Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Effect of Fuel Reactivity and End- Gas Temperature on Autoignition and Flame Propagation Rate in Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Knock in spark-ignited (SI) engines is initiated by autoignition in the unburned gases upstream of spark-ignited, propagating, turbulent premixed flames. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (n-heptane/isooctane) blends of varying reactivity were ignited using an Nd:YAG laser over a range of compressed temperatures and pressures, all in excess of 691 K and 18.8 bar. High-speed pressure measurements and schlieren images indicated the presence of EGAI in the unburned gases upstream of spherical, outwardly propagating flames. The fraction of the total heat release attributed to EGAI was found to vary with fuel reactivity and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, measured using schlieren imaging, did not vary strongly with fuel reactivity but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates agreed with one-dimensional premixed laminar flame speed computations performed at the same conditions.

Zdanowicz, Andrew↗

End-Gas Autoignition Fraction and Flame Propagation Rate in Laser-Ignited Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Engine knock in spark-ignited (SI) engines is initiated by autoignition and detonation in the unburned gases (i.e., end-gas) upstream of the spark-ignited, propagating, turbulent premixed flame. Knock propensity of fuel/air mixtures is quantified by research octane number (RON), motor octane number (MON), or methane number (MN; for gaseous fuels), which are typically measured using single-cylinder, variable compression ratio research engines. In this study, we demonstrate the ability to evaluate knock propensity of SI fuels via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (PRF; n-heptane/isooctane) blends of varying reactivity (50 ≤ PRF ≤ 100) were ignited using an Nd:YAG laser at five discrete temperature and pressure conditions, all in excess of 485 K and 16.75 bar. Laser ignition produced outwardly-propagating, laminar premixed flames. High-speed pressure measurements, paired with high-speed Schlieren imaging, clearly indicated the presence of EGAI. The fraction of the total heat release attributed to EGAI (e.g. EGAI fraction) varied inversely with octane number. EGAI fraction and flame propagation rate were both influenced by the magnitude of convection in the unburned gases upstream of the propagating flame caused by variation in piston timing. Experiments were accompanied by three-dimensional computational modeling with detailed chemical kinetics performed using CONVERGETM. The model results reveal low-temperature heat release and hydrogen peroxide formation in the end-gas upstream of the propagating laminar flame. Low-temperature heat release increases the temperature and degree of chain branching in the end-gas and ultimately leads to EGAI.

End-Gas Autoignition, Engine Knock, Rapid Compress↗

Effect of Fuel Reactivity and End-Gas Temperature on Autoignition and Flame Propagation Rate in Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Knock in spark-ignited (SI) engines is initiated by autoignition in the unburned gases upstream of spark-ignited, propagating, turbulent premixed flames. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (n-heptane/isooctane) blends of varying reactivity were ignited using an Nd:YAG laser over a range of compressed temperatures and pressures, all in excess of 691 K and 18.8 bar. High-speed pressure measurements and schlieren images indicated the presence of EGAI in the unburned gases upstream of spherical, outwardly propagating flames. The fraction of the total heat release attributed to EGAI was found to vary with fuel reactivity and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, measured using schlieren imaging, did not vary strongly with fuel reactivity but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates agreed with one-dimensional premixed laminar flame speed computations performed at the same conditions.

End-Gas Autoignition, Engine Knock, Rapid Compress↗

DNS of Hydrodynamic Instabilities of Laminar H2/O2/N2 Flames at Elevated Pressure

The atypical combustion properties of hydrogen have long provided an interest for hydrogen-enriched combustion, emphasized in recent years by increasingly stringent emission regulations. Significant work has been focused on the small hydrocarbon(C1-C3)/hydrogen blends, but much less is known about the effect of hydrogen on heavier hydrocarbon combustion, of interest for the aviation and automotive industry. In this work, we perform direct numerical simulations (DNS) of spherically expanding laminar n-dodecane/H2 flames in a constant-volume vessel at elevated pressure and a range of hydrogen seeding levels. A low Mach number model is used to represent the gas and flame dynamics allowing for a temporally varying, spatially homogeneous pressure field, while also enabling numerical evolution of the system numerically at time step sizes governed by the advective CFL limit rather than acoustic processes. We use an adaptive mesh refinement (AMR) approach to tackle the large separation of scales associated with high pressure premixed flame surfaces propagating in a laboratory-scale closed domain. We incorporate detailed chemistry and transport models for the reacting flow and focus the analysis on the effects of the pressure rise on the flame propagation characteristics and morphology as the hydrogen content is increased. The presence of fast diffusive H2 and the pressure rise results in dramatic thinning of the flame and the potential onset of hydrodyanmic and theromdiffusive instabilities. We assess the potential role of these instabilities on the ability to accurately measure laminar burning speed experimentally based on the mean flame surface propagation speed.

high pressure↗

A Study of Strain Rate Effects for Turbulent Premixed Flames with Application to LES of a Gas Turbine Combustor Model

Large-scale strain rate field, a resolved quantity which is easily computable in large-eddy simulations (LES), could have profound effects on the premixed flame properties by altering the turbulent flame speed and inducing local extinction. The role of the resolved strain rate has been investigated in a posterior LES study of GE lean premixed dry low NOx emissions LM6000 gas turbine combustor model. A novel approach which is based on the coupling of the lineareddy model with a one-dimensional counter-flow solver has been applied to obtain the parameterizations of the resolved premixed flame properties in terms of the reactive progress variable, the local strain rate measure, and local Reynolds and Karlovitz numbers. The strain rate effects have been analyzed by comparing LES statistics for several models of the turbulent flame speed, i.e, with and without accounting for the local strain rate effects, with available experimental data. The sensitivity of the simulation results to the inflow velocity conditions as well as the grid resolution have been also studied. Overall, the results suggest the necessity to represent the strain rate effects accurately in order to improve LES modeling of the turbulent flame speed.

33 ADVANCED PROPULSION SYSTEMS↗

Characterization of a gas burner to simulate a propellant flame and evaluate aluminum particle combustion

This study details the characterization and implementation of a burner designed to simulate solid propellant fires. The burner was designed with the ability to introduce particles (particularly aluminum) into a gas flame. The aluminized flame conditions produced by this burner are characterized based on temperature and heat flux measurements. Using these results, flame conditions are quantified in comparison to other well-characterized reactions including hydrocarbon and propellant fires. The aluminized flame is also used to measure the burning rate of the particles. This work describes the application of this burner for re-creating small-scale propellant flame conditions and as a test platform for experiments that contribute to the development of a particle combustion model, particularly in propellant fires. (author)

42 ENGINEERING↗

Analysis of the flamelet concept in the numerical simulation of laminar partially premixed flames

The aim of this work is to analyze the application of flamelet models based on the mixture fraction variable and its dissipation rate to the numerical simulation of partially premixed flames. Although the main application of these models is the computation of turbulent flames, this work focuses on the performance of flamelet concept in laminar flame simulations removing, in this way, turbulence closure interactions. A well-known coflow methane/air laminar flame is selected. Five levels of premixing are taken into account from an equivalence ratio {phi}={infinity} (nonpremixed) to {phi}=2.464. Results obtained using the flamelet approaches are compared to data obtained from the detailed solution of the complete transport equations using primitive variables. Numerical simulations of a counterflow flame are also presented to support the discussion of the results. Special emphasis is given to the analysis of the scalar dissipation rate modeling. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

OH production by transient plasma and mechanism of flame ignition and propagation in quiescent methane-air mixtures

Transient plasma induced production of OH is followed in a quiescent, stoichiometric CH{sub 4}-air mixture using the planar laser induced fluorescence technique. Ignition and subsequent flame propagation, for both the transient plasma and traditional spark ignition, are observed with a high speed camera (2000 fps). The transient plasma is generated using a 70 ns FWHM, 60 kV, 800 mJ pulse. OH production was confirmed throughout the chamber volume; however, the mean number density was found to decay below 1.3 x 10{sup 14}cm{sup -3} near 100 {mu}s. Nonetheless, ignition induced by transient plasma was decidedly faster than by spark ignition. Using the high speed camera, ignition initiated by transient plasma was found to occur along the length of the anode at approximately 1 ms, leading to the formation of a wrinkled, cylindrically-shaped flame. Analysis of the flame front propagation rates shows that flames ignited by transient plasma propagate essentially at the speed consistent with well accepted literature values for the stoichiometric methane-air mixture. This supports the notion that residue plasma, if any, has little effect on flame propagation. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Experimental study of Markstein number effects on laminar flamelet velocity in turbulent premixed flames

Effects of turbulent flame stretch on mean local laminar burning velocity of flamelets, u{sub n}, were investigated experimentally in an explosion vessel at normal temperature and pressure. In this context, the wrinkling, A{sub t}/A{sub l}, and the burning velocity, u{sub t}, of turbulent flames were measured simultaneously. With the flamelet assumption the mean local laminar burning velocity of flamelets, u{sub n}=u{sub t} x (A{sub t}/A{sub l}){sup -1}, was calculated for different turbulence intensities. The results were compared to the influence of stretch on spherically expanding laminar flames. For spherically expanding laminar flames the stretched laminar burning velocity, u{sub n}, varied linearly with the Karlovitz stretch factor, yielding Markstein numbers that depend on the mixture composition. Six different mixtures with positive and negative Markstein numbers were investigated. The measurements of the mean local laminar burning velocity of turbulent flamelets were used to derive an efficiency parameter, I, which reflects the impact of the Markstein number and turbulent flame stretch - expressed by the turbulent Karlovitz stretch factor - on the local laminar burning velocity of flamelets. The results showed that the efficiency is reduced with increasing turbulence intensity and the reduction can be correlated to unsteady effects. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reconstruction of soot temperature and volume fraction profiles of an asymmetric flame using stereoscopic tomography

The present study attempts to reconstruct soot temperature and volume fraction distributions for the asymmetric diffusive flame using a tomography technique. A high-resolution camera equipped with a stereo adapter was employed to capture stereoscopic flame images, which were used to obtain monochromatic line-of-sight flame emission projections within the visible range. A matrix-decomposition-based least squares algorithm was introduced to reconstruct the emission intensity distributions in the flame sections. The retrieved intensities were used to infer local soot temperature and volume fraction. Numerical assessments show that for soot volume fraction measurement, the system signal-to-noise ratio should be larger than 62.5 dB. The proposed tomography system was found to be capable of symmetric and asymmetric flame measurements. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the influence of singlet oxygen molecules on the speed of flame propagation in methane-air mixture

The effect of the presence of singlet oxygen molecules O{sub 2}(a{sup 1}{delta}{sub g}) in a CH{sub 4}-air mixture on the speed of laminar flame propagation is considered. The known experimental data on the laminar flame speed and ignition delay are used to validate the developed kinetic model involving electronically excited oxygen molecules O{sub 2}(a{sup 1}{delta}{sub g}) and O{sub 2}(b{sup 1}{sigma}{sub g}{sup +}). Numerical simulation shows that the presence of 10% O{sub 2}(a{sup 1}{delta}{sub g}) in molecular oxygen enables to increase significantly (by a factor of 1.7) the speed of flame propagation in a fuel-lean ({phi}=0.45) methane-air mixture. The main reason for such an acceleration of flame propagation is the intensification of chain reactions due to addition of singlet delta oxygen molecules. For a fuel-rich mixture ({phi}=1.9), the growth in the flame speed is significantly smaller and attains a factor of 1.4. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear effects of stretch on the flame front propagation

In all experimental configurations, the flames are affected by stretch (curvature and/or strain rate). To obtain the unstretched flame speed, independent of the experimental configuration, the measured flame speed needs to be corrected. Usually, a linear relationship linking the flame speed to stretch is used. However, this linear relation is the result of several assumptions, which may be incorrected. The present study aims at evaluating the error in the laminar burning speed evaluation induced by using the traditional linear methodology. Experiments were performed in a closed vessel at atmospheric pressure for two different mixtures: methane/air and iso-octane/air. The initial temperatures were respectively 300 K and 400 K for methane and iso-octane. Both methodologies (linear and nonlinear) are applied and results in terms of laminar speed and burned gas Markstein length are compared. Methane and iso-octane were chosen because they present opposite evolutions in their Markstein length when the equivalence ratio is increased. The error induced by the linear methodology is evaluated, taking the nonlinear methodology as the reference. It is observed that the use of the linear methodology starts to induce substantial errors after an equivalence ratio of 1.1 for methane/air mixtures and before an equivalence ratio of 1 for iso-octane/air mixtures. One solution to increase the accuracy of the linear methodology for these critical cases consists in reducing the number of points used in the linear methodology by increasing the initial flame radius used. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data reduction considerations for spherical R-32(CH 2 F 2 )-air flame experiments

The burning velocities of mixtures of refrigerant R-32 (CH 2 F 2 ) with air over a range of equivalence ratios are studied via shadowgraph images of spherically expanding flames (SEFs) in a large, optically accessible spherical chamber at constant pressure. Numerical simulations of the 1-D, unsteady, spherical flames incorporating an optically thin radiation model and detailed kinetics accurately predict experimental results for a range of equivalence ratios. For these low burning velocity flames, the effects of stretch and radiation occur simultaneously and make extraction of the unstretched burning velocity from the experimental data difficult. Different data reduction approaches are shown to have large effects on the burning velocities inferred from the experiments and simulations. A new flame radius tracking approach for the experimental images is shown to provide improved agreement of the burned gas velocity variation with stretch predicted by the simulations and helps to compensate for mild flame distortion due to buoyancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soot Aerosol Properties in Laminar Soot-Emitting Microgravity Nonpremixed Flames

The 0-g flame soot measurements reported in previous studies are extended by adding new 0-g data for different fuel flow rates and burner diameters. The new flame conditions allow more conclusive comparisons regarding the effect of characteristic flow residence times on soot field structure, the influence of fuel preheat on fuel pyrolysis rates near the flame centerline, and the premature cessation of soot growth along the soot annulus in 0-g when the fuel is preheated. The paper also reports on the implementation of thermophoretic soot sampling in a specific 0-g flame featuring burner exit velocities typical of buoyant flames and presents quantitative data on the radial variation of soot microstructure at a fixed height above the burner mouth.

FLAME STRUCTURE↗

Simplified Structure Models for Premixed n-Alkane Cool Flames

The chemical kinetics of cool flames in mixtures of normal alkanes, oxygen, and nitrogen recently have been reduced to obtain simplified asymptotic flame-structure models that can be used to compare theoretical predictions with experimental measurements. A key step that affects flame structures strongly, namely the abstraction of a hydrogen atom from the alkyl radical by an oxygen molecule, had not been taken into account in those models. This deficiency has now been remedied for diffusion flames. The present contribution reports the corresponding remedy for premixed-flame analyses. In the new model, non-zero chemical reaction rates are restricted to narrow regions in the vicinity of the maximum temperature, whereas previously they extended throughout the preheat zone. Comparisons of the new predictions with experimental burning-velocity measurements seem favorable.

premixed cool flames↗

Effects of position and frequency of obstacles on turbulent premixed propagating flames

This paper studies the effects of the number and location of solid obstacles on the rate of propagation of turbulent premixed flames. A vented explosion chamber is constructed where controlled premixed flames are ignited from rest to propagate past grids or baffles plates as well as other solid obstacles strategically positioned in the chamber. Laser Induced Fluorescence (LIF) is used to image OH which is used as an indicator of the reaction zone while pressure transducers are used to obtain pressure-time traces. Single grids or baffle plates located at different distances from the ignition source are tested. Two as well as three baffle plates are also investigated in varying configurations. It is found that while the peak overpressure increases with increasing number of grids or baffle plates, a limit is reached where the pressure starts to decrease. The location of the obstacles is found to have a significant effect on the overpressure and the flame structure. Higher overpressures are obtained when the baffle plates and obstacles are stacked closer together hence not allowing turbulence to decay. LIF images for OH show that the reaction zones become more contorted with increasing number of baffle plates in the flame path. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of premixed flames in a narrow channel with a step-wise wall temperature

The effect of channel height, inflow velocity and wall temperature on the dynamics and stability of unity Lewis number premixed flames in channels with specified wall temperature is investigated with steady and transient numerical simulations using a two-dimensional thermo-diffusive model. The simplified model is capable of capturing many of the transitions and the combustion modes observed experimentally and in direct numerical simulations in micro- and meso-scale channels, and indicates that the thermal flame/wall interaction is the mechanism leading to the observed flame instabilities. Finally, an ad-hoc one-dimensional model based on the flame-sheet approximation is tested in its capacity to reproduce some of the flame dynamics of the two-dimensional thermo-diffusive model. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of spray-turbulence-flame interactions in a lean direct injection combustor

Large-eddy simulation (LES) of a liquid-fueled lean-direct injection (LDI) combustor is carried out by resolving the entire inlet flow path through the swirl vanes and the combustor. A localized dynamic subgrid closure is combined with a subgrid mixing and combustion model so that no adjustable parameters are required. The inflow spray is specified by a Kelvin-Helmholtz (or aerodynamic) breakup model and compared with LES without breakup, where the incoming spray is approximated using measured data just downstream of the injector. Overall, both time-averaged gas and droplet velocity predictions compare well with the measured data. The major impact of breakup is on fuel evaporation in the vicinity of the injector. Further downstream, a broad spectrum of drop sizes are recovered by the breakup simulation and produces spray quality, as in the no-breakup case. It is shown that the vortex breakdown bubble (VBB) is smaller with more intense reverse flow when there is heat release. The swirling shear layer plays a major role in spray dispersion and the VBB provides an efficient flame-holding mechanism to stabilize the flame. Unsteady features such as the efficient dispersion of the spray by the precessing vortex core (PVC) are well captured. Flame structure analysis using the Takeno flame index shows the presence of a diffusion flame in the central portion, whereas premixed burning mode is observed farther away. Instantaneous thermochemical states of fuel-air mixing and oxidation indicate significant departure from the gaseous diffusion limits, consistent with earlier observations. Additionally, particle-particle and particle-gas correlations are analyzed and discussed. (author)

42 ENGINEERING↗