Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Adsorbent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Natural attenuation of uranium in a fluvial Wetland: Importance of hydrology and speciation

A nuclear fuel fabrication facility released 43,500 kg of uranium into a riparian wetland located on the Savannah River Site between 1955 and 1988. Studies were undertaken to evaluate hydrological and geochemical processes influencing uranium accumulation in the wetland. Gamma-radiation-mapping surveys were conducted by systematically walking over the contaminated wetland with backpacks equipped with global positioning systems and NaI gamma detectors. Based on maps compiled from >700,000 gamma spectra and eight sediment uranium depth profiles, it was determined that 94% of the released uranium remained in the wetland. The uranium in the wetland is concentrated in five multi-hectare areas along the stream, accounting for ~11% of the land area adjacent to the stream. While land type (upland or wetland) and topography provided a reasonable first approximation of where much of the uranium was deposited, hydrological watershed modeling revealed that the stream velocity was especially slow through many of the hot spots. Here, using autoradiography combined with SEM/EDX measurements of contaminated sediments, surprisingly few hot particles were detected. Instead, uranium was evenly distributed throughout the sampled sediment, suggesting that dissolved uranium had bound to sediment particles that became suspended and later deposited in low energy (low flow velocity) portions of the stream. EXAFS suggested that U atoms were present as individual ions in disordered complexes within the sediment. Furthermore, linear combination analyses suggested that the predominant component of the U(VI) was adsorbed to sediment minerals (~70%) and a minor component (~30%) was associated with organic matter phases. Furthermore, these studies show that wetlands can be extraordinarily effective at binding and retaining uranium, thereby providing a natural barrier to the transport of uranium out of a watershed. However, significant anthropogenic or climatic changes to wetlands, such as those associated with flooding, forest fires, or land use, may disrupt the complex hydrological and biogeochemical balance necessary to maintain long-term immobilization of uranium.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Ammonia-based chemisorption heat pumps for cold-climate heating applications: A comprehensive review

This paper reviews the state of the art of chemisorption heat pumps that use ammonia as the refrigerant for cold-climate heating applications. In such a system, ammonia vapor is adsorbed by the solid salt through reversible chemisorption reactions, and the thermal effect of the reaction and ammonia phase change is used to extract heat from a cold environment and supply heat to a warm environment. With the high latent heat and low boiling point of ammonia as a low-temperature refrigerant and the high sorption capacity of ammonia-based chemisorption reactions, chemisorption heat pumps have the potential to produce high-efficiency heating, particularly for cold climates. This review first briefly introduces the basics of ammonia-based chemisorption heat pump systems. Then, the latest development of sorbent materials, including ammoniate salts and heat-conductive porous matrix materials, are summarized with the focus on low-temperature heating conditions. The design of system components, as well as cycle configurations, in the literature are summarized. This review concludes with highlights of recent developments on these topics and suggestions of areas for further research.

42 ENGINEERING↗
DOE OSTI2025

On the validity and limitations of 1D model for heat and mass transfer performance evaluation in a multilayer binder-free desiccant dehumidifier: isothermal dehumidification with internal cooling

Efficient humidity control is essential for maintaining indoor thermal comfort, yet conventional vapor-compression-based dehumidifiers are energy-intensive. Employing separate sensible and latent cooling through desiccant-coated heat exchangers (DCHEs) combined with evaporative coolers offers energy savings of up to 80 % compared to conventional systems. However, the dehumidification performance of DCHEs remains limited due to the use of polymer binders for coating desiccant materials onto heat exchange surfaces. In our previous study, we developed a multilayer fixed-bed binder-free desiccant dehumidifier (MFBDD) that demonstrated high dehumidification capacity and low pressure drop compared to rotary desiccant wheels. Nevertheless, its potential for further enhancement through internal cooling and the use of step-shaped adsorption isotherms has not been explored. In this study, a physics-based one-dimensional (1D) transient model is developed and validated to capture the coupled heat and mass transfer processes in the MFBDD and extended to simulate internal cooling using a high-capacity composite metal–organic framework, MIL-101/GO-6 (water uptake ≈1.6 g/g within 35–47 % RH). The model enables detailed analysis of local air and bed temperature dynamics and quantifies how internal cooling affects the dehumidification performance under a wide range of operating conditions. Results show that integrating internal cooling and using MIL-101/GO-6 enhance mass adsorbed, moisture removal capacity, and dehumidification effectiveness by 50 %–99 % compared with the M.S. Gel baseline. The study further reveals that achieving near-isothermal operation requires simultaneous enhancement of the convective heat transfer coefficient and heat exchange surface area. In conclusion, this work provides the first detailed physical insight into the interplay between internal cooling and step-shaped isotherms in a binder-free desiccant device and establishes a validated modeling framework for scaling up and system-level performance evaluation of next-generation energy-efficient dehumidification systems.

Heat and mass transfer↗
DOE OSTI2020

A plausible method of preparing the ideal p-n junction interface of a thermoelectric material by surface doping

Recent advances in two-dimensional (2D) crystals make it possible to realize an ideal interface structure that is required for device applications. Specifically, a p-n junction made of 2D crystals is predicted to exhibit an atomically well-defined interface that will lead to high device performance. Using angle-resolved photoemission spectroscopy, a simple surface treatment was shown to allow the possible formation of such an interface. Furthermore, Ta adsorption on the surface of a p-doped SnSe shifts the valence band maximum towards the higher binding energy due to the charge transfer from Ta to SnSe that is highly localized at the surface due to the layered structure of SnSe. As a result, the charge carriers of the surface are changed from holes of its bulk characteristics to electrons, while the bulk remains as a p-type semiconductor. This observation suggests that the well-defined interface of a p-n junction with an atomically thin n-region is formed between Ta-adsorbed surface and bulk.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Influence of strain on SrFeO 3-δ oxidation, reduction, and water dissociation: Insights from ambient pressure X-ray photoelectron spectroscopy

The oxidation and reduction of metal oxides and their interaction with the environment play a critical role in their use for energy storage and conversion applications. The formation of surface adsorbates and their impact on oxide electronic structure can be challenging to probe experimentally, particularly for thin films which enable the study of epitaxial strain but have low surface areas. Here we present a detailed study using ambient pressure X-ray photoelectron spectroscopy of the reduction and oxidation of strained SrFeO 3-δ , induced by changes in temperature, oxygen partial pressure, and water vapor exposure. We find that in comparison to the oxidized lattice, application of tensile strain promotes the formation of oxygen vacancies at the surface, facilitating the subsequent incorporation of oxygen into the lattice in an oxygen environment. While tensile strain does promote the formation of hydroxyls from water dissociation, the kinetics of this process appear more sluggish than on less-strained surfaces, likely due to a competitive surface interaction with oxygen or bulk absorption of hydroxyl species. These findings relating strain, oxygen vacancies, and surface reactivity yield important insight into the surface functionality of oxides for energy conversion and storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Orbital engineering of C 3 N monolayer to design efficient synergistic sites electrocatalyst for boosting alkaline hydrogen evolution

Alkaline water electrolyzer (AWE) is one of the promising technologies for hydrogen production at the industrial level. However, energetic inefficiency and low current density impede the development of AWE. Compared with acidic conditions, the Volmer step in alkaline hydrogen evolution reaction (HER) involves extra water dissociation, whose barrier is one of the most vital reasons for the sluggish kinetics of alkaline HER. Herein, choosing C 3 N monolayer as an ideal theoretical model, we design several empty orbitals through intentional metal doping, and further construct synergistic sites on the C 3 N monolayer to accelerate both water dissociation and hydrogen adsorption for alkaline HER. Furthermore, the as-designed Be-doped and Cr-doped C 3 N monolayers exhibit rather low theoretical overpotential of 0.476 eV and 0.216 eV for alkaline HER, respectively, which are even lower than Pt (1 1 1) surface. Moreover, by comparing the water dissociation behaviors on metal-doped C3N monolayer, we find that the empty orbitals with suitable orientation and energy level are useful for promoting the water dissociation process, indicating that we can use orbital engineering strategy to regulate the adsorption strength between adsorbate and surface site. Consequently, it is reasonable to suggest that our orbital engineering strategy would significantly benefit the design of highly efficient alkaline HER electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Theoretical assessments of CO 2 activation and hydrogenation pathways on transition-metal surfaces

Carbon dioxide (CO 2 ) hydrogenation on transition-metal active sites offers a promising carbon utilization route toward mitigating greenhouse gas emissions. C 1 products are often formed in parallel during CO 2 hydrogenation, prompting investigations into the intrinsic properties of transition metals that drive activity and product selectivity. Here, in this work, close-packed surfaces of a selection of transition-metal catalysts (Ni, Co, Rh, Ru, Pd, and Pt) were studied with density functional theory (DFT) calculations to understand their fundamental reactivities for CO 2 transformation reactions. Results indicate that CO 2 conversion proceeds through CO* formation and hydrogenation to form C 1 products (* denotes an adsorbed species). Ni, Co, Rh, and Ru favor CO/CH 4 formation, while Pd and Pt favor CO/CH 3 OH formation. The ability of a metal to dissociate C-O bonds drives selectivity between CH 4 and CH 3 OH, while competition between CO* desorption and surface hydrogenation describes CO selectivities. The C-O bond dissociation steps often impose the highest barrier along CH 4 formation reaction profiles, suggesting their kinetic relevance for CH 4 formation rates. The provided DFT-derived data sets detail a comprehensive reaction network of elementary steps relevant to C 1 chemistries, ultimately offering a benchmark for insights into design strategies for materials that exploit transition-metal active sites in carbon capture or utilization processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparing approaches for introducing polycyclic aromatic hydrocarbons to Ge(001) to seed graphene nanoribbon synthesis by CH 4 chemical vapor deposition

Here, we evaluate two approaches for introducing polycyclic aromatic hydrocarbons (PAHs) to a graphene catalyst substrate as part of a two-step chemical vapor deposition (CVD) process for growing graphene nanoribbons (GNRs). In this process, PAHs first form graphene-like seeds on Ge, and then GNRs are subsequently evolved from these PAH-derived seeds via substrate-mediated anisotropic growth kinetics during the CVD of CH4. The first seeding approach sublimes controlled doses of PAH thin films into the CVD chamber, while the second delivers PAHs directly from the vapor phase at set concentrations. Using these two approaches, we measure the dependence of GNR density on PAH dose and compare the experimental results with predictions from a rate model of PAH diffusion, desorption, and clustering. We find that PAHs that more strongly adsorb to the catalyst surface (generally larger PAHs) desirably remain more individualized prior to GNR evolution whereas smaller, more weakly bound PAHs aggregate into larger clusters with various sizes on Ge that are undesirable for synthesizing more monodisperse GNRs. As a result, this work is important because it offers a framework that enables the rational selection and design of seed molecules, advancing anisotropic GNR CVD synthesis.

CVD↗
DOE OSTI2026

Visualization of the surface distribution of photocatalytic activity at the anatase/rutile TiO2 interface using X-ray photoelectron emission microscopy

We applied X-ray photoelectron emission microscopy (XPEEM) to visualize the surface distribution of photocatalytic activity at the anatase/rutile (A/R) interface of titanium dioxide. Acetic acid was adsorbed on the surface, and its decomposition and desorption reactions under ultraviolet light irradiation were monitored by observing C 1s spectra, enabling direct observation of the spatial distribution of photocatalytic activity. Complementary crystal structure information was obtained using spatially resolved low-energy electron diffraction, low-energy electron microscopy, X-ray absorption spectroscopy, and micro-focused Raman spectroscopy. Comparison with these structural data allowed for the evaluation of the photocatalytic activity as a function of the distance from the A/R interface. The activity is enhanced in the vicinity of the interface and gradually decreases toward both the anatase and rutile regions. These results demonstrate that XPEEM is an effective technique for spatially resolved mapping of photocatalytic activity, which has\\r\\npreviously been inaccessible using conventional characterization techniques.

25 ENERGY STORAGE↗
DOE OSTI2021

Converting plastic waste pyrolysis ash into flash graphene

Pyrolysis of plastic waste (PW), a commercial method of recycling, is currently economically challenging and produces up to 20% by mass valueless pyrolysis ash (PA) as a byproduct. Here, direct, facile upcycling of PW-derived PA into high purity turbostratic flash graphene (tFG) is demonstrated. The tFG displays excellent dispersibility, yielding a concentration of 2.84 mg/mL in aqueous surfactant solution. The tFG was used to fabricate tFG-PVA nanocomposites, and low doses of tFG (0.1%–1%) improve failure strain by 15%–30% when compared to the samples of neat PVA. Furthermore, the addition of tFG to PVA films showed decreased hydrophilic interactions, increasing the water contact angle by 235% and adsorbing 500% less water than neat PVA. The tFG was also added to Portland cement paste as well as concrete, and exhibited 43% and 25% increases in compressive strength, respectively. The tFG is used directly in both composite applications, requiring no purification or chemical functionalization, unlike many other products used in nanocomposites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Tracking the prelude of the electroreduction of carbon monoxide via its interaction with Cu(100): Studies by operando scanning tunneling microscopy and infrared spectroscopy

The first isolable intermediate in the electrochemical reduction of carbon dioxide is carbon monoxide. This species, or its hydrated form, formic acid, is also the primary end product from all but a handful of metallic electrodes; with the latter, hydrogen gas is generated, but it emanates from the reduction of water and not from CO 2 . Only one electrode material, zerovalent copper, can spawn, in greater-than-trace quantities, a variety of species that are more highly reduced than CO. Hence, if the aim is to pursue a reaction trail of the reduction of CO 2 to products other than CO, it would be both logical and expedient to track the electrocatalytic reaction of CO itself. Heterogeneous electrocatalysis is a surface phenomenon; it transpires only when the reactant, CO in this case, chemisorbs on, or chemically interacts with, the Cu electrode surface. There is no electrocatalytic reaction if there is no CO adsorption. In ultrahigh vacuum, no CO resides on the Cu(100) surface at temperatures higher than 200 K. However, under electrochemical conditions, CO is chemisorbed on Cu at ambient temperatures at a given potential. Here, we thus paired, in seriatim fashion, scanning tunneling microscopy (STM) and polarization-modulation IR reflection-absorption spectroscopy (PMIRS) to document the influence of applied potential on the coverage, the molecular orientation, and the adlattice structure of CO adsorbed on Cu(100) in alkaline solutions; the results are described in this paper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Microwave-driven heterogeneous catalysis for activation of dinitrogen to ammonia under atmospheric pressure

This paper presents an innovative approach to producing energy-dense, carbon–neutral liquid ammonia as a means for carrying energy. This approach synergistically integrates microwave reaction chemistry with novel heterogeneous catalysis that decouples dinitrogen activation from high-temperature and high-pressure reactions, altering reaction pathways and increasing ammonia formation rate. Results presented here demonstrate that ammonia synthesis can be conducted at 280 ? and ambient pressure to achieve ~1 mmol ammonia/g cat/h over supported ruthenium catalyst systems utilizing microwave irradiation. It is further shown that adding promoter ions such as potassium, cerium, and barium significantly improves the ammonia production rate over undoped ruthenium-based catalysts. This effect could be attributed to enhanced dielectric loss processes that lead to stronger microwave absorption by the catalyst. Measurement of the equilibrium constant under microwave conditions showed a higher ammonia yield than under thermal equilibrium conditions for both the iron- and ruthenium-based catalysts. Finally, this study also illustrates the advantages of using a variable-frequency microwave reactor for ambient-pressure ammonia synthesis. Mechanistically, investigators believed that the oscillating electric fields of the radiation can couple with adsorbed nitrogen on the surface and accelerate its dissociation. Since dinitrogen dissociation on the surface is rate limiting, this effectively accelerates the reaction.

Hu, Jianli (John)↗
DOE OSTI2020

A reactive separation process for pre-combustion CO 2 capture employing oxygen-blown coal gasifier off-gas

In this paper, we present an experimental study of a reactive separation system, consisting of a membrane reactor (MR) and an adsorptive reactor (AR) operating in tandem, with the MR’s reject stream serving as the AR’s feed. We investigates the feasibility of applying this MR-AR system for high-purity H 2 production and simultaneous CO 2 capture via the water gas shift (WGS) reaction in the context of Integrated Gas Combined Cycle (IGCC) power generation employing oxygen-blown gasifier syngas from biomass and coal. We previously studied this MR-AR system for the IGCC process employing air-blown gasifier syngas, for which it demonstrated good performance, attaining high conversion exceeding equilibrium, producing ultra-pure H 2 for power generation, and a CO 2 stream ready for sequestration. In this study, we focus on oxygen-blown gasifier off-gas that contains no N 2 , with composition distinctly different from the air-blown gasifier syngas which has a large N 2 content. We employ a carbon molecular sieve membrane (CMSM), a commercial sour-shift WGS catalyst, and a hydrotalcite (HTC) adsorbent. We carried out experiments to determine membrane performance and to identify promising operating conditions in an IGCC-relevant environment. The CMSM proved robust during a long-term (~344 hr run) experimental run under high temperature and pressure maintaining a high He/N 2 selectivity (~170). Multi-cycle runs were carried out during which the MR-AR system displayed superior performance to that of a PBR, by producing a high purity H 2 product directly usable in power generation. Therefore, the findings from this study demonstrate the ability of the MR-AR system to operate stably for a broad range of gasifier off-gas compositions, and indicate its potential for integration into IGCC plants for power generation with CO 2 capture.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Highly efficient, rapid, and concurrent removal of toxic heavy metals by the novel 2D hybrid LDH–[Sn 2 S 6 ]

According to a United Nations report, by 2050 nearly six billion people worldwide will suffer from clean water scarcity. This is mostly because of the exponential proliferation of world population, urbanization, industrialization, and water pollution. Heavy metals are common water pollutants that can pose grave public health consequences. Existing water purification systems are lack of materials that have the potential for quick, simultaneous, efficient, and cost-efficient removal of numerous toxic metals from wastewater. Here, in this work, we report the design and synthesis of an economically viable Layered Double Hydroxides - Stannic Sulfide, LDH–[Sn 2 S 6 ] that exhibits a rapid, efficient, selective, and concurrent removal of Cu 2+ , Ag + , Cd 2+ , Pb 2+ , and Hg 2+ from parts per million (ppm) level to below 5 parts per billion (ppb) satisfying World Health Organization’s (WHO) safe drinking water limit. Moreover, LDH–[Sn 2 S 6 ] shows exceptionally high removal efficiencies of the above metals in acidic, neutral, and basic conditions. LDH–[Sn 2 S 6 ] also demonstrates enormous sorption capacities of 378, 978, 332, 579, and 666 mg/g for Cu 2+ , Ag + , Cd 2+ , Pb 2+ , and Hg 2+ , respectively. Remarkably, LDH–[Sn 2 S 6 ] displays extraordinary tolerance to the concentrations of Na + , Ca 2+ , Mg 2+ , Cl - , CO 3 2– , NO 3 – ,and SO 4 2- , and other constituents in tap and river water, it efficiently sequestrates Cu 2+ , Ag + , Cd 2+ , Pb 2+ , and Hg 2+ from ppm to safe drinking water levels in minutes. LDH–[Sn 2 S 6 ] shows pseudo-second-order sorption kinetics suggesting chemisorption adsorption mechanism involving M–S bonding. Altogether, the regeneratable LDH–[Sn 2 S 6 ] becomes an exceptional material that shows ultrahigh removal, unprecedented selectivity, rapid adsorption kinetics, wide pH stability, and a massive adsorption capacity. The integration of these features places LDH–[Sn 2 S 6 ] at the top of all adsorbents known to date and thus could be used for wastewater purifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydrogenolysis of n -eicosane over Ru-based catalysts in a continuous flow reactor

The hydrogenolysis of n-eicosane (C 20 H 42 ) was studied under differential conditions over Ru-based catalysts including Ru/SiO 2 , Ru/TiO 2 , and Ru/SBA-15, using a continuous flow reactor that was specially designed for large hydrocarbon reactants that are solids at room temperature. Similar rates and product distributions were obtained for Ru/SiO 2 and Ru/SBA-15 at 433 K, with the most abundant products being C 1 and C 19 hydrocarbons and smaller amounts of C 8 to C 18 also being produced. The higher yield of C 1 and C 19 indicates that cleavage of the terminal C-C bond is somewhat more facile than an internal C-C bond. At 473 K the product distribution shifted to mostly C 1 suggesting that, at this temperature, the adsorbed alkyl fragments undergo complete C-C bond scission prior to desorbing. Here, the conversion was also found to be inversely proportional to the H 2 pressure. Similar results were obtained for Ru/TiO 2 except this catalyst was found to be less active than both Ru/SiO 2 and Ru/SBA-15.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The effect of pore structure in ethane-selective metal-organic frameworks for ethylene purification

Separation of ethylene from ethane is of great importance in petrochemical industry. Adsorptive separation making use of porous materials such as metal-organic frameworks (MOFs) is an energy efficient technology compared to the conventional cryogenic distillation. However, preferential adsorption of ethylene over ethane represents the major current challenge. Here we demonstrate how pore structure can significantly alter the adsorption selectivity in two isoreticular Zr-MOFs. A simple ligand functionalization in UiO-66 yields smaller/better matching pore for ethane, and weaker interaction with ethylene, greatly enhancing ethane/ethylene selectivity in MOF-801. Ab initio calculations combined with in situ infrared spectroscopic analysis unveil the nature of host-guest interactions and differences in the overall binding energies. Polymer-grade ethylene (99.9%) can be produced directly from ethane/ethylene mixture in a single step. Having well-balanced adsorption capacity and selectivity, low-cost synthesis and easy scalability MOF-801 stands out as a promising ethane-selective adsorbent for one-step ethylene purification under ambient conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ruthenium supported on silicate and aluminosilicate mesoporous materials applied to selective sugar hydrogenation: Xylose to xylitol

A series of ruthenium-based catalysts supported on a set of silicate and aluminosilicate mesoporous molecular sieves was synthesized and tested in xylose hydrogenation. The materials were characterized in terms of morphology, textural properties, acidity, as well as ruthenium loading, dispersion, and oxidation state. In general, the aluminosilicates-based catalysts displayed a higher activity compared to their respective silicate supports, which can be ascribed to a higher Ru content and dispersion, enhanced by a higher acidity. The most active synthesized catalyst (Ru/Al-MCM-4) displayed an improved performance compared to a commercial Ru/C catalyst due to a better xylitol selectivity. Two modelling approaches were implemented to describe the kinetic rate. The first model was based on the hypothesis that xylose molecules and hydrogen are adsorbed in different active sites on the catalyst surface, while the second model supposes the formation of an intermediate on the catalyst surface that reacts to form xylitol. Both models gave a very good description of the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanistic study of direct coupling of CO 2 and C 2 H 4 over atomically dispersed metal at graphene edges

Direct coupling of CO 2 and ethylene (hereinafter DCCE) to acrylic acid is valuable for valorizing CO 2 to manufacture acrylate-derived products. However, previous studies in DCCE have been limited on molecular catalysts with challenges in improving catalytic performance. In this work, we employed density functional theory calculations and ab initio molecular dynamics simulations to investigate the heterogeneous catalysis of DCCE over atomically dispersed metal centers at nitrogen-doped zigzag edge of graphene. Based on competitive adsorption and structural stability, Mo, Cr, V, Ru, and Ni active sites are chosen to explore the reaction kinetics. Here, we find that the activation barriers are determined by the charge redistribution at transition states, which explains the trend of activity for the C-C coupling and the hydrogen transfer, two key steps in DCCE. Furthermore, we show that the intramolecular hydrogen transfer (rate-limiting step) is hindered due to the lack of local coordinate at the active sites. We thus propose to use co-adsorbed water as a “proton-exchanger” following a water-assisted route, and show that the activation barriers are reduced over all metal centers. Particularly, water promotes the hydrogen transfer over metals with strong CO 2 -ethylene co-activation and facile C-C coupling kinetics, which could be considered promising for DCCE. In both mechanisms, the stability of metallactone intermediate can be used to predict the catalytic activity. It is anticipated that the insights from this work can provide guidelines for mimicking well-defined multifunctional active sites in molecular catalysts to design heterogeneous catalysts for such C-C coupling, which advances catalytic utilization of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗