Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dependable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Strongly temperature dependent ferroelectric switching in AlN, Al 1-x Sc x N, and Al 1-x B x N thin films

This manuscript reports the temperature dependence of ferroelectric switching in Al 0.84 Sc 0.16 N, Al 0.93 B 0.07 N, and AlN thin films. Polarization reversal is demonstrated in all compositions and is strongly temperature dependent. Between room temperature and 300 °C, the coercive field drops by almost 50% in all samples, while there was very small temperature dependence of the remanent polarization value. Furthermore, over this same temperature range, the relative permittivity increased between 5% and 10%. Polarization reversal was confirmed by piezoelectric coefficient analysis and chemical etching. Applying intrinsic/homogeneous switching models produces nonphysical fits, while models based on thermal activation suggest that switching is regulated by a distribution of pinning sites or nucleation barriers with an average activation energy near 28 meV.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of local order parameter dependent transport coefficient in diblock copolymers under applied electric fields

In this work, we present an approach for constructing thermodynamically consistent time-dependent models relevant to thin films of diblock copolymers in applied electric fields. The approach is based on the principles of linear irreversible thermodynamics, and, in this work, it is applied to study the effects of electric fields on thin films of incompressible diblock copolymers. Enforcement of local incompressibility constraint at all times leads to a local order parameter dependent transport coefficient in the model for the diblock copolymers. The dependence of the transport coefficient on the local order parameter is used to relate it with the diffusion constant of Rouse chains and leads to sensitivity of the model to initial conditions. In addition, transient behavior is found to be affected when compared with an ad hoc model assuming a constant transport coefficient. Numerical results such as electric field induced alignment of lamellae domains due to the field are found to be in qualitative agreement with experiments. This approach opens up a systematic way of developing kinetic models for simulating effects of electrolytes added to thin films containing diblock copolymers in the presence of applied electric fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enforcing detailed balance in the Borgnakke–Larsen redistribution method with temperature dependent relaxation models

For decades, it has been observed that the commonly used Borgnakke–Larsen method for energy redistribution in Direct Simulation Monte Carlo codes fails to satisfy the principle of detailed balance when coupled to a wide variety of temperature dependent relaxation models, while seemingly satisfying detailed balance when coupled to others. Many attempts have been made to remedy the issue, yet much ambiguity remains, and no consensus appears in the literature regarding the root cause of the intermittent compatibility of the Borgnakke–Larsen method with temperature dependent relaxation models. This paper alleviates that ambiguity by presenting a rigorous theoretical derivation of the Borgnakke–Larsen method's requirement for satisfying detailed balance. Specifically, it is shown that the Borgnakke–Larsen method maintains detailed balance if and only if the probability of internal-energy exchange during a collision depends only on collision invariants (e.g., total energy). Here, the consequences of this result are explored in the context of several published definitions of relaxation temperature, including translational, total, and cell-averaged temperatures. Of particular note, it is shown that cell-averaged temperatures, which have been widely discussed in the literature as a way to ensure equilibrium is reached, also fail in a similar, although less dramatic, fashion when the aforementioned relationship is not enforced. The developed theory can be used when implementing existing or new relaxation models and will ensure that detailed balance is satisfied.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Nonadiabatic Molecular Dynamics Simulations Based on Time-Dependent Density Functional Tight-Binding Method

Nonadiabatic excited-state molecular dynamics underpin many photophysical and photochemical phenomena, such as exciton dynamics, charge separation and transport. In this work, we present an efficient nonadiabatic molecular dynamic (NAMD) simulation method based on time-dependent density functional tight-binding (TDDFTB) theory. Specifically, the adiabatic electronic structure, an essential NAMD input, is described at the TDDFTB level. Here, the nonadiabatic effects originating from the coupled motions of electrons and nuclei are treated by the trajectory surface hopping algorithm. To improve the computational efficiency, nonadiabatic couplings between excited states within the TDDFTB method are derived and implemented using an analytical approach. Further, the time-dependent nonadiabatic coupling scalars are calculated based on the overlap between molecular orbitals rather than the Slater determinants to speed up the simulations. In addition, the electronic decoherence scheme and a state reassigned unavoided crossings algorithm, which has been implemented in the NEXMD software, are used to improve the accuracy of the simulated dynamics and handle trivial unavoided crossings. Finally, the photoinduced nonadiabatic dynamics of a benzene molecule are simulated to demonstrate our implementation. The results for excited state NAMD simulations of benzene molecule based on TDDFTB method compare well that obtained with numerically expensive time-dependent density functional theory. The proposed methodology provides an attractive theoretical simulation tool for predicting the photophysical and photochemical properties of complex materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Strain- and thickness-dependent magnetic properties of epitaxial La 0.67 Sr 0.33 CoO 3 /La 0.67 Sr 0.33 MnO 3 bilayers

Magnetic properties and interfacial phenomena of epitaxial perovskite oxides depend sensitively on parameters such as film thickness and strain state. In this work, epitaxial La0 .67 Sr 0.33 CoO 3 (LSCO)/La 0.67 Sr 0.33 MnO 3 (LSMO) bilayers were grown on NdGaO 3 (NGO) and LaAlO 3 (LAO) substrates with a fixed LSMO thickness of 6 nm, and LSCO thickness (t LSCO ) varying from 2 to 10 nm. Soft x-ray magnetic spectroscopy revealed that magnetically active Co 2+ ions that strongly coupled to the LSMO layer were observed below a critical t LSCO for bilayers grown on both substrates. On LAO substrates, this critical thickness was 2 nm, above which the formation of Co 2+ ions was quickly suppressed leaving only a soft LSCO layer with mixed valence Co 3+ /Co 4+ ions. The magnetic properties of both LSCO and LSMO layers displayed strong t LSCO dependence. This critical t LSCO increased to 4 nm on NGO substrates, and the magnetic properties of only the LSCO layer displayed t LSCO dependence. A non-magnetic layer characterized by Co 3+ ions and with a thickness below 2 nm exists at the LSCO/substrate interface for both substrates. Therefore, the results contribute to the understanding of interfacial exchange spring behavior needed for applications in next generation spintronic and magnetic memory devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Time-dependent saturation and physics-based nonlinear model of cross-beam energy transfer

The nonlinear physics of cross-beam energy transfer (CBET) for multi-speckled laser beams is examined using large-scale particle-in-cell simulations for a range of laser and plasma conditions relevant to indirect-drive inertial confinement fusion (ICF) experiments. The time-dependent growth and saturation of CBET involve complex, nonlinear ion and electron dynamics, including ion trapping-induced enhancement and detuning, ion acoustic wave (IAW) nonlinearity, oblique forward stimulated Raman scattering (FSRS), and backward stimulated Brillouin scattering (BSBS) in a CBET-amplified seed beam. Ion-trapping-induced detuning of CBET is captured in the kinetic linear response by a new δf-Gaussian-mixture algorithm, enabling an accurate characterization of trapping-induced non-Maxwellian distributions. Ion trapping induces nonlinear processes, such as changes to the IAW dispersion and nonlinearities (e.g., bowing and self-focusing), which, together with pump depletion, FSRS, and BSBS, determine the time-dependent nature and level of CBET gain as the system approaches a steady state. Using VPIC simulations at intensities at and above the onset threshold for ion trapping and the insight from the time-dependent saturation analyses, we construct a nonlinear CBET model from local laser and plasma conditions that predicts the CBET gain and the energy deposition into the plasma. This model is intended to provide a more accurate, physics-based description of CBET saturation over a wide range of conditions encountered in ICF hohlraums compared with linear CBET gain models with ad hoc saturation clamps often used in laser ray-based methods in multi-physics codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Size-dependent errors in real-time electron density propagation

Real-time (RT) electron density propagation with time-dependent density functional theory (TDDFT) or Hartree–Fock (TDHF) is one of the most popular methods to model the charge transfer in molecules and materials. However, both RT-TDHF and RT-TDDFT within the adiabatic approximation are known to produce inaccurate evolution of the electron density away from the ground state in model systems, leading to large errors in charge transfer and erroneous shifting of peaks in absorption spectra. Given the poor performance of these methods with small model systems and the widespread use of the methods with larger molecular and material systems, here we bridge the gap in our understanding of these methods and examine the size-dependence of errors in RT density propagation. We analyze the performance of RT density propagation for systems of increasing size during the application of a continuous resonant field to induce Rabi-like oscillations, during charge-transfer dynamics, and for peak shifting in simulated absorption spectra. We find that the errors in the electron dynamics are indeed size dependent for these phenomena, with the largest system producing the results most aligned with those expected from linear response theory. The results suggest that although the RT-TDHF and RT-TDDFT methods may produce severe errors for model systems, the errors in charge transfer and resonantly driven electron dynamics may be much less significant for more realistic, large-scale molecules and materials.

Chemistry↗
DOE OSTI2023

Tailoring light-induced charge transfer and intersystem crossing in FeCO using time-dependent spin–orbit configuration interaction

Real-time (RT) electronic structure methods provide a natural framework for describing light–matter interactions in arbitrary time-dependent electromagnetic fields (EMF). Optically induced excited state transitions are of particular interest, which require tuned EMF to drive population transfer to and from the specific state(s) of interest. Intersystem crossing, or spin-flip, may be driven through shaped EMF or laser pulses. These transitions can result in long-lived “spin-trapped” excited states, which are especially useful for materials requiring charge separation or protracted excited state lifetimes. Time-dependent configuration interaction (TDCI) is unique among RT methods in that it may be implemented in a basis of eigenstates, allowing for rapid propagation of the time-dependent Schrödinger equation. The recent spin–orbit TDCI (TD-SOCI) enables a real-time description of spin-flip dynamics in an arbitrary EMF and, therefore, provides an ideal framework for rational pulse design. The present study explores the mechanism of multiple spin-flip pathways for a model transition metal complex, FeCO, using shaped pulses designed to drive controlled intersystem crossing and charge transfer. These results show that extremely tunable excited state dynamics can be achieved by considering the dipole transition matrix elements between the states of interest.

Chemistry↗
DOE OSTI2024

Studies on the compositional dependent structural and electrical properties of CaTiO3-modified K0.5Na0.5NbO3 piezoelectric system

Lead-free piezoelectric ceramics of (1 − x)K0.5Na0.5NbO3-xCaTiO3 were fabricated, and their crystal structure, microstructure, and electrical properties were systematically studied. Rietveld refinement of the x-ray diffraction data and Raman spectroscopic analyses revealed a composition-dependent structural phase transition: three phase transitions, namely, from a pure orthorhombic phase for x ≤ 0.02 to a mixed phase of orthorhombic and tetragonal phases (0.03 ≤ x ≤ 0.08) and finally another mixed phase of tetragonal + cubic for x = 0.10 and 0.15 at room temperature (RT). The morphological study reveals a decrease in grain size along with a more uniform distribution of grains as the concentration of CaTiO3 (CT) increases; notably, a homogeneous distribution of grains is observed for x = 0.05. The temperature-dependent dielectric properties show two phase transitions, from orthorhombic to tetragonal (TO-T) and tetragonal to cubic (TC), for unmodified K0.5Na0.5NbO3 (KNN). However, both the phase transition temperatures (TO-T and TC) decrease, and the transition peaks broaden with an increase in CT substitution, and for x > 0.06, the TO-T shifted below RT. The broadening of the transition peak at TO-T may be due to the relaxation behavior. Among the prepared samples, the 5 mol. % CT-modified KNN shows the optimum electrical properties (d33 = 114 pC/N, ɛr = 412, and 2Pr = 15.25 μC/cm2) at RT. The enhanced electrical properties for x = 0.05 are due to the coexistence of orthorhombic and tetragonal phases, facilitating easy polarization rotation and flattening of the free energy profile. A phase diagram has been constructed based on the information gathered from the temperature-dependent dielectric measurements, RT x-ray diffraction, and Raman spectroscopy data and is discussed in detail.

Physics↗
DOE OSTI2024

Gallium oxide (Ga 2 O 3 ) energy dependent scintillation response to fast neutrons and flash gamma-rays

Gallium oxide is a newly emerged ultrawide bandgap (4.9 eV) semiconductor that is suitable as a combined electronics and radiation detection platform. We have experimentally demonstrated fast neutron and gamma-ray scintillation from Czochralski-grown β-Ga 2 O 3 in a recent series (October 2023) of experiments at the unmoderated pulsed neutron spallation source located at the Los Alamos Neutron Science Center. Using the neutron time-of-flight (TOF) technique and a fast-gated intensified CCD camera, we observed energy-dependent neutron scintillation for neutron energies ranging from 1 to 400 MeV, including the 14.1 MeV neutron energy relevant to D–T fusion. Neutron flux is quantified and calibrated by cascading the scintillator after the fission chamber, enabling a detailed analysis of temporal and energy-dependent characteristics of the scintillation events. Further, a pronounced scintillation signal from the spallation gamma flash with a temporal full width of half maximum of ~4 ns is indicative of the material’s rapid response. Neutron energy dependent scintillation is observed using the TOF method at a 22.6-m distance from the neutron source. These results highlight the possibility of developing a Ga 2 O 3 based fusion neutron diagnostic platform integrated with both scintillation and electronics functions on the integrated chip scale.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Field-dependent carrier transport in implanted isolation region of GaN lateral power devices

Among GaN lateral power devices, with proper E-field management, the breakdown occurs in the device isolation region rather than the active region. In this paper, we investigate field-dependent carrier transport in the isolation structures. Isolation test structures with variations in buffer doping, un-intentionally doped (UID) GaN thickness, and implantation conditions were fabricated. Electrical characterization was performed over a wide range of voltage and temperature. With varying UID GaN thickness and buffer doping, the leakage current and breakdown characteristics remain the same for a specific implantation condition, indicating that the leakage conduction and breakdown are governed by the implanted GaN region. Analysis of the temperature-dependent I–V reveals that carrier transport in the implanted GaN can be well explained by hopping conduction, involving three distinctive regions of operation depending on the E-field. At low E-field, carrier transport is ohmic, consistent with variable range hopping, driven by thermal activation. At medium E-field, a field enhanced thermally activated hopping is observed, following σ ∼ σ(T)exp(E). At high E-field, activation-less hopping is visible, following σ ∼ exp(−1/E), which occurs above a critical E-field limited by localization length.

Sadek, Mansura (ORCID:0000000322588338)↗
DOE OSTI2020

Evaluation of a concerted vs. sequential oxygen activation mechanism in α-ketoglutarate–dependent nonheme ferrous enzymes

Determining the requirements for efficient oxygen (O 2 ) activation is key to understanding how enzymes maintain efficacy and mitigate unproductive, often detrimental reactivity. For the α-ketoglutarate (αKG)–dependent nonheme iron enzymes, both a concerted mechanism (both cofactor and substrate binding prior to reaction with O 2 ) and a sequential mechanism (cofactor binding and reaction with O 2 precede substrate binding) have been proposed. Deacetoxycephalosporin C synthase (DAOCS) is an αKG-dependent nonheme iron enzyme for which both of these mechanisms have been invoked to generate an intermediate that catalyzes oxidative ring expansion of penicillin substrates in cephalosporin biosynthesis. Interestingly, spectroscopy shows that, in contrast to other αKG-dependent enzymes (which are six coordinate when only αKG is bound to the Fe II ), αKG binding to Fe II -DAOCS results in ~45% five-coordinate sites that selectively react with O 2 relative to the remaining six-coordinate sites. However, this reaction produces an Fe III species that does not catalyze productive ring expansion. Alternatively, simultaneous αKG and substrate binding to Fe II -DAOCS produces five-coordinate sites that rapidly react with O 2 to form an Fe IV =O intermediate that then reacts with substrate to produce cephalosporin product. These results demonstrate that the concerted mechanism is operative in DAOCS and by extension, other nonheme iron enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Determining the hydronium pKα at platinum surfaces and the effect on pH-dependent hydrogen evolution reaction kinetics

Electrocatalytic hydrogen evolution reaction (HER) is critical for green hydrogen generation and exhibits distinct pH-dependent kinetics that have been elusive to understand. A molecular-level understanding of the electrochemical interfaces is essential for developing more efficient electrochemical processes. Here we exploit an exclusively surface-specific electrical transport spectroscopy (ETS) approach to probe the Pt-surface water protonation status and experimentally determine the surface hydronium pK a = 4.3. Quantum mechanics (QM) and reactive dynamics using a reactive force field (ReaxFF) molecular dynamics (RMD) calculations confirm the enrichment of hydroniums (H 3 O + * ) near Pt surface and predict a surface hydronium pK a of 2.5 to 4.4, corroborating the experimental results. Importantly, the observed Pt-surface hydronium pK a correlates well with the pH-dependent HER kinetics, with the protonated surface state at lower pH favoring fast Tafel kinetics with a Tafel slope of 30 mV per decade and the deprotonated surface state at higher pH following Volmer-step limited kinetics with a much higher Tafel slope of 120 mV per decade, offering a robust and precise interpretation of the pH-dependent HER kinetics. These insights may help design improved electrocatalysts for renewable energy conversion.

Zhong, Guangyan↗
DOE OSTI2025

Rippled metamaterials with scale-dependent tailorable elasticity

Thermally induced ripples are intrinsic features of nanometer-thick films, atomically thin materials, and cell membranes, significantly affecting their elastic properties. Despite decades of theoretical studies on the mechanics of suspended thermalized sheets, controversy still exists over the impact of these ripples, with conflicting predictions about whether elasticity is scale-dependent or scale-independent. Experimental progress has been hindered so far by the inability to have a platform capable of fully isolating and characterizing the effects of ripples. This knowledge gap limits the fundamental understanding of thin materials and their practical applications. Here, we show that thermal-like static ripples shape thin films into a class of metamaterials with scale-dependent, customizable elasticity. Utilizing a scalable semiconductor manufacturing process, we engineered nanometer-thick films with precisely controlled frozen random ripples, resembling snapshots of thermally fluctuating membranes. Resonant frequency measurements of rippled cantilevers reveal that random ripples effectively renormalize and enhance the average bending rigidity and sample-to-sample variations in a scale-dependent manner, consistent with recent theoretical estimations. The predictive power of the theoretical model, combined with the scalability of the fabrication process, was further exploited to create kirigami architectures with tailored bending rigidity and mechanical metamaterials with delayed buckling instability.

Applied Physical Sciences↗
DOE OSTI2024

Gut enterotype-dependent modulation of gut microbiota and their metabolism in response to xanthohumol supplementation in healthy adults

Xanthohumol (XN), a polyphenol found in the hop plant (Humulus lupulus), has antioxidant, anti-inflammatory, prebiotic, and anti-hyperlipidemic activity. Preclinical evidence suggests the gut microbiome is essential in mediating these bioactivities; however, relatively little is known about XN’s impact on human gut microbiota in vivo. We conducted a randomized, triple-blinded, placebo-controlled clinical trial (ClinicalTrials.gov NCT03735420) to determine safety and tolerability of XN in healthy adults. Thirty healthy participants were randomized to 24 mg/day XN or placebo for 8 weeks. As secondary outcomes, quantification of bacterial metabolites and 16S rRNA gene sequencing were utilized to explore the relationships between XN supplementation, gut microbiota, and biomarkers of gut health. Although XN did not significantly change gut microbiota composition, it did re-shape individual taxa in an enterotype-dependent manner. High levels of inter-individual variation in metabolic profiles and bioavailability of XN metabolites were observed. Moreover, reductions in microbiota-derived bile acid metabolism were observed, which were enterotype-dependent. These results suggest interactions between XN and gut microbiota in healthy adults are highly inter-individualized and potentially indicate that XN elicits effects on gut health in an enterotype-dependent manner.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

One-Dimensional Models for Time-Dependent Transport in Solid Cylinders

We present a set of 1-D transport models for solid cylinders of material irradiated with particles on the axial ends. The models are based on 1-D models originally developed for evacuated ducts with reflecting walls. The goal of this work is to show that 1-D models can be used for time-dependent transport in solid cylinders. A future use of this approach will apply these models to the high-energy density physics problem of a Marshak wave propagating down a cylindrical foam or other experiments. The models we present use a Galerkin procedure to project the radial dependence of the 3-D transport equation onto an expansion in terms of polynomials. Results demonstrate that for steady state problems with low scattering ratios, a three-basis function expansion can adequately capture the 3-D solution as computed via Monte Carlo. Smaller number of basis functions did not result in adequate solutions. As the radius of the cylinder increases, the 1-D model is more effective. Results from time dependent problems indicate that the 1-D models move particles too fast down the cylinder at early times, but are accurate on the order of 10 or more mean-free times. Here, our results indicate that 1-D models may be effective in modeling 2-D Marshak waves, but further work is necessary to answer this question.

42 ENGINEERING↗
DOE OSTI2017

Stress-dependence of kinetic transitions at atomistic defects

We report the full second-rank activation volume tensors associated with vacancy migration in FCC copper and HCP titanium as well as transition events in the Σ5 (2 1 0) grain boundary in copper are calculated and analyzed. The full tensorial results quantitatively illustrate how the conventional use of an activation volume scalar in atomistic studies of the kinetic processes of complex defects can miss important stress dependencies, in that neither hydrostatic pressure nor deviatoric stress dependencies can be considered alone as dominating the response. The results speak to the importance of anisotropies in the stress-dependence of atomistic kinetics, including crystal structure anisotropy, elastic anisotropy, and defect structure or migration-path anisotropies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Orbit-modulated transport and sources in time-dependent plasmas

The orbit-modulation framework for steady-state ion-orbit boundary fluxes is reformulated to apply to time-dependent plasmas. The new formulation can quantify the extent to which orbit fluxes are affected by the time dependence of the distribution function, and may be applied both to time-dependent physical scenarios and to computationally expensive simulations that are unable to reach a true steady state. As the system tends to a time-independent state, the orbit-loss fluxes approach their steady-state values, which are determined entirely by upstream transport (turbulent and collisional) and upstream sources and sinks. This result holds for the fluxes of any moments that are expressible in terms of the invariants that determine the orbits, including parallel toroidal angular momentum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗