Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

How Dynamic Time Warping Can Assist Conventional Cross-correlation

Waveform cross-correlation is a sensitive phase-matched filtering technique that can detect seismic events for nuclear explosion monitoring. However, there are outstanding challenges with correlation detectors, most notably a direct dependence on the completeness of the waveform template library. To ameliorate these challenges, we investigate how dynamic time warping (DTW) may make waveform correlation more robust. DTW analyzes the differences between two time series and attempts to “warp” one time series relative to another in a recursive manner. We apply DTW to synthetic earthquake and recorded explosion templates to expand the capability of correlation detectors. We explore what conditions (e.g., source, station distance, frequency bands) and/or DTW algorithms generate stronger correlation scores. We show that DTW performs well on noisy signals and can dramatically improve the cross-correlation coefficient between a template and data-stream waveform. We conclude with recommendations on how to utilize DTW in nuclear monitoring detection.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Wind Speed Prediction with Spatio–Temporal Correlation: A Deep Learning Approach

Wind speed prediction with spatio–temporal correlation is among the most challenging tasks in wind speed prediction. In this paper, the problem of predicting wind speed for multiple sites simultaneously is investigated by using spatio–temporal correlation. This paper proposes a model for wind speed prediction with spatio–temporal correlation, i.e., the predictive deep convolutional neural network (PDCNN). The model is a unified framework, integrating convolutional neural networks (CNNs) and a multi-layer perceptron (MLP). Firstly, the spatial features are extracted by CNNs located at the bottom of the model. Then, the temporal dependencies among these extracted spatial features are captured by the MLP. In this way, the spatial and temporal correlations are captured by PDCNN intrinsically. Finally, PDCNN generates the predicted wind speed by using the learnt spatio–temporal correlations. In addition, three error indices are defined to evaluate the prediction accuracy of the model on the wind turbine array. Experiment results on real-world data show that PDCNN can capture the spatio–temporal correlation effectively, and it outperforms the conventional machine learning models, including multi-layer perceptron, support vector regressor, decision tree, etc.

17 WIND ENERGY↗

The Intrinsic Scatter of the Broad Lines–Narrow Line Correlation in Type I AGN

A correlation between the FWHM of the broad Balmer lines and the narrow [O iii]/H{sub β} line ratio was recently applied to the black hole (BH) mass estimation in type II active galactic nuclei (AGN), where only the narrow lines are visible to the observer. The correlation was initially quantified with type I AGN using stacked spectra, in groups automatically created using a machine-learning algorithm. Such an analysis does not provide information about the intrinsic scatter of the correlation. In addition, it does not necessarily reproduce the true underlying correlation, for example, due to the stacking of spectra with different properties. Testing these two issues requires measurements of individual objects. In this work, we perform such a test by fitting the broad and narrow lines for 8302 type I AGN from the Sloan Digital Sky Survey. Due to the difficulty in reliably measuring the narrow Balmer lines in such objects, which are, in many cases, a small contribution on top of the broad lines, we visually inspect all of the fits and identify 1561 objects with robust measurements. Using these measurements, we find that while a correlation does exist, it shows a large scatter and is not well described by a linear relation. This should be taken into account when using the broad H{sub β} FWHM versus narrow [O iii]/H{sub β} correlation for type II AGN BH mass estimation.

79 ASTRONOMY AND ASTROPHYSICS↗

The Atacama Cosmology Telescope: Cosmology from Cross-correlations of unWISE Galaxies and ACT DR6 CMB Lensing

We present tomographic measurements of structure growth using cross-correlations of Atacama Cosmology Telescope (ACT) DR6 and Planck cosmic microwave background (CMB) lensing maps with the unWISE Blue and Green galaxy samples, which span the redshift ranges 0.2 ≲ z ≲ 1.1 and 0.3 ≲ z ≲ 1.8, respectively. We improve on prior unWISE cross-correlations not just by making use of the new, high-precision ACT DR6 lensing maps, but also by including additional spectroscopic data for redshift calibration and by analyzing our measurements with a more flexible theoretical model. We determine the amplitude of matter fluctuations at low redshifts (z ≃ 0.2–1.6), finding S 8 ≡ σ 8 (Ω m /0.3) 0.5 = 0.813 ± 0.021 using the ACT cross-correlation alone and S 8 = 0.810 ± 0.015 with a combination of Planck and ACT cross-correlations; these measurements are fully consistent with the predictions from primary CMB measurements assuming standard structure growth. The addition of baryon acoustic oscillation data breaks the degeneracy between σ 8 and Ω m , allowing us to measure σ 8 = 0.813 ± 0.020 from the cross-correlation of unWISE with ACT and σ 8 = 0.813 ± 0.015 from the combination of cross-correlations with ACT and Planck. These results also agree with the expectations from primary CMB extrapolations in ΛCDM cosmology; the consistency of σ 8 derived from our two redshift samples at z ∼ 0.6 and 1.1 provides a further check of our cosmological model. Our results suggest that structure formation on linear scales is well described by ΛCDM even down to low redshifts z ≲ 1.

79 ASTRONOMY AND ASTROPHYSICS↗

Can the Distance–Redshift Relation be Determined from Correlations between Luminosities?

We explore whether an independent determination of the distance–redshift relation, and hence cosmological model parameters, can be obtained from the apparent correlations between two different wave-band luminosities or fluxes, as has been claimed in recent works using the X-ray and ultraviolet luminosities and fluxes of quasars. We show that such an independent determination is possible only if the correlation between luminosities is obtained independently of the cosmological model and measured fluxes and redshifts, for example, based on sound theoretical models or unrelated observations. In particular, we show that if the correlation is determined empirically for two luminosities obtained from fluxes and redshifts, then the method suffers from circularity. In the case where the observed correlation between fluxes in very narrow redshift bins is used as a proxy for the luminosity correlation, we show that one is dealing with a pure tautology with no information on distances and cosmological model. We argue that the problem arises because of the incomplete treatment of the correlation, and we use numerical methods with a joint X-ray and ultraviolet quasar data set to demonstrate this shortcoming.

79 ASTRONOMY AND ASTROPHYSICS↗

The effects of correlation on goodness of fit

Autocorrelated normal random variates were generated via computer and the effects of various levels of correlation on goodness of fit problems were studied. The results are useful in determining the distribution or estimating the parameters of populations that correlate observations such as wind speeds and temperature. The model used to generate the autocorrelated data is an autoregressive process of order 1. The Kolmogorov-Smirnov and chi-square statistics are used in the analysis. It was observed in the simulation that high positive correlations tend to shift the sample mean away from the population mean and negative correlations tend to shift the sample mean towards the population mean. In many cases, it was observed that positive and negative correlations tend to decrease the standard deviation. However, since this did not occur in all cases, no definite conclusion can be made regarding the standard deviation. Since the autoregressive process is a linear transformation, it is not surprising that normality was preserved. However, a possible extension of this problem could be to generate non-normal data and observe how the distribution is affected by correlation. Another extension might utilize another model such as autoregressive of order k or a moving average process of order k.

Kitchens, L. J.↗

Optimum wall impedance for spinning modes - A correlation with mode cut-off ratio

A correlating equation relating the optimum acoustic impedance for the wall lining of a circular duct to the acoustic mode cut-off ratio is presented and compared to exact calculations. The optimum impedance was correlated with cut-off ratio because the cut-off ratio appears to be the fundamental parameter governing the propagation of sound in the duct. Modes with similar cut-off ratios respond in a similar way to the acoustic liner. The correlating equation is useful for the design of suppressors for aircraft engine inlets having a steady mean flow with a boundary layer and spinning mode noise source excitation. The correlation is a semi-empirical expression developed from an empirical modification of an equation originally derived from sound propagation theory in a thin boundary layer. Exact calculations of the optimum wall impedance were made over a wide range of frequency parameters, boundary layer thicknesses and flow Mach numbers to develop and verify the correlation. This correlating equation represents a part of a simplified liner design method, based upon modal cut-off ratio, for multimodal noise propagation.

Rice, E. J.↗

Correlation of Preston-tube data with laminar skin friction (Log No. J12984)

Preston tube data within laminar boundary layers obtained on a sharp ten-degree cone in the NASA Ames eleven-foot transonic wind tunnel are correlated with the corresponding values of theoretical skin friction. Data were obtained over a Mach number range of 0.30 to 0.95 and unit Reynolds numbers of 9.84, 13.1, and 16.4 million per meter. The rms scatter of skin friction coefficient about the correlation is of the order of one percent, which is comparable to the reported accuracy for calibrations of Preston tubes in incompressible pipe flows. In contrast to previous works on Preston tube/skin friction correlations, which are based on the physical height of the probe's face, this satisfactory correlation for compressible boundary layer flows is achieved by accounting for the effects of a variable "effective" height of the probe. The coefficients, which appear in the correlation, are dependent on the particular tunnel environment. The general procedure can be used to define correlations for other wind tunnels.

Reed, T. D.↗

Correlation of Preston-tube data with laminar skin friction

Preston-tube data have been obtained on a sharp ten-degree cone in the NASA Ames Eleven-Foot Transonic Wind Tunnel. Data were obtained over a Mach number range of 0.30 to 0.95 and unit Reynolds numbers of 9.84, 13.1, and 16.4 million per meter. The portions of these data, that were obtained within laminar boundary layers, have been correlated with the corresponding values of theoretical skin friction. The rms scatter of skin-friction coefficient about the correlation is of the order of one percent, which is comparable to the reported accuracy for calibrations of Preston-tubes in incompressible pipe-flows. In contrast to previous works on Preston-tube/skin-friction correlations, which are based on the physical height of the probe's face, this very satisfactory correlation for compressible boundary-layer flows is achieved by accounting for the effects of a variable 'effective' height of the probe. The coefficients, which appear in the correlation, are dependent on the particular tunnel environment. The general procedure can be used to define correlations for other wind tunnels.

Reed, T. D.↗

The spatial correlation function of rich clusters of galaxies

A series of objective statistical estimators is applied to directly study the three-dimensional distribution of rich clusters, using a recently completed redshift sample of 104 Abell clusters out to distance class four and galactic latitude of 30 deg or more. The sample and the relevant positional and redshift selection effects are discussed, and the two-point angular correlation function and nearest-neighbor distribution of clusters in the sample are determined, as well as in the larger D = 5+6 sample and in several subsamples of different richness classes and latitude zones. The redshift correlation function of clusters for various angular separations on the sky is examined as a test for the reality of the observed angular correlations. The two-point spatial correlation function of clusters in the sample is determined, and the consistency among the three observed correlation functions is tested. A model that describes all the observed correlations is presented.

Bahcall, N. A.↗

The (RH+t) aging correlation. Electrical resistivity of PVB at various temperatures and relative humidities

Electrical products having organic materials functioning as pottants, encapsulants, and insulation coatings are commonly exposed to elevated conditions of temperature and humidity. In order to assess service life potential from this method of accelerated aging, it was empirically observed that service life seems proportional to an aging correlation which is the sum of temperature in degrees Celsius (t), and the relative humidity (RH) expressed in percent. Specifically, the correlation involves a plot of time-to-failure on a log scale versus the variable RH + T plotted on a linear scale. A theoretical foundation is provided for this empirically observed correlation by pointing out that the correlation actually involves a relationship between the electrical resistivity (or conductivity) of the organic material, and the variable RH + t. If time-to-failure is a result of total number of coulombs conducted through the organic material, then the correlation of resistivity versus RH + t is synonymous with the empirical correlation of time-to-failure versus RH + t.

Cuddihy, E. F.↗

The cluster-cluster correlation function

The clustering properties of the Abell and Zwicky cluster catalogs are studied using the two-point angular and spatial correlation functions. The catalogs are divided into eight subsamples to determine the dependence of the correlation function on distance, richness, and the method of cluster identification. It is found that the Corona Borealis supercluster contributes significant power to the spatial correlation function to the Abell cluster sample with distance class of four or less. The distance-limited catalog of 152 Abell clusters, which is not greatly affected by a single system, has a spatial correlation function consistent with the power law Xi(r) = 300r exp -1.8. In both the distance class four or less and distance-limited samples the signal in the spatial correlation function is a power law detectable out to 60/h Mpc. The amplitude of Xi(r) for clusters of richness class two is about three times that for richness class one clusters. The two-point spatial correlation function is sensitive to the use of estimated redshifts.

Postman, M.↗

Correlations of TOMS total ozone data (Nimbus-7 satellite) with tropopause height

Two correlation studies of Total Ozone Mapping Spectrometer (TOMS) data with tropopause height from radiosondes performed over Europe showed a correlation coefficient of 0.94 and 0.96. As a result, the rms error in the prediction of tropopause height from total ozone was found to be 20 mb. Correlation between tropopause height and TOMS data was the highest of all the other correlations with variables directly derived from radiosondes or simulated thermal radiances over the location of radiosondes. Comparing the two dimensional fields of TOMS, tropopause height from radiosondes and tropopause height field from TIROS-N retrievals, we can say that the first field is much closer to the true field from radiosondes than the third. The correlation coefficient for a ten-day study between TOMS data and tropopause height from radiosondes is between 0.85 and 0.9 for 30-70N. Tropopause analysis provided by GLA model also shows a very high correlation with TOMS data.

Munteanu, Marie-Jeanne↗

Optical Correlation

Pattern recognition may supplement or replace certain navigational aids on spacecraft in docking or landing activities. The need to correctly identify terrain features remains critical in preparation of autonomous planetary landing. One technique that may solve this problem is optical correlation. Correlation has been successfully demonstrated under ideal conditions; however, noise significantly affects the ability of the correlator to accurately identify input signals. Optical correlation in the presence of noise must be successfully demonstrated before this technology can be incorporated into system design. An optical correlator is designed and constructed using a modified 2f configuration. Liquid crystal televisions (LCTV) are used as the spatial light modulators (SLM) for both the input and filter devices. The filter LCTV is characterized and an operating curve is developed. Determination of this operating curve is critical for reduction of input noise. Correlation of live input with a programmable filter is demonstrated.

Cotariu, Steven S.↗

Miniaturized optical correlator

A robust optical correlator that is a miniaturized version of the classic Vander-Lugt correlator is developed. The correlator consists of a simple diode laser for illumination and a CMOS photodetector to detect the correlation peak. A set of roof prisms is configured to fold the light path into a compact design. A holographic plate is used for storing the matched filter. This correlator is particularly applicable to docking autonomous vehicles near a predesignated landing mark. This miniature optical correlator is described in terms of its functional performance.

Scholl, M. S.↗

Optical correlators for automated rendezvous and capture

Two dimensional image correlation is a robust technique for recognizing known objects and determining their position with respect to the sensing platform. This capability is of paramount importance to vehicles which must rendezvous and capture using only on-board sensors and processors. Standard digital processors can provide the necessary correlations, but their speed, weight, size and power consumption make them undesirable components of an on-board tracking system. Optical correlators provide correlation results comparable to digital systems, but with a fraction of the size, weight and power and often many times faster. This presentation discusses the application of optical correlators to Automated Rendezvous & Capture (AR&C), and the specific work being done at the Johnson Space Center and DARPA in developing optical correlator technology.

Juday, Richard↗

Correlation studies of Pioneer Venus imagery obtained from PV experiments with near IR imagery obtained from ground-based observations during Venus inferior conjunction

The purpose of this study is to attempt to find correlations between data taken by experiments aboard the Pioneer-Venus Orbiter (PVO) and those obtained from Earth-based near-infrared (NIR) measurements of Venus during periods near inferior conjunction. Since the NIR measurements have been found to provide data on the middle atmosphere cloud morphology and motion, it is assumed that any correlations will also indicate that the PVO experiments are also documenting cloud behavior. If such correlations are found, then a further task is to attempt to study the long term behavior of the cloud features implied by the correlations. Many PVO data have been obtained over an extended period extending from 1978 until the PV demise in 1992. There exists a long, somewhat ill-conditioned time series of data that may contain valuable information on the long time, as well as short term behavior of the clouds, and, derivatively from cloud motion, atmospheric dynamics and wave activity in the Venus atmosphere. For example, determination of the zonal velocities of any OCPP (Cloud Photopolarimeter) 0.935 micron features could then be used for comparisons with data from other sources to attempt to fix the altitude region in which such features existed. A further task of this study is to attempt to correlate any features found in simultaneously obtained data, for example, the OCPP 0.365 and 0.935 micron data. The existence of such correlations may imply that data was obtained in overlapping altitude regions of the atmosphere.

Ragent, Boris↗

Direct correlation of test-analysis cross-orthogonality

This paper presents an alternative to the correlation of individual components of a mode shape vectors by directly examining the sensitivity of the cross-orthogonality between test and analytical mode shapes. If the test and analysis mode shapes are identical, the diagonal elements of the cross-orthogonality will be identical to the test orthogonality matrix, so the cross-orthogonality matrix provides a concise measure of the 'closeness' between test and analysis mode shapes. There are two major advantages to the cross-orthogonality correlation approach. The first is that a direct correlation of this matrix will more directly meet the goal of the correlation effort (measured by cross-orthogonality). Secondly, and more importantly, the correlation of cross-orthogonality greatly reduces the amount of data that needs to be handled when compared to the correlation of mode shapes.

Blelloch, P. A.↗