Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Expedition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1953

Wind-Tunnel Investigation at Low Speed of the Yawing Stability Derivatives of a 1/9-Scale Powered Model of the Convair XFY-1 Vertically Rising Airplane, TED No. NACA DE 373

An experimental investigation has been conducted in the Langley stability tunnel at low speed to deter+nine the yawing stability derivatives of a 1/9-scale powered model of the Convair XFY-1 vertically rising airplane. Effects of thrust coefficient were investigated for the complete model and for certain components of the model. Effects of control deflections and of propeller blade angle were investigated for the complete model. Most of the tests were made through an angle-of-attack range from about -4deg to 29deg, and the thrust coefficient range was from 0 to 0.7. In order to expedite distribution of these data, no analysis of the data has been prepared for this.

Queijo, M. J.↗
NASA NTRS1953

Wind-Tunnel Investigation at Low Speed of the Rolling Stability Derivatives of a 1/9-Scale Powered Model of the Convair XFY-1 Vertically Rising Airplane, TED No. NACA DE 373

An experimental investigation has been conducted in the Langley stability tunnel at low speed to determine the rolling stability derivatives of a 1/9-scale powered model of the Convair XFY-1 vertically rising airplane. Effects of thrust coefficient were investigated for the complete model and for certain components of the model. Effects of control deflections and of propeller blade angle were investigated for the complete model. Most of the tests were made through an angle-of-attack range from about -4deg to 29deg, and the thrust coefficient range was from 0 to 0.7. In order to expedite distribution of these data, no analysis of the data has been prepared for this paper.

Queijo, M. J.↗
NASA NTRS2004

Oceanic Tidal Mixing As a Contributor to Milankovitch-scale Climate Change

We propose that changes in the magnitude of oceanic tidal mixing on long time scales is an important, but previously unrecognized, contributor to global climate change. it is well known that Earth's orbital and rotational state changes significantly on 10(exp 4)-10(exp 5) year time scales, and that this influences the spatial and temporal pattern of incident radiation. It is widely supposed that climatic variations on these same time scales are, in large part, a response of the ocean-atmosphere-cryosphere system to this radiative forcing. Our proposal is that variations in the luni-solar tidal potential, induced by these same orbital and rotational variations, influences oceanic mixing and thus modulates meridional heat transport, by amounts which are competitive with the radiative forcing. There are some obvious differences between tidal potential and insolation. First is that the Sun and Moon both contribute to tides, whereas the radiation is entirely of solar origin. Second is that the Earth is transparent to gravity but opaque to radiation. Clipping associated with this opacity makes the radiation pattern temporal spectrum rather more complex than the tidal spectrum. A third point is that solar radiation directly delivers energy to Earth's surface whereas tidal mixing will only expedite lateral transport of heat in association with oceanic thermohaline circulation. The diurnal average insolation pattern is best parameterized via a Fourier series in time of year and Legendre polynomials in sine of latitude. Our present focus will be on the annual average terms. The Legendre degree n=0 term describes the global average insolation, and is nearly constant. The degree n=l term describes differences between northern and southern hemispheres, and the annual mean is zero. The degree n=2 term is the main contributor to the equator to pole variations, and varies with obliquity and orbital eccentricity, with the obliquity variation dominating. The lowest order decomposition of the tidal potential recognizes 3 constituents: semi-diurnal, diurnal, and long period, with solar and lunar contributions to each. Our present focus will be on long term variations in the mean square amplitude of the semi-diurnal constituent, with averaging over all the short period variations. For the solar tide that includes the day and year. For the lunar tide it includes the day, month, year, and the apsidal (8.85 year) and nodal (18.6 year) periods. We present calculations of the variations in radiative and tidal forcing for the past 3 million years. The two signals are quite similar. Both vary by approximately 1% of their respective mean values, are dominated by obliquity variations, and exhibit only secondary influence from orbital eccentricity.

Munk, Walter↗
NASA NTRS1953

Wind-Tunnel Investigation at Low Speed of the Static Longitudinal and Lateral Stability Characteristics of a 1/9-Scale Powered Model of the Convair XFY-1 Vertically Rising Airplane

An experimental investigation has been made in the Langley stability tunnel at low speed to determine the static longitudinal and lateral stability characteristics of a l/9-scale powered model of the Convair XFY-1 vertically rising airplane. Effects of thrust coefficient were investigated for the complete model and for certain components of the model. Effects of control deflections and of propeller-blade angle were investigated briefly for the complete model. Most of the tests were made through an angle-of-attack range from about -4 deg. to 29 deg, and the thrust-coefficient range was from 0 t o 0.7. In order to expedite distribution of these data to interested persons, no analysis of the data has been prepared for this report,

Queijo, M. J.↗
NASA NTRS2005

Evaluation of shoulder integrity in space: first report of musculoskeletal US on the International Space Station

Investigative procedures were approved by Henry Ford Human Investigation Committee and NASA Johnson Space Center Committee for Protection of Human Subjects. Informed consent was obtained. Authors evaluated ability of nonphysician crewmember to obtain diagnostic-quality musculoskeletal ultrasonographic (US) data of the shoulder by following a just-in-time training algorithm and using real-time remote guidance aboard the International Space Station (ISS). ISS Expedition-9 crewmembers attended a 2.5-hour didactic and hands-on US training session 4 months before launch. Aboard the ISS, they completed a 1-hour computer-based Onboard Proficiency Enhancement program 7 days before examination. Crewmembers did not receive specific training in shoulder anatomy or shoulder US techniques. Evaluation of astronaut shoulder integrity was done by using a Human Research Facility US system. Crew used special positioning techniques for subject and operator to facilitate US in microgravity environment. Common anatomic reference points aided initial probe placement. Real-time US video of shoulder was transmitted to remote experienced sonologists in Telescience Center at Johnson Space Center. Probe manipulation and equipment adjustments were guided with verbal commands from remote sonologists to astronaut operators to complete rotator cuff evaluation. Comprehensive US of crewmember's shoulder included transverse and longitudinal images of biceps and supraspinatus tendons and articular cartilage surface. Total examination time required to guide astronaut operator to acquire necessary images was approximately 15 minutes. Multiple arm and probe positions were used to acquire dynamic video images that were of excellent quality to allow evaluation of shoulder integrity. Postsession download and analysis of high-fidelity US images collected onboard demonstrated additional anatomic detail that could be used to exclude subtle injury. Musculoskeletal US can be performed in space by minimally trained operators by using remote guidance. This technique can be used to evaluate shoulder integrity in symptomatic crewmembers after strenuous extravehicular activities or to monitor microgravity-associated changes in musculoskeletal anatomy. Just-in-time training, combined with remote experienced physician guidance, may provide a useful approach to complex medical tasks performed by nonexperienced personnel in a variety of remote settings, including current and future space programs. (c) RSNA, 2004.

Space Flight/education↗
NASA NTRS2004

Ancient scientific basis of the "great serpent" from historical evidence

Zoological data and a growing mythology contributed to ancient Western knowledge about large serpents. Yet little modern attention has been paid to the sources, transmission, and receipt in the early Middle Ages of the ancients' information concerning "dragons" and "sea serpents." Real animals--primarily pythons and whales--lie behind the ancient stories. Other animals, conflations of different animals, simple misunderstandings, and willful exaggerations are found to account for the fanciful embellishments, but primitive myths played no significant role in this process during classical times. The expedition of Alexander the Great into India (327-325 B.C.) and the Bagradas River incident in North Africa (256 B.C.) had enormous repercussions on the development of serpent lore. Credible evidence is found for the presence of ancient populations of pythons living along the North African coast west of Egypt and along the coast of the Arabian Sea between the Indus River and the Strait of Hormuz--places where they no longer exist today. The maximum sizes of ancient pythons may have been greater than those of today's specimens.

Emblems and Insignia/history↗
NASA NTRS2005

Interaction Challenges in Human-Robot Space Exploration

In January 2004, NASA established a new, long-term exploration program to fulfill the President's Vision for U.S. Space Exploration. The primary goal of this program is to establish a sustained human presence in space, beginning with robotic missions to the Moon in 2008, followed by extended human expeditions to the Moon as early as 2015. In addition, the program places significant emphasis on the development of joint human-robot systems. A key difference from previous exploration efforts is that future space exploration activities must be sustainable over the long-term. Experience with the space station has shown that cost pressures will keep astronaut teams small. Consequently, care must be taken to extend the effectiveness of these astronauts well beyond their individual human capacity. Thus, in order to reduce human workload, costs, and fatigue-driven error and risk, intelligent robots will have to be an integral part of mission design.

Fong, Terrence↗
NASA NTRS2005

A Web-based Collaborative Tool for Mars Analog Data Exploration

Solving today's complex research and modeling challenges are dependent on our ability to discover, access, integrate, and share information from multiple sources. The planetary sciences community is no exception'; over the last few years, the need for data mining and exploration tools that can expedite comparative studies between Martian and terrestrial analogs sites and aid the interpretation of Mars data sets has become evident. Data sharing maximizes scientific return from studies and data sets.

Necsoiu, M.↗
NASA NTRS2004

Expanding Remote Science Operations Capabilities Onboard the International Space Station

EXPRESS Racks have been supporting payload science operations onboard the International Space Station (ISS) since April of 2001. EXPRESS is an acronym that stands for "EXpedite the PRocessing of Experiments to Space Station." This name reflects NASA's focus to simplify the process of manifesting experiments and maximizing scientific research capabilities by providing a robust, remotely operated payload support platform. The EXPRESS Rack System was developed by NASA's Marshall Space Flight Center (MSFC) and built by The Boeing Company in Huntsville, Alabama. Eight EXPRESS racks were built and five are currently onboard the ISS supporting science operations. The design and development of the EXPRESS Rack System is a long story that has been documented in previous publications. This paper briefly describes the facilities used to develop and verify flight software, test operational capabilities. It then traces the advancements made in the operational capabilities of the EXPRESS Racks from the time they were launched on STS-100 through the present. The paper concludes with a description of potential enhancements that will make the EXPRESS racks one of the most advanced and capable remote science platforms ever developed.

Cruzen, Craig A.↗
NASA NTRS2005

Mineralogy and Petrology of New Antarctic Nakhlite MIL 03346

Among the approx.1300 meteorites returned from Antarctica by the 2003-2004 ANSMET expedition was a 715g nakhlite, MIL 03346, recovered from the Miller Range. Samples of this meteorite were distributed to investigators on December 16, 2004. We were allocated PTS MIL 03346,63,100. This abstract is our preliminary report on the mineralogy and petrology of this important new sample.

McKay, G.↗
NASA NTRS1996

Separator Materials Used in Secondary Alkaline Batteries Characterized and Evaluated

Nickel-cadmium (Ni/Cd) and nickel-hydrogen (Ni/H2) secondary alkaline batteries are vital to aerospace applications. Battery performance and cycle life are significantly affected by the type of separators used in those batteries. A team from NASA Lewis Research Center's Electrochemical Technology Branch developed standardized testing procedures to characterize and evaluate new and existing separator materials to improve performance and cycle life of secondary alkaline batteries. Battery separators must function as good electronic insulators and as efficient electrolyte reservoirs. At present, new types of organic and inorganic separator materials are being developed for Ni/Cd and Ni/H2 batteries. The separator material previously used in the NASA standard Ni/Cd was Pellon 2505, a 100-percent nylon-6 polymer that must be treated with zinc chloride (ZnCl2) to bond the fibers. Because of stricter Environmental Protection Agency regulation of ZnCl2 emissions, the battery community has been searching for new separators to replace Pellon 2505. As of today, two candidate separator materials have been identified; however, neither of the two materials have performed as well as Pellon 2505. The separator test procedures that were devised at Lewis are being implemented to expedite the search for new battery separators. The new test procedures, which are being carried out in the Separator Laboratory at Lewis, have been designed to guarantee accurate evaluations of the properties that are critical for sustaining proper battery operation. These properties include physical and chemical stability, chemical purity, gas permeability, electrolyte retention and distribution, uniformity, porosity, and area resistivity. A manual containing a detailed description of 12 separator test procedures has been drafted and will be used by the battery community to evaluate candidate separator materials for specific applications. These standardized procedures will allow for consistent, uniform, and reliable results that will ensure that separator materials have the desired properties for long life and good performance in secondary alkaline cells.

Source record↗
NASA NTRS2004

Glenn Heat Transfer Simulation and Solver Graphical User Interface: Development and Testing

In the Tui ine Branch of the Turbomachinery and Propulsion Systems Division, researching and developing efficient turbine aerothermodynamics technologies is the main objective. Creating effective turbines for jet engines is a process which, if based purely on physical experimental testing, would be extremely expensive. It is for this reason, and also for the reasons of speed and ease, that the Turbine Branch spends a large amount of effort working with simulations of turbines. Specifically, they focus their work on two main fields: Computational Field Dynamics (CFD), and Experimental data analysis. The experimental field involves comparing experimental results to simulated results, whereas the CFD field involves running these simulations. The simulations are applied to aerodynamics and heat transfer cases, for both steady and unsteady flow conditions. By and large this work is applied to the domain of flow and heat transfer in axial turbines. The main application used to run these heat flow simulations is GlennHT. This program, recently rewritten in FORTRAN 90, allows the user to input a job file which specifies all the necessary parameters needed to simulate flow through a user-defined grid. There are several other executables used as well, ranging in application from converting grid files to and from particular formats, to merging blocks in a connectivity file, to converting connectivity files to a GlennHT compatible format. All of these executables are run from the command line in a terminal; some of them have interactive prompts where the user must specify the files to be manipulated after the program starts, while others take all of their parameters from the command line. With this amount of variation comes a good deal of commands and formats to memorize, which can cause slower and less efficient work, as users may forget how to execute a certain program, or not remember the pathnames of the files they wish to use. Two years ago, steps were made to expedite this process with a graphical user interface (GUI) that combines the functionality of all the executables along with adding some new functionality, such as residuals graphing and boundary conditions creation. Upon my beginning here at Glenn, many parts of the GUI, which was developed in Java, were nonfunctional. There were also issues with cross-platforming, as systems in the branch were transitioning from Silicon Graphics (SGI) machines to Linux machines. My goals this summer are to finish the parts of the GUI that are not yet completed, fix parts that did not work correctly, expand the functionality to include other useful features, such as grid surface highlighting, and make the system compatible with both Linux and SGI. I will also be heavily testing the system and providing sufficient documentation on how to use the GUI, as no such documentation existed previously.

Kardamis, Joseph R.↗
NASA NTRS2005

TERRA/MOPITT Measurements of Tropospheric Carbon Monoxide Distributions in Support of INTEX

Interaction with the ongoing satellite measurements programs was an important goal of INTEX- A. The Terra/MOPITT instrument had been making global measurements of the tropospheric carbon monoxide (CO) distribution for 4 years, and was in a unique position to provide valuable support during the field campaign. Remote sensing of CO directly addressed the scientific questions motivating the IXTEX-A strategy and deployment, and measurement of this gas was rated as being mission critical. CO is an important trace gas in tropospheric chemistry due to its role in determining the atmospheric oxidizing capacity, as an ozone precursor, and as an indicator and tracer of both natural and anthropogenic pollution arising from incomplete combustion. The satellite perspective provided the more general temporal and spatial context to the aircraft and ground-based measurements during the subsequent scientific analysis. We proposed to build on the experience of supplying MOPITT data to previous field campaigns, such as TRACE-P. We provided expedited MOPITT data processing in near real-time, along with basic analysis of the measurements to indicate, where possible, the origin of the CO plumes that impacted the regions of flight operations and other in situ measurement activities. To ensure maximum exploitation of the satellite information, we will also had a scientist in the field to present and interpret the MOPITT data for the INTEX team, and to help ensure its utility in flight planning.

Edwards, D. P.↗
NASA NTRS2004

A status report on the characterization of the microgravity environment of the International Space Station

A primary objective of the International Space Station is to provide a long-term quiescent environment for the conduct of scientific research for a variety of microgravity science disciplines. Since continuous human presence on the space station began in November 2000 through the end of Increment-6, over 1260 hours of crew time have been allocated to research. However, far more research time has been accumulated by experiments controlled on the ground. By the end of the time period covered by this paper (end of Increment-6), the total experiment hours performed on the station are well over 100,000 hours (Expedition 6 Press Kit: Station Begins Third Year of Human Occupation, Boeing/USA/NASA, October 25, 2002). This paper presents the results of the on-going effort by the Principal Investigator Microgravity Services project, at NASA Glenn Research Center, in Cleveland, Ohio, to characterize the microgravity environment of the International Space Station in order to keep the microgravity scientific community apprised of the reduced gravity environment provided by the station for the performance of space experiments. This paper focuses on the station microgravity environment for Increments 5 and 6. During that period over 580 Gbytes of acceleration data were collected, out of which over 34,790 hours were analyzed. The results presented in this paper are divided into two sections: quasi-steady and vibratory. For the quasi-steady analysis, over 7794 hours of acceleration data were analyzed, while over 27,000 hours were analyzed for the vibratory analysis. The results of the data analysis are presented in this paper in the form of a grand summary for the period under consideration. For the quasi-steady acceleration response, results are presented in the form of a 95% confidence interval for the station during "normal microgravity mode operations" for the following three attitudes: local vertical local horizontal, X-axis perpendicular to the orbit plane and the Russian torque equilibrium attitude. The same analysis was performed for the station during "non-microgravity mode operations" to assess the station quasi-steady acceleration environment over a long period of time. The same type of analysis was performed for the vibratory, but a 95th percentile benchmark was used, which shows the overall acceleration magnitude during Increments 5 and 6. The results, for both quasi-steady and vibratory acceleration response, show that the station is not yet meeting the microgravity requirements during the microgravity mode operations. However, it should be stressed that the requirements apply only at assembly complete, whereas the results presented below apply up to the station's configuration at the end of Increment-6. c2004 Elsevier Ltd. All rights reserved.

ISS Project↗
NASA NTRS2005

STS-114 Flight Day 4 Highlights

Video coverage of Day 4 continues the Return to Flight mission of STS-114. The crew of Space Shuttle Discovery (Commander Eileen Collins, Pilot James Kelly, Mission Specialists Soichi Noguchi, Stephen Robinson, Andrew Thomas, Wendy Lawrence, and Charles Camarda) and the Expedition 11 crew (Commander Sergei Krikalev and NASA ISS Science Officer and Flight Engineer John Phillips) of the International Space Station (ISS) cooperated on several activities. These were the installation of the Raffaello Multipurpose Logistics Module onto the Common Bearthing Mechanism of the Unity module of the ISS by the Space Station Remote Manipulator System, an interview of Collins and Thomas, primarily focusing on foam shedding and shuttle safety, and use of the Orbiter Boom Sensor System by the Shuttle Remote Manipulator System to follow up on ground-based inspection of the thermal protection beneath Discovery.

Source record↗
NASA NTRS2005

STS-114 Flight Day 3 Highlights

Video coverage of Day 3 includes highlights of STS-114 during the approach and docking of Discovery with the International Space Station (ISS). The Return to Flight continues with space shuttle crew members (Commander Eileen Collins, Pilot James Kelly, Mission Specialists Soichi Noguchi, Stephen Robinson, Andrew Thomas, Wendy Lawrence, and Charles Camarda) seen in onboard activities on the fore and aft portions of the flight deck during the orbiter's approach. Camarda sends a greeting to his family, and Collins maneuvers Discovery as the ISS appears steadily closer in sequential still video from the centerline camera of the Orbiter Docking System. The approach includes video of Discovery from the ISS during the orbiter's Rendezvous Pitch Maneuver, giving the ISS a clear view of the thermal protection systems underneath the orbiter. Discovery docks with the Destiny Laboratory of the ISS, and the shuttle crew greets the Expedition 11 crew (Commander Sergei Krikalev and NASA ISS Science Officer and Flight Engineer John Phillips) of the ISS onboard the station. Finally, the Space Station Remote Manipulator System hands the Orbiter Boom Sensor System to its counterpart, the Shuttle Remote Manipulator System.

Source record↗
NASA NTRS2005

STS-114 Flight Day 6 Highlights

Day 6 is a relatively quiet day for the STS-114 crew. The main responsibility for crew members of Space Shuttle Discovery (Commander Eileen Collins, Pilot James Kelly, Mission Specialists Soichi Noguchi, Stephen Robinson, Andrew Thomas, Wendy Lawrence, and Charles Camarda) and the Expedition 11 crew of the International Space Station (ISS) (Commander Sergei Krikalev and NASA ISS Science Officer and Flight Engineer John Phillips) is to unload supplies from the shuttle payload bay and from the Raffaello Multipurpose Logistics Module onto the ISS. Several of the astronauts answer interview questions from the news media, with an emphasis on the significance of their mission for the Return to Flight, shuttle damage and repair, and the future of the shuttle program. Thomas announces the winners of an essay contest for Australian students about the importance of science and mathematics education. The video includes the installation of a stowage rack for the Human Research Facility onboard the ISS, a brief description of the ISS modules, and an inverted view of the Nile Delta.

Source record↗
NASA NTRS2005

STS-114 Flight Day 8 Highlights

The major activities of Day 8 for the STS-114 crew of the Space Shuttle Discovery (Commander Eileen Collins, Pilot James Kelly, Mission Specialists Soichi Noguchi, Stephen Robinson, Andrew Thomas, Wendy Lawrence, and Charles Camarda) and the Expedition 11 crew of the International Space Station (ISS) (Commander Sergei Krikalev and NASA ISS Science Officer and Flight Engineer John Phillips) are a press conference and a conversation with President Bush. The two crews are interviewed by American, Japanese, and Russian media. Discovery crew members on the shuttle's mid-deck review paperwork regarding the impending extravehicular activity (EVA) to remove gap fillers from underneath the orbiter, and the Space Station Remote Manipulator System grapples the External Stowage Platform-2 in the Shuttle's payload bay. Finally, Mission control grants the shuttle crew some time off.

Source record↗