Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Co”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Enhanced ZIF-8-enabled colorimetric CO 2 sensing through dye-precursor synthesis

The accumulation of carbon dioxide (CO 2 ) within enclosed spaces, along with volatile organic compounds, under certain humidity, temperature, and ventilation conditions is associated with detrimental human health symptoms such as fatigue. Color-based chemical sensing is a promising approach to detect CO 2 levels relevant to indoor air quality through producing fast, quantifiable output visible to the naked eye. In a prior work, a colorimetric gas sensor was fabricated through synthesizing the metal-organic framework, ZIF-8, as the adsorbent, followed by post-synthetic mixing with a dye, phenol red (PSP), and primary amine, ethylenediamine (ED). While this sensor (termed PSP-ED/ZIF-8) maintained its structural integrity in atmospheric conditions and exhibited an increasing fuchsia-to-yellow color change with increasing CO 2 levels in dry environment, the colorimetric response greatly suffered in the presence of humid CO 2 . Here in this work, a significantly improved colorimetric CO 2 sensor (referred to as ED/PSP:ZIF-8) is accomplished through directly incorporating phenol red in the ZIF-8 metal and linker precursor solutions and then blending with ethylenediamine. MATLAB-generated color distributions and in-situ ultraviolet-visible (UV-Vis) spectroscopic studies quantitatively demonstrate an enhanced colorimetric gas response of ED/PSP:ZIF-8 compared to that of PSP-ED/ZIF-8 across an important range of CO 2 for indoor air quality monitoring (500 – 3500 ppm) and across a range of humidity. The new sensor also exhibits high selectivity to CO 2 compared to select volatile organic compounds, such as acetone and ethanol, which contribute to human health symptoms experienced indoors. The enhanced performance is attributed to the proposed incorporation of phenol red within ZIF-8, while maintaining the chemical stability of the MOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effects of co-adsorbed water on different bond cleavages involved in acetic acid decomposition on Pt (111)

Acetic acid decomposition on Pt (111) in the presence of co-adsorbed water is a good model system for oxygenate decomposition on Pt (111) in aqueous phase, with application in hydrogen production and biomass conversion. Here, in this study, we present a density functional theory (DFT) theory calculation of how co-adsorbed water affects different bond cleavages of acetic acid decomposition on Pt (111). The presence of co-adsorbed water generally enhances O$-$H bond cleavage while inhibiting OC$-$O and OC$-$OH bond cleavage. The influence of co-adsorbed water on C$-$H bond cleavage varies the most and depends on the nature of the transition state and how co-adsorbed water stabilizes the initial and final state. Although these trends are useful as general guidance, they are not sufficient to predict the effect on a complex reaction network such as acetic acid decomposition on Pt (111) which has several parallel reaction paths with similar energies. In the absence of co-adsorbed water, the two lowest energy pathways are decarboxylation (DCX) and decarbonylation (DCN) pathways through a common CH 2 COO intermediate, in which the DCX pathway (C$-$H bond cleavage of CH 2 COO) is more favorable than DCN pathway (OC$-$O bond cleavage of CH 2 COO). In the presence of co-adsorbed water, the energy difference between Csingle bondH bond cleavage and OC$-$O bond cleavage of CH 2 COO increases, suggesting an increase in the favorability of acetic acid decarboxylation (formation of carbon dioxide) over acetic acid decarbonylation (formation of carbon monoxide) on Pt (111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

CO 2 capture from wet flue gas using a water-stable and cost-effective metal-organic framework

We report the use of MIL-120 as a water-stable and cost-effective metal-organic framework (MOF) for selectively capturing CO 2 from wet flue gas. Synthesized using inexpensive and environmentally benign reagents in water, MIL-120 possesses one-dimensional pores decorated with hydroxyl-bridged Al(III) ions and benzene rings with an interstitial spacing of 4.78 Å. Carbon dioxide isotherms show steep uptake at low pressure, and the affinity of MIL-120 for CO 2 is 44 kJ mol –1 . CO 2 -loading 13 C solid-state nuclear magnetic resonance and Fourier transform infrared spectra tracking the sorption of CO 2 into MIL-120 revealed that the interplay of pore size, functionality, and dimensionality is vital for CO 2 restriction within the pores of MIL-120. Breakthrough experiments reveal that MIL-120 can capture CO 2 from dry and wet flue gas with uptake capacities of 1.215 and 1.118 mmol g –1 , respectively. Our work highlights the synthetic benefits of MIL-120 and elucidates its selective capture of CO 2 from wet flue gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Engineering Catalyst–Electrolyte Microenvironments to Optimize the Activity and Selectivity for the Electrochemical Reduction of CO 2 on Cu and Ag

We report the electrochemical reduction of carbon dioxide (CO 2 R) driven by renewably generated electricity (e.g., solar and wind) offers a promising means for reusing the CO 2 released during the production of cement, steel, and aluminum as well as the production of ammonia and methanol. If CO 2 could be removed from the atmosphere at acceptable costs (i.e., <$100/t of CO 2 ), then CO 2 R could be used to produce carbon-containing chemicals and fuels in a fully sustainable manner. Economic considerations dictate that CO 2 R current densities must be in the range of 0.1 to 1 A/cm 2 and selectivity toward the targeted product must be high in order to minimize separation costs. Industrially relevant operating conditions can be achieved by using gas diffusion electrodes (GDEs) to maximize the transport of species to and from the cathode and combining such electrodes with a solid-electrolyte membrane by eliminating the ohmic losses associated with liquid electrolytes. Additionally, high product selectivity can be attained by careful tuning of the microenvironment near the catalyst surface (e.g., the pH, the concentrations of CO 2 and H 2 O, and the identities of the cations in the double layer adjacent to the catalyst surface).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Delineating the Roles of Mn, Al, and Co by Comparing Three Layered Oxide Cathodes with the Same Nickel Content of 70% for Lithium-Ion Batteries

High-nickel layered oxides continue to prevail in the energy storage market as the frontmost cathode candidates for next-generation lithium-ion batteries. Demand and development of LiNi 1–x–y Mn x Co y O 2 (NMC) and LiNi 1–x–y Co x Al y O 2 (NCA) cathodes are rampantly increasing, particularly for the electric vehicle (EV) industry. However, the continued presence of cobalt in NMC and NCA cathodes raises global concerns due to geopolitical and ethical issues attributed to Co sourcing. We herein introduce a novel cobalt-free, high-nickel cathode LiNi 0.7 Mn 0.25 Al 0.05 O 2 (NMA70) and benchmark it against Co-containing LiNi 0.7 Mn 0.15 Co 0.15 O 2 (NMC70) as well as Co- and Al-free LiNi 0.7 Mn 0.3 O 2 (NM70) cathodes with equivalent 70% Ni contents that are all synthesized in-house. NMA70 displays a high initial C/10 capacity of 210 mA h g –1 , matching that of NMC70 in half cells with a cutoff voltage of 4.5 V. NMA70 also exhibits an impressive high-voltage full cell cycling performance with a cutoff voltage of 4.4 V with a nearly identical capacity retention of 83% compared to that of 82% for NMC70 after 300 cycles. Postmortem X-ray photoelectron spectroscopy (XPS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), and electron energy loss spectroscopy (EELS) analyses indicate a thinner cathode–electrolyte interface (CEI) developed in NMA70 compared to that in NM70 and unveil a more robust solid-electrolyte interface (SEI) passivation on the graphite anode among all samples. The benefits of Al doping are additionally highlighted with enhanced high-voltage CEI and thermal stabilities in NMA70. Furthermore, this work assesses the roles of Mn, Al, and Co to demonstrate both the practicality and feasibility of synthesizing cobalt-free, high-nickel cathodes that are promising alternatives to current NMC- and NCA-based cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

CO 2 –Brine Contact Angle Measurements on Navajo, Nugget, Bentheimer, Bandera Brown, Berea, and Mt. Simon Sandstones

In this study, contact angles were measured for CO 2 bubbles on six different sandstones (Navajo, Nugget, Bentheimer, Bandera Brown, Berea, and Mt. Simon) that could potentially represent properties of CO 2 storage depositional environments. The impacts of pressure and temperature were studied by focusing on the CO 2 phase behavior in three different scenarios: gaseous, liquid, and supercritical conditions. Despite controlling the sample preparation and cleanliness, CO 2 -brine equilibration conditions, and pressure and temperature, there were inconsistencies in contact angle trends that could largely be attributed to natural sample heterogeneity resulting from localized variations in topography, surface roughness, and mineral composition across the surface. Despite these variations, the analysis of 298 measurements from this study showed that 81% of the contact angles were below 40° representing strongly water-wet to (moderately) water-wet behaviors. Also, 17.3% of the measurements were between 40° and 60° (weakly water-wet) and primarily belonged to small CO 2 bubbles (< 500 μm) that were heavily impacted by localized surface heterogeneity in natural sandstone samples. Additionally, only 1.7% of the measurements had angles greater than 60° and could be classified as CO 2 -wet behavior, but these measurements occurred on extremely small bubbles (100-200 μm) that were very dependent on localized surface heterogeneity. While some of the detailed physics of the CO 2 -brine-sandstone interface is still poorly understood, from an application standpoint, the sandstones of this study were best characterized as strongly water-wet to (moderately) water-wet.

03 NATURAL GAS↗
DOE OSTI2022

Real-Time Monitoring of Gas-Phase and Dissolved CO 2 Using a Mixed-Matrix Composite Integrated Fiber Optic Sensor for Carbon Storage Application

Novel chemical sensors that improve detection and quantification of CO 2 are critical to ensuring safe and cost-effective monitoring of carbon storage sites. Fiber optic (FO) based chemical sensor systems are promising field-deployable systems for real-time monitoring of CO 2 in geological formations for long-range distributed sensing. Here, a mixed-matrix composite integrated FO sensor system was developed with a purely optical readout that reliably operates as a detector for gas-phase and dissolved CO 2 . A mixed-matrix composite sensor coating consisting of plasmonic nanocrystals and hydrophobic zeolite embedded in a polymer matrix was integrated on the FO sensor. The mixed-matrix composite FO sensor showed excellent reversibility/stability in a high humidity environment and sensitivity to gas-phase CO 2 over a large concentration range. This remarkable sensing performance was enabled by using plasmonic nanocrystals to significantly enhance the sensitivity and a hydrophobic zeolite to effectively mitigate interference from water vapor. The sensor exhibited the ability to sense CO 2 in the presence of other geologically relevant gases, which is of importance for applications in geological formations. A prototype FO sensor configuration which possesses a robust sensing capability for monitoring dissolved CO 2 in natural water was demonstrated. Reproducibility was confirmed over many cycles, both in a laboratory setting and in the field. More importantly, we demonstrated on-line monitoring capabilities with a wireless telemetry system, which transferred the data from the field to a website. The combination of outstanding CO 2 sensing properties and facile coating processability makes this mixed-matrix composite FO sensor a good candidate suitable for practical carbon storage applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Tailoring Pore Architecture and Heteroatom Functionality of Polymeric Waste-Derived Nanoporous Carbon for CO 2 Capture Applications

This study proposes upcycling polymeric waste, i.e., waste floral foam, into high-performance nanoporous carbon that efficiently captures CO 2 . This paper presents strategies for improving the properties of nanoporous carbon, which aid in a superior CO 2 capture performance. Initially, pristine nanoporous carbon was produced from waste floral foam using various KOH impregnation ratios. The nanoporous carbon with a 1:2 (waste floral foam:KOH) ratio exhibiting optimal CO 2 capture capability was further advanced through single and dual atom doping. The doping of N and codoping of N,S atoms into the nanoporous carbon altered its textural and surface chemical properties, making them efficient for CO 2 capture. Comparative CO 2 capture studies of pristine nanoporous carbon (NC-x), N-doped nanoporous carbon (N-NC2), and N,S-codoped nanoporous carbon (N,S-NC2) demonstrate the superiority of N-doping. N-doped nanoporous carbon exhibited the largest ultramicroporosity (0.3100 cm3/g, 63.43%) and highest heteroatom content (34.94 atomic %), contributing to its enhanced CO 2 capture capability (4.54 mmol/g). Finally, implementing the “waste-to-depollution” approach, this research lays the groundwork for producing low-cost, environmentally friendly nanoporous carbon with remarkable CO 2 capture attributes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Activation of CO 2 by Actinide Cations (Th + , U + , Pu + , and Am + ) as Studied by Guided Ion Beam and Triple Quadrupole Mass Spectrometry

Reactions of CO 2 with Th+ have been studied using guided ion beam tandem mass spectrometry (GIBMS) and with An + (An + = Th + , U + , Pu + , and Am + ) using triple quadrupole inductively coupled plasma mass spectrometry (QQQ-ICP-MS). Additionally, the reactions ThO + + CO and ThO + + CO 2 were examined using GIBMS. Modeling the kinetic energy dependent GIBMS data allowed determination of bond dissociation energies (BDEs) for D o (Th + -O) and D o (OTh + -O) that are in reasonable agreement with previous GIBMS measurements. The QQQ-ICP-MS reactions were studied at higher pressures where multiple collisions between An + and the neutral CO 2 occur. As a consequence, both AnO + and AnO 2 + products were observed for all An + except Am + , where only AmO + was observed. Here, the relative abundances of the observed monoxides compared to the dioxides are consistent with previous reports of the AnO n + (n = 1, 2) BDEs. Comparison of the periodic trends of the group 4 transition metal, lanthanide (Ln), and actinide atomic cations in reactions with CO 2 (a formally spin-forbidden reaction for most M + ground states), and O 2 (a spin unrestricted reaction) indicate that spin conservation plays a minor role, if any, for the heavier An + metals. Further correlation of Ln + and An + + CO 2 reaction efficiencies with the promotion energy (E p ) to the first electronic state with two valence d-electrons (E p (5d 2 ) for Ln + and E p (6d 2 ) for An + ) indicates that the primary limitation in the activation of CO 2 is the energetic cost to promote from the electronic ground state of the atomic metal ion to a reactive state.

bond activation↗
DOE OSTI2025

CO 2 Capture Characteristics of Hyperbranched Poly(alkylene imine): A Molecular Dynamics Simulation Approach

This study explores the CO 2 capture characteristics of hyperbranched poly(ethylenimine) (HB-PEI) and poly- (propyleneimine) (HB-PPI) through molecular dynamics simulations using density functional theory-calibrated force fields. Key features such as density, free volume, glass transition temperature, CO 2 /H 2 O distribution, and molecular diffusion are systematically investigated to elucidate structure−function relationships under dry and hydrated conditions. HB-PEI demonstrates a slightly higher density and lower free volume compared to HB-PPI yet shows superior CO 2 capture due to the high amine concentration. Glass transition analysis indicates a higher thermal mobility in HBPEI, enhancing the CO 2 diffusivity. Pair correlation and coordination analyses confirm a stronger affinity of CO 2 with primary and secondary amines, particularly in hydrated environments where water competes with CO 2 for binding sites. Despite its more compact structure, HB-PEI outperformed HB-PPI in CO 2 and H 2 O transport, as confirmed by higher diffusion coefficients across all hydration levels. These findings highlight a critical balance among polymer architecture, amine accessibility, and hydration in designing next-generation solid amine sorbents for efficient direct air capture applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of Gold Catalyst Surface Morphology on Wetting Behavior and Electrochemical CO 2 Reduction Performance in a Large-Area Zero-Gap Gas Diffusion Electrolyzer

We report catalyst surface area and wetting behavior are key factors in determining the performance of gas diffusion electrode (GDE) electrolyzers for electrochemical CO 2 reduction. In this work, we report the integration of sub-1 μm thick nanoporous gold (npAu) catalyst coatings into a large-area (25 cm 2 ) zero-gap electrolyzer. The npAu coatings were prepared by magnetron sputtering (MS) of thin AgAu alloy films on the microporous carbon layer of a gas diffusion layer (GDL) followed by Ag leaching. Compared to MS Au films of the same thickness, npAu catalyst coatings enable higher Faradaic efficiencies and improved catalyst stability for CO 2 -to-CO reduction with Faradaic efficiencies of up to 88% at 100 mA/cm 2 . For a 800 nm npAu coating, the device level energy efficiency for CO 2 to CO conversion reaches 45% (52% for CO + H 2 ) at 100 mA/cm 2 with a single pass CO 2 conversion efficiency of ~12%. Contact angle measurements reveal that npAu coatings provide a more hydrophobic electrode interface compared to MS Au coatings, suggesting that the more hydrophobic interfacial environment of npAu coatings helps mitigating electrode flooding which is associated with performance deterioration over time.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Transient Studies of CO 2 Adsorption over CeO 2 Nanostructures with In Situ DRIFTS and Modulation Excitation

Experiments of in-situ DRIFTS combined with modulation excitation (ME) spectroscopy showed a rich surface chemistry associated with the adsorption of CO 2 on nanocubes and nanospheres of ceria. The nanocubes exposed faces with a (100) orientation, with the edges and corners displaying (110) and (111) orientations, respectively. Here, the nanospheres mainly contained ceria (111) and (110) planes. DFT calculations showed that CO 2 is a multidentate adsorbate on ceria that can undergo changes in its bonding configuration depending on the chemical environment. At 250 °C, a temperature typically used for the conversion of CO 2 into oxygenates, alkanes and olefins, CO 2 reacted with O centers or OH groups present on the nanocubes and nanospheres to yield bi- and tri-dentate carbonates, hydroxycarbonates, and formates. Both nanostructures were highly reactive and a dynamic equilibrium was established: carbonate species were rapidly generated upon the injection of CO 2 and they decomposed upon the removal of CO 2 from the gas phase. In the case of the ceria nanocubes, the adsorption/desorption processes were essentially reversible, opening the door to catalytic transformations. A larger concentration of defects in the ceria nanospheres led to strongly bound carbonates and formates that may be spectators, site blockers, or surface modifiers in catalytic processes. In the ME studies, additional intermediates were detected, and it was clear that the response of surface species to the presence/absence of CO 2 was highly dependent on the morphology of the ceria nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Self-Inhibition Phenomena in Cu 3 Pt Oxidation by CO 2

Here, this study investigates the oxidation behavior of Cu 3 Pt(100) in CO 2 using a combination of ambient-pressure X-ray photoelectron spectroscopy, mass spectroscopy, and density functional theory modeling. Our in situ measurements reveal the simultaneous oxidation and reduction of Cu 2 O due to the opposing effects of atomic oxygen and CO generated from dissociative CO 2 adsorption, leading to a dynamic equilibrium state of simultaneously occurring redox reactions. Complementary atomistic calculations elucidate the inhibitory effects of subsurface Pt enrichment and the counteracting roles of CO 2 and CO in surface oxidation and reduction. These results provide mechanistic insights into the dissociative pathway of CO 2 molecules and dynamic evolution of surface composition and reactivity of Cu-based alloy catalysts in CO 2 -rich environments, with broader implications for tuning gas–surface reactions by manipulating gas reactants or solid surface composition.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure and Dynamics of CO 2 at the Air–Water Interface from Classical and Neural Network Potentials

The accurate description of the structure and dynamics of CO 2 at the instantaneous air–water interface, along with the effects of surface fluctuations on the CO 2 -transport processes, is essential for the development of negative emission technologies aimed at minimizing climate change. In this study, we performed molecular dynamics simulations of CO 2 at the air–water interface using neural network potentials (NNPs) trained on ab initio data generated through density-functional-theory-based molecular dynamics simulations. We compared these results with classical force fields to assess their performance in modeling interfacial CO 2 behavior. Our findings revealed that the asymmetric interactions, coupled with thermal surface fluctuations at the air–water interface, significantly influence CO 2 transport into the aqueous phase. The simulations demonstrate that classical force fields underestimate both the free energy of CO 2 transport and the strength of its interactions at the interface compared with the neural network potentials. In conclusion, the free energy and the interfacial dynamics of CO 2 are primarily influenced by the distribution of water within the instantaneous interfacial water layer, responsible for creating an asymmetric intermolecular interaction environment within the interfacial region.

Ab initio molecular dynamics↗
DOE OSTI2021

Thermodynamic Trends for Reduction of CO by Molecular Complexes

Selective reduction of CO 2 into fuels and chemical feedstocks is highly desirable to reduce our dependence on fossil fuels. Most molecular catalysts afford 2e – reduction products, such as CO or HCO 2 – , as opposed to more reduced products. Here we present an analysis of the thermodynamic limitations for reduction of the CO ligand in the form of a series of isostructural group 6 carbonyl complexes, Cp*M(CO) 3 (P(OMe) 3 ) + (M = Cr, Mo, and W). Additionally, the free energy for stepwise transfer of a hydride (H – ) and a proton (H + ) to the CO ligand, resulting in a hydroxycarbene (CHOH) complex, was measured by equilibration with H – /H + donors and acceptors with known hydricity or acidity. Together, these two reaction steps are equivalent to a net addition of H 2 across the CO ligand. A large and unfavorable free energy for H 2 addition (Δ G ° H2 ) was measured for all three complexes and decreases in the order Cr > Mo > W. The trend for these complexes is opposite to the trend previously reported for group 7 carbonyl complexes, for which Δ G ° H2 decreases moving up the group, Re > Mn. Computational analysis indicates the trends can be described in terms of electrostatic effects, where a low Δ G ° H2 is obtained in complexes that balance the atomic charges of the M–C≡O fragment of the complex. These findings can be used to design metal carbonyl complexes with a more energetically accessible H 2 addition, which will facilitate the development of molecular catalysts for reduction of CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic Water Electrolysis by Co–Cu–W Mixed Metal Oxides: Insights from X-ray Absorption Spectroelectrochemistry

Mixed metal oxides (MMOs) are a promising class of electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Despite their importance for sustainable energy schemes, our understanding of relevant reaction pathways, catalytically active sites, and synergistic effects is rather limited. Here, we applied synchrotron-based X-ray absorption spectroscopy (XAS) to explore the evolution of the amorphous Co–Cu–W MMO electrocatalyst, shown previously to be an efficient bifunctional OER and HER catalyst for water splitting. Ex situ XAS measurements provided structural environments and the oxidation state of the metals involved, revealing Co 2+ (octahedral), Cu + / 2+ (tetrahedral/square-planar), and W 6+ (octahedral) centers. Operando XAS investigations, including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), elucidated the dynamic structural transformations of Co, Cu, and W metal centers during the OER and HER. The experimental results indicate that Co 3+ and Cu 0 are the active catalytic sites involved in the OER and HER, respectively, while Cu 2+ and W 6+ play crucial roles as structure stabilizers, suggesting strong synergistic interactions within the Co–Cu–W MMO system. In conclusion, these results, combined with the Tafel slope analysis, revealed that the bottleneck intermediate during the OER is Co 3+ hydroperoxide, whose formation is accompanied by changes in the Cu–O bond lengths, pointing to a possible synergistic effect between Co and Cu ions. Our study reveals important structural effects taking place during MMO-driven OER/HER electrocatalysis and provides essential experimental insights into the complex catalytic mechanism of emerging noble-metal-free MMO electrocatalysts for full water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exploitation of Pore Structure for Increased CO 2 Selectivity in Type 3 Porous Liquids

CO 2 capture requires materials with high adsorption selectivity and an industrial ease of implementation. To address these needs, a new class of porous materials was recently developed that combines the fluidity of solvents with the porosity of solids. Type 3 porous liquids (PLs) composed of solvents and metal–organic frameworks (MOFs) offer a promising alternative to current liquid carbon capture methods due to the inherent tunability of the nanoporous MOFs. However, the effects of MOF structural features and solvent properties on CO 2 –MOF interactions within PLs are not well understood. Herein experimental and computational data of CO 2 gas adsorption isotherms were used to elucidate both solvent and pore structure influences on ZIF-based PLs. The roles of the pore structure including solvent size exclusion, structural environment, and MOF porosity on PL CO 2 uptake were examined. A comparison of the pore structure and pore aperture was performed using ZIF-8, ZIF-L, and amorphous-ZIF-8. Adsorption experiments here have verified our previously proposed solvent size design principle for ZIF-based PLs (1.8× ZIF pore aperture). Furthermore, the CO 2 adsorption isotherms of the ZIF-based PLs indicated that judicious selection of the pore environment allows for an increase in CO 2 selectivity greater than expected from the individual PL components or their combination. This nonlinear increase in the CO 2 selectivity is an emergent behavior resulting from the complex mixture of components specific to the ZIF-L + 2'-hydroxyacetophenone-based PL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Immobilizing a Lehn-Type Catalyst with Nitrocyclocondensation Chemistries: CO 2 Reduction on Silicon Hybrid Photoelectrodes

Here, we present the first examples of installing a redox reporter and CO 2 reduction (CO 2 R) catalyst onto freshly HF-etched Si (photo)­electrodes using a solution-phase nitrocyclocondensation (NCC) reaction. Previous studies detailed the mechanism of NCC reactions on Si under ultrahigh vacuum conditions but have not applied these chemistries to generate functional (photo)­electrodes. Installing 4-nitrophenyl ferrocene (4-NpFc) molecules directly onto degenerately doped p + Si allowed us to evaluate the effects of different NCC reaction conditions on coverage (e.g., 3.6 ± 1.2 × 10 –11 mol/cm 2 ) and electrochemical reversibility. The 4-NpFc molecules remained immobilized under the reducing potentials (−2.0 V vs Fc +/0 in acetonitrile) needed to drive molecular CO 2 R catalysts. Installing 4-nitroaniline (4-NA) molecules onto low-doped pSi allowed us to couple Lehn-type Re­(I) catalysts with pendant carboxylic acids. The CO Faradaic efficiency of CO production under 1-sun illumination (−2.15 V vs Fc +/0 ) was 23% in CO 2 -saturated electrolyte, a value that surpasses previous examples of CO 2 R catalyst monolayers on Si. These two examples highlight the versatility of solution-phase NCC attachment chemistries for generating functional Si (photo)­electrodes.

catalysis↗