Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drive beam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Microstructure Filled Hohlraums

We propose replacing the gas fill in a hohlraum with a low average density, variable uniformity 3D printed structure. This creates a bimodal hohlraum which acts like a vacuum hohlraum initially during the picket, but could protect the capsule from glint or direct illumination, and then once expanded, homogenizes to behave like a variable z gas-fill during peak portion of the drive. This is motivated by a two main aims: 1) reduction of the Au bubble velocity to improve inner beam propagation, and 2) the introduction of a low density, high-Z, x-ray converter to improve x-ray production in the hohlraum and uniformity of the radiation field seen by the capsule.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical simulations of adiabatic axisymmetric accretion flow. I - A new mechanism for the formation of jets

Numerical simulations of the uniform axisymmetric flow past a gravitating sphere have been studied. It is found that the structure of the flow is extremely sensitive to the boundary condition at the surface of the gravitating object. For the case in which the boundary is totally absorbing, a steady state flow is reached. However, for a boundary which is not totally absorbing, steady state flows are not obtained. The morphology of the flow is also sensitive to the Mach number at infinity and to the ratio of the free-fall velocity at the surface of the gravitating object to the flow velocity at inifinity. A new mechanism for the formation of jets is identified in which a fraction of the accretion energy is tapped to drive an anisotropic supersonic outflow with collimation provided by a combination of the inertia of matter which surrounds the beam and the development of multiple shock structures.

Fryxell, B. A.↗

New Submount Requirement of Conductively Cooled Laser Diodes for Lidar Applications

New submount technology is essential for the development of conductively cooled high power diode laser. The simulation and experimental results indicate that thermal conductivity of submount for high power laser-diode must be at least 600 W/m/k or higher for stable operation. We have simulated several theoretical thermal model based on new submount designs and characterized high power diode lasers to determine temperature effects on the performances of laser diodes. The characterization system measures the beam power, output beam profile, temperature distribution, and spectroscopic property of high power diode laser. The characterization system is composed of four main parts: an infrared imaging camera, a CCD camera, a monochromator, and a power meter. Thermal characteristics of two commercial-grade CW 20-W diode laser bars with open heat-sink type were determined with respect to the line shift of emission spectra and beam power stability. The center wavelength of laser emission has a tendency to shift toward longer wavelength as the driving current and heat sink temperature are increased. The increase of heat sink temperature decreases the output power of the laser bar too. Such results lay the guidelines for the design of new submount for high power laser-diodes.

Mo, S. Y.↗

FACET: SLAC___s New User Facility

FACET (Facility for Advanced Accelerator Experimental Tests) is a new User Facility at SLAC National Accelerator Laboratory. The first User Run started in spring 2012 with 20 GeV, 3 nC electron beams. The facility is designed to provide short (20 {micro}m) bunches and small (20 {micro}m wide) spot sizes, producing uniquely high power beams. FACET supports studies from many fields but in particular those of Plasma Wakefield Acceleration and Dielectric Wakefield Acceleration. The creation of drive and witness bunches and shaped bunch profiles is possible with 'Notch' Collimation. FACET is also a source of THz radiation for material studies. Positrons will be available at FACET in future user runs. We present the User Facility and the available tools and opportunities for future experiments.

43 PARTICLE ACCELERATORS↗

Bunch characteristics of an electron beam generated by a diamond secondary emitter amplifier

Electron bunches for high performance free electron lasers are subject to constraints on charge per bunch and pulse shape. A Diamond secondary emitter used in conjunction with a photocathode and drive laser has potential to enable a high brightness, high peak current photoinjector by increasing the effective quantum efficiency of the photocathode. A theoretical characterization of the bunches so produced has been heretofore absent. Using a combination of Monte Carlo and analytical models, the shape of the bunches, their transit time, and emission time constants are determined and shown to be sensitive to the accelerating field in the diamond flake, incident beam profile, doping, and surface conditions. Methods to allow for extension to regimes of technological interest in terms of diamond thickness, external field, and primary pulse shape are given.

07 ISOTOPE AND RADIATION SOURCES↗

All-Optical Micro Motors Based on Moving Gratings in Photosensitive Media

An all-optical micromotor with a rotor driven by a traveling wave of surface deformation of a stator being in contact with the rotor is being studied. Instead of an ultrasonic wave produced by an electrically driven piezoelectric actuator as in ultrasonic motors, the wave is a result of a photo-induced surface deformation of a photosensitive material produced by an incident radiation. A thin piezoelectric polymer will deform more easily LiNbO3 or metal when irradiated with light. The type of photosensitive material studied are piezoelectric polymers with and without coatings for connecting electrodes. In order to be considered as a possible candidate for micromotors, the material should exhibit surface deformation produced by a laser beam of the order of 10 microns. This is compared to the deformations produced by static holographic gratings studied in photorefractive crystals of LiNbO3 using high vertical resolution surface profilometer Dektak 3 and surface interferometer WYKO. An experimental setup showing the oscillations has been developed. The setup uses a chopped beam from an Argon ion laser to produce the deformation while a probe beam is reflected by the thin film into a fiber which is then detected on an oscilloscope. A ramp voltage signal generator will drive the piezoelectric film in another experiment to determine the resonance of the film. A current is generated when light is incident upon the film and this current can be measured. The reverse process has already been demonstrated in other piezoelectric actuators. Changing voltage, polarity, and frequency of the signal can easily generate vibrations similar to those when light is incident on the film. This can be compared to the effects of laser interaction with light absorbing fluids such as solutions of 2,9,16,23-Tetrakis(phenylthio)-29H, 31 H-phthalocyanine in chlorobenzene in capillary tubes, The possibility of using a liquid with the piezoelectric film would be a novel idea for a micromotor since the interaction of a single low power focused laser beam at 633 nm with such fluid produced an intensive circular motion.

Curley, M.↗

Species mix & distribution function dependence of energetic-ion driven magnetospheric instabilities on DIII-D (Final Report)

Energetic ions drive a rich variety of instabilities in the complex multi-species plasma of Earth’s magnetosphere. This experiment exploited the highly flexible, high power particle beam injection capability and sophisticated diagnostic suite of the DIII-D tokamak to advance understanding of two particular instabilities of significant interest to the magnetospheric research community that have closely-related counterparts in beam-heated tokamak plasmas: electromagnetic ion cyclotron waves (EMIC) [1], observed at frequencies somewhat below the ion cyclotron frequencies of bulk ion species, and equatorial noise [2], observed at energetic-ion cyclotron harmonics. In the magnetic fusion energy domain, such waves are called ICE (Ion Cyclotron Emission). Recent substantial advances in diagnostic capability in the ion cyclotron range of frequencies in DIII-D, including measurement of wave polarization, spa)al structure and amplitude created an exciting opportunity to challenge and drive advances in theoretical understanding of these phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rapid HIFU autofocusing using the entire MR-ARFI image

Phase aberrations and attenuations caused by bone can defocus HIFU in the brain and organs behind the ribcage. To refocus the beam, MR-ARFI can be used to measure tissue displacements created by each element in the transducer, and optimize driving signal delays and amplitudes. We introduce a new MR-ARFI-based autofocusing method that requires many fewer image acquisitions than current methods. The method is validated in simulations of bone and brain HIFU transducers, and compared to a conventional method.

60 APPLIED LIFE SCIENCES↗

Sensitivity of transport and stability to the current profile in steady-state scenario plasmas in DIII-D

Recent experiments on DIII-D have provided the first systematic data on the impact of the current profile on the transport and stability properties of high-performance, steady-state scenario plasmas. In a future tokamak, to achieve 100% noninductive conditions and produce net power, the current profile J must be sustained by a large fraction of bootstrap current J{sub BS}, which is nonlinearly coupled with the kinetic profiles. Systematic scans of q{sub min} and q{sub 95} were performed to determine empirically the best alignment of the noninductive currents with J and the variation of the transport properties with q. Transport analysis indicates that {chi}{sub e} and {chi}{sub i} are sensitive to the details of J in a way that makes the pressure profile peaking and J{sub BS} scale nonlinearly with both q and {beta} in the experiment. Drift wave stability analysis yields linear growth rates that do not reproduce experimental trends in {chi} with q{sub min} and q{sub 95}. At high beta, necessary to maximize f{sub BS}, the plasma duration is often limited by n=1 tearing modes, whose stability also depends on the J profile. Broadly deposited electron cyclotron (EC) current at mid-radius was found to supply part of the required noninductive current and to positively affect the tearing stability. The modes appear when J{sub EC} is turned off for stable cases and always appear when the EC deposition is shifted outwards. The variation in the EC scan results is consistent with PEST3 calculations, showing that the tearing stability becomes extremely sensitive to small perturbations of the equilibrium in wall-stabilized plasmas run close to the ideal MHD limit. These modeling results are being used to design new experiments with higher ideal and tearing limits. A new capability for off-axis neutral beam injection system will be used to explore higher q{sub min} scenarios and different current alignments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accurate modelling of anisotropic effects in austenitic stainless steel welds

The ultrasonic inspection of austenitic steel welds is challenging due to the formation of highly anisotropic and heterogeneous structures post-welding. This is due to the intrinsic crystallographic structure of austenitic steel, driving the formation of dendritic grain structures on cooling. The anisotropy is manifested as both a ‘steering’ of the ultrasonic beam and the back-scatter of energy due to the macroscopic granular structure of the weld. However, the quantitative effects and relative impacts of these phenomena are not well-understood. A semi-analytical simulation framework has been developed to allow the study of anisotropic effects in austenitic stainless steel welds. Frequency-dependent scatterers are allocated to a weld-region to approximate the coarse grain-structures observed within austenitic welds and imaged using a simulated array. The simulated A-scans are compared against an equivalent experimental setup demonstrating excellent agreement of the Signal to Noise (S/N) ratio. Comparison of images of the simulated and experimental data generated using the Total Focusing Method (TFM) indicate a prominent layered effect in the simulated data. A superior grain allocation routine is required to improve upon this.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electromagnetically induced blazed grating at low light levels

We propose a scheme for inducing a blazed transmission grating in a four-level, N-type atomic medium under electromagnetically induced transparency (EIT). The blazed grating relies on the giant Kerr nonlinearity that the atomic medium exhibits under EIT. The grating is created using an intensity mask in one of the driving optical fields and only weak fields with intensities below saturation level are involved. Diffraction efficiencies of a resonant probe beam close to 100% are predicted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A stacked transformer modulator that delivers high voltage at a high rep-rate and duty factor

A modulator has been built to drive the gun anode of the Tevatron electron lenses (TEL) at Fermilab. High voltage applied to the gun defines electron beam current in order for the TEL to perform beam-beam compensation in the Tevatron on each of the 36 (anti)proton bunches. Every bunch requires its own defined current, and the value of current for each bunch is different with each Tevatron ¿store¿. These requirements demand the modulator deliver a complex output voltage waveform with a high duty factor and high repetition rate exceeding 5 kV. The modulator described here utilizes a novel circuit topology employing 5 pulse transformers whose secondaries are connected in series to produce complex voltage waveforms played out repeatedly having peak voltages of 6 kV with average periodic rates up to 423 kHz and short bursts at 2.5 MHz. This paper describes the design approach taken to leverage the virtues of transformers for high rep-rates and duty factors while dealing with the adverse effects of parasitics to achieve speed. Design details and performance results are presented.

Saewert, G.↗

Four Beam Generation for Simultaneous Four-Hall Operation at CEBAF

As part of the CEBAF 12 GeV upgrade at Jefferson Lab, a new experimental hall was added to the existing three halls. To deliver beam to all four halls simultaneous-ly, a new timing pattern for electron bunches is needed at the injector. This pattern change has consequences for the frequency of the lasers at the photogun, beam behavior in the chopping system, beam optics due to space charge, and setup procedures. We have successfully demonstrated this new pattern using the three existing drive lasers. The implementation of the full system will occur when the fourth laser is added and upgrades to the Low Level RF (LLRF) are complete. In this paper we explain the new bunch pattern, the challenges for setting and measuring the pattern such as 180° RF phase ambiguity, addition of the fourth laser to the laser table and LLRF upgrade.

Kazimi, Reza↗

DARHT Axis 1 Time-Resolved Injector Energy Measurement

The Dual-Axis Radiographic Hydrodynamic Test (DARHT) facility provides flash radiography capabilities using electron Linear Induction Accelerators (LIA’s). The strict requirements for flash radiography require a detailed understanding of the LIA’s performance, including precision measurements of the injected electron beam energy. The DARHT Axis 1 injector of produces a 3-4 MeV, 1-2 kA, 80-ns-FWHM electron beam. Injector capacitive monitors (EVACSUM) are summed to give the injector beam energy. Calibration of EVACSUM was last done in 1999 and is needed. In addition, the flatness of the injector drive voltage is controlled by a peaking capacitor in a Blumlien that is charged by the prime power tank. Time resolved measurements are used to optimize the value of this capacitor.

47 OTHER INSTRUMENTATION↗

Space Fabrication Demonstration System

Progress in the mechanical/structural assembly of the beam builder is reported. The following structures were investigated: cross brace magazine/dispenser subsystem; and rolling mill supply reel, guide, and drive. The fabrication facility design and a detail design of all major subsystem components are discussed. The number of spot welds per structural joint were reduced which enables the doubling of length of truss which can be produced within known electrode life limits.

Source record↗

The 250-kW CW klystron amplifier for planetary radar

The design, construction, and performance testing is described of two Varian klystrons, model VKX-7864A, which replaced the aging and less efficient VA-949J klystrons in the X band planetary radar transmitter on the Goldstone, CA, 70 meter antenna. The project was carried out jointly by the JPL and Varian Assoc. Output power was increased from 200 to 250 kW continuous wave per klystron, and full dc beam power is dissipated in the collector (it was not possible to operate the VA-949J klystrons without RF drive because of limited collector dissipation capability). Replacements were made with a minimum of transmitter modifications. The planetary radar transmitter is now operating successfully with these two klystrons.

Cormier, R.↗

250-kW CW klystron amplifier for planetary radar

The design, construction, and performance testing is described of two Varian klystrons, model VKX-7864A, which replaced the aging and less efficient VA-949J klystrons in the X band planetary radar transmitter on the Goldstone, CA, 70 meter antenna. The project was carried out jointly by the JPL and Varian Assoc. Output power was increased from 200 to 250 kW continuous wave per klystron, and full dc beam power is dissipated in the collector (it was not possible to operate the VA-949J klystrons without RF drive because of limited collector dissipation capability). Replacement were made with a minimum of transmitter modifciations. The planetary radar transmitter is now operating successfully with these two klystrons.

Cormier, Reginald A.↗

Inertial electrostatic confinement as a power source for electric propulsion

The potential use of an INERTIAL ELECTROSTATIC CONFINEMENT (IEC) power source for space propulsion has previously been suggested by the authors and others. In the past, these discussions have generally followed the charged-particle electric-discharge engine (QED) concept proposed by Bussard, in which the IEC is used to generate an electron beam which vaporizes liquid hydrogen for use as a propellant. However, an alternate approach is considered, using the IEC to drive a 'conventional' electric thruster unit. This has the advantage of building on the rapidly developing technology for such thrusters, which operate at higher specific impulse. Key issues related to this approach include the continued successful development of the physics and engineering of the IEC unit, as well as the development of efficient step-down dc voltage transformers. The IEC operates by radial injection of energetic ions into a spherical vessel. A very high ion density is created in a small core region at the center of the vessel, resulting in extremely high fusion power density in the core. Experiments at the U. of Illinois in small IEC devices (is less than 60 cm. dia.) demonstrated much of the basic physics underlying this concept, e.g. producing 10(exp 6) D-D neutrons/sec steady-state with deuterium gas flow injection. The ultimate goal is to increase the power densities by several orders of magnitude and to convert to D-He-3 injection. If successful, such an experiment would represent a milestone proof-of-principle device for eventual space power use. Further discussion of IEC physics and status are presented with a description of the overall propulsion system and estimated performance.

Miley, G. H.↗