Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drying”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Friction and wear behavior of nitrogen-doped ZnO thin films deposited via MOCVD under dry contact

Most researches on doped ZnO thin films are tilted toward their applications in optoelectronics and semiconductor devices. Research on their tribological properties is still unfolding. In this work, nitrogen-doped ZnO thin films were deposited on 304 L stainless steel substrate from a combination of zinc acetate and ammonium acetate precursor by MOCVD technique. Compositional and structural studies of the films were done using Rutherford Backscattering Spectroscopy (RBS) and X-ray Diffraction (XRD). The frictional behavior of the thin film coatings was evaluated using a ball-on-flat configuration in reciprocating sliding under dry contact condition. After friction test, the flat and ball counter-face surfaces were examined to assess the wear dimension and failure mechanism. In conclusion, both friction behavior and wear (in the ball counter-face) were observed to be dependent on the crystallinity and thickness of the thin film coatings.

36 MATERIALS SCIENCE↗

In-situ investigation of the vibrational properties of H 2 O CO 2 -bearing and dry K-rich basaltic glasses at high pressure by mid infrared spectroscopy

Here, the vibrational properties of CO 2 –H 2 O-bearing and dry synthetic K-rich basaltic glasses were investigated at room temperature and pressures between 0.0001–5.5 GPa using the diamond anvil cell combined with in situ reflectance and transmittance Fourier Transform infrared micro-spectroscopy. The absorption coefficient a(v) calculated from the Kramers-Kronig relation shows that glasses are dominated by the Q 2 aluminosilicate unit followed by Q 1 , Q 3 . The variation in Q n concentration upon compression suggests that glasses undergo polymerization from ambient pressure to 2 GPa followed by less marked structural changes up to 4 GPa, above which the structure is further polymerized. Once decompressed, glasses retained a polymerized structure. Our results show that 1.03 wt% CO 2 -1.42 wt% H 2 O in a glass with 3.10 wt% K 2 O and 46.77 wt% SiO 2 prevent the formation of fully polymerized connections when cold-compressed. Our results can be used to explain the effect of volatiles and alkali on the rheology of natural basaltic magmas.

36 MATERIALS SCIENCE↗

Dry in-pile fracture test (DRIFT) for separate-effects validation of ceramic fuel fracture models

Fracture is an important component of nuclear fuel behavior, and significant efforts have been invested into developing fuel performance models that are capable of accurately representing fracture. Usable data on the process of fracture propagation in nuclear fuel under realistic service conditions are very limited. To address this need, a series of separate-effects experiments were developed and performed at Idaho National Laboratory's Transient Reactor Test (TREAT) facility. These experiments employ a heat sink to radially remove heat from the fuel in a manner that approximates the effect of coolant in an operating light-water reactor (LWR). The test holder for these experiments is known as the Dry In-pile Fracture Test (DRIFT). A series of experiments employing DRIFT and TREAT were performed to provide data on the extent and nature of fracture in fresh fuel at various points during a ramp to full power. Novel aspects of these experiments include the way they employ a heat sink to replicate steady-state LWR conditions, as well as the use of fiber optic sensors for in-reactor thermal instrumentation. Details on the development of this experiment, experimental conditions, and resulting data (including in situ thermal measurements and post-irradiation imaging of fracture) are provided in this work. LWR-equivalent powers ranging from 10 to 25 kW/m were tested using this apparatus. Cracking was visible at all power levels, with increasing cracking extent as the power level increased, although there was little difference in the cracking between the two highest-power tests, which had LWR-equivalent powers of 20 and 25 kW/m.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Operando NMR and XRD study of chemically synthesized LiCx oxidation in a dry room environment

We test the stability of pre-lithiated graphite anodes for Li-ion batteries in a dry room battery processing room. The reaction between LiCx and laboratory air was followed using operando NMR and x-ray diffraction as these methods are sensitive to change in Li stoichiometry in graphite. There is minimal reactivity between LiC 6 and N 2 , CO 2 or O 2 ; however, LiC 6 reacts with moisture to form lithium (hydr)oxide. The reaction rate follows zero-order kinetics with respects to intercalated lithium suggesting that lithium transport through the graphite is fast. The reaction mechanism occurs by sequential formation of higher stages LiC 12 , then LiC 18 , and then LiC 24 as the hydrolysis proceeds to the formation of Li x OH y and graphite end products. Slowing down the formation rate of the Li x OH y passivation layer stabilizes of the higher stages.

25 ENERGY STORAGE↗

Effect of vanadium carbide on dry sliding wear behavior of powder metallurgy AISI M2 high speed steel processed by concentrated solar energy

Mixtures of AISI M2 high speed steel and vanadium carbide (3, 6 or 10 wt.%) were prepared by powder metallurgy and sintered by concentrated solar energy (CSE). Two different powerful solar furnaces were employed to sinter the parts and the results were compared with those obtained by conventional powder metallurgy using a tubular electric furnace. CSE allowed significant reduction of processing times and high heating rates. The wear resistance of compacts was studied by using rotating pin-on-disk and linearly reciprocating ball-on-flat methods. Wear mechanisms were investigated by means of scanning electron microscopy (SEM) observations and chemical inspections of the microstructures of the samples. Better wear properties than those obtained by conventional powder metallurgy were achieved. The refinement of the microstructure and the formation of carbonitrides were the reasons for this. - Highlights: •Powder metallurgy of mixtures of M2 high speed steel and VC are studied. •Some sintering is done by concentrated solar energy. •Rotating pin-on-disk and linearly reciprocating ball-on-flat methods are used. •The tribological properties and wear mechanisms, under dry sliding, are studied.

36 MATERIALS SCIENCE↗

Inactivation of multiple human pathogens by Fathhome's dry sanitizer device: Rapid and eco-friendly ozone-based disinfection

SARS-CoV-2 spread rapidly, causing millions of deaths across the globe. As a result, demand for medical supplies and personal protective equipment (PPE) surged and supplies dwindled. Separate entirely, hospital-acquired infections have become commonplace and challenging to treat. To explore the potential of novel sterilization techniques, this study evaluated the disinfection efficacy of Fathhome's ozone-based, dry-sanitizing device by dose and time response. Inactivation of human pathogens was tested on non-porous (plastic) surfaces. 95.42-100% inactivation was observed across all types of vegetative microorganisms and 27.36% inactivation of bacterial endospores tested, with no residual ozone detectable after completion. These results strongly support the hypothesis that Fathhome's commercial implementation of gas-based disinfection is suitable for rapid decontamination of a wide variety of pathogens on PPE and other industrially relevant materials.

59 BASIC BIOLOGICAL SCIENCES↗

Seismic response of vertical dry storage casks under three-dimensional earthquake motions

Ensuring the long-term seismic safety of dry storage casks (DSCs) is becoming increasingly critical as these systems evolve from temporary to de facto permanent repositories for spent nuclear fuels. Traditional seismic soil–structure interaction (SSI) assessment methods use one-dimensional deconvolution or simplified boundary conditions to model incident waves. Although computationally appealing, simplifying assumptions may alter the seismic risk by neglecting the full complexity of three-dimensional (3D) wave propagation effects. To address this challenge, this paper introduces a novel high-fidelity computational framework that leverages the Domain Reduction Method (DRM) with perfectly matched layers (PML) to accurately transfer complex, 3D seismic wavefields from regional-scale fault-rupture simulations into local-scale finite element models of DSCs. Using broadband, physics-based ground motions from a generic M w 7.0 strike-slip event, both single-cask and multi-cask configurations were investigated under near- and far-field conditions. Emphasis is placed on capturing complex SSI, spatial variability in the ground motion, and nonlinear phenomena such as cask rocking and sliding. Numerical results demonstrate that near-field conditions, where forward directivity and fling-step effects dominate, lead to significantly higher DSC rocking and sliding. Far-field cases, by contrast, generally exhibit modest responses. Incorporating SSI tends to amplify or alter DSC response spectra and introduce response variability, which underscores the need for site-specific evaluations and robust modeling approaches to ensure the seismic integrity of DSCs in interim spent fuel storage installations.

Das, Tonmoy↗

Performance and kinetic study of semi-dry thermophilic anaerobic digestion of organic fraction of municipal solid waste

Highlights: • Performance of the reactor was evaluated by the degradation of volatile solids. • Biogas yield at the end of the digestion was 52.9 L/kg VS. • Value of reaction rate constant, k, obtained was 0.0249 day{sup −1}. • During the digestion 66.7% of the volatile solid degradation was obtained. - Abstract: Anaerobic digestion (AD) of the organic fraction of municipal solid waste (OFMSW) is promoted as an energy source and waste disposal. In this study semi dry anaerobic digestion of organic solid wastes was conducted for 45 days in a lab-scale batch experiment for total solid concentration of 100 g/L for investigating the start-up performances under thermophilic condition (50 °C). The performance of the reactor was evaluated by measuring the daily biogas production and calculating the degradation of total solids and the total volatile solids. The biogas yield at the end of the digestion was 52.9 L/kg VS (volatile solid) for the total solid (TS) concentration of 100 g/L. About 66.7% of the volatile solid degradation was obtained during the digestion. A first order model based on the availability of substrate as the limiting factor was used to perform the kinetic studies of batch anaerobic digestion system. The value of reaction rate constant, k, obtained was 0.0249 day{sup −1}.

09 BIOMASS FUELS↗

Structure Development of the Interphase between Drying Cellulose Materials Revealed by In Situ Grazing-Incidence Small-Angle X-ray Scattering

The nano- to microscale structures at the interface between materials can define the macroscopic material properties. These structures are extremely difficult to investigate for complex material systems, such as cellulose-rich materials. The development of new model cellulose materials and measuring techniques has opened new possibilities to resolve this problem. We present a straightforward approach combining micro-focusing grazing-incidence small-angle X-ray scattering and atomic force microscopy (AFM) to investigate the structural rearrangements of cellulose/cellulose interfaces in situ during drying. Based on the results, we propose that molecular interdiffusion and structural rearrangement play a major role in the development of the properties of the cellulose/cellulose interphase; this model is representative of the development of the properties of joint/contact points between macroscopic cellulose fibers.

36 MATERIALS SCIENCE↗

High-Performance Catalytic Four-Channel Hollow Fibers with Highly Dispersed Nickel Nanoparticles Prepared by Atomic Layer Deposition for Dry Reforming of Methane

In this study, highly dispersed nickel (Ni) nanoparticles (NPs) with an average particle size of 4.3 nm were uniformly deposited on the outer surface, the inner channel surface, and inside the pores of 20-cm long 4-channel α-Al 2 O 3 hollow fibers (HFs) by atomic layer deposition (ALD) for dry reforming of methane (DRM). Cerium oxide (CeO 2 ) was added to promote the catalytic performance of Ni/Al 2 O 3 -HF catalysts. Rationally designed filling methods, by tuning the reactor size and inert fillings, can reduce the catalyst bed voidage in a fixed bed reactor for better reactant gas distribution, effectively utilize the Ni reactive sites, and achieve excellent catalytic performance. It was found that the CeO 2 -promoted Ni/Al 2 O 3 -HF catalyst was highly active and highly stable without deactivation during an overall 400-hr DRM test at 850 ºC. CeO 2 with reversible valence states could participate in surface reactions; especially, the formation of CeAlO 3 provided sufficient surface Ce 3+ for CO 2 activation and enhanced the stability and reusability of the HF catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO 2 Hydrogenation to Methanol over Inverse ZrO 2 /Cu(111) Catalysts: The Fate of Methoxy under Dry and Wet Conditions

Understanding the surface chemistry of CH 3 O species is essential for the production of methanol by CO 2 hydrogenation over Cu-based heterogeneous catalysts, as it facilitates the rational design of more efficient conversion processes. Recent research has identified inverse ZrO 2 /Cu catalysts as highly active and selective systems for the transformation of CO 2 to methanol with a performance that can be better than that of commercial Cu/ZnO catalysts. Here, we employed synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and calculations based on density functional theory (DFT) to understand the fate of CH 3 O groups under dry and wet environments. AP-XPS spectra revealed that under CO 2 hydrogenation conditions, formate and methoxy are two key intermediates to produce methanol. Furthermore, there are three different types of reactive sites on the surface: One is active for methoxy adsorption, which is stable and responsible for the methanol synthesis; Another one transforms CO 2 into CO; and a third one is active for CO 2 and methoxy dissociation, leading to C and methane formation. The theoretical calculations indicate that CH 3 OH readily dissociates to CH 3 O species following a highly exothermic (ΔE = -20.99 kcal/mol) and barrierless process. The water produced by the reverse water-gas shift reaction (CO 2 + H 2 → H 2 O + CO) can prevent the decomposition of CH 3 O species. We discovered that by introducing a tiny amount of water vapor (2 × 10 -6 Torr) into the reaction chamber, the energy barrier for the reaction CH 3 O(ads) + H(ads) → CH 3 OH(gas) is dramatically reduced. AP-XPS and computational modelling showed that water is quite capable of extracting adsorbed methoxy to form gaseous methanol. With this in mind, one could boost the methanol selectivity by adding appropriate amounts of water or steam, which is an inexpensive and feasible solution for industrial operations.

36 MATERIALS SCIENCE↗

Surface Basic Site Effect on Boron-Promoted Platinum Catalysts for Dry Reforming of Methane

Platinum has been shown to be an active catalyst for the dry reforming of methane (DRM), which converts CO 2 and CH 4 into 2CO and 2H 2 (synthesis gases) that can further be processed to produce valuable chemical feedstocks. Catalytic activity is often improved by the addition of promoter atoms, which are typically transition metals or noble metals, such as PtNi and PtSn. Recently, boron has shown to be an effective and low-cost catalyst promoter. Pt/B/SiO 2 catalysts were prepared for DRM catalysis and compared with Pt/SiO 2 catalysts without boron promotion. Both catalysts had similar surface concentrations of platinum, but the catalytic activity at 750 °C after 14 h for boron-containing catalyst was very high, resulting in nearly 100% CO 2 conversion and a H 2 /CO ratio close to unity, compared to 12% CO 2 conversion and H 2 /CO of 0.35 for boron-free Pt/SiO 2 . The catalysts were investigated with X-ray absorption spectroscopy (XAS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and CO 2 temperature-programmed desorption (CO 2 -TPD) to identify the deactivating factors. It was determined that neither platinum nanoparticle sintering nor coking was a significant factor in catalyst deactivation; instead, boron had an effect on the reactive surface groups on the SiO 2 support. Finally, these surface groups, such as hydroxyls and surface basic sites, enhance the adsorption of CO 2 and potentially stabilize intermediate carbonate species, resulting in a high CO 2 conversion for boron-promoted platinum catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Macroscopic 3D Nanoporosity Formation by Dry Oxidation of AgAu Alloys

3D nanoporous metals made by alloy corrosion have attracted much attention due to various promising applications ranging from catalysis and sensing to energy storage and actuation. In this work we report a new process for the fabrication of 3D open nanoporous metal networks that phenomenologically resembles the nano-Kirkendall hollowing process previously reported for Ag/Au nanowires and nanoparticles, with the difference that the involved length scales are 10–100 times larger. Specifically, we find that dry oxidation of Ag 70 Au 30 bulk alloy samples by ozone exposure at 150 °C stimulates extremely rapid Ag outward diffusion toward the gas/alloy-surface interface, at rates at least 5 orders of magnitude faster than predicted on the basis of reported Ag bulk diffusion values. The micrometer-thick Ag depleted alloy region thus formed transforms into a 3D open nanoporous network morphology upon further exposure to methanol–O 2 at 150 °C. These findings have important implications for practical applications of alloys, for example as catalysts, by demonstrating that large-scale compositional and morphological changes can be triggered by surface chemical reactions at low temperatures, and that dilute alloys such as Au 97 Ag 3 are more resilient against such changes.

25 ENERGY STORAGE↗

Surface Structure Dependence of the Dry Dehydrogenation of Alcohols on Cu(111) and Cu(110)

The non-oxidative dehydrogenation of alcohols is considered as an important method to produce aldehydes for the chemical industry and hydrogen gas. However, current industrial processes are oxidative, meaning that the aldehydes are formed along with water, which, in addition to being less energy efficient, poses separation problems. Herein the production of aldehydes from methanol and ethanol on clean and dry Cu(111) and Cu(110) surfaces was investigated in order to understand the catalytic anhydrous dehydrogenation of alcohols. We report both ethanol and methanol preferentially react under ultrahigh vacuum conditions at surface defects to yield acetaldehyde and formaldehyde, respectively, in the absence of surface oxygen and water. The amount of alkoxide reaction intermediates measured by scanning tunneling microscopy, and aldehyde and hydrogen products detected by temperature programmed reaction, are increased by inducing more defects in the Cu substrates with Ar ion sputtering. This work also reveals that the Cu model surfaces are not poisoned by the reaction and exhibit 100% selectivity for alcohol dehydrogenation to aldehyde and hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DMOF-1 as a Representative MOF for SO 2 Adsorption in Both Humid and Dry Conditions

The mixed-ligand metal–organic framework (MOF) DMOF-1 has been successfully synthesized via ligand: 2,3,5,6-tetramethylterephthalic acid (TM), 9,10-anthracenedicarboxylic acid (ADC), 1,4-naphthalenedicarboxylic acid (NDC), 2,5-dimethyl terephthalic acid (DM), and metal (Zn, Cu, Ni, Co) substitutions to develop structure–property relationships for adsorption of water and SO 2 , an acid gas commonly found in flue gas streams at ppm-level concentrations. The substitution of bulky ligands, TM and ADC, resulted in not only improved water stability but also stability toward dry SO 2 , whereas substitution with NDC and DM did not provide water or SO 2 stability. ADC-functionalized Zn–DMOF exhibited the greatest stability under humid SO 2 exposure of the ligand-functionalized materials that were tested. Metal substitution of Cu into the DMOF–TM structure resulted in the greatest stability of the M–DMOF–TM samples upon exposure to humid SO 2 , and Ni–DMOF–TM provided the second most stable material. Finally, these results follow the prediction of the Irving–Williams series of metal node/ligand bond strengths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Steering the Methane Dry Reforming Reactivity of Ni/La 2 O 3 Catalysts by Controlled In Situ Decomposition of Doped La 2 NiO 4 Precursor Structures

The influence of A- and/or B-site doping of Ruddlesden-Popper perovskite materials on the crystal structure, stability, and dry reforming of methane (DRM) reactivity of specific A 2 BO 4 phases (A = La, Ba; B = Cu, Ni) has been evaluated by a combination of catalytic experiments, in situ X-ray diffraction, X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and aberration-corrected electron microscopy. At room temperature, B-site doping of La 2 NiO 4 with Cu stabilizes the orthorhombic structure ( Fmmm ) of the perovskite, while A-site doping with Ba yields a tetragonal space group ( I 4/ mmm ). We observed the orthorhombic-to-tetragonal transformation above 170 °C for La 2 Ni 0.9 Cu 0.1 O 4 and La 2 Ni 0.8 Cu 0.2 O 4 , slightly higher than for undoped La 2 NiO 4 . Loss of oxygen in interstitial sites of the tetragonal structure causes further structure transformations for all samples before decomposition in the temperature range of 400 °C-600 °C. Controlled in situ decomposition of the parent or A/B-site doped perovskite structures in a DRM mixture (CH 4 :CO 2 = 1:1) in all cases yields an active phase consisting of exsolved nanocrystalline metallic Ni particles in contact with hexagonal La 2 O 3 and a mixture of (oxy)carbonate phases (hexagonal and monoclinic La 2 O 2 CO 3 , BaCO 3 ). Differences in the catalytic activity evolve because of (i) the in situ formation of Ni-Cu alloy phases (in a composition of >7:1 = Ni:Cu) for La 2 Ni 0.9 Cu 0.1 O 4 , La 2 Ni 0.8 Cu 0.2 O 4 , and La 1.8 Ba 0.2 Ni 0.9 Cu 0.1 O 4 , (ii) the resulting Ni particle size and amount of exsolved Ni, and (iii) the inherently different reactivity of the present (oxy)carbonate species. Based on the onset temperature of catalytic DRM activity, the latter decreases in the order of La 2 Ni 0.9 Cu 0.1 O 4 ~ La 2 Ni 0.8 Cu 0.2 O 4 ≥ La 1.8 Ba 0.2 Ni 0.9 Cu 0.1 O 4 > La 2 NiO 4 > La 1.8 Ba 0.2 NiO 4 . Simple A-site doped La 1.8 Ba 0.2 NiO 4 is essentially DRM inactive. The Ni particle size can be efficiently influenced by introducing Ba into the A site of the respective Ruddlesden-Popper structures, allowing us to control the Ni particle size between 10 nm and 30 nm both for simple B-site and A-site doped structures. Hence, it is possible to steer both the extent of the metal-oxide-(oxy)carbonate interface and its chemical composition and reactivity. Counteracting the limitation of the larger Ni particle size, the activity can, however, be improved by additional Cu-doping on the B-site, enhancing the carbon reactivity. Exemplified for the La 2 NiO 4 based systems, we show how the delicate antagonistic balance of doping with Cu (rendering the La 2 NiO 4 structure less stable and suppressing coking by efficiently removing surface carbon) and Ba (rendering the La 2 NiO 4 structure more stable and forming unreactive surface or interfacial carbonates) can be used to tailor prospective DRM-active catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion and Water Dynamics in the Transition from Dry to Wet Conditions in Salt-Doped PEG

The influence of the water content on ion and water transport mechanisms in polymer membranes under low to moderate hydration conditions remains poorly understood. In this study, we combine ion and water diffusivity (PFG-NMR) measurements with atomistic molecular dynamics simulations to better understand transport processes in hydrated salt-doped poly(ethylene glycol). Above the water percolation threshold, the experimental and simulated diffusivities are in good agreement with the free volume transport models. At low hydration levels, unlike dry systems, ion diffusion cannot be described by polymer segmental dynamics alone. We rationalize such observations by the interplay between ion–water and ion–polymer solvation of cations and between ion–water and cation–anion interactions for anions. Further, we demonstrate that a two-state model combining ion–water solvation and free volume transport can describe water dynamics across the entire hydration range of interest. Here, our findings provide a more encompassing analysis of ion and water transport in hydrated polyelectrolytes, specifically in the low hydration regime.

36 MATERIALS SCIENCE↗

High-Resolution X-ray Spectromicroscopy Reveals Process-Structure Correlations in sub-5-μm Diameter Carbon Nanotube-Polymer Composite Dry-Spun Yarns

A persistent lack of detailed and quantitative structural analysis of these hierarchical carbon nanotube (CNT) ensembles precludes establishing processing-structure-property relationships that are essential to enhance macroscale performance (e.g., in mechanical, electrical, thermal applications). Here, in this work, we use scanning transmission X-ray microscopy (STXM) to analyze the hierarchical, twisted morphology of dry-spun CNT yarns and their composites, quantifying key structural characteristics such as density, porosity, alignment, and polymer loading. As the yarn twist density increases (15,000 to 150,000 turns per meter), the yarn diameter decreased (4.4–1.4 μm) and density increased (0.55–1.26 g·cm –3 ), as intuitively expected. Yarn density, ρ, ubiquitously scaled with diameter d according to ρ ~ d –2 for all parameters studied here. Spectromicroscopy probes with 30 nm resolution and elemental specificity were employed to analyze the radial and longitudinal distribution of the oxygen-containing polymer content (~30% weight fraction), demonstrating nearly perfect filling of the voids between CNTs with a vapor-phase polymer coating and cross-linking process. These quantitative correlations highlight the intimate connections between processing conditions and yarn structure with important implications for translating the nanoscale properties of CNTs to the macroscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗