Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRAFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

ILC Reference Design And Challenges

The International Linear Collider (ILC) is a 500 GeV center-of-mass electron-positron linear collider based on 1.3 GHz superconducting rf. For the past two years, the ILC design has been developed by an international collaboration, the Global Design Effort. A draft Reference Design Report (RDR) for the ILC was released in February 2007 and, after international review, the final draft will be published in mid-July, 2007. This talk will describe the ILC design along with the outstanding R&D and engineering challenges. The next step is to complete an Engineering Design (EDR) by 2010, and plans for this phase will also be discussed.

43 PARTICLE ACCELERATORS↗

Terrestrial Biological Carbon Sequestration: Science for Enhancement and Implementation

Fossil-fuel combustion and land-use change have elevated atmospheric CO2 concentrations from 280 ppmv at the beginning of the industrial era to more than 381 ppmv in 2006. Carbon dioxide emissions from fossil fuels and cement rose 71% during 1970–2000 to a rate of 7.0 PgC/y (1). Canadell et al. (2) estimated that CO2 emissions rose at a rate at 1.3% per year during 1990–1999, but since 2000 it has been growing at 3.3% per year. Emissions reached 8.4 PgC/y in 2006. It is likely that the current 2-ppm annual increase will accelerate as the global economy expands, increasing the risk of climate system impacts. There is good agreement that photosynthetic CO2 capture from the atmosphere and storage of the C in above- and belowground biomass and in soil organic and inorganic forms could be exploited for safe and affordable greenhouse gas (GHG) mitigation (3). Nevertheless, C sequestration in the terrestrial biosphere has been a source of contention before and since the drafting of the Kyoto Protocol in 1997. Concerns have been raised that C sequestration in the biosphere is not permanent, that it is difficult to measure and monitor, that there would be “carbon leakage” outside of the mitigation activity, and that any attention paid to environmental sequestration would be a distraction from the central issue of reducing GHG emissions from energy production and use. A decade after drafting the Kyoto Protocol, it is clear that international accord and success in reducing emissions from the energy system are not coming easily and concerns about climate change are growing. It is time to re-evaluate all available options that might not be permanent yet have the potential to buy time, bridging to a future when new energy system technologies and a transformed energy infrastructure can fully address the climate challenge. Terrestrial sequestration is one option large enough to make a contribution in the coming decades using proven land-management methods and with the possibility that new technologies could significantly enhance the opportunity. Here we review progress on key scientific, economic, and social issues; postulate the extent to which new technologies might significantly enhance terrestrial sequestration potential; and address remaining research needs.

Post, W M↗

Paenibacillus aquistagni sp. nov., isolated from an artificial lake accumulating industrial wastewater

Strain 11 T was isolated from water of an artificial lake accumulating industrial wastewater on the outskirts of Celje, Slovenia. In this paper, phenotypic characterisation showed strain 11 T to be a Gram-stain positive, spore forming bacterium. The 16S rRNA gene sequence identified strain 11 T as a member of the genus Paenibacillus, closely related to Paenibacillus alvei (96.2%). Genomic similarity with P. alvei 29 T was 73.1% (gANI), 70.2% (ANIb), 86.7% (ANIm) and 21.7 ± 2.3% (GGDC). The DNA G+C content of strain 11 T was determined to be 47.5%. The predominant menaquinone of strain 11 T was identified as MK-7 and the major fatty acid as anteiso-C 15:0 . The peptidoglycan was found to contain meso-diaminopimelic acid. In contrast to its close relatives P. alvei DSM 29 T , Paenibacillus apiarius DSM 5581 T and Paenibacillus profundus NRIC 0885 T , strain 11 T was found to be able to ferment d-fructose, d-mannose and d-xylose. A draft genome of strain 11 T contains a cluster of genes associated with type IV pilin synthesis usually found in clostridia, and only sporadically in other Gram-positive bacteria. Finally, genotypic, chemotaxonomic, physiological and biochemical characteristics of strain 11 T presented in this study support the creation of a novel species within the genus Paenibacillus, for which the name Paenibacillus aquistagni sp. nov. is proposed, with strain 11 T (=ZIM B1027 T =LMG 29561 T =CCM 8679 T ) as the type strain.

54 ENVIRONMENTAL SCIENCES↗

Sea-ice thickness from field measurements in the northwestern Barents Sea: SEA-ICE THICKNESS, NW BARENTS SEA

The Barents Sea is one of the fastest changing regions of the Arctic, and has experienced the strongest decline in winter-time sea-ice area in the Arctic, at 22364% decade21. Sea-ice thickness in the Barents Sea is not well studied. We present two previously unpublished helicopter-borne electromagnetic(HEM) ice thickness measurements from the northwestern Barents Sea acquired in March 2003 and 2014.The HEM data are compared to ice thickness calculated from ice draft measured by ULS deployed between1994 and 1996. These data show that ice thickness varies greatly from year to year; influenced by the thermodynamic and dynamic processes that govern local formation vs long-range advection. In a year with a large inflow of sea-ice from the Arctic Basin, the Barents Sea ice cover is dominated by thick multiyear ice;as was the case in 2003 and 1995. In a year with an ice cover that was mainly grown in situ, the ice will be thin and mechanically unstable; as was the case in 2014. The HEM data allow us to explore the spatial and temporal variability in ice thickness. In 2003 the dominant ice class was more than 2 years old; and modal sea-ice thickness varied regionally from 0.6 to 1.4 m, with the thinner ice being either irst-year ice, or multiyear ice which had come into contact with warm Atlantic water. In 2014 the ice cover was predominantly locally grown ice less than 1 month old (regional modes of 0.5–0.8 m). These two situations represent two extremes of a range of possible ice thickness distributions that can present very different conditions for shipping traffic; or have a different impact on heat transport from ocean to atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Instability and treatments of the coupled discrete element and lattice Boltzmann method by the immersed moving boundary scheme

The immersed moving boundary (IMB) scheme has been extensively used to couple the discrete element method (DEM) with the lattice Boltzmann method (LBM). In the literature, only the formulation of IMB for lattice nodal cells covered by a single-solid particle was given. The treatment of situations where a nodal cell is covered by two or more solid particles is seldom discussed. It is found that some numerical instability can occur for such situations due to an inappropriate computation of the weighting function in the IMB formulation. This work presents an enhanced treatment that can resolve the issue and validates it using some benchmark tests. Furthermore, to avoid the extra costs associated with the treatment and simplify the complicated procedure introduced, a simplified IMB scheme is proposed. The accuracy of both enhanced and simplified IMB schemes are validated by test cases including single-particle sedimentation, two-particle drafting-kissing-tumbling phenomenon, and multiple-particle sedimentation. Then, the robustness of both schemes is examined and discussed using a specially designed flow past cylinders test. Overall, the simplified IMB scheme is proved to be robust and sufficiently accurate and simpler and more effective than the enhanced scheme.

42 ENGINEERING↗

Evaluation of the DC bus link capacitors and power transistor modules in the qualification testing of PV inverters

To achieve useful, fair, and cost-effective design qualification and type approval testing for PV inverters, two procedures were developed and demonstrated to evaluate the bus link capacitors and power transistor—and where applicable, its module—for long-term reliability. We evaluate the inverter under simulated use conditions with heat run tests to find the highest operating temperatures reached by these components. The procedures are demonstrated in this study with a 4-kVA class string inverter. The maximum temperature of the DC bus link capacitors was determined to be 76.4°C when the ambient temperature was at the inverter's maximum rated temperature of 60°C with derating occurring. On the other hand, the power transistor module's maximum temperature using the heat sink temperature as the index, 92.6°C, occurred in an ambient of 40.8°C when derating was not occurring. The conditions found for upper temperatures exhibited by these components are, respectively, proposed for implementation in the dry heat and thermal cycling tests in the IEC 62093 “Power conversion equipment for photovoltaic systems – Design qualification testing” international standard draft so that the levels applied in the tests are in proportion to those experienced in the field. Finally as a result, fairer evaluation of inverter reliability is realized.

14 SOLAR ENERGY↗

Factors affecting stranding of juvenile salmonids by wakes from ship passage in the Lower Columbia River

The effects of deep-draft vessel traffic in confined riverine channels on shorelines and fish are of widespread concern. In the Pacific Northwest of the United States, wakes and subsequent beach run-up from ships transiting the Lower Columbia River have been observed to strand juvenile salmon and other fish. As part of a before-and-after study to assess stranding effects that may be associated with channel deepening, we measured 19 co-variables from observations of 126 vessel passages at three low-slope beaches and used multiple logistic regression to discern the significant factors influencing the frequency of stranding. Subyearling Chinook salmon were 82% of the fish stranded over all sites and seasons. Given a low-slope beach, stranding frequencies for juvenile salmon were significantly related to river location, salmon density in the shallows, a proxy for ship kinetic energy, tidal height, and two interactions. The beach types selected for our study do not include all the beach types along the Lower Columbia River so that the stranding probabilities described here cannot be extrapolated river-wide. A more sophisticated modeling effort, informed by additional field data, is needed to assess salmon losses by stranding for the entire lower river. Such modeling needs to include river-scale factors such as beach type, berms, proximity to navigation channel, and perhaps, proximity to tributaries that act as sources of out-migrating juvenile salmon. At both river and beach scales, no one factor produces stranding; rather interactions among several conditions produce a stranding event and give stranding its episodic nature.

54 ENVIRONMENTAL SCIENCES↗

Assembly and comparative genome analysis of a Patagonian Aureobasidium pullulans isolate reveals unexpected intraspecific variation

Aureobasidium pullulans is a yeast-like fungus with remarkable phenotypic plasticity widely studied for its importance for the pharmaceutical and food industries. So far, genomic studies with strains from all over the world suggest they constitute a genetically unstructured population, with no association by habitat. However, the mechanisms by which this genome supports so many phenotypic permutations are still poorly understood. Recent works have shown the importance of sequencing yeast genomes from extreme environments to increase the repertoire of phenotypic diversity of unconventional yeasts. In this study, we present the genomic draft of A. pullulans strain from a Patagonian yeast diversity hotspot, re-evaluate its taxonomic classification based on taxogenomic approaches, and annotate its genome with high-depth transcriptomic data. Here, our analysis suggests this isolate could be considered a novel variant at an early stage of the speciation process. The discovery of divergent strains in a genomically homogeneous group, such as A. pullulans, can be valuable in understanding the evolution of the species. The identification and characterization of new variants will not only allow finding unique traits of biotechnological importance, but also optimize the choice of strains whose phenotypes will be characterized, providing new elements to explore questions about plasticity and adaptation.

59 BASIC BIOLOGICAL SCIENCES↗

Numerical Simulation and Validation of Gas and Molten Metal Flows in Close-Coupled Gas Atomization

Molten metal atomization in close-coupled gas atomization dies can operate between two limiting conditions, jetting and filming, together with several complex mechanisms: liquid-gas drafting, downward/upward shearing, melt bouncing, etc. Liquid jet deformation depends on flow and geometric parameters, such as liquid Reynolds, liquid Weber, and gas Mach numbers, as well as gas jet apex angle and melt tube tip extension and aspect ratio, among others. Understanding their effect is of importance for the metal powder making industry. Numerical gas atomization studies can provide approximated flow information and consider a wide range of conditions, beyond experimental reach. Here, 3D high-resolution simulations employing a 5-equation compressible flow model coupled with the volume-of-fluid method are compared with experiments, for liquid Weber number in the range of 1–30 and liquid Reynolds number below 10,000. This validation explores the predicting capabilities of the numerical model.

Hernandez, F.↗

Addressing Regulatory Challenges to Tribal Solar Deployment: Preprint

Although Tribal land represents more than 5% of the solar photovoltaic technical potential in the United States, this resource is largely untapped due to a range of barriers, including complex project economics, Tribal technical and human resource capacity, project funding and financing obstacles, and regulatory challenges. To identify and better understand the regulatory barriers, the National Renewable Energy Laboratory (NREL) and the Midwest Tribal Energy Resources Association (MTERA) engaged Tribes, utilities, and regulators. Funded by the U.S. Department of Energy, the 3-year effort seeks to address regulatory challenges or barriers that affect Tribal solar projects differently - specifically or disproportionately because they are located on Tribal lands. This paper, largely excerpted from a comprehensive (draft) guidebook released by NREL and MTERA, provides an overview of 13 key regulatory barriers identified through this research, as well as potential short- and long-term solutions. In addition, the paper points to potential pathways for addressing key barriers through case studies highlighting successful Tribal solar projects along with considerations for stakeholders working with Tribes. These resources can support stakeholders in creating meaningful relationships and pursuing workable solar projects.

ENERGY PLANNING, POLICY, AND ECONOMY,SOLAR ENERGY↗

Automatic Digitization and Orientation of Scanned Mesh Data for Floor Plan and 3D Model Generation

This paper describes a novel approach for generating accurate floor plans and 3D models of building interiors using scanned mesh data. Unlike previous methods, which begin with a high resolution point cloud from a laser range-finder, our approach begins with triangle mesh data, as from a Microsoft HoloLens. It generates two types of floor plans, a “pen-and-ink” style that preserves details and a drafting-style that reduces clutter. It processes the 3D model for use in applications by aligning it with coordinate axes, annotating important objects, dividing it into stories, and removing the ceiling. Its performance is evaluated on commercial and residential buildings, with experiments to assess quality and dimensional accuracy. Our approach demonstrates promising potential for automatic digitization and orientation of scanned mesh data, enabling floor plan and 3D model generation in various applications such as navigation, interior design, furniture placement, facilities management, building construction, and HVAC design.

Sharma, Ritesh↗

Pseudomonas atagosis sp. nov., and Pseudomonas akappagea sp. nov., New Soil Bacteria Isolated from Samples on the Volcanic Island Izu Oshima, Tokyo

During the exploration of microbial natural resources, two strains of Pseudomonas, PS14 T and PS24 T , were isolated from samples taken from Izu Oshima, a volcanic island located 120 km southwest of central Tokyo. Phylogenetic analysis based on 16S rRNA gene sequences showed that PS14 T was most similar to Pseudomonas baetica a390T (99.6%) and Pseudomonas helmanticensis OHA11 T (99.5%), and that PS24T was most similar to Pseudomonas qingdaonensis JJ3 T (98.8%) and Pseudomonas lutea OK2 T (98.7%). The major fatty acids of these two strains were C 16:0 and C 17:0 cyclo, summed feature 3 (C 16:1 ω6c and/or C 16:1 ω7c), and summed feature 8 (C18:1 ω7c and/or 18:1 ω6c). The phylogenetic analyses, DNA-DNA hybridization results and phenotypic traits indicated that PS14 T and PS24 T constitute two novel species, Pseudomonas atagosis sp. nov. (type strain PS14 T = CECT 9940 T , = LMG 31496 T ) and Pseudomonas akappagea sp. nov. (type strain PS24T = CECT 9941T, = LMG 31497T), respectively. The sequence data of the draft genomes of PS14 T and PS24 T were deposited in the GenBank database under accession numbers VXCA00000000 and VXCP00000000, respectively, and the sequence data of their 16S rRNA genes were deposited in the GenBank database under accession numbers MN396717 and MN382268, respectively.

59 BASIC BIOLOGICAL SCIENCES↗

Insights from 20 years of bacterial genome sequencing

Since the first two complete bacterial genome sequences were published in 1995, the science of bacteria has dramatically changed. Using third-generation DNA sequencing, it is possible to completely sequence a bacterial genome in a few hours and identify some types of methylation sites along the genome as well. Sequencing of bacterial genome sequences is now a standard procedure, and the information from tens of thousands of bacterial genomes has had a major impact on our views of the bacterial world. In this review, we explore a series of questions to highlight some insights that comparative genomics has produced. To date, there are genome sequences available from 50 different bacterial phyla and 11 different archaeal phyla. However, the distribution is quite skewed towards a few phyla that contain model organisms. But the breadth is continuing to improve, with projects dedicated to filling in less characterized taxonomic groups. The clustered regularly interspaced short palindromic repeats (CRISPR)-Cas system provides bacteria with immunity against viruses, which outnumber bacteria by tenfold. How fast can we go? Second-generation sequencing has produced a large number of draft genomes (close to 90 % of bacterial genomes in GenBank are currently not complete); third-generation sequencing can potentially produce a finished genome in a few hours, and at the same time provide methlylation sites along the entire chromosome. The diversity of bacterial communities is extensive as is evident from the genome sequences available from 50 different bacterial phyla and 11 different archaeal phyla. Genome sequencing can help in classifying an organism, and in the case where multiple genomes of the same species are available, it is possible to calculate the pan- and core genomes; comparison of more than 2000 Escherichia coli genomes finds an E. coli core genome of about 3100 gene families and a total of about 89,000 different gene families. Why do we care about bacterial genome sequencing? There are many practical applications, such as genome-scale metabolic modeling, biosurveillance, bioforensics, and infectious disease epidemiology. In the near future, high-throughput sequencing of patient metagenomic samples could revolutionize medicine in terms of speed and accuracy of finding pathogens and knowing how to treat them.

59 BASIC BIOLOGICAL SCIENCES↗

Trading permanent and temporary carbon emissions credits

In this issue of Climatic Change, Van Kooten (2009) addresses an issue that has bedeviled negotiators since the drafting stage of the Kyoto Protocol. If we accept that increasing withdrawals of carbon dioxide from the atmpshere has the same net impact on the climate system as reducing emissions of carbon dioxide to the atmosphere, how do we design a system that allows trading of one for the other? As van Kooten expresses the challenge: 'The problem is that emissions reduction and carbon sequestration, while opposite sides of the same coin in some sense, are not directly comparable, thereby inhibiting their trade in carbon markets.' He explains: 'The difficulty centers on the length of time that mitigation strategies without CO{sub 2} from entering the atmosphere - the duration problem.' While reducing emissions of CO{sub 2} represents an essentially permanent benefit for the atmosphere, capturing CO{sub 2} that has been produced (whether capture is from the atmosphere or directly from, for example, the exhaust from power plants) there is the challenge of storing the carbon adn the risk that it will yet escape to the atmosphere. Permanent benefit to the atmosphere is often not assured for carbon sequestration activities. This is especially true if the carbon is taken up and stored in the biosphere - e.g. in forest trees or agricultural soils.

54 ENVIRONMENTAL SCIENCES↗

The obscure events contributing to the evolution of an incipient sex chromosome in Populus A retrospective working hypothesis.

Genetic determination of gender is a fundamental developmental and evolutionary process in plants. Although it appears that dioecy in Populus is partially genetically controlled, the precise gender-determining systems remain unclear. The recently-released second draft assembly and annotated gene set of the Populus genome provided an opportunity to re-visit this topic. We hypothesized that over evolutionary time, selective pressure has reformed the genome structure and gene composition in the peritelomeric region of the chromosome XIX which has resulted in a distinctive genome structure and cluster of genes contributing to gender determination in Populus. Multiple lines of evidence support this working hypothesis. First, the peritelomeric region of the chromosome XIX contains significantly fewer single nucleotide polymorphisms than the rest of Populus genome and has a distinct evolutionary history. Second, the peritelomeric end of chromosome XIX contains the largest cluster of the nucleotide-binding site-leucine-rich repeat (NBS-LRR) class of disease resistances genes in the entire Populus genome. Third, there is a high occurrence of small microRNAs on chromosome XIX coincident to the region containing the putative gender-determining locus and the major cluster of NBS-LRR genes. Further, by analyzing the metabolomic profiles of floral bud in male and female Populus trees using a gas chromatography-mass spectrometry, we found there are gender-specific accumulations of phenolic glycosides. Taken together, these findings provide new insights into the genetic control of gender determination in Populus.

59 BASIC BIOLOGICAL SCIENCES↗

A Skyline Plugin for Pathway-Centric Data Browsing

For targeted proteomics to be broadly adopted in biological laboratories as a routine experimental protocol, wet-bench biologists must be able to approach SRM assay design in the same way they approach biological experimental design. Most often, biological hypotheses are envisioned in a set of protein interactions, networks and pathways. We present a plugin for the popular Skyline tool that presents public mass spectrometry data in a pathway-centric view to assist users in browsing available data and determining how to design quantitative experiments. Selected proteins and their underlying mass spectra are imported to Skyline for further assay design (transition selection). The same plugin can be used for hypothesis-drive DIA data analysis, again utilizing the pathway view to help narrow down the set of proteins which will be investigated. The plugin is backed by the PNNL Biodiversity Library, a corpus of 3 million peptides from >100 organisms, and the draft human proteome. Users can upload personal data to the plugin to use the pathway navigation prior to importing their own data into Skyline.

59 BASIC BIOLOGICAL SCIENCES↗

Knowledge-matching based computational framework for genome-scale metabolic model refinement

Genome-scale metabolic models (GEMs) are mathematically structured knowledge base reconstructed from annotated genome of different organisms. With the advancement of next-generation sequencing technology, many organisms have had their genomes sequenced. However, obtaining a high-quality GEM is highly time-consuming, even with the introduction of several genome-scale reconstruction tools that offer automated draft network generation and gap filling. It has been recognized that the iterative process of manual curation and refinement is the limiting step of GEM development, and how to expedite the GEM refinement is still an open question. As cellular metabolism is a complex system with very high degree of freedom and redundancy, the principles and techniques developed in process systems engineering can be adapted to expedite GEM refinement. In this paper we present a knowledge-matching based computation framework for GEM refinement, and demonstrate the effectiveness of the proposed solution using the refinement of a GEM for Clostridium tyrobutyricum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous elasticity, fluctuations and disorder in elastic membranes

Motivated by freely suspended graphene and polymerized membranes in soft and biological matter we present a detailed study of a tensionless elastic sheet in the presence of thermal fluctuations and quenched disorder. The manuscript is based on an extensive draft dating back to 1993, that was circulated privately. It presents the general theoretical framework and calculational details of numerous results, partial forms of which have been published in brief Letters (Le Doussal and Radzihovsky, 1992; 1993). The experimental realization atom-thin graphene sheets (Novoselov et al., 2004) have driven a resurgence in this fascinating subject, making our dated predictions and their detailed derivations timely. To this end we analyze the statistical mechanics of a generalized D-dimensional elastic “membrane” embedded in d dimensions using a self-consistent screening approximation (SCSA), that has proved to be unprecedentedly accurate in this system, exact in three complementary limits: (i) d→∞, (ii) D→4, and (iii) D=d. Focusing on the critical “flat” phase, for a homogeneous two-dimensional (D=2) membrane embedded in three dimensions (d=3), we predict its universal roughness exponent ζ=0.590, length-scale dependent elastic moduli exponents η=0.821 and η{sub u}=0.358, and an anomalous Poisson ratio, σ = - 1/3. In the presence of random uncorrelated heterogeneity the membrane exhibits a glassy wrinkled ground state, characterized by ζ'=0.775,η' = 0.449,η{sub u}'=1.101 and a Poisson ratio σ ' = - 1/3. Motivated by a number of physical realizations (charged impurities, disclinations and dislocations) we also study power-law correlated quenched disorder that leads to a variety of distinct glassy wrinkled phases. Finally, neglecting self-avoiding interaction we demonstrate that at high temperature a “phantom” sheet undergoes a continuous crumpling transition, characterized by a radius of gyration exponent, ν=0.732 and η=0.535. Many of these universal predictions have received considerable support from simulations. We hope that this detailed presentation of the SCSA theory will be useful to further theoretical developments and corresponding experimental investigations on freely suspended graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗