SEARCH · Engineering Papers

Results for “Challenge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Demonstration of the Reproducibility Challenges in the Sintering Behavior of Lithium‐Stuffed Garnets in Scaling up Synthesis

Lithium-stuffed garnets, such as Li 7 La 3 Zr 2 O 12 (LLZO), are promising candidates for next-generation solid-state batteries because of their high room-temperature ionic conductivity and chemical stability against lithium metal anodes, which are crucial for achieving higher energy density. However, realizing LLZO's potential in practical devices requires synthesis methods that can be scaled reliably to large batch sizes for manufacturing. Herein, we investigate the sintering reproducibility of LLZO synthesized at larger scales using ultrasonic spray pyrolysis, a cost-effective and scalable synthesis route. Two 100 g batches of Al-doped LLZO are prepared and their sintering behavior is examined in detail. Both Al-LLZO batches contain over 90 wt.% cubic-phase LLZO, and both batches exhibit room temperature conductivities greater than 1 × 10 −4 S cm −1 at a relative density above 0.8. However, variations in secondary phases and subtle differences in Al content lead to significant differences in densification and microstructure. These results demonstrate that LLZO's sintering behavior is highly sensitive to small changes in secondary phases and Al content, creating reproducibility challenges when moving from laboratory- to manufacturing-scale synthesis.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Current Advances in i‐MAX Phases and their Two Dimensional Derivative i‐MXenes: Challenges and Opportunities (Adv. Electron. Mater. 21/2025)

The discovery of quaternary (M′ 2/3 M′′ 1/3 ) 2 AX phases has introduced newly ordered i-MAX phases in the MAX phase community. These atomically layered solids display in-plane chemical ordering of M′ and M′′, featuring a frustrated triangular lattice overlaid on an M′ honeycomb arrangement and an A Kagomé lattice. This unique structure gives rise to novel electronic and magnetic properties, paving the way for diverse applications and the creation of new MXenes. Both experimental and theoretical research have confirmed that these i-MAX phases can be chemically exfoliated into single- or multilayered and vacancy-ordered 2D transition metal carbides, known as i-MXenes. These 2D i-MXenes exhibit intriguing optical, electrochemical, piezoelectric, and magnetic properties, which are decidedly reliant on the surface functional groups (-F, -OH, -O). This review encompasses all available theoretical and experimental studies on i-MAX and i-MXenes, with a focus on their fundamental properties, organized in multiple sections. Along with the experimental investigation, significant attention is also directed toward theoretical predictions of potential i-MAX phases and i-MXenes, including their structural, vibrational, electronic, optical, magnetic, mechanical, piezoelectric, and electrochemical properties. This article provides a comprehensive understanding of vital properties of these materials by providing a review of foundational literature with existing challenges, limitations, and future perspectives.

electrochemical, electronic↗

DOE OSTI2021

Single-Ion Conducting Polymer Electrolytes for Solid-State Lithium–Metal Batteries: Design, Performance, and Challenges

Realizing solid-state lithium batteries with higher energy density and enhanced safety compared to the conventional liquid lithium-ion batteries is one of the primary research and development goals set for next-generation batteries in this decade. In this regard, polymer electrolytes have been widely researched as solid electrolytes due to their excellent processability, flexibility, and low weight. With high cationic transference numbers (t Li + close to 1), single-ion conducting polymer electrolytes (SICPEs) have tremendous advantages compared to polymer electrolyte systems (t Li + < 0.4) because of their potential to reduce the buildup of ion concentration gradients and suppress growth of lithium dendrites. The current review covers the fundamentals of SICPEs, including anionic unit synthesis, polymer structure design, and film fabrication, along with simulation and experimental results in solid-state lithium–metal battery applications. Overall, a perspective on current challenges, possible solutions, and potential research directions of SICPEs is also discussed to provide the research community with the critical technical aspects that may advance SICPEs as solid electrolytes in next-generation energy storage systems.

25 ENERGY STORAGE↗

DOE OSTI2022

Enabling Extreme Fast-Charging: Challenges at the Cathode and Mitigation Strategies

We report charging lithium-ion batteries (LiBs) in 10 to 15 min via extreme fast-charging (XFC) is important for the widespread adoption of electric vehicles (EVs). Lately, the battery research community has focused on identifying XFC bottlenecks and determining novel design solutions. Like other LiB components, cathodes can present XFC bottlenecks, especially when considering long-term battery life. Therefore, it is necessary to develop a comprehensive understanding of how XFC conditions degrade LiB cathodes. The present article reviews relevant cathode-focused studies and summarizes the current understanding regarding cathode performance and aging issues under XFC conditions. Dominant aging modes and mechanisms are identified at different length-scales with electrochemical correlations for LiNi x Mn y Co z O 2 (NMC)-based cathodes. A range of electrochemical techniques and models provide key insights into cathode performance and life issues. A suite of multimodal and multiscale microscopy and X-ray techniques is surveyed to quantify chemical, structural, and crystallographic NMC-cathode degradation. Cathode cycle-life is scaled to equivalent EV miles to illustrate how cathode degradation translates to real-world scenarios and quantifies cathode-related bottlenecks that hinder XFC adoption. Finally, the article discusses several cathode cycle-life aging mitigation strategies with example case studies and identifies remaining challenges.

25 ENERGY STORAGE↗

DOE OSTI2021

Operability and control in process intensification and modular design: Challenges and opportunities

Abstract In this article, the importance of considering operability and control criteria in the analysis and design of intensified and modular processes is discussed. We first analyze the impact on operability of key factors including: (i) degrees of freedom, (ii) process constraints, (iii) numbering up vs. scaling up, and (iv) dynamic/periodic operation. Comparative examples are presented to showcase the pros and cons in intensified/modular systems vs. their conventional counterparts from operability and control aspects. Then we look into metrics and tools to address these challenges such as: (i) flexibility analysis, (ii) operability‐based design, and (iii) advanced model‐based control. Considering different conceptual design stages as synthesis intensification, steady‐state design, and dynamic operational optimization, we highlight the need to incorporate different levels of operability considerations. Future research opportunities and perspectives are also identified, particularly emphasizing the importance of a holistic strategy for integrated design, operability, and control of intensified and modular process systems.

Pistikopoulos, Efstratios N.↗

DOE OSTI2023

Experimental and computational design tools for industrial drying processes: Challenges in process‐limit prediction

Abstract The coating and drying of inks and slurries are important steps to manufacture a plethora of products. Drying processes, particularly, comprise energy‐intensive steps that affect product cost and quality. Prior work has highlighted failures of various multicomponent diffusivity models to conserve mass in dryer modeling and challenges in predicting process limits given variability in published values of key thermodynamic parameters. Herein, we develop a computational model and benchtop drying experiments to investigate these concerns for drying polymer‐laden coatings. Model predictions of process limits in a single‐zone drying oven demonstrate that published variability in Flory–Huggins parameter yields large variations in predicted operating temperatures above which blistering occurs. This indicates that caution should be exercised when choosing approaches to obtain or predict the Flory–Huggins parameter, and that both benchtop drying experiments and a set of additional experiments, such as sorption experiments, are needed to fully characterize and optimize a given drying process.

Parrish, Chance↗

DOE OSTI2021

3D printing of lignin: Challenges, opportunities and roads onward

Abstract As the second most abundant biopolymer on earth, and as a resource recently becoming more available in separated and purified form on an industrial scale due to the development of new isolation technologies, lignin has a key role to play in transitioning our material industry towards sustainability. Additive manufacturing (AM), the most efficient‐material processing technology to date, has likewise made great strides to promote sustainable industrial solutions to our needs in engineered products. Bringing lignin research to AM has prompted the emergence of the nascent “lignin 3D printing” field. This review presents the recent state of art of this promising field and highlights its challenges and opportunities. Following a review of the industrial availability, molecular attributes, and associated properties of technical lignins, we review R&D efforts at implementing lignin systems in extrusion‐based and stereolithography (SLA) printing technologies. Doing so underlines the adage of lignin research that “all lignins are not created equal,” and stresses the opportunity nested in this chemical diversity created mostly by differences in isolation conditions to molecularly select and tune the attributes of technical lignin systems towards desirable properties, be it by modification or polymer blending. Considering the AM design process in its entirety, we finally propose onward routes to bring the full potential to this emerging field. We hope that this review can help promote the unique value and overdue industrial role of lignin in sustainable engineered materials and products.

36 MATERIALS SCIENCE↗

DOE OSTI2022

An idea to explore: How an interdisciplinary undergraduate course exploring a global health challenge in molecular detail enabled science communication and collaboration in diverse audiences

Abstract Communication and collaboration are key science competencies that support sharing of scientific knowledge with experts and non‐experts alike. On the one hand, they facilitate interdisciplinary conversations between students, educators, and researchers, while on the other they improve public awareness, enable informed choices, and impact policy decisions. Herein, we describe an interdisciplinary undergraduate course focused on using data from various bioinformatics data resources to explore the molecular underpinnings of diabetes mellitus (Types 1 and 2) and introducing students to science communication. Building on course materials and original student‐generated artifacts, a series of collaborative activities engaged students, educators, researchers, healthcare professionals and community members in exploring, learning about, and discussing the molecular bases of diabetes. These collaborations generated novel educational materials and approaches to learning and presenting complex ideas about major global health challenges in formats accessible to diverse audiences.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Challenges and Opportunities of Fe-based Core-Shell Catalysts for Fischer-Tropsch Synthesis

Here, Fe-based catalysts are an active, selective, and low-cost option for tuning Fischer-Tropsch synthesis (FTS) selectivity toward desirable light olefins. By encapsulating Fe within ZSM-5, the resultant core-shell catalysts have the potential to control the product distribution via secondary reactions that occur over the acid sites of the zeolite shell. In this paper, Fe is encapsulated within ZSM-5 via the seed-directed growth technique and characterized with a suite of analytical techniques including Mössbauer spectroscopy and X-ray absorption fine structure (XAFS). Characterization of the core-shell catalysts indicates that some of the Fe-based active phase is destabilized during seed-directed growth, demonstrating the challenges associated with encapsulating an Fe-based active phase within zeolites. However, comparing FTS performance of the core-shell catalyst with the Fe-based control synthesized via incipient wetness impregnation demonstrates improved selectivity toward the desired C 2 -C 4 olefins and C 5+ hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Bipolar Redox‐Active Molecules in Non‐Aqueous Organic Redox Flow Batteries: Status and Challenges

Abstract In this Review, recent advances in the development of organic bipolar redox‐active molecules (BRMs) for redox‐flow batteries (RFBs) are discussed, with special emphasis on their utilization in non‐aqueous systems. BRMs are single molecules that can be used as both anolyte and catholyte. Their unique redox chemistry enables identical components to be present in RFBs, which has distinct advantages in storage, mitigating crossover and compound degradation. Recent scientific innovations have uncovered three main strategies in preparing these bipolar species: developing stable radicals that are capable of both positive and negative redox reactions, covalently bridging electron donor‐acceptor motifs on one single molecule, and forming biredox eutectic mixtures through physically mixing active components. These approaches not only enabled symmetric flow battery design, but also resulted in electroactive materials with improved properties such as solubility, stability, and cell voltage. Nevertheless, much is still to be done. Importantly, developing BRMs that are competitive with vanadium RFBs in all performance indicators (e. g. solubility >1.0 M, voltage output >2.0 V, and cycling longevity >10 000 cycles) remains a challenge. Mechanistic studies including molecular dynamics, plausible degradation processes, and electrode/solution interface are necessary to peer into key parameters that dominate their battery performance. Accordingly, we review the current status and suggest future opportunities in these areas.

Li, Min↗

DOE OSTI2022

Current challenges in hydrate‐based desalination: Kinetic and thermodynamic perspective

Abstract Water scarcity is becoming a severe problem worldwide due to inadequate freshwater resources and swift population growth. Seawater desalination is one of the vital approaches to meet the demand for freshwater. However, energy and associated costs with conventional seawater desalination techniques are incentivizing non‐conventional water desalination processes. Water desalination using gas hydrates formation is one of the emerging non‐conventional processes. In this perspective article, recent advances in hydrate‐based seawater desalination (HBSD) have been critically analyzed to outline a future path towards a clean and efficient hydrate‐based desalination process. It provides a detailed comparison of various processes developed over decades, and measured desalination efficiencies with their process details. Moreover, the current challenges, limitations, and future perspectives of hydrate‐based desalination are also discussed. The study also recapitulates the thermodynamics and kinetics aspects of the hydrate‐based desalination process. In addition, various factors controlling the desalination efficiencies, such as control of the separation of hydrate crystals, salt deposition on hydrate particles, and hydrate morphology, were thoroughly investigated with their proposed process designs. The kinetics of hydrate formation is also assessed, with the possibility of a zero‐induction regime and its consequent impact on hydrate morphology. The current capabilities of the thermodynamics models (Gibbs energy minimization + electrolyte equation of state) were discussed using various commercially available software. Additionally, the role of hydrate promotors is also discussed, which can reduce the higher cost associated with the hydrate‐based desalination process.

Khan, Muhammad Naveed↗

DOE OSTI2026

A Dendrite-Resistant Sodium/Porous-Carbon Anode for Solid-State Batteries – Strategies and Challenges for Low-Pressure Operation

Sodium solid-state batteries (Na-SSB) have gained interest recently due to the abundance of Na over Li, but they still tend to fail due to dendrites under practical current densities and cycling capacities. To overcome this, Na-SSBs are frequently tested with impractically high applied pressure. In this work, a porous carbon interfacial layer is utilized in conjunction with Na-ß”-Al2O3 solid electrolytes to enable Na-cycling at milder cell pressures. This sodium/porous carbon layer enables improved solid-state Na cycling in symmetric cells, up to a current density of 10 mA cm-2 at 25 °C. Cycling up to 1 mAh cm-2 is challenging with low pressure, but 1 mAh cm-2 capacity can be reliably cycled at 1 mA cm-2 at an elevated temperature of 60 °C in symmetric cells. Finally, the evolution of the interface and sodium/carbon anode is evaluated with cryogenic ion-milling and cross-sectional imaging revealing that, depending on testing temperature, pressure, current density, and capacity, void formation, Na-extraction from porous carbon, delamination of the porous carbon matrix, or a combination of these occurs at the interface between Na-metal and BASE. Despite this, excellent dendrite resistance is achieved, and a full-cell design utilizing a Na-transition metal oxide cathode is still able to achieve an areal capacity of ~ 2.7 mAh cm-2 at 0.125 mA cm-2. This work demonstrates an alternative pathway toward a Na-metal anode for Na-SSBs without the requirement of excessive stack pressure.

low-cost↗

DOE OSTI2021

Using projection operators with maximum overlap methods to simplify challenging self-consistent field optimization

Maximum overlap methods are effective tools for optimizing challenging ground- and excited-state wave functions using self-consistent field models such as Hartree-Fock and Kohn-Sham density functional theory. Nevertheless, such models have shown significant sensitivity to the user-defined initial guess of the target wave function. Here in this work, a projection operator framework is defined and used to provide a metric for non-aufbau orbital selection in maximum-overlap-methods. The resulting algorithms, termed the Projection-based Maximum Overlap Method (PMOM) and Projection-based Initial Maximum Overlap Method (PIMOM), are shown to perform exceptionally well when using simple user-defined target solutions based on occupied/virtual molecular orbital permutations. This work also presents a new metric that provides a simple and conceptually convenient measure of agreement between the desired target and the current or final SCF results during a calculation employing a maximum-overlap method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Embracing Anisotropy – Opportunities and Challenges to the Functional Application of Advanced Manufacturing of Energetic Materials

The growing use of additive manufacturing (AM) to manipulate materials, such as metals and plastics, is a result of the desire to realize the potential benefits (i.e., cheaper, faster, and simpler production of complex parts) of the process and the efforts of countless researchers to reduce the method to practice for a broad range of materials. However, in the field of energetic materials (EMs), similar benefits have been broadly claimed, but the transition to practical, industrial applications is still not obvious. The translation of small-scale experimental results to real-world application will have unique challenges, especially due to the nature and requirements of EM functionality. Some of the benefits of AM, such as simpler and faster part creation, are more easily realized. However, attaining the most profound benefits, such as added functionality enabled by spatial gradations of composition or density, will require much more effort from the EMs community to put them into general use.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Materials Studies of Niobium Thin Films for Quantum Circuit Applications: Progress and Challenges

Niobium (Nb) films have emerged as a crucial material in the development of superconducting qubits, which are key components in quantum computing technology. Here, this review provides a comprehensive examination of Nb films from a materials perspective, focusing on their intrinsic properties, fabrication methods/techniques, and their influence on qubit performance, particularly through surface and interface driven loss mechanisms. We discuss the key material properties that are essential for qubit operation. Various deposition techniques for Nb thin films, such as sputtering, evaporation, molecular beam epitaxy, and atomic layer deposition, are explored, alongside their impact on film quality, uniformity, and qubit performance. Additionally, the influence of surface roughness, thin-film thickness, and substrate materials on quantum coherence is analyzed. Challenges such as defects and material degradation in Nb films are reviewed, along with strategies to mitigate these issues. Finally, we present the latest advancements and future directions in Nb film research, including potential improvements to enhance qubit coherence and scalability for large-scale quantum computing systems. Ultimately, a deeper understanding of surface and interface phenomena is essential for pushing the limits of qubit performance and realizing next-generation quantum technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2023

Targeted mutagenesis with sequence–specific nucleases for accelerated improvement of polyploid crops: Progress, challenges, and prospects

Many of the world's most important crops are polyploid. The presence of more than two sets of chromosomes within their nuclei and frequently aberrant reproductive biology in polyploids present obstacles to conventional breeding. The presence of a larger number of homoeologous copies of each gene makes random mutation breeding a daunting task for polyploids. Genome editing has revolutionized improvement of polyploid crops as multiple gene copies and/or alleles can be edited simultaneously while preserving the key attributes of elite cultivars. Most genome–editing platforms employ sequence–specific nucleases (SSNs) to generate DNA double–stranded breaks at their target gene. Such DNA breaks are typically repaired via the error–prone nonhomologous end–joining process, which often leads to frame shift mutations, causing loss of gene function. Genome editing has enhanced the disease resistance, yield components, and end–use quality of polyploid crops. However, identification of candidate targets, genotyping, and requirement of high mutagenesis efficiency remain bottlenecks for targeted mutagenesis in polyploids. In this review, we will survey the tremendous progress of SSN–mediated targeted mutagenesis in polyploid crop improvement, discuss its challenges, and identify optimizations needed to sustain further progress.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2021

Challenges, opportunities, and a research roadmap for downwind wind turbines

This study investigates the challenges and opportunities presented by downwind wind turbines and offers a roadmap of future research pathways to maximize their potential. Multidisciplinary design, analysis, and optimization comparison studies between upwind and downwind configurations on a modern 10-MW offshore wind turbine are presented to support the discussion. On one hand, the downwind rotor is found to consistently have a smaller swept area under loading. As a result, the downwind design produces less annual energy production (-1.2%). On the other hand, lighter blades for the downwind configuration lead to lower capital costs (-1.7%), so there is little difference in the levelized cost of energy between the two. Key ultimate and fatigue loads are compared, with some values increasing in the downwind configuration, while others decrease. The impact of a downwind configuration on the tower and the impacts of cone and tilt angles and free-yaw system on the levelized cost of energy are also investigated. The results show a mix of some advantages and disadvantages. Given these results, four areas of research in advanced controls, highly tilted rotors, higher fidelity aerodynamic models, and floating wind are proposed for downwind wind turbines.

17 WIND ENERGY↗

DOE OSTI2021

Weather radar in Nepal: opportunities and challenges in a mountainous region

Extreme rainfall is one of the major causes of natural hazards in the central Himalayan region, including Nepal. The performance of strategies to manage hazards and related risks relies on the accuracy of quantitative hydrometeorological prediction. Rain gauges have traditionally been used to measure the rainfall amount. However, point measurements with limited gauge coverage cannot accurately represent spatial precipitation variability in complex topography. Weather radar have shown potential for useful information on accurate areal rainfall estimates. The Department of Hydrology and Meteorology (DHM) in Nepal installed their first weather radar in 2019 in the western region of the country. Two more radars will be added to the planned radar network in the near future, in the country's central and eastern regions, respectively. We highlight both the opportunities and challenges with radar installation and observation in the mountainous regions. Radar-rainfall estimates across the Himalayas can be useful to inform decision-making in a broad range of infrastructure sectors, including water, energy, construction, transportation, and agriculture.

54 ENVIRONMENTAL SCIENCES↗