Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

E-PiPEline: Face Shields and Face Coverings Using Commonly Available Materials

The Center for Disease Control has recommended that the public should wear cloth face coverings in public settings . Face coverings and face shields can be made by using Commonly Available Materials (CAMs). As part of the Sandia COVID - 19 LDRD effort (funded under the Materials Science Investment Area), the Sandia E - PiPEline task evaluated design options for face coverings and face shields considering their effectiveness, durability, build difficulty, build cost, and comfort. Observations from this investigation are presented here to provide guidelines for home construction of face coverings and face shields

54 ENVIRONMENTAL SCIENCES↗

Measuring aerosol collection efficiency for the Bladewerx “New Speclon TM 5” and the older “Speclon TM 5” filter

Bladewerx TM LLC (Rio Rancho, NM) manufactures instrumentation, neutron shielding and activation foils for the radiation protection industry. Specializing in portable alpha/beta air monitors and sample counters, Bladewerx is the source of Speclon TM PTFE filter media that they recommend for high-resolution alpha spectroscopy. Los Alamos National Laboratory (LANL) utilizes Speclon TM filter material in CAM (Continuous Air Monitor) samplers for workplace air monitoring. The LANL Aerosol Engineering Facility received air filter material from Bladewerx, referred to as “New Speclon 5” in this document, in order to distinguish from filter material that was previously received (referred to as “Speclon 5” in this document). In this document, the aerosol collection efficiency and airflow resistance (pressure drop) were measured for the New Speclon 5 filter material.

61 RADIATION PROTECTION AND DOSIMETRY↗

The Arctic LDRD project: What happened?

This presentation overviews results from the 2019 LDRD Reserve project “Diagnosing near-future changes in Arctic sea ice and ocean conditions” and a follow-up 2020 CSES Rapid Response project “Multi- Model Risk Assessment for Arctic Navigability.” We analyzed Arctic simulations from 4 CMIP6 model ensembles (E3SM, CESM-CAM, CESM-WACCM and CESM-DPLE), comparing them with observations. We then applied a machine-learning approach using copulas to produce joint probabilities of adverse conditions along potential shipping transit routes through the Arctic. Here we compare and contrast the different models and examine the utility of the copula approach applied to these data sets.

58 GEOSCIENCES↗

Assessment of Existing Capabilities and Future Needs for Designing Networked Microgrids

This is a review of existing microgrid design tool capabilities, such as the Microgrid Design Tool (MDT), LANL PNNL NRECA Optimal Resilience Model (LPNORM), Distributed Energy Resource-Customer Adoption Model (DER-CAM), Renewable Energy Optimization (REopt), and the Hybrid Optimization Model for Multiple Energy Resources (HOMER). Additionally, other simulation and analysis tools which may provide fundamental support will be examined. These will include GridLAB-DTM, OpenDSS, and the hierarchical Engine for Large-scale Infrastructure Co-Simulation (HELICS). Their applicability to networked microgrid operations will be evaluated, and strengths and gaps of existing tools will be identified. This review will help to determine which elements of the proposed optimal design and operations (OD&D) tool should be formulated from first principles, and which elements should be integrated from past DOE investments.

24 POWER TRANSMISSION AND DISTRIBUTION↗

E-PiPEline: Quick to Market Face Coverings and Face Shields Using Commonly Available Materials

The Center for Disease Control has recommended that the public should wear cloth face coverings in public settings. Face coverings and face shields can be made by using Commonly Available Materials (CAMs). As part of the Sandia COVID-19 LDRD effort (funded under the Materials Science Investment Area), the Sandia E-PiPEline task evaluated design options for face coverings and face shields considering their effectiveness, durability, build difficulty, build cost, and comfort. Observations from this investigation are presented here to provide guidelines for home construction of face coverings and face shields. This executive summary includes a brief roadmap of the analysis methodology, two one-page handouts geared to be distributed to the public at large (one for face coverings and one for face shields), and additional observations regarding potential solutions for face coverings and face shields included to further support the one-page handouts.

59 BASIC BIOLOGICAL SCIENCES↗

Negative Ion Formation in Complex Heavy Systems

The project’s primary objective is to gain a fundamental theoretical understanding of the near-threshold electron attachment mechanism in low energy electron elastic scattering from complex heavy systems through the calculation of integral and differential cross sections and extract reliable electron affinities (EAs). The complex angular momentum (CAM), also known as Regge-pole methodology wherein is fully embedded the crucial electron-electron correlations and the core polarization interaction, is used for the investigations. Regge trajectories allow us to probe electron attachment at the fundamental level near threshold, thereby uncovering new manifestations, including the mechanism of nanocatalysis, and determine reliable EAs. Low-energy electron elastic scattering total cross sections (TCSs) for the lanthanide and actinide atoms and the fullerene molecules are calculated. From the TCSs ground, metastable and excited states anionic binding energies (BEs) are extracted and compared with the available measured and/or calculated EAs. Significantly, our calculated ground state anionic BEs correspond to the theoretically challenging to calculate EAs and they are used to assess the reliability of existing EAs. Doubly charged negative ions of atoms and molecules are proposed as novel tunable catalysts and demonstrated in the oxidation of water into peroxide. Negatively charged fullerene molecules are used to catalyze water oxidation to peroxide and water synthesis from H 2 and O 2 as well. Violation of time-reversal and particle-hole symmetries in strongly correlated Fermi systems are reviewed with the collaboration involving the International Laboratory of Fermi Condensation.

74 ATOMIC AND MOLECULAR PHYSICS↗

An Evaluation of the ASM2000 software

The ASM2000 software is based on the NetCAM3 software (currently installed at RLUOB) with the main difference being enhanced multi-CAM head support. Therefore, as the NetCAM3 software has been previously tested, the current evaluation concentrated on performance related to multi-head operation. In addition, bug fixes and improvements to prior versions of the NetCAM3 code were incorporated into the ASM2000 V2.0.0 software package.

97 MATHEMATICS AND COMPUTING↗

Integrated Pest Management (IPM) for Early Detection Algal Crop Protection. Final Report

During large-scale, outdoor algal biomass growth, production strain(s) are subject to attack by pathogens, predators, and non-productive competitors, compromising the biomass yield. The project team at UCSD developed and demonstrated the effectiveness of Volatile Organic Compound, VOC, analysis via mass spectrometry (MS) as an early detection system for the presence of production algal ponds infection. The MS detection can then trigger high-resolution melt analysis (HRMA) and enhanced quantitative PCR (qPCR) to identify predatory or pathogenic species precisely. This study gathered the foundational data informing how wholly automated systems monitor the health of production ponds. By detecting the presence of low molecular weight VOCs in the air space above ponds, the instrument was able to mimic “sniffing” the health of the algae pond. This early warning system will be free growers from time-consuming and costly regular surveillance of ponds with the current techniques, such as qPCR and flow-cam assays, which are slower, less sensitive, and not easily fully automated, resulting in increased production efficiency through the reduction of crop loss. This project demonstrated that Chemical Ionization Mass Spectrometry, CIMS, could serve as a real-time monitor of ponds health tracking up to 100 different VOCs simultaneously for continuous periods up to 60 days without interruption, signaling infection within an algal crop 24 to 36 hours prior to techniques such as qPCR and microscopy. While mass spectrometry is an expensive tool, this simple VOC sampling system proved not only to be sensitive and robust but could to multiplexed to monitor several ponds, lowering the overall cost serially. This technology demonstrated a reduction in biomass production cost by approximately 50% compared to growers not employing any detection methodology.

09 BIOMASS FUELS↗

A summary of air sampler filter performance data: Bladewerx Speclon 5(TM) and Millipore FMLW047 5um

Bladewerx™ LLC (Rio Rancho, NM) manufactures instrumentation, neutron shielding and activation foils for the radiation protection industry. Specializing in portable alpha/beta air monitors and sample counters, Bladewerx is the source of Speclon 5™ PTFE filter media that they recommend for high-resolution alpha spectroscopy. Los Alamos National Laboratory (LANL) utilizes Speclon™ filter material in CAM (Continuous Air Monitor) samplers for workplace air monitoring. Millipore FMLW (5μm) filters are also used at Los Alamos, and a comparison of the two filter types has been requested. For filter face air velocities from 0.066 m/s to 1.5 m/s, the aerosol collection efficiency (for 0.3 μm particle diameters) and the filter pressure drops were measured. The FWHM (full width half maximum) of alpha spectroscopy peaks was also determined, using naturally occurring radon progeny at an alpha energy of 6 MeV.

61 RADIATION PROTECTION AND DOSIMETRY↗

Cross-Scale Land-Atmosphere Experiment (CSLAEX) (Final Report)

It is now well recognized that land-atmosphere interactions play an important role in both weather and climate. These interactions take place over a wide range of spatial and temporal scales. Most of the current formulations of the momentum, heat and moisture transport laws are informed by observations with a limited temporal or spatial scale, and hence may have limited applicability. The objective of this work is to improve the multi-scale representation of the near-surface heat transfer in the ground and in the atmosphere using a combination of modeling and field observations. Our knowledge and predictive capacity in land-atmosphere coupling is limited by our capacity to observe the full-scale spectrum at play. In order to bridge this fundamental gap in our observation capacity I will work to: create the first long-term Integrated Cross-Scale land-Atmosphere Experiment (CSLAEX) since I will work to: measure the components of the surface energy balance at a spatial scale relevant to remote sensing and meteorological applications (5km), along with observations of the nested subscale processes with Distributed Temperature Sensors (DTS). This proposal aims to fill the gaps in modeling and observing land-atmosphere interactions across scales via a novel Cross-Scale Land-Atmosphere Experiment (CSLAEX) to be implemented as part of the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site near Lamont, Oklahoma. The proposed research effort aims at exploring land-atmosphere processes across multiple spatial scales and to investigate the effect of landscape heterogeneity using Distributed Temperature Sensor measurements. The novel instrumentation of the Surface Energy Balance and simultaneous observations of the atmospheric state (boundary layer, cloud, convection) available at the DOE ARM SGP site will be used to create CSLAEX. This dataset will be used to frame and evaluate new transport laws and parameterizations for the boundary layer and the land surface, which can be implemented into the Weather and Research Forecasting (WRF) model and Community Atmospheric Model (CAM). The result of this study should impact multiple fields: meteorology, climate, and hydrology.

54 ENVIRONMENTAL SCIENCES↗

RCT Continuing Training: Radiological Emergency Response

Objectives: 1) List the revised initial response and supplemental actions while responding to a major injury inside of a radiological area; 2) List the initial response and supplemental actions while responding to a minor injury inside of a radiological area; 3) List the initial response and supplemental actions for responding to a Continuous Air Monitoring (CAM) alarm; 4) List the initial response and supplemental actions for responding to a radioactive spill; 5) List the initial response and supplemental actions of responding to an Area Radiation Monitor (ARM) alarm; 6) List the initial response and supplemental actions of an Electronic Personal Dosimeter (EPD) dose and dose rate alarm; 7) List the initial response and supplemental actions of responding to a Stationary Contamination Monitor (SCM) alarm; 8) Identify the methods to perform personnel decontamination.

61 RADIATION PROTECTION AND DOSIMETRY↗

Summary of Biomass Scale Cubical Triaxial Tester Results

Hoppers are widely used biomass handling devices that channel bulk biomass from storage to subsequent handling equipment. Jenike’s longstanding approach, based on the Mohr-Coulomb model, has been successfully used to design hoppers handling cohesionless granular materials such as grains and other agricultural produces. However, designing a hopper to ensure reliable non-grain biomass flow is found to be challenging due to cohesion, irregular particle shape, and bulk material elastoplasticity. Forest Concepts developed a Cubical Triaxial Tester (CTT) to collect data necessary to determine constitutive model coefficients appropriate for particulate biomass materials. Over the course of three years, including hundreds of data sets with a focus on low-pressure ranges relevant to gravity hopper flow of biomass feedstocks, the Forest Concepts’ CTT has proven to be a reliable method to generate data that is otherwise difficult to obtain. Coefficients for three widely used constitutive material models, i.e., Mohr-Coulomb model, modified Cam-Clay model, and Drucker-Prager/Cap model, are reported. This work was supported in part by the US Department of Energy under contract DE-EE0008254.

09 BIOMASS FUELS↗

Processing MCNP Elemental Edit Outputs

The Monte Carlo N-Particle (MCNP) transport code version 6 (also known as MCNP6) has the capability for tracking particles on unstructured mesh (UM) geometry models embedded into constructive solid geometry (CSG) cells. A UM geometry is a collection of elements representing a solid geometry. The first step of MCNP UM modeling is using other software packages to create a finite element mesh representation of a solid 3D geometry. Computer-aided design (CAD) or computer-aided manufacturing (CAM) software is typically used to create a solid geometry model, which is later imported into mesh generation software to create a UM model. The MCNP UM feature was originally designed for models generated by the Abaqus/CAE software. The MCNP code version 6.0 and later can process UM models formatted as Abaqus input files. MCNP can process a UM model consisting of several different element types including linear tetrahedral or hexahedral elements and calculate quantities of interest such as flux and energy deposition at elements. An MCNP UM simulation provides high-fidelity elemental edit (i.e., tally) outputs, which can be further used in multiphysics calculations. The MCNP UM feature was used for multiphysics simulations where quantities of interest calculated by MCNP are used as inputs for heat transfer calculations in Abaqus. MCNP6.3 can produce two types of elemental edit output (EEOUT) file formats: ASCII and HDF5. An EEOUT file type must be requested on an EMBED card while output type (flux or energy deposition) must be requested on an EMBEE card. We wrote Python3 scripts to extract energy deposition values in an ASCII or HDF5 EEOUT file and compute a heat flux profile for an Abaqus heat transfer calculation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Freezing Processes in Southern Ocean Mixed Phase Clouds (Final Technical Report)

Southern Ocean (SO) low-level clouds remain a challenge for Earth system models to represent accurately. This project utilized DOE ARM observations and the Community Atmosphere Model (CAM) to improve process-level understanding of aerosol-cloud interactions and cloud microphysics for SO mixed-phase clouds. Specifically, our efforts include two main topics: 1) investigate the SO aerosol, cloud condensation nuclei (CCN), and ice nucleating particle (INP) population based on observations and determine predictive skill of simulating SO INPs, and 2) assess the ice formation pathways, including ice nucleation and secondary ice production, in SO mixed phase clouds utilizing a combination of observations and modeling tools. Studies focused on SO aerosol and INP resulted four manuscripts. Ice formation pathways in SO mixed phase clouds were investigated, revealing observed evidence of SIP active across all mixed phase temperatures. However, a key finding of this project is that despite significant progress in predicting SO INPs, the role of INP variability in SO cloud phase, precipitation, and radiative properties remain unknown due to challenges in microphysics parameterizations.

54 ENVIRONMENTAL SCIENCES↗

Wellbore Fracture Imaging Using Inflow Detection Measurements

One of the most striking measurements taken during DOE’s EGS Collab project at the 4850-foot depth location was the so-called ‘sewer cam’, which enabled direct visualization of the flow of water into the production well through fractures during the stimulation. The ability to see directly which fractures were flowing and (roughly) how much was a breakthrough in understanding the topology of the created fracture network. Achieving this kind of fracture flow imaging at FORGE would be more challenging because of the 225°C temperature, but equally or even more valuable if it could be achieved. In 2017, a joint project between Sandia and Stanford developed a downhole tool concept to measure the enthalpy of multiphase fluid entering a geothermal well from individual fractures (Gao et al., 2017). For the FORGE project, measuring enthalpy is of less interest because the fluid is expected to be single-phase liquid water. However, the foundation of the device was the measurement of chloride ion concentration, which could form the basis for a direct measurement of inflow from fractures. During the 2017 project, this novel chloride sensing system was implemented into a laboratory test instrument, and we confirmed the capability of the system to measure the ion concentration of fluid entering a model wellbore through a small entry port. The wellbore was a 6-inch diameter model well, and the port was approximately 0.08 inch (2mm) in diameter. The device could measure the chloride concentration accurately even when the well was flowing in a bubbly flow. Given its accuracy, the tool should be able to identify locations of water entering the wellbore even if the ion concentration differs only slightly from that of the water in the well. It is likely that different fractures may flow slightly different chloride concentrations, which would make it feasible to detect individual fractures as well as to estimate the volume of their flow. Ultimately, we could also recognize different fractures flowing back significantly different ion concentrations after fracturing in the FORGE wells. This could be realized by adding different ions in the fracturing fluids in different fractures created at different stages of stimulation (and modifying the tool to include different ion specificity). Sandia’s tool was shown during the study to have the capability to withstand the 225°C temperature, and the electrochemical sensing elements were tested in the laboratory to 225°C at 1500 psia for 24 hours. An early implementation of the fully integrated downhole electrochemical tool, including high-temperature electronics, robust housing, and wireline truck interface, had previously been constructed and tested successfully at Sandia; thus, hardware development tasks focused on advancing the technology readiness level (TRL) of this promising technology for FORGE deployment, rather than on developing a new scientific basis for its operation. The data collection electronics in this tool allowed for several other sensors (pressure, temperature, flow spinner) to be implemented in parallel as well. The research was a new collaboration between Stanford and Sandia to modify and refine the tool for FORGE deployment, to make the downhole measurements, and to characterize the evolving fractures.

15 GEOTHERMAL ENERGY↗

Measuring the Aerosol Collection Efficiency and Detector Face Deposition of the Bladewerx KatanaGBM™ (Glove Box Monitor) Continuous Air Monitor

To assist Bladewerx LLC (the Requestor) in testing their new CAM (continuous air monitor) sampler model Bladewerx™ KatanaGBM™ (Glove Box Monitor), the Laboratory (LANL, i.e. Los Alamos National Laboratory) measured the aerosol particle collection efficiency and detector face deposition for several experimental test conditions. Bladewerx LLC provided a prototype KatanaGBM with a set of requested tests. According to these parameters, LANL designed and performed a series of experiments to (A.) Measure the aerosol particle collection efficiency and detector face deposition of the KatanaGBM at three air flow rates of 5, 42, and 70 ALPM (ambient liters per minute), (B.) Measure the collection efficiency and detector face deposition using two sizes of oil droplet particles: 3±1 and 10±1 µm (micron) AED (aerodynamic equivalent diameter), and (C.) Test the KatanaGBM for aerosol collection efficiency and detector face deposition with the wind tunnel’s air flow at three different angles 0°, 45° and 90° (compared to the KatanaGBM’s filter face).

61 RADIATION PROTECTION AND DOSIMETRY↗

Low Greenhouse Gas (GHG) Vehicle Technologies Research, Development, Demonstration and Deployment Topic 5 Natural Gas Engine Enabling Technologies

A 10 liter natural gas engine has been developed with significant improvements in efficiency while maintaining ultra low NOx emissions and meeting all other EPA criteria emissions limits. This was accomplished through design and analysis of performance components specifically for operation with natural gas in contrast to current production engines which are a minimally modified diesel engine that retain most diesel design features including a flat deck swirl head. The architecture developed here includes a pent roof cylinder head with tumble charge motion and cooling passages specifically optimized for effective cooling around the spark plug and valve bridges. Also in contrast to current production natural gas engines, EGR was not used, in part to avoid the initial cost and warranty expense associated with EGR systems, but also for performance benefits of faster combustion, reduced risk of misfire and high open cycle efficiency due to the turbocharger’s ability to extract energy from the high temperature exhaust. The exhaust manifold uses high temperature material and thermal mechanical fatigue analysis was completed to ensure the ability to withstand high exhaust temperatures without EGR. Other features include dual overhead cam with late intake valve closing Miller cycle and 14:1 compression ratio steel pistons. Low NOx emissions are achieved with stoichiometric combustion and application of a close coupled plus underfloor three way catalysts. The program target of peak brake thermal efficiency of 42% has been demonstrated along with bsNOx of 0.02 g/hp-hr over HD-FTP and RMCSET emissions cycles.

99 GENERAL AND MISCELLANEOUS↗

Project Planning for Community Resilience: Aquinnah and Chilmark, Massachusetts

This report presents the findings of an energy system planning study for the towns of Aquinnah and Chilmark, MA, on the island of Martha’s Vineyard, conducted under the U.S. Department of Energy ETIPP program. The study used the DER-CAM model to optimize the deployment of PV and battery microgrids to enhance energy resilience against power outages, particularly winter storms. Key findings show that PV is highly cost-effective and delivers net annual savings. However, due to limited rooftop space and low winter solar output, PV and battery storage alone cannot support the full critical load during outages. Solutions incorporating conventional backup generators were found to be more economically viable for achieving 100% critical load support.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗