Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUID MECHANICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

On the accuracy of simulations of turbulence

The widely recognized issue of adequate spatial resolution in numerical simulations of turbulence is studied in the context of two-dimensional magnetohydrodynamics. The familiar criterion that the dissipation scale should be resolved enables accurate computation of the spectrum, but fails for precise determination of higher-order statistical quantities. Examination of two straightforward diagnostics, the maximum of the kurtosis and the scale-dependent kurtosis, enables the development of simple tests for assessing adequacy of spatial resolution. The efficacy of the tests is confirmed by examining a sample problem, the distribution of magnetic reconnection rates in turbulence. Oversampling the Kolmogorov dissipation scale by a factor of 3 allows accurate computation of the kurtosis, the scale-dependent kurtosis, and the reconnection rates. These tests may provide useful guidance for resolution requirements in many plasma computations involving turbulence and reconnection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

3D MHD Simulations of accreting neutron stars: evidence of QPO emission from the surface

3D Magnetohydrodynamic simulations show that when matter accretes onto neutron stars, in particular if the misalignment angle is small, it does not constantly fall at a fixed spot. Instead, the location at which matter reaches the star moves. These moving hot spots can be produced both during stable accretion, where matter falls near the magnetic poles of the star, and unstable accretion, characterized by the presence of several tongues of matter which fall on the star near the equator, due to Rayleigh-Taylor instabilities. Precise modeling with Monte Carlo simulations shows that those movements could be observed as high frequency Quasi Periodic Oscillations. We performed a number of new simulation runs with a much wider set of parameters, focusing on neutron stars with a small misalignment angle. In most cases we observe oscillations whose frequency is correlated with the mass accretion rate M. Moreover, in some cases double QPOs appear, each of them showing the same correlation with M.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Propagation of energetic electrons in a hollow plasma fiber

Transport of energetic electrons in a hollow plasma fiber is investigated. The high-current electron beam induces in the fiber strong radial electric fields and azimuthal magnetic fields on the inner and outer surfaces of the hollow fiber. The hot electrons are pushed out by the surface magnetic field and returned into the fiber by the sheath electric field. Imbalance of the latter fields can drive chaotic oscillations of electrons around the fiber wall. Intense thin return-current layers inside both the inner and outer wall surfaces are observed. This enhances local joule heating around both surfaces by the return current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Product gas evolution above planar microstructured model catalysts--A combined scanning mass spectrometry, Monte Carlo, and Computational Fluid Dynamics study

The transport and distribution of reaction products above catalytically active Pt microstructures was studied by spatially resolved scanning mass spectrometry (SMS) in combination with Monte Carlo simulation and fluid dynamics calculations, using the oxidation of CO as test reaction. The spatial gas distribution above the Pt fields was measured via a thin quartz capillary connected to a mass spectrometer. Measurements were performed in two different pressure regimes, being characteristic for ballistic mass transfer and diffusion involving multiple collisions for the motion of CO{sub 2} product molecules between the sample and the capillary tip, and using differently sized and shaped Pt microstructures. The tip height dependent lateral resolution of the SMS measurements as well as contributions from shadowing effects, due to the mass transport limitations between capillary tip and sample surface at close separations, were evaluated and analyzed. The data allow to define measurement and reaction conditions where effects induced by the capillary tip can be neglected (''minimal invasive measurements'') and provide a basis for the evaluation of catalyst activities on microstructured model systems, e.g., for catalyst screening or studies of transport effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of velocity shear and ion viscosity profile in a magnetohydrodynamic plasma jet

Time-dependent, two-dimensional profiles of the axial flow velocity, density, electron temperature, and magnetic field components are measured at two axial locations in a screw pinch plasma column of the reconnection scaling experiment. The results show that the ion momentum flux for a given column radius is dissipated by the ion-ion Coulomb scattering viscosity due to a significant radial shear of the axial velocity. By comparing the terms of the magnetohydrodynamic momentum balance equation, radial profile of ion viscosity is determined. Chord-integrated ion temperature measurements performed at several radial locations using Doppler broadening spectroscopy show ion temperature of about 1 eV. Measured ion viscosity agrees within a factor of 2 with the classical Braginskii expectations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Torsional magnetic reconnection at three dimensional null points: A phenomenological study

Magnetic reconnection around three dimensional (3D) magnetic null points is the natural progression from X-point reconnection in two dimensions. In 3D the separator field lines of the X-point are replaced with the spine line and fan plane (the field lines which asymptotically approach or recede from the null). In this work analytical models are developed for the newly classified torsional spine and torsional fan reconnection regimes by solving the steady state, kinematic, resistive magnetohydrodynamic equations. Reconnection is localized to around the null through the use of a localized field perturbation leading to a localized current while a constant resistivity is assumed. For the torsional spine case current is found to localize around the spine leading to a spiraling slippage of the field around the spine and out along the fan. For the torsional fan case current is found to be localized to the fan plane leading again to a spiraling slippage of the field. In each case no flux is transported across either the spine or the fan. An intermediate twist is then introduced and a link is established between the two regimes. We find that for a general twist plasma flows associated with both torsional spine and fan appear in distinct regions. As such we suggest that the ''pure'' flows of each are extreme cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear lower-hybrid oscillations in cold plasma

In a fluid description nonlinear lower-hybrid oscillation have been studied in a cold quasineutral magnetized plasma using Lagrangian variables. An exact analytical solution with nontrivial space and time dependence is obtained. The solution demonstrates that under well defined initial and boundary conditions the amplitude of the oscillations increases due to nonlinearity and then comes back to its initial condition again. These solutions indicate a class of nonlinear transient structures in magnetized plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On vortex dust structures in magnetized dusty plasmas

To explain the generation of vortex patterns of dust grains in a magnetized dusty plasma [Huang et al., Plasma Sci. Technol. 9, 1 (2007)], a time dependent nonlinear model that describes vortices as a result of an instability is proposed. Grain-grain as well as grain-ion interactions, particle attachment, and grains drift and diffusion are key elements in the present model. It is found that the latter reproduces the experimental results quite well, whereas the stability analysis shows that the vortex core is grain size dependent.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computation of two-dimensional electric field from the ion laser induced fluorescence measurements

This paper presents a method of computing two-dimensional electric field from ion laser induced fluorescence (LIF) measurements in a plasma flow. The expression for the field is derived by taking velocity moments of the Boltzmann equation for ions. It was found that the pressure tensor, related to the width of the ion velocity distribution, plays a critical role in the computation of the electric field. Even with the assumption of cold ion flow, the pressure tensor contribution may be significant when velocity spread is caused by other forces. Such a situation occurs in the flow of a Hall thruster, where velocity spread is caused by the ions born at different potentials. LIF measurements of the cylindrical hall thruster plume were used to demonstrate practical application of the derived method. Whenever the pressure tensor components are small as compared to the mean ion drift velocity, the electric field calculations reduce to a simple expression given in terms of mean ion drift velocity and its divergence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetohydrodynamic waves in the presence of relative motion between two populations of a plasma system

The paper investigates the role of relative motion between the fluid components of a plasma model, which is simulated by concatenation of two anisotropic magnetohydrodynamic (MHD) fluids, on the propagation of low-frequency waves and instabilities. The gyrotropic pressure of both the MHD components is given by generalized polytropic laws that allow the system to reduce to a variety of states. The linearized analysis is carried out and dispersion relation is derived using the normal mode technique. The dispersion relation, which gives numerous earlier results as special cases, is discussed both analytically as well as numerically for parameters appropriate for the space plasma. It is found that the relative motion between the two components, besides modifying the condition for fire-hose instability, causes the concatenated system to exhibit different kinds of relative ordering of the magnitudes of phase speeds of the various MHD modes in the directions parallel and antiparallel to the magnetic field. The relative motion between the components also influences the phase relationship between density and magnetic field fluctuations for the various compressive modes in the background ambient plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast magnetic reconnection in three-dimensional magnetohydrodynamics simulations

A constructive numerical example of fast magnetic reconnection in a three-dimensional periodic box is presented. Reconnection is initiated by a strong, localized perturbation to the field lines. The solution is intrinsically three-dimensional and its gross properties do not depend on the details of the simulations. {approx}30% of the magnetic energy is released in an event which lasts about one Alfven time, but only after a delay during which the field lines evolve into a critical configuration. The physical picture of the process is presented. The reconnection regions are dynamical and mutually interacting. In the comoving frame of these regions, reconnection occurs through a x-like point, analogous to Petschek reconnection. The dynamics appear to be driven by global flows, not local processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transition in electron transport in a cylindrical Hall thruster

Through the use of high-speed camera and Langmuir probe measurements in a cylindrical Hall thruster, we report the discovery of a rotating spoke of increased plasma density and light emission which correlates with increased electron transport across the magnetic field. As cathode electron emission is increased, a sharp transition occurs where the spoke disappears and electron transport decreases. This suggests that a significant fraction of the electron current might be directed through the spoke.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of transparent and nontransparent regimes of implosion in star wire arrays

Star wire arrays were used to control the imploding plasma flows and study plasma interpenetration. These arrays consisted of linear 'rays' aligned azimuthally and extending from the vertical axis. Star arrays with two close located wires ('gates') instead of a single wire on the inner cylinder were studied for transparent and nontransparent regimes of propagation of imploding plasma through the gates. Nontransparent mode of collision is typical for regular star wire arrays and it was also observed in Al stars with gate wires of regular length and with the gate width of 0.3-2 mm. The cascade process of implosion in stars and trapping of imploding plasma in 1-2 mm gates were modeled with the three-dimensional resistive magnetohydrodynamics code. The intermediate semitransparent mode of collision was observed in Al stars with long Al 'gate' wires. A transparent mode was observed in Al stars with long stainless steel or W gate wires. Applications of wire arrays with controlled plasma flows are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrokinetic simulations including the centrifugal force in a rotating tokamak plasma

Tokamak experiments operate with a rotating plasma, with toroidal velocity which can be driven externally but can also arise spontaneously. In the frame that corotates with the plasma, the effects of the centrifugal force are felt through a centrifugal drift and an enhanced mirror force [Peeters et al., Phys. Plasmas 16, 042310 (2009)]. These inertial terms become important in the case of strong rotation, as is common in spherical devices, and are also important for heavy impurity ions even at small toroidal velocities. In this work, the first gyrokinetic simulations including the centrifugal force in a strongly rotating plasma are presented. The enhanced mirror force redistributes density over a flux surface and modifies the trapping condition, destabilizing trapped electron modes. At intermediate scales this can result in promotion of the trapped electron mode over the ion temperature gradient (ITG) mode as the dominant instability, which under marginal conditions could result in an enhanced electron heat flux. The centrifugal drift acts to damp the residual zonal flow of the geoacoustic mode, while its frequency is increased. For nonlinear ITG dominated turbulence, increased trapped electron drive and reduced zonal flow lead to an increase in ion heat diffusivity if the increased rotation is not accompanied by rotational shear stabilization. An increased fraction of slow trapped electrons enhances the convective particle pinch, leading to an increase in the steady state density gradient with strong rotation. Linear ITG mode results show an increased pinch of heavy trace impurities due to their strong centrifugal trapping.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Zonal flow modes in a tokamak plasma with dominantly poloidal mean flows

The zonal flow eigenmodes in a tokamak plasma with dominantly poloidal mean flows are theoretically investigated. It is found that the frequencies of both the geodesic acoustic mode and the sound wave increase with respect to the poloidal Mach number. In contrast to the pure standing wave form in static plasmas, the density perturbations consist of a standing wave superimposed with a small amplitude traveling wave in the poloidally rotating plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrostatic drift-wave instability in a nonuniform quantum magnetoplasma with parallel velocity shear flows

The propagation of high and low frequency (in comparison with the cyclotron frequency) electrostatic drift-waves is investigated in a nonuniform, dense magnetoplasma (composed of electrons and ions), in the presence of parallel shear flow, by employing the quantum magnetohydrodynamic (QMHD) model. Using QMHD model, a new set of equations is presented in order to investigate linear properties of electrostatic drift-waves with sheared plasma flows for dense plasmas. In this regard, dispersion relations for coupled electron-thermal and drift-ion acoustic modes are derived and several interesting limiting cases are discussed. For instance, it is found that sheared ion flow parallel to the external magnetic field can drive the quantum drift-ion acoustic wave unstable, etc. The present investigation may have relevance in dense astrophysical environments where quantum effects are significant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Forced turbulence in large-eddy simulation of compressible magnetohydrodynamic turbulence

We present the large-eddy simulation method for studying forced compressible magnetohydrodynamic turbulence. The proposed method is based on a solution of the filtered basic equations of magnetohydrodynamics by finite-difference methods and on a linear representation of the driving forces in the momentum conservation equation and the magnetic induction equation. These forces supply the production of kinetic and magnetic energies. The emphasis is placed upon the important, and not investigated, question about the ability of the large-eddy simulation approach to reproduce Kolmogorov and Iroshnikov-Kraichnan scale-invariant spectra in compressible magnetohydrodynamic flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ideal and resistive edge stability calculations with M3D-C{sup 1}

Growth rates of edge localized modes for various benchmark equilibria, including a diverted equilibrium, are calculated using the nonideal fluid code M3D-C{sup 1}. Growth rates calculated by M3D-C{sup 1} in the ideal limit are found to agree with those calculated by ideal magnetohydrodynamics codes. The effects of nonuniform density and resistivity profiles are explored, as well as the sensitivity of growth rates to the position of the ideal vacuum-plasma interface. Growth rates of the diverted equilibrium are found to be particularly sensitive to moving this interface inward from the separatrix, but less sensitive to extending the plasma region beyond the separatrix. The resistivity profile within the plasma is found not to affect growth rates significantly; however, growth rates may be greatly reduced by treating the outer region as a resistive plasma instead of an ideal vacuum. Indeed, it is found that for typical scrape-off layer (SOL) temperatures, the resistive SOL model behaves more like an ideal plasma than a vacuum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗