OECD/NEA MHTGR-350 MW Benchmark. This exercise requires participants to calculate a steady-state solution for an End of Equilibrium Cycle 350 MW Modular High Temperature Reactor (MHTGR), using the provided geometry, material, and coolant bypass flow description. The paper provides an overview of the MHTGR Benchmark and presents typical steady state results (e.g. solid and gas temperatures, thermal conductivities) for Phase I Exercise 2. Preliminary results are also provided for the early test phase of Exercise 3 using a two-group cross-section library and the Relap5-3D model developed for Exercise 2.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simulation and Optimization of Volatile Fatty Acid Upgrading Strategies for Sustainable Transportation Fuel Production

The multicomponent nature of and variability of biomass makes chemical upgrading via a single process stream to a single end use infeasible for most feedstocks. A more promising approach is to identify upgrading strategies (encompassing bioprocessing, catalysis, and separations) which valorize varied biomass fractions to distinct products to which each is best suited. A robust procedure to carry out this goal should incorporate comparison of various upgrading procedures as well as suitability of products to a slate of identified end uses. We applied this strategy to one biomass-derived feedstock, volatile fatty acids (VFAs) derived from wet waste arrested anaerobic digestion, by developing a computer program, VFA Upgrading to Liquid Transportation fUels Refinery Estimation (VULTURE) which evaluates VFA catalytic upgrading to liquid transportation fuels. VULTURE considers multiple separations, catalysis (ketonization, hydrogenation), and fuel application options, generating hundreds of candidate scenarios for a given VFA stream, then selects several promising strategies that optimize bio-content of products with properties best suited for target fuel types. We find that VFAs are upgraded most efficiently when separate light alcohol (C3-6) and heavy hydrocarbon or alcohol (C7-13) fractions are targeted to create gasoline and heavy-duty (diesel or jet) fuels or fuel blends. Surrogate property testing of VULTURE-recommended fuels reveals that most predictive models employed are robust, while rigorous process simulation shows that the simple unit operation assumptions used in VULTURE are largely accurate, especially for heavy-duty fuel synthesis. Techno-economic and life-cycle analyses show that VFA-derived fuels are profitable and have dramatically (=57%) lower carbon intensities than fossil analogs.

BIOMASS FUELS↗

Potential application of curium neutron detection in the high reliability safeguards approach for remotely handled nuclear facilities

The study presented in this paper is part of a series of quantitative modeling efforts to characterize the neutron flux for the major subsystems in a pyroprocessing facility. An MCNPX model has established the electroreduction process, in which uranium oxide is converted into a metal product by electrochemical methods. This process is important because the electroreduction stage is the earliest point in the system where a diversion attempt could occur. This paper will present neutron flux for a commercial batch size. The intent of this study is to determine if the magnitude of the flux is sufficiently high as to affect facility design. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ENDF/B-VIII.0 testing with AMPX and SCALE

As the new ENDF/B-VIII.0 data has continued development from its initial beta release into the final release version, it has subsequently undergone processing and testing at Oak Ridge National Laboratory with AMPX and SCALE. Each of the beta releases has been processed with AMPX to create both multigroup (MG) and continuous-energy (CE) libraries. The MG libraries were all processed using the SCALE 252-group structure. These libraries were then used with the VALID suite for benchmarking the new data library's performance against the currently distributed ENDF/B-VII.1 (VII.1)-based SCALE libraries. Here, we compare the MG and CE VALID results for the two current ENDF releases, versions VII.1 and the most recent beta release of ENDF/B-VIII.0 as of this writing (VIII.0.β4). Generally, both the MG and CE VALID aggregate results for VIII.0.β4 compare reasonably well with their VII.1-derived counterparts. As can be expected of any new ENDF release, some of the individual cases have substantially different computed neutron multiplicity (k{sub eff}) values between the two releases, although typically the differences are less than 100 percent-milli (pcm). However, changes to the plutonium cross sections have induced much larger changes in the ratio of the computed k{sub eff} to the experimental value (C/E) for thermal spectrum plutonium solution critical systems. This paper details the comparative performance of the VII.1 and VIII.0.β4 data for the broad range of test cases covered by the VALID suite. A companion paper at this conference provides details of the baseline validation of SCALE 6.2, including the first release of the VII.1 data. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Response of a Pressurized Water Reactor Dashpot Region to Commercial Drying Cycles

The purpose of this report is to document updates to the simulation of commercial vacuum drying procedures at the Nuclear Energy Work Complex at Sandia National Laboratories. Validation of the extent of water removal in a dry spent nuclear fuel storage system based on drying procedures used at nuclear power plants is needed to close existing technical gaps. Operational conditions leading to incomplete drying may have potential impacts on the fuel, cladding, and other components in the system. A general lack of data suitable for model validation of commercial nuclear canister drying processes necessitates additional, well-designed investigations of drying process efficacy and water retention. Scaled tests that incorporate relevant physics and well-controlled boundary conditions are essential to provide insight and guidance to the simulation of prototypic systems undergoing drying processes. This report documents testing updates for the Dashpot Drying Apparatus (DDA), an apparatus constructed at a reduced scale with multiple Pressurized Water Reactor (PWR) fuel rod surrogates and a single guide tube dashpot. This apparatus is fashioned from a truncated 5×5 section of a prototypic 17×17 PWR fuel skeleton and includes the lowest segment of a single guide tube, often referred to as the dashpot region. The guide tube in this assembly is open and allows for insertion of a poison rod (neutron absorber) surrogate.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Feasibility Studies on a Hexagonal-Lattice Core for a World-Class Cold Neutron Source

Cold neutrons have kinetic energies less than 5 meV and wavelengths greater than 4 Α. They can be transported over tens of meters through super-reflecting neutron guides with minimal losses. Cold neutrons are used to investigate the structure of larger molecular systems such as biological materials, polymers and aggregates, due to their preferential interaction with light elements and general ignorance towards heavy ones. Intense beams of cold neutrons are obtained from slowing down a source of thermal energy neutrons - which may be from either a research reactor or spallation neutron source - through some cryogenic moderator such as liquid hydrogen or deuterium. The present reactor at the NIST Center for Neutron Research (NCNR) - NBSR - is such a cold neutron source (CNS) facility which provides cold neutron beams for over 2,000 scientists performing various experiments annually. Feasibility studies on a replacement reactor for the NBSR are underway at NCNR with the primary purpose of optimized cold neutron production. Low enriched uranium (LEU) fuel is required for the new reactor to conform to nuclear non-proliferation agreements. The low thermal power rate of 20 MW is taken as a priority with a fuel cycle length designated as 30 days. A horizontal split compact core with a large D{sub 2}O reflector tank is currently proposed and studied, with the expectation of achieving much better cold neutron performance than the present NIST reactor (NBSR). A preliminary core design has been completed using MCNP6 modeling and simulation. The physics performance characteristics of the proposed new core indicate that the new design is competitive with the most notable existing advanced cold neutron sources. In previous studies, only rectangular shaped fuel elements were considered because they have similar external dimensions as the NBSR fuel elements. However, from a compact core standpoint, a square lattice is not the most effective geometry for a tight configuration. Moreover, the previous studies also showed that the square lattice of the fuel elements left little room to accommodate vertical insertion blade-type control elements. As a result, all control blades had to reside in the D{sub 2}O reflector, which made the design cumbersome (in that case the control blades must penetrate the reflector tank) and neutronically uneconomical. In this summary, a preliminary feasibility study on a hexagonal core lattice is performed to render an alternative geometry for the new reactor (HEX core) to provide sufficient space for the control elements. The identical LEU fuel (U{sub 3}Si{sub 2}/Al) with U-235 enrichment 19.75% is used in the new design. The maximum thermal power and fuel management scheme remain the same as the previous investigations (three 30-day cycled batches for each batch of three fuel elements). The horizontal split compact core concept is also applied in the hexagonal lattice core design, with the objective of creating maximum thermal flux traps between the split core halves. A detailed description of the model for the hexagonal lattice core is presented in the following section. The HEX core design achieves a number of successes over the previous split-core design. Given that much of the motivation of this work was based on implementation of control blades into a concept which lacked them, it is notable that neutron economy was well-preserved in the process of achieving conservatively effective reactivity control; start-up k{sub eff} was in fact increased by 0.23% and peak thermal flux increased by ∼25%. A useful metric in determining the efficacy of resources towards creating an environment for the production of cold neutrons - dubbed the 'quality factor' (QF) - is the ratio of peak thermal neutron flux in a system to the total thermal power produced. Because HEX core's objectives are very focused in comparison to existing research reactors, it is fitting to pursue a design which out-performs all others in terms of some specific performance metric, namely this QF term. While HFIR remains the greatest cold neutron source in the world, it does so through use of HEU fuel (which will be replaced with LEU in the near future), and suffers a greater level of fast neutron contamination that is expected from the HEX design. The new core design achieves these successes due to the hexagonal lattice fuel arrangement, a 13.5% reduction in cladding mass, and a 13.1% reduction in fuel element volume. In spite of a 5.5% reduction in fuel mass, no compromises in reactor performance were noted. Provided the favorable characteristics shown of the control blade design, refueling intervals longer than the prescribed 30 days may be considered. It can be speculated that with these quantitative benefits, the overall capital and continuous costs of the HEX core design will be less than the previously proposed split-core concept.

07 ISOTOPE AND RADIATION SOURCES↗

Integration of facility modeling capabilities for nuclear nonproliferation analysis

Developing automated methods for data collection and analysis that can facilitate nuclear nonproliferation assessment is an important research area with significant consequences for the effective global deployment of nuclear energy. Facility modeling that can integrate and interpret observations collected from monitored facilities in order to ascertain their functional details will be a critical element of these methods. Although improvements are continually sought, existing facility modeling tools can characterize all aspects of reactor operations and the majority of nuclear fuel cycle processing steps, and include algorithms for data processing and interpretation. Assessing nonproliferation status is challenging because observations can come from many sources, including local and remote sensors that monitor facility operations, as well as open sources that provide specific business information about the monitored facilities, and can be of many different types. Although many current facility models are capable of analyzing large amounts of information, they have not been integrated in an analyst-friendly manner. This paper addresses some of these facility modeling capabilities and illustrates how they could be integrated and utilized for nonproliferation analysis. The inverse problem of inferring facility conditions based on collected observations is described, along with a proposed architecture and computer framework for utilizing facility modeling tools. After considering a representative sampling of key facility modeling capabilities, the proposed integration framework is illustrated with several examples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

MCNP LWR Core Generator

The reactor core input generator allows for MCNP input files to be tailored to design specifications and generated in seconds. Full reactor models can now easily be created by specifying a small set of parameters and generating an MCNP input for a full reactor core. Axial zoning of the core will allow for density variation in the fuel and moderator, with pin-by-pin fidelity, so that BWR cores can more accurately be modeled. LWR core work in progress: (1) Reflectivity option for specifying 1/4, 1/2, or full core simulation; (2) Axial zoning for moderator densities that vary with height; (3) Generating multiple types of assemblies for different fuel enrichments; and (4) Parameters for specifying BWR box walls. Fuel pin work in progress: (1) Radial and azimuthal zoning for generating further unique materials in fuel rods; (2) Options for specifying different types of fuel for MOX or multiple burn assemblies; (3) Additional options for replacing fuel rods with burnable poison rods; and (4) Control rod/blade modeling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗