SEARCH · Engineering Papers

Results for “EMPLOYMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Experimental stress analysis of a thin-walled pressurized torus loaded by contact with a plane

It is pointed out that pneumatic tires have a large effect on the overall landing characteristics of an aircraft. The dynamic response upon landing and steering are crucial to the safety of the vehicle and the occupants. The present investigation has the objective to compare experimentally determined strains on an inner tube in contact with a flat plate with numerical values obtained on the basis of a finite element prediction, taking into account an employment of the Structural Analysis of General Shells (STAGS). The obtained results suggest that the clamped boundary condition utilized in the STAGS calculation is not exactly simulated by the employed test setup.

Hill, D. E.↗

NASA NTRS1982

Mapping of auroral X-rays from rocket overflights

Remote sensing of energetic auroral X-rays from above the emission region can provide both local and global information regarding X ray and energetic electron deposition within the middle atmosphere. However, contamination of X ray detectors by local corpuscular radiation can severely affect the scope and accuracy of the detector measurements. It is, therefore, necessary to employ techniques designed to observe X rays while rejecting the far more intense corpuscular radiation component. A suitable approach for the mapping of auroral X rays involves the employment of rockets for flights above the emission region. A description is presented of the results obtained from two rocket flights launched from Poker Flat Research Range, Alaska, during aurorally active periods in March 1978. The data were measured with the aid of scanning detectors protected from particles by broom magnet techniques.

Goldberg, R. A.↗

NASA NTRS1982

Conversion of blackbody radiation into laser energy

By employing detailed kinetic models, three concepts which utilize a blackbody cavity for the conversion of solar energy into laser energy using a CO2 lasant are analyzed and compared. In the first, the blackbody radiation is used to excite flowing CO2 directly. The second and third employ a mixing laser concept with CO and N2 being the donor gases. The CO is optically pumped while thermal heating excites the N2. Blackbody temperatures ranging from 1500 deg K - 2500 deg K are considered. Based on calculated laser power output per unit flow rate of CO2, it appears that the N2-CO2 mixing laser is the most attractive system.

Mcinville, R. M.↗

NASA NTRS1981

Thematic mapper - An overview of spectral band registration

The Thematic Mapper (TM) is a high-resolution radiometer designed for earth resources classification and mapping. The TM employs multispectral scanning in a near polar orbit to sweep a 185-km swath. Data are obtained through a combination of spacecraft motion and the sweeping action of the scan mirror. These data are transmitted either directly to ground stations around the world or through a relay to the central data processing facility at White Sands, NM. Seven spectral passbands are employed, and applications include coastal water mapping, soil vegetation differentiation, biomass surveys, water body delineation, vegetation moisture measurement, plant heat stress management, and hydrothermal mapping. Attention is given to the scan mirror assembly, scan nonlinearities, the characterization and compensation of scan profiles, experimental performance, and a procedure for midscan correction.

Freudenstein, W. H.↗

NASA NTRS1982

An image drift compensation system for a solar pointed space telescope

Two sounding rocket test flights have been conducted in the development of an image drift compensation system designed for a solar-pointed space telescope. The system, whose scientific results are presented, employs limb-sensing photodiodes at the telescope focal plane and provides drift compensation to better than + or - 0.1 arcsec. A variation of this device will be employed by the Space Shuttle/Spacelab 2 flight of the High Resolution Telescope and Spectrograph (HRTS) Instrument. The data gathered by the rocket flights of the drift compensation system have revealed high velocity ejecta traveling through the transition zone and corona at velocities up to 400 km/sec. The HRTS configuration and its constitutive instruments' optical parameters are described.

Bartoe, J.-D. F.↗

NASA NTRS1982

Conservative supra-characteristics method for splitting the hyperbolic systems of gasdynamics with computed boundaries for real and perfect gases

Implicit methods developed by Beam and Warming (1978 and Briley and McDonald (1977) make it possible to overcome the hyperbolic stiffness of the conservative compressible Navier-Stokes equations in the fine wall region computational mesh for high Reynold's number flow. Certain difficulties related to the use of these methods could be overcome by employing an approach reported by Roe (1981). In the present investigation Roe's conceptual framework has been adopted for constructing globally conservative finite difference methods. A globally conservative upwind finite difference method (CSCM) consisting of both implicit interior point and boundary point equations is constructed from a new characteristics based flux difference splitting. It is found that the employed upwind eigenvector split scheme which combines fully coupled implicit interior point and boundary point approximations has the desired properties of robust stability and accuracy.

Lombard, C. K.↗

NASA NTRS1982

Plasma flow measurements in a simulated low earth orbit plasma

The employment of large, higher power solar arrays for space operation has been considered, taking into account a utilization of high operating voltages. In connection with the consideration of such arrays, attention must be given to the fact that the ambient environment of space contains a tenuous low energy plasma which can interact with the high voltage array causing power 'leakage' and arcing. An investigation has been conducted with the aim to simulate the behavior of such an array in low-earth-orbit (LEO). During the experiments, local concentrations of the 'leakage' current were observed when the panel was at a high voltage. These concentrations could overload or damage a small area of cells in a large string. It was hypothesized that this effect was produced by electrostatic focusing of the particles by the sheath fields. To verify this experimentally, an end-effect Langmuir probe was employed. The obtained results are discussed.

Gabriel, S. B.↗

NASA NTRS1982

Measurement and visualization of skin friction on the leeside of delta wings in supersonic flow

The reported investigation was conducted with the aid of the NASA Ames High Reynolds Number Wind Tunnel. The flow conditions considered involved free stream Mach numbers of 2 and 3, and a Reynolds number of approximately 10,000,000 p. m. The employed model was a delta wing with an angle of 70 deg. A method reported by Tanner (1977) was used for the measurement of the skin friction. This method involves the use of a laser interferometer to determine the change in the thickness of an oil film. The procedure can also be employed for a visualization of skin friction in the form of interferograms. The investigation shows that skin friction measurements can provide a significant contribution to a physical understanding of the flow processes at the delta wing.

Szodruch, J.↗

NASA NTRS1982

A simple test for the interlaminar fracture toughness of composites

A simple test method for the measurement of delamination resistance is assessed through its application to 11-ply graphite-epoxy laminates whose matrices employ the F185 and 205 resins. The F185 resin has the same base epoxy as the 205, to which liquid and solid elastomers have been added. The critical value of the mixed mode energy release rate, calculated from a closed form equation employing nominal strain measurements from the onset of edge delamination, show that addition of the elastomers to the base epoxy increases interlaminar fracture toughness. Comparison of these results with those of width-tapered double cantilever beam (WTDCB) test data for the two materials shows a similar strain energy release rate, establishing the accuracy of the novel method. Both tests are found to be needed, however, for the quantitative characterization of interlaminar fracture toughness.

Obrien, T. K.↗

NASA NTRS1981

The application of simulation modeling to the cost and performance ranking of solar thermal power plants

A computer simulation code was employed to evaluate several generic types of solar power systems (up to 10 MWe). Details of the simulation methodology, and the solar plant concepts are given along with cost and performance results. The Solar Energy Simulation computer code (SESII) was used, which optimizes the size of the collector field and energy storage subsystem for given engine-generator and energy-transport characteristics. Nine plant types were examined which employed combinations of different technology options, such as: distributed or central receivers with one- or two-axis tracking or no tracking; point- or line-focusing concentrator; central or distributed power conversion; Rankin, Brayton, or Stirling thermodynamic cycles; and thermal or electrical storage. Optimal cost curves were plotted as a function of levelized busbar energy cost and annualized plant capacity. Point-focusing distributed receiver systems were found to be most efficient (17-26 percent).

Rosenberg, L. S.↗

NASA NTRS1982

Analysis and design of a standardized control module for switching regulators

Three basic switching regulators: buck, boost, and buck/boost, employing a multiloop standardized control module (SCM) were characterized by a common small signal block diagram. Employing the unified model, regulator performances such as stability, audiosusceptibility, output impedance, and step load transient are analyzed and key performance indexes are expressed in simple analytical forms. More importantly, the performance characteristics of all three regulators are shown to enjoy common properties due to the unique SCM control scheme which nullifies the positive zero and provides adaptive compensation to the moving poles of the boost and buck/boost converters. This allows a simple unified design procedure to be devised for selecting the key SCM control parameters for an arbitrarily given power stage configuration and parameter values, such that all regulator performance specifications can be met and optimized concurrently in a single design attempt.

Lee, F. C.↗

NASA NTRS1982

Large-aperture interferometer using local reference beam

A large-aperture interferometer was devised by adding a local-reference-beam-generating optical system to a schlieren system. Two versions of the interferometer are demonstrated, one employing 12.7 cm (5 in.) diameter schlieren optics, the other employing 30.48 cm (12 in.) diameter parabolic mirrors in an off-axis system. In the latter configuration a cylindrical lens is introduced near the light source to correct for astigmatism. A zone plate is a satisfactory decollimating element in the reference-beam arm of the interferometer. Attempts to increase the flux and uniformity of irradiance in the reference beam by using a diffuser are discussed.

Howes, W. L.↗

NASA NTRS1982

The Reed-Solomon encoders: Conventional versus Berlekamp's architecture

Concatenated coding was adopted for interplanetary space missions. Concatenated coding was employed with a convolutional inner code and a Reed-Solomon (RS) outer code for spacecraft telemetry. Conventional RS encoders are compared with those that incorporate two architectural features which approximately halve the number of multiplications of a set of fixed arguments by any RS codeword symbol. The fixed arguments and the RS symbols are taken from a nonbinary finite field. Each set of multiplications is bit-serially performed and completed during one (bit-serial) symbol shift. All firmware employed by conventional RS encoders is eliminated.

Perlman, M.↗

NASA NTRS1983

High Accuracy Fuel Flowmeter, Phase 1

Technology related to aircraft fuel mass - flowmeters was reviewed to determine what flowmeter types could provide 0.25%-of-point accuracy over a 50 to one range in flowrates. Three types were selected and were further analyzed to determine what problem areas prevented them from meeting the high accuracy requirement, and what the further development needs were for each. A dual-turbine volumetric flowmeter with densi-viscometer and microprocessor compensation was selected for its relative simplicity and fast response time. An angular momentum type with a motor-driven, spring-restrained turbine and viscosity shroud was selected for its direct mass-flow output. This concept also employed a turbine for fast response and a microcomputer for accurate viscosity compensation. The third concept employed a vortex precession volumetric flowmeter and was selected for its unobtrusive design. Like the turbine flowmeter, it uses a densi-viscometer and microprocessor for density correction and accurate viscosity compensation.

Mayer, C.↗

NASA NTRS1981

Detection of rainfall rates utilizing spaceborne microwave radiometers

To demonstrate the success of utilizing passive microwave sensors in monitoring synoptic scale rainfall, two studies are described in which electrically scanning microwave radiometers (ESMR-5 and 6) on board Nimbus 5 and 6 were employed using a Langrangian frame of reference. The first study suggests a method of utilizing ESMR-5 measurements to quantize rainfall over water within tropical and extratropical storms and to use these measurements to monitor and possibly predict storm intensity. The second study suggests a method of monitoring the coverage and movement of synoptic rain over land by employing ESMR-6.

Burke, H. H. K.↗

NASA NTRS1983

Magnetic heat pumping

The method employs ferromagnetic or ferromagnetic elements, preferably of rare-earth based material, for example gadolinium, and preferably employs a regenerator. The steps comprise controlling the temperature and applied magnetic field of the element to cause the state of the element as represented on a temperature-magnetic entropy diagram repeatedly to traverse a loop. The loop may have a first portion of concurrent substantially isothermal or constant temperature and increasing applied magnetic field, a second portion of lowering temperature and constant applied magnetic field, a third portion of isothermal and decreasing applied magnetic field, and a fourth portion of increasing temperature and constant applied magnetic field. Other loops may be four sided, with, for example, two isotherms and two adiabats (constant entropy portions.

Brown, G. V.↗

NASA NTRS1981

The promise of remote sensing in the atmospheric sciences

The applications and advances in remote sensing technology for weather prediction, mesoscale meteorology, severe storms, and climate studies are discussed. Doppler radar permits tracking of the three-dimensional field of motion within storms, thereby increasing the accuracy of convective storm modeling. Single Doppler units are also employed for detecting mesoscale storm vortices and tornado vortex signatures with lead times of 30 min. Clear air radar in pulsed and high resolution FM-CW forms reveals boundary layer convection, Kelvin-Helmoltz waves, shear layer turbulence, and wave motions. Lidar is successfully employed for stratospheric aerosol measurements, while Doppler lidar provides data on winds from the ground and can be based in space. Sodar is useful for determining the structure of the PBL. Details and techniques of satellite-based remote sensing are presented, and results from the GWE and FGGE experiments are discussed.

Atlas, D.↗

NASA NTRS1983

A multigrid method for the Euler equations

A multigrid algorithm has been developed for the numerical solution of the steady two-dimensional Euler equations. Flux vector splitting and one-sided differencing are employed to define the spatial discretization. Newton's method is used to solve the nonlinear equations, and a multigrid solver is used on each linear problem. The relaxation scheme for the linear problems is symmetric Gauss-Seidel. Standard restriction and interpolation operators are employed. Local mode analysis is used to predict the convergence rate of the multigrid process on the linear problems. Computed results for transonic flows over airfoils are presented.

Jespersen, D. C.↗