SEARCH · Engineering Papers

Results for “Antennas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

NASA NTRS1971

A multiple-beam spherical reflector antenna

A spherical reflector with multiple feeds is considered for application in communications satellite systems. Data are presented which show that spherical reflectors possessing relatively high gain (40 db) and very small phase path error are feasible. A design of a spherical reflector utilizing corrugated horn feeds is considered. Radiation patterns are computed using the physical-optics technique. The designed antenna is approximately 60 lambda in diameter. Calculations performed for this antenna with three beams indicate that each beam has a gain of about 42 db, a beamwidth of 1.4 deg, and sidelobes that can be expected to be at least 28 db down. These results indicate that the feature of low sidelobes makes the spherical reflector a consideration for a multiple-beam communications satellite antenna.

Woo, R.↗

NASA NTRS1971

Antenna control system

The objective of the antenna control system is to utilize the analysis and software developed for the simulated 40 foot antenna system to produce a unified software package providing complete computer control of the 40 foot antenna. The control system comprises a position programmer, scan generator and a digital controller.

Source record↗

NASA NTRS1972

Large spacecraft antennas: Conical ring-membrane reflectors

A 1.83-m diameter furlable conical Gregorian antenna based on a novel spoke-supported ring-membrane concept has been successfully demonstrated. Mechanical measurements of the conical reflecting surface, as well as BE gain measurements at Ku-band, show an rms surface deviation from the proper conical surface of 0.3 mm and a repeatability after multiple furling-unfurling cycles of + or - 0.05 mm. Design features and performance characteristics of this antenna indicate that the spoke-supported ring-membrane concept is a promising approach for producing large, furlable, lightweight, conical reflectors for spacecraft high-gain antennas.

Oliver, R. E.↗

NASA NTRS1972

Gain calibration of a horn antenna using pattern integration

Gain measurement of a horn antenna using three different techniques is discussed. The methods include a two-antenna insertion loss measurement, a pattern integration method, and a near-field measurement method. The application of the pattern integration method is considered, as well as the evaluation of the near-field gain correction factors for the horn, which are determined by a method based directly on measured data. This method involves a spherical wave expansion of the experimental radiation pattern of the specific antenna being tested, rather than evaluation of an assumed analytical model. The spherical wave expansion is also compared to experimental near-field pattern data.

Ludwig, A. C.↗

NASA NTRS1971

Analysis and design of antennas for air traffic collision avoidance systems.

The analysis and design procedure of an antenna for a CW Doppler radar system being developed for pilot warning of midair collision hazards is presented. The antenna consists of two vertical arrays of half-wavelength dipoles mounted near a circular conducting cylinder. Each vertical array is composed of three vertical dipoles. Each array provides relatively uniform illumination (2.3 dB) in the forward 180-deg angular segment of the horizontal plane and approximately plus or minus 10 to 15 deg coverage in the vertical plane. The antenna could be used in a two-mode operation, either in a standard monopulse radar system (sum and difference amplitude patterns) or in a system where amplitude and phase are the measurable quantities.

Balanis, C. A.↗

NASA NTRS1972

Low noise microwave receiving systems on a 64 m antenna.

Review of the performance capability at S-, X- and K-band of the NASA/JPL 64-m Cassegrain antenna at Goldstone, California. The multiple feed system allows X- and K-band atmospheric research studies to be conducted simultaneously with mission directed S-band spacecraft tracking. A description of the antenna system and its multiple operation is followed by gain and efficiency comparisons at the three frequencies. The total operating system temperature and its frequency dependence are discussed. Antenna gain and efficiency, and zenith system operating temperature are summarized at S- and X-band, respectively, by 62 dB, 63%, 16K; and 72 dB, 52%, 24K. Preliminary measurements for K-band are 76 dB, 39%, 29K.

Reid, M. S.↗

NASA NTRS1972

Theoretical and experimental investigations of antennas and waves in plasma

The near field characteristics of an antenna when it is covered by a plasma sheath were investigated. The areas of investigation were: (1) current distribution, (2) input admittance, and (3) radiation pattern as functions of the electrical length of the antenna. Diagnostic measurements were also made to determine the properties of the plasma. A numerical method was evolved to solve the problem of a finite cylindrical antenna in an infinite plasma column.

Source record↗

NASA NTRS1972

Shaped Beam KU-Band Antenna Design

Antenna systems for a Ku-band synchronous orbit communications satellite were considered. A multiple beam offset feed cluster used in conjunction with an offset parabolic reflector was chosen for the antenna realization. For radiating elements in the feed array, polyrod or dielectric rod radiators fed by waveguide are investigated. Polyrod antennas shrink the cross section of the waveguide required, are fairly directive, and can be tapered to reduce sidelobes. As a consequence, it is thought that mutual coupling effects between adjacent elements will be minimal and the resultant physically small elements will allow greater packing densities for the drive elements in the feed array than would otherwise be possible.

Dudgeon, J. E.↗

NASA NTRS1973

Antenna dimensions of synthetic aperture radar systems on satellites

Design of a synthetic aperture radar (SAR) for a satellite must take into account the limitation in weight and dimensions of the antenna. The lower limits of the antenna area are derived from the conditions of unambiguity of the SAR system. This result is applied to estimate the antenna requirements for SARs on satellites in circular orbits of various altitudes around Earth and Venus.

Richter, K. R.↗

NASA NTRS1972

A foldable 4.27 meter (14 foot) spacecraft antenna

The problems and solutions associated with the design, fabrication, and testing of a large, lightweight, radial-rib, folding, spacecraft antenna reflector are discussed. The antenna reflector was designed as a highly efficient communications system for outer-planet missions extending as far as approximately 59.839 x 10 to the 11th power meters (40 astronomical units) from the sun. The methods used to obtain a lightweight precision rib surface, the evaluation and fabrication of the metallic reflector mesh surface, and the surface-evaluation techniques used on the assembled antenna reflector are included.

Starkey, D. J.↗

NASA NTRS1973

Computer simulation of space station computer steered high gain antenna

The mathematical modeling and programming of a complete simulation program for a space station computer-steered high gain antenna are described. The program provides for reading input data cards, numerically integrating up to 50 first order differential equations, and monitoring up to 48 variables on printed output and on plots. The program system consists of a high gain antenna, an antenna gimbal control system, an on board computer, and the environment in which all are to operate.

Beach, S. W.↗

NASA NTRS1973

Collapsible structure for an antenna reflector

A collapsible support for an antenna reflector for use in supporting spacecraft antennas is described. The support has a regid base and a number of struts which are pivoted at the base. The deployment of the struts and their final configuration for supporting the antenna are illustrated.

Trubert, M. R.↗

NASA NTRS1973

Computer design of antenna reflectors.

Performance of paraboloidal antenna reflectors is adversely influenced by surface distortions from a perfect paraboloid, which cause pathlength variations of the RF energy beam. The structural design objective for the surface backup structure is to minimize the rms pathlength deviations for gravity loading. Two design approaches are illustrated and applied to sample antenna structure designs. These are a sectional search method and a virtual work/Lagrange multiplier method. Both are shown to provide useful performance improvements. The second, however, appears to be more suited for application to design of large antenna structures.

Levy, R.↗

NASA NTRS1973

Astigmatism in reflector antennas.

Astigmatic phase error in large parabolic reflector antennas is discussed. A procedure for focusing an antenna and diagnosing the presence and degree of astigmatism is described. Theoretical analysis is conducted to determine the nature of this error in such antennas.

Cogdell, J. R.↗

NASA NTRS1973

Low-noise microwave receiving systems in a worldwide network of large antennas.

The Deep-Space Network (DSN) consists of a worldwide network of 26- and 64-m antennas spaced approximately 120 deg around the world. The DSN is a precision communications system designed to communicate with and control unmanned spacecraft traveling at interplanetary ranges. Recent developments in the performance and evaluation of the antennas and maser receivers are discussed, and developments which have contributed to radio-science projects, such as planetary radar astronomy, very-long-baseline interferometry, pulsar, and other astronomical observations are described. It is also shown how these radio-science measurements have been used to evaluate the performance of the antenna-receiver systems.

Reid, M. S.↗

NASA NTRS1973

Bifocal dual reflector antenna

A bifocal dual reflector antenna is similar to and has better scan capability than classical cassegrain reflector antenna. The method used in determining the reflector surfaces is a modification of a design method for the dielectric bifocal lens. The three dimensional dual reflector is obtained by first designing an exact (in geometrical optics sense) two-point corrected two dimensional reflector and then rotating it around its axis of symmetry. A point by point technique is used in computing the reflector surfaces. Computed radiation characteristics of the dual reflector are compared with those of a cassegrain reflector. The results confirm that the bifocal antenna has superior performance.

Rao, B. L. J.↗

NASA NTRS1973

Viking Lander antenna deployment mechanism

One of the mechanisms that is included in the configuration of the Viking Mars Lander is an antenna dish deployment mechanism which utilizes a mechanical escapement device for controlling deployment. The criteria require that the mechanism be capable of deploying the antenna under a wide range of aiding and retarding winds after landing on Mars but must limit the acceleration during deployment and latching of the antenna. Adding to the complexity of the design are the requirements for very accurate alignment after erection and heat sterilization prior to launch. This mechanism has been designed, fabricated and successfully tested to qualification test levels for usage on the Viking mission.

Hopper, K. H.↗

NASA NTRS1973

Conical quadreflex antenna analytical study

A method for evaluating the performance of a four-reflection or quadreflex antenna is reported. Geometrical optics was used initially to determine the ideal feed pattern required to produce uniform illumination on the aperture of the conical reflector and the reverse problem of quickly finding the aperture illumination given an arbitrary feed pattern. The knowledge of the aperture illumination makes it possible to compute the antenna efficiency, which is useful for comparing antenna performance during tradeoff studies. Scattering calculations, using physical optics techniques, were then used to more accurately determine the performance of a specific design.

Cramer, P. W., Jr.↗