SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Technical abstracts for about 90 significant documents relating to hydrogen embrittlement of structural metals and alloys are reviewed. Particular note was taken of documents regarding hydrogen effects in rocket propulsion, aircraft propulsion and hydrogen energy systems, including storage and transfer systems.
Dynamic modeling is being developed to provide a tool for systematic analysis of performance characteristics in energy systems where time-dependent behavior is important. A dynamic model program designed to aid in the understanding of solar collector behavior over the full range of operating conditions was constructed and tested in the evaluation of a conceptual collector design.
Simple inexpensive temperature-to-frequency converter utilizes readily available and inexpensive components to monitor temperature at eight or more locations. Circuit has potential applicability in monitoring and controlling solar energy systems, as well as other data collection and temperature control situations.
With the higher costs of electric power and the widespread interest to use solar energy to reduce the national dependence on fossil fuels, heat pumps are examined to determine their suitability for use with solar energy systems.
Present requirements for realistic solar energy system evaluations necessitate a comprehensive body of solar-radition data. The data should include both diffuse and direct solar radiation as well as their total on an hourly (or shorter) basis. In general, however, only the total solar radiation values were recorded. This report presents a correlation that relates the diffuse component of an hourly total solar radiation value to the total radiation ratio of the maximum value attainable. The data used were taken at the Blue Hill Observatory in Milton, Massachusetts, for the period 1952. The relation - in the form of the data plots - can be used in situations in which only the hourly total radiation data are available but the diffuse component is desired.
Stages in the development of lift vehicles and related facilities for near-earth space transportation, starting with the Space Shuttle, are reviewed. Data and expected missions for the Lunar Lander, Heavy Lift Vehicle, Orbital Transport Vehicle, Lunar Transport Vehicle, Shuttle plus Intermediate Upper Stage or Shuttle plus FCT are tabulated. Objectives and summary data are tabulated for some programs (low earth orbit space stations, geosynchronous operations, lunar surface sorties, planetary exploration, nuclear waste disposal, satellite energy systems).
The Chemical Energy Storage Program is described with emphasis on hydrogen storage. Storage techniques considered include pressurized hydrogen gas storage, cryogenic liquid hydrogen storage, storage in hydride compounds, and aromatic-alicyclic hydrogen storage. Some uses of energy storage are suggested. Information on hydrogen production and hydrogen use is also presented. Applications of hydrogen energy systems include storage of hydrogen for utilities load leveling, industrial marketing of hydrogen both as a chemical and as a fuel, natural gas supplementation, vehicular applications, and direct substitution for natural gas.
A study of atomic absorption spectroscopy as a possible nonobtrusive corrosion indicator for solar-energy systems is described. Procedures were tested for determining low levels of metallic concentration in aqueous glycol formulations. Other methods for determining corrosion are suggested.
Papers are presented on the heat transfer and fluid mechanics in energy systems including diesel combustion analysis using rapid sampling and the numerical simulation of thermal response of architectural structures. Experiments associated with hypersonic boundary layers, the prediction of nozzle-wall pressure distribution, and the effects of nozzle geometry on an axisymmetric thrust augmentor are outlined. Predictions are made of film thickness on a roll-metering device and the thermal characteristics of multiple-surface submerged condenser modules are described. Numerical studies are made of the interaction between natural and forced convection in a complex geometry and of pressure drop and holdup in two-phase stratified flow. A numerical solution is given for viscous flows at high Reynolds numbers and for compressible boundary layer flows near separation or reattachment. The structure and transport properties in turbulent shear flows are reviewed along with the spectra of Reynolds stresses in a developing pipe flow.
Findings of study of potential use for solar energy utilization by California dairy industry, prove that applicable solar energy system furnish much of heat needed for milk processing with large savings in expenditures for oil and gas and ensurance of adequate readily available sources of process heat.
Redundant-motor drive system, utilizing two electric motors, generates angular displacement to rotate mechanical or optical components in limited arc. Either motor can drive system while other remains stationary. Since stationary motor is not back-driven, system energy requirement is effectively reduced.
The meeting was sponsored by the Department of Energy, Division of Electric Energy Systems. Its purpose was to bring together some members of the electric utility community so that they might reach a common understanding on: (1) key issues and uncertainties to be resolved, (2) the existing state of the art, and (3) specific requirements for further RD&D in the area of DAC. The statements and recommendations formulated by the group on various topics are presented.
A variety of techniques may be used for photovoltaic energy systems. Concentrated or not concentrated sunlight may be employed, and a number of materials can be used, including silicon, gallium arsenide, cadmium sulfide, and cadmium telluride. Most of the experience, however, has been obtained with silicon cells employed without sunlight concentration. An industrial base exists at present for producing solar cells at a price in the range from $15 to $30 per peak watt. A major federal program has the objective to reduce the price of power provided by silicon solar systems to approximately $1 per peak watt in the early 1980's and $0.50 per watt by 1986. The approaches considered for achieving this objective are discussed.
An actinometer has been developed to measure outdoor irradiance in the range 295-400 nm. Actinometric measurements of radiation are based on determination of photochemical reaction rates for reactions of known quantum efficiency. Actinometers have the advantage of providing irradiance data over surfaces of difficult accessibility; in addition, actinometrically determined irradiance data are wavelength weighted and therefore provide a useful means of assessing the degradation rates of polymers employed in solar energy systems.
A necessary precursor to construction of well-designed, efficient, and economically viable solar energy systems is the engineering analysis not only of the systems themselves but also of the solar radiation that will drive them. This paper presents the first steps in such an analysis to support the design of solar thermal power systems. A rationale for development of an integrated approach to this analysis is outlined, and elements of the approach are described. A dynamic computer simulation of a conceptual system was employed in an initial sensitivity analysis to explore how performance estimates might be affected by the precision and amount of detail in solar radiation data used as model input. A measurement program, including instrumentation, used to characterize precisely and in detail the solar resource at one location is described as is a probabilistic model derived from it, for predicting insolation as a function of time.
Some basic technical approaches to producing hydrogen from solar energy are surveyed. Solar energy forms are divided into: (1) direct solar radiation and (2) indirect forms such as wind and ocean thermal gradient. Technical approaches are separated into: (1) direct hydrogen production from the action of sunlight on some substrate, (2) hydrogen production from sunlight via an intermediate form of energy such as heat and electricity, and (3) hydrogen production from indirect solar energy via an intermediate energy form. It is concluded that while hydrogen from solar energy will be expensive by present standards, the depletion of fossil fuels will cause solar hydrogen to emerge as one of the few alternatives to a nuclear-electric or nuclear-electric-hydrogen energy system.
For best performance, energy-absorbing surface of solar collector should be characterized by high ratio of solar absorptance to thermal emitance. Report on optical characteristics of several chemical treatments and electrodeposited coatings for metal solar-absorbing surfaces should interest designers and users of solar-energy systems. Moisture resistance of some coatings is also reported.
Rigorous environmental and performance tests qualify solar collector for use in residential solar-energy systems. Testing over 7 month period examined pressurized effects, wind and snow loading, hail damage, solar and thermal degradation, effects of pollutants, efficiency, and outgassing. Test procedures and results are summarized in tables, graphs, and text.