Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPOSITE MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

MATRIX 2 RESULTS OF THE FY07 ENHANCED DOE HIGH-LEVEL WASTE MELTER THROUGHPUT STUDIES AT SRNL

High-level waste (HLW) throughput (i.e., the amount of waste processed per unit time) is a function of two critical parameters: waste loading (WL) and melt rate. For the Waste Treatment and Immobilization Plant (WTP) at the Hanford Site and the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS), increasing HLW throughput would significantly reduce the overall mission life cycle costs for the Department of Energy (DOE). The objective of this study was to generate supplemental validation data that could be used to determine the applicability of the current liquidus temperature (TL) model to expanded DWPF glass composition regions of interest based on higher WLs. Two specific flowsheets were used in this study to provide such insight: (1) Higher WL glasses (45 and 50%) based on future sludge batches that have (and have not) undergone the Al-dissolution process. (2) Coupled operations supported by the Salt Waste Processing Facility (SWPF), which increase the TiO{sub 2} concentration in glass to greater than 2 wt%. Glasses were also selected to address technical issues associated with Al{sub 2}O{sub 3} solubility, nepheline formation, and homogeneity issues for coupled operations. A test matrix of 28 glass compositions was developed to provide insight into these issues. The glasses were fabricated and characterized using chemical composition analysis, X-ray Diffraction (XRD), TL measurement and the Product Consistency Test (PCT). The results of this study are summarized below: (1) TiO{sub 2} concentrations up to {approx} 3.5 wt% were retained in DWPF type glasses, where retention is defined as the absence of crystalline TiO{sub 2} (i.e., unreacted or undissolved) in the as-fabricated glasses. Although this TiO{sub 2} content does not bound the projected SWPF high output flowsheet (up to 6 wt% TiO{sub 2} may be required in glass), these data demonstrate the potential for increasing the TiO{sub 2} limit in glass above the current limit of 2 wt% (based strictly on retention or solubility). (2) For those study glasses that had very close compositional overlap with the model development and/or model validation ranges of the current DWPF TL model (except TiO{sub 2} and MgO concentrations), there was very little difference in the predicted and measured TL values. Even though the TiO{sub 2} concentrations were above the 2 wt% upper limit, the results indicate that the current T{sub L} model is applicable in this compositional region with TiO{sub 2} contents up to approximately 3.5 wt%. (3) As the target glass compositions diverge from the model development and validation ranges, the T{sub L} data suggest that the model under-predicted the measured values. These discrepancies imply that there are individual oxides or oxide combinations that need to be accounted for in the model. These oxides include B{sub 2}O{sub 3}, SiO{sub 2}, MnO, TiO{sub 2} and/or their combinations. More data would be required to fill in these anticipated DWPF compositional regions for higher WL glasses so that the model coefficients could be refit to account for these differences. (4) Based on PCT response of HWL-21 and HWL-22 (two glasses that were prone to nepheline formation) it appears that increasing the B{sub 2}O{sub 3} concentration in glass does not consistently suppress the formation of nepheline in glasses with higher Al{sub 2}O{sub 3} and/or Na{sub 2}O content. Although the chemical durabilities of the quenched versions of these glasses were very acceptable, the canister centerline cooled (ccc) glasses exhibited a considerable decrease in durability and were found to contain nepheline via XRD. In fact, one of the glasses had a release that was 5 times greater than that of the Environmental Assessment (EA) benchmark glass. These results suggest a need for a more fundamental understanding of the compositional and kinetic effects of nepheline formation in high WL glasses. (5) Data have been generated in support of the replacement of the homogeneity constraint with the Al{sub 2}O{sub 3} and/or sum of alkali constraints for coupled operations as previously completed for sludge-only operations. This strategy should be pursued for either the compositional region anticipated for coupled operations or as part of the variability study for each sludge batch. The PCT responses of the study glasses suggest a high probability that this strategy could be defended at some later date.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Model calibration and validation for OFMSW and sewage sludge co-digestion reactors

Highlights: > Disintegration is the limiting step of the anaerobic co-digestion process. > Disintegration kinetic constant does not depend on the waste particle size. > Disintegration kinetic constant depends only on the waste nature and composition. > The model calibration can be performed on organic waste of any particle size. - Abstract: A mathematical model has recently been proposed by the authors to simulate the biochemical processes that prevail in a co-digestion reactor fed with sewage sludge and the organic fraction of municipal solid waste. This model is based on the Anaerobic Digestion Model no. 1 of the International Water Association, which has been extended to include the co-digestion processes, using surface-based kinetics to model the organic waste disintegration and conversion to carbohydrates, proteins and lipids. When organic waste solids are present in the reactor influent, the disintegration process is the rate-limiting step of the overall co-digestion process. The main advantage of the proposed modeling approach is that the kinetic constant of such a process does not depend on the waste particle size distribution (PSD) and rather depends only on the nature and composition of the waste particles. The model calibration aimed to assess the kinetic constant of the disintegration process can therefore be conducted using organic waste samples of any PSD, and the resulting value will be suitable for all the organic wastes of the same nature as the investigated samples, independently of their PSD. This assumption was proven in this study by biomethane potential experiments that were conducted on organic waste samples with different particle sizes. The results of these experiments were used to calibrate and validate the mathematical model, resulting in a good agreement between the simulated and observed data for any investigated particle size of the solid waste. This study confirms the strength of the proposed model and calibration procedure, which can thus be used to assess the treatment efficiency and predict the methane production of full-scale digesters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Helium in Stream Water as a Volcanic Monitoring Tool

Abstract We show that synoptic sampling of streams can be used to characterize volcanic volatiles in groundwater over large spatial scales. Synoptic sampling of dissolved noble gases, 222 Rn, major ions, and stream discharge was carried out along a 30 km reach of the Gibbon River, near Norris Geyser Basin in Yellowstone National Park, USA. Groundwater discharge location, volume, and composition were estimated by constrained calibration of a stream flow and solute transport model. Estimated groundwater composition from stream modeling was compared to shallow groundwater concentrations measured in nearby springs. 3 He, 222 Rn, and Cl signatures in the Gibbon River are indicative of groundwater discharge with a volcanic signature along the study reach. Stream water noble gas isotopic composition has similar isotopic mixing patterns to springs. The model‐estimated composition of groundwater discharging to the Gibbon agrees well with observed groundwater composition from nearby springs for all modeled analytes. We present the first observations of elevated mantle helium in stream water and show that stream water can be used as a convenient collection point to estimate spatially distributed groundwater composition and to monitor changes in volatile flux over large spatial areas. These results offer the possibility that stream surveys in volcanic terrain could be a new method for distributed volcanic monitoring at the catchment scale and beyond.

Gardner, W. Payton↗

Assessing modifications to the Abdul-Razzak and Ghan aerosol activation parameterization (version ARG2000) to improve simulated aerosol–cloud radiative effects in the UK Met Office Unified Model (UM version 13.0)

The representation of aerosol activation is a key source of uncertainty in global composition-climate model simulations of aerosol–cloud interactions. The Abdul-Razzak and Ghan (ARG) activation parameterization is used in several global and regional models that employ modal aerosol microphysics schemes. In this study, we investigate the ability of the ARG parameterization to reproduce simulations with a cloud parcel model and find its performance is sensitive to the geometric standard deviations (widths) of the lognormal aerosol modes. We recommend adjustments to three constant parameters in the ARG equations, which improve the performance of the parameterization for small mode widths and its ability to simulate activation in polluted conditions. For the accumulation mode width of 1.4 used in the Met Office Unified Model (UM), the modifications decrease the mean bias in the activated fraction of aerosols compared to a cloud parcel model from −6.6 % to +1.2 %. We implemented the improvements in the UM and compared simulated global cloud droplet concentrations with satellite observations. The simulated cloud radiative effect changes by −1.43 W m −2 (6 %) and aerosol indirect radiative forcing over the industrial period changes by −0.10 W m −2 (10 %).

Ghosh, Pratapaditya [Carnegie Mellon University, P↗

Architectural Improvements and New Processing Tools for the Open XAL Online Model

The online model is the component of Open XAL providing accelerator modeling, simulation, and dynamic synchronization to live hardware. Significant architectural changes and feature additions have been recently made in two separate areas: 1) the managing and processing of simulation data, and 2) the modeling of RF cavities. Simulation data and data processing have been completely decoupled. A single class manages all simulation data while standard tools were developed for processing the simulation results. RF accelerating cavities are now modeled as composite structures where parameter and dynamics computations are distributed. The beam and hardware models both maintain their relative phase information, which allows for dynamic phase slip and elapsed time computation.

Accelerator Control↗

Annual Report for Los Alamos National Laboratory Technical Area 54, Area G Disposal Facility – Fiscal Year 2011

As a condition to the Disposal Authorization Statement issued to Los Alamos National Laboratory (LANL or the Laboratory) on March 17, 2010, a comprehensive performance assessment and composite analysis maintenance program must be implemented for the Technical Area 54, Area G disposal facility. Annual determinations of the adequacy of the performance assessment and composite analysis are to be conducted under the maintenance program to ensure that the conclusions reached by those analyses continue to be valid. This report summarizes the results of the fiscal year 2011 annual review for Area G. Revision 4 of the Area G performance assessment and composite analysis was issued in 2008 and formally approved in 2009. These analyses are expected to provide reasonable estimates of the long-term performance of Area G and, hence, the disposal facility's ability to comply with Department of Energy (DOE) performance objectives. Annual disposal receipt reviews indicate that smaller volumes of waste will require disposal in the pits and shafts at Area G relative to what was projected for the performance assessment and composite analysis. The future inventories are projected to decrease modestly for the pits but increase substantially for the shafts due to an increase in the amount of tritium that is projected to require disposal. Overall, however, changes in the projected future inventories of waste are not expected to compromise the ability of Area G to satisfy DOE performance objectives. The Area G composite analysis addresses potential impacts from all waste disposed of at the facility, as well as other sources of radioactive material that may interact with releases from Area G. The level of knowledge about the other sources included in the composite analysis has not changed sufficiently to call into question the validity of that analysis. Ongoing environmental surveillance activities are conducted at, and in the vicinity of, Area G. However, the information generated by many of these activities cannot be used to evaluate the validity of the performance assessment and composite analysis models because the monitoring data collected are specific to operational releases or address receptors that are outside the domain of the performance assessment and composite analysis. In general, applicable monitoring data are supportive of some aspects of the performance assessment and composite analysis. Several research and development (R and D) efforts have been initiated under the performance assessment and composite analysis maintenance program. These investigations are designed to improve the current understanding of the disposal facility and site, thereby reducing the uncertainty associated with the projections of the long-term performance of Area G. The status and results of R and D activities that were undertaken in fiscal year 2011 are discussed in this report. Special analyses have been conducted to determine the feasibility of disposing of specific waste streams, to address proposed changes in disposal operations, and to consider the impacts of changes to the models used to conduct the performance assessment and composite analysis. These analyses are described and the results of the evaluations are summarized in this report. The Area G disposal facility consists of Material Disposal Area (MDA) G and the Zone 4 expansion area. To date, all disposal operations at Area G have been confined to MDA G. Material Disposal Area G is scheduled to undergo final closure in 2015; disposal of waste in the pits and shafts is scheduled to end in 2013. In anticipation of the closure of MDA G, plans are being made to ship the majority of the waste generated at LANL to off-site locations for disposal. It is not clear at this time if waste that will be disposed of at LANL will be placed in Zone 4 or if disposal operations will move to a new location at the Laboratory. Separately, efforts to optimize the final cover used in the closure of MDA G are underway; a final cover design different than that adopted for the performance assessment and composite analysis will likely emerge from that investigation. All of these changes will require re-examination of the assumptions upon which the performance assessment and composite analysis are based and, in all likelihood, revision of those analyses.

54 ENVIRONMENTAL SCIENCES↗

Exploring New Physics Beyond the Standard Model: Final Technical Report

This grant in 2015 to 2016 was for support in the area of theoretical High Energy Physics. The research supported focused mainly on the energy frontier, but it also has connections to both the cosmic and intensity frontiers. Lian-Tao Wang (PI) focused mainly on signal of new physics at colliders. The year 2015 - 2016, covered by this grant, has been an exciting period of digesting the influx of LHC data, understanding its meaning, and using it to refine strategies for deeper exploration. The PI proposed new methods of searching for new physics at the LHC, such as for the compressed stops. He also investigated in detail the signal of composite Higgs models, focusing on spin-1 composite resonances in the di-boson channel. He has also considered di-photon as a probe for such models. He has also made contributions in formulating search strategies of dark matter at the LHC, resulting in two documents with recommendations. The PI has also been active in studying the physics potential of future colliders, including Higgs factories and 100 TeV pp colliders. He has given comprehensive overview of the physics potential of the high energy proton collider, and outline its luminosity targets. He has also studied the use of lepton colliders to probe fermionic Higgs portal and bottom quark couplings to the Z boson.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simulation of Damage Evolution in Composites: A Phase-field Model

First, a phase-field model for elastic-plastic solids obeying von Mises yield criterion will be described. Then, this phase-field model will be extended to simulate the damage evolution due to nucleation and growth of voids in ductile matrix for discontinuously reinforced composites. The role of reinforcement morphology and the modulus effects leading to final failure all included in the simulations in an effort to make a parametric investigation. The advantages and disadvantages of such phase-field modeling approach in comparison to well established other continuum methods will be elucidated.

36 MATERIALS SCIENCE↗

Damage mechanics modeling of the non-linear behavior of SiC/SiC ceramic matrix composite fuel cladding

A damage model is developed and validated with experimental data for the non-linear mechanical behavior of SiC/SiC composite materials in nuclear applications. The model extends a continuum damage mechanics formalism, where explicit property degradation and volumetric swelling as a result of neutron irradiation are additionally included. The model is shown to be validated with out-of-pile experiments, and then applied to off-normal and high-burnup operating conditions associated with loss of cooling and extended radiation exposure, respectively. Optimized operating conditions aimed at reducing the fuel temperature included variation of the thermal conductivity and initial fuel-cladding gap thermal resistance. The nonlinear response along with continuum micro-cracking damage predictions are obtained and compared to the behavior during normal operating conditions. Numerical implementation of the model is based on 3-D Finite Element solutions.

36 MATERIALS SCIENCE↗

Overview of Elastic Orthotropic Fiber Reinforced Polymer Modular Damage Model for Library of Advanced Materials for Engineering (LAMÉ)

This memo includes the documentation sections for the Library of Advanced Materials for Engineering (LAMÉ) manual for a fiber reinforced polymer composite damage model (Elastic_Orthotropic_FRP_Modular_Damage) in advance of the next Sierra/SM and LAMÉ release consistent with the transition of the model from development to a production capability. This new model capability provides both a set of physically based orthotropic damage criteria as well as orthotropic material softening for woven fiber reinforced polymer composite materials. The documentation sections include short sections on theory, implementation, verification, and user guidance to prescribe the model in a Sierra/SM input file.

36 MATERIALS SCIENCE↗

Heavy Flavor Hadron Molecules

We discuss the interpretation of the open charm mesons D{sub s0}{sup *}(2317), D{sub s1}(2460) and the hidden charm meson X(3872) as hadron molecules. Using a phenomenological Lagrangian approach we consider strong and radiative decays of the D{sub s0}{sup *}(2317) and D{sub s1}(2460) states. The X(3872) is assumed to consist dominantly of molecular hadronic components with an additional small admixture of a charmonium configuration. A potential model based on meson-exchange is able to generate weak binding of the molecular hadronic components. The observed radiative ({gamma}J/{psi} and {gamma}{psi}(2s)) and strong (J/{psi}2{pi} and J/{psi}3{pi}) decays are shown to be consistent with the molecular structure assumption of the X(3872).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probing Quark-Gluon Interactions with Transverse Polarized Scattering

Transverse polarized inelastic scattering extends the power of the electromagnetic interaction as a probe of nucleon dynamics beyond the leading order regime explored with longitudinally polarized DIS. In transverse polarized scattering, the twist-3 g{sub 2} spin structure function contributes at the same order as the longitudinal, twist-2, g{sub 1}, so interactions between quarks and gluons can be studied, opening a window on the mechanisms of confinement. This talk reports the results of Jefferson Lab's Resonances Spin Structure experiment measurement of g{sub 2} and the d{sub 2} twist-3 quark matrix element at a four-momentum transfer of 1.3 GeV{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Incoherent {phi} photo-production from deuteron in SPring-8/LEPS

We present measurements of differential cross sections and decay asymmetries of incoherent {phi}-meson photo-production from the deuteron at forward angles using linearly polarized photons beam in energy range from the production threshold to E = 2.4 GeV. The experiment was performed at the SPring-8/LEPS facility. The differential cross section of incoherent production shows a large suppression compared with the free proton case. The reduction for the deuteron cannot be clearly explained in terms of simple isospin asymmetry. The decay asymmetry of incoherent {phi} photo-production shows that the eta exchange process is small. Since the exclusive K{sup +}K{sup -}p cross section shows the same reduction with incoherent, both the proton and neutron cross section reduce similarly. Consequently, the {pi}-{eta} interference effect is small too. The present results suggest that our understanding of {phi} photo-production within a nucleus should be rearranged.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Binding Energies of Hyperonic Matter and Applications to Neutron Stars

The conserving nonlinear, nonchiral {sigma}-{omega}-{rho} hadronic mean-field approximation is applied to saturation properties of nuclear and hyperonic matter, properties of hadron and hadron-quark neutron stars. Nonlinear interactions are renormalized self-consistently as effective coupling constants, effective masses, and sources of equations of motion by maintaining thermodynamic consistency to the mean-field approximation. The effective masses and coupling constants become density-dependent, and they simultaneously determine binding energies and saturation properties of nuclear matter and hyperonic matter. The conserving nonlinear {sigma}-{omega}-{rho} mean-field approximation with vacuum fluctuation corrections and strange quark matter defined by the MIT-bag model were employed to examine properties of hadron-(strange) quark stars. We found that hadron-quark stars become more stable at high densities compared to pure hadronic and strange quark stars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multiple critical points in effective quark models

We consider the two-flavor version of the linear sigma model as well as of the Nambu-Jona-Lasinio model, at finite temperature and quark chemical potential, beyond the mean field approximation. Using parameter values for the pion and quark current masses which weakly break chiral symmetry, we show that both models can present more than one critical end point. In particular, we explicitly show that the appearance of a new critical point associated with a first-order line at high temperature and low densities could help to conciliate some lattice results with model predictions. Using different techniques, we perform an extensive thermodynamical analysis to understand the physical nature of the different critical points. For both models, our results suggest that the new first-order line which starts at vanishing chemical potential has a more chiral character than the usual line which displays a character more reminiscent of a liquid-gas phase transition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Meson masses and mixing angles in the 2+1 flavor Polyakov quark meson sigma model and symmetry restoration effects

The meson masses and mixing angles have been calculated for the scalar and pseudoscalar sector in the framework of the generalized 2+1 flavor Polyakov loop augmented quark meson linear sigma model. We have given the results for two different forms of the effective Polyakov loop potential. The comparison of results with the existing calculations in the bare 2+1 quark meson linear sigma model, shows that the restoration of chiral symmetry becomes sharper due to the influence of the Polyakov loop potential. We find that inclusion of the Polyakov loop in the quark meson linear sigma model together with the presence of axial anomaly, triggers an early and significant melting of the strange condensate. We have examined how the inclusion of the Polyakov loop qualitatively and quantitatively affects the convergence in the masses of the chiral partners in pseudoscalar ({pi}, {eta}, {eta}{sup '}, K) and scalar ({sigma}, a{sub 0}, f{sub 0}, {kappa}) meson nonets as the temperature is varied on the reduced temperature scale. The role of U{sub A}(1) anomaly in determining the isoscalar masses and mixing angles for the pseudoscalar ({eta} and {eta}{sup '}) and scalar ({sigma} and f{sub 0}) meson complex, has also been investigated in the Polyakov loop augmented quark meson linear sigma model. The interplay of chiral symmetry restoration effects and the setting up of U{sub A}(1) restoration trend has been discussed and analyzed in the framework of the presented model calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

{eta}-{eta}'-glueball mixing

We have revisited glueball mixing with the pseudoscalar mesons in the MIT bag model scheme. The calculation has been performed in the spherical cavity approximation to the bag using two different fermion propagators, the cavity and the free propagators. We obtain probabilities of mixing for the {eta} at the level of 0.006%-2.0%, while for the {eta}{sup '} one at the level of 0.6%-40%, depending on the choice of bag radius and, therefore, of the strong coupling constant. Our results differ from previous calculations. The origin of our difference stems from the treatment of the time integrations. The comparison of our calculation with experimental data, which is consistent with small {eta}-{eta}{sup '}-G mixing, implies that the pseudoscalar glueball is small, R{approx}0.5-0.6 fm and has a large mass, M{sub G{approx}}2000-2500 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗