Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “APERTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Analysis of data acquired by synthetic aperture radar and LANDSAT Multispectral Scanner over Kershaw County, South Carolina, during the summer season

Data acquired by synthetic aperture radar (SAR) and LANDSAT multispectral scanner (MSS) were processed and analyzed to derive forest-related resources inventory information. The SAR data were acquired by using the NASA aircraft X-band SAR with linear (HH, VV) and cross (HV, VH) polarizations and the SEASAT L-band SAR. After data processing and data quality examination, the three polarization (HH, HV, and VV) data from the aircraft X-band SAR were used in conjunction with LANDSAT MSS for multisensor data classification. The results of accuracy evaluation for the SAR, MSS and SAR/MSS data using supervised classification show that the SAR-only data set contains low classification accuracy for several land cover classes. However, the SAR/MSS data show that significant improvement in classification accuracy is obtained for all eight land cover classes. These results suggest the usefulness of using combined SAR/MSS data for forest-related cover mapping. The SAR data also detect several small special surface features that are not detectable by MSS data.

Wu, S. T.↗

Method of measuring sea surface water temperature with a satellite including wideband passive synthetic-aperture multichannel receiver

A wideband passive synthetic-aperture multichannel receiver with an antenna is mounted on a satellite which travels in an orbit above the Earth passing over large bodies of water, e.g., the Atlantic Ocean. The antenna is scanned to receive signals over a wide frequency band from each incremental surface area (pixel) of the water which are related to the pixel's sea temperature. The received signals are fed to several channels which are tuned to separate selected frequencies. Their outputs are fed to a processor with a memory for storage. As the antenna points to pixels within a calibration area around a buoy of known coordinates, signals are likewise received and stored. Exactly measured sea temperature is received from the buoy. After passing over several calibration areas, a forward stepwise regression analysis is performed to produce an expression which selects the significant from the insignificant channels and assigns weights (coefficients) to them. The expression is used to determine the sea temperature at each pixel based on the signals received therefrom. Wind temperature, pressure, and wind speed at each pixel can also be calculated.

Stacey, J. M.↗

Astrometric plates obtained at the primary focus of large aperture reflectors

Coma, astigmatism, and great differences in stellar magnitudes between photographed object and reference stars constitute the main sources of errors in measuring positional plates. These three sources of error can easily be eliminated by the method used at the Klet Observatory for obtaining precise observations of faint objects. The astrometric plates are taken by the method of two diaphragms. The first diaphragm, with a small central aperture; is located in front of the photographic plate. The second diaphragm is situated in front of the mirror. By a very short (of the order of tens of seconds) exposure a sufficient number of reference stars can be obtained throughout the entire plate. The stars are very well defined to the very edge of the plate and are easy to measure. Moreover, this method makes it possible to use plates of larger dimensions than usual so that it is always possible to find the necessary reference stars.

Markos, A.↗

Method and apparatus for Delta Kappa synthetic aperture radar measurement of ocean current

A synthetic aperture radar (SAR) employed for delta k measurement of ocean current from a spacecraft without the need for a narrow beam and long observation times. The SAR signal is compressed to provide image data for different sections of the chirp band width, equivalent to frequencies and a common area for the separate image fields is selected. The image for the selected area at each frequency is deconvolved to obtain the image signals for the different frequencies and the same area. A product of pairs of signals is formed, Fourier transformed and squared. The spectrum thus obtained from different areas for the same pair of frequencies are added to provide an improved signal to noise ratio. The shift of the peak from the center of the spectrum is measured and compared to the expected shift due to the phase velocity of the Bragg scattering wave. Any difference is a measure of current velocity v sub o (delta k).

Jain, A.↗

Hexagonal uniformly redundant arrays for coded-aperture imaging

Uniformly redundant arrays are used in coded-aperture imaging, a technique for forming images without mirrors or lenses. The URAs constructed on hexagonal lattices, are outlined. Details are presented for the construction of a special class of URAs, the skew-Hadamard URAs, which have the following properties: (1) nearly half open and half closed (2) antisymmetric upon rotation by 180 deg except for the central cell and its repetitions. Some of the skew-Hadamard URAs constructed on a hexagonal lattice have additional symmetries. These special URAs that have a hexagonal unit pattern, and are antisymmetric upon rotation by 60 deg, called hexagonal uniformly redundant arrays (HURAs). The HURAs are particularly suited to gamma-ray imaging in high background situations. In a high background situation the best sensitivity is obtained with a half open and half closed mask. The hexagonal symmetry of an HURA is more appropriate for a round position-sensitive detector or a closed-packed array of detectors than a rectangular symmetry.

Finger, M. H.↗

Analysis of synthetic aperture radar data acquired over a variety of land cover

The results of Synthetic Aperture Radar (SAR) measurements over Kershaw County, South Carolina, using HH, HV, and VV polarization and two-incidence angle X-band airborne SAR system and over Baldwin County, Alabama, using HH polarization L-band Shuttle Imaging Radar (SIR-A) are presented. The X-band data indicate higher HH than VV radar return for cypress forest with standing water. Multipolarization (HH, HV, and VV) data help delineate several land-cover types that are difficult to delineate by the single polarization (HH) data. The L-band data indicate that radar return signal strength is highly correlated with tree height or age for three types of pine forest. It is found that delineation of urban/residential from deciduous forest is significantly improved by the inclusion of Landsat multispectral scanner data.

Wu, S.-T.↗

Registration of a synthetic aperture radar image to Thematic Mapper imagery for remote sensing applications

Multiple Thematic Mapper multitemporal acquisitions from Landsat and one synthetic-aperture radar acquisition from Seasat have been precisely registered using Johnson Space Center registration processors. The registered images have been output in the Universal Transverse Mercator projection. The procedure to accomplish such disparate data processing tasks and the registration accuracy evaluation are discussed.

Yao, S. S.↗

Potentials for change detection using Seasat synthetic aperture radar data

The use of synthetic aperture radar (SAR) images for detecting change on the earth's surface is highly dependent on target orientation, azimuth angle, and sensor depression angle. SAR data can be used for change detection when consistency is maintained in radar wavelength, polarization, azimuth directions, and off-nadir depression angle. The interaction of these parameters and the imaged surface for change detection are shown in examples drawn from (1) Los Angeles, CA, (2) southern Florida, (3) Imperial Valley, CA, (4) a desert region west of Tucson, AZ, and (5) western Kansas. SAR imagery is used to emphasize the geometric form, and roughness, of the earth's surface. As changes in the roughness of the surface occur over time, temporal SAR images will indicate those differences. Several guidelines for change detection studies using imaging radar are derived from the examples.

Bryan, M. L.↗

Solar tests of aperture plate materials for solar thermal dish collectors

If a malfunction occurs in a solar thermal point-focus distributed receiver power plant while a concentrator is pointed at the sun, motion of the concentrator may stop. As the sun moves relative to the earth, the spot of concentrated sunlight then slowly walks off the receiver aperture, across the receiver face plate, and perhaps across adjacent portions of the concentrator. Intense local heating by the concentrated sunlight may damage or destroy these parts. The behavior of various materials under conditions simulating walk-off of a parabolic dish solar collector were evaluated. Each test consisted of exposure to concentrated sunlight at a peak flux density of about 7000 kW/square meter for 15 minutes. Types of materials tested included graphite, silicon carbide, silica, various silicates, alumina, zirconia, aluminum, copper, steel, and polytetrafluroethylene. The only material that neither cracked nor melted was grade G-90 graphite. Grade CS graphite, a lower cost commercial grade, cracked half-way across, but did not fail apart. Both of these grades are medium-grain extruded graphites. A graphite cloth (graphitized polyacrylonitrile) showed fair performance when tested as a single thin ply; it might be useful as a multi-ply assembly. High purity slipcast silica showed some promise also.

Jaffe, L. D.↗

Doppler parameter estimation for spaceborne synthetic-aperture radars

Problems in the determination of Doppler parameters for spaceborne synthetic-aperture radar (SAR) data processing are examined. The degradations in image quality due to errors in these parameters are summarized. It is shown that these parameters can be estimated using accurate spacecraft ancillary data. In cases where such data are not available, two techniques are proposed to estimate these parameters using the coherent radar return. These techniques were tested with the Seasat SAR data and the test results demonstrate that the accuracies achieved exceed the system performance requirements. Possible applications of these techniques in other areas of SAR data utilization are briefly discussed.

Li, F.-K.↗

Modeling of bottom-related surface patterns imaged by synthetic aperture radar

A hydrodynamic electromagnetic model is developed in order to provide a qualitative and quantitative description of the relationship between Seasat synthetic aperture radar (SAR) signatures and the bottom topography of the ocean in the English Channel region of the North Sea. The model is based on environmental data for winds, currents, and depth changes, and the SAR parameters of frequency polarization, incidence angle, and resolution cell size. The data are used as inputs and SAR backscatter changes are predicted for individual topographic changes on the ocean floor. It is found that the model estimates of backscatter values are in good agreement with actual Seasat SAR-observed backscatter values. A comparison of the model and actual data shows agreement to be within 1.5 dB. The model is considered to be valid for only shallow water areas (less than 50 meters in depth). It is suggested that for bottom features to be visible on SAR imagery at greater depths, a moderate-to-high velocity current of at least 0.4 m/s and a moderate wind no more than 7.5 m/sec must be present.

Lyzenga, D. R.↗

Solar tests of aperture plate materials for solar thermal dish collectors

If a malfunction occurs in a solar thermal point-focus distributed receiver power plant while a concentrator is pointed at the sun, motion of the concentrator may stop. As the sun moves relative to the earth, the spot of concentrated sunlight then slowly walks off the receiver aperture, across the receiver face plate, and perhaps across adjacent portions of the concentrator. Intense local heating by the concentrated sunlight may damage or destroy these parts. The behavior of various materials under conditions simulating walk-off of a parabolic dish solar collector were evaluated. Each test consisted of exposure to concentrated sunlight at a peak flux density of about 7000 kW/square meter for 15 minutes. Types of materials tested included graphite, silicon carbide, silica, various silicates, alumina, zirconia, aluminum, copper, steel, and polytetrafluoroethylene. The only material that neither cracked nor melted was grade G-90 graphite. Grade CS graphite, a lower cost commercial grade, cracked half-way across, but did not fall apart. Both of these grades are medium-grain extruded graphites. A graphite cloth (graphitized polyacrylonitrile) showed fair performance when tested as a single thin ply; it might be useful as a multi-ply assembly. High purity slipcast silica showed some promise also.

Jaffe, L. D.↗

Adaptive Quantizer for Burst Synthetic-Aperture Radar

Adaptive quantizer for burst-mode synthetic-aperture radar reduces data rate of return signal. Device, called block floating-point quantizer (BFPQ) basically analog-to-digital converter that covers wide dynamic range and discards appropriate lower order bits. BFPQ is, in effect, digital approximator with automatic gain control. Moves floatingpoint marker binary representation of signal data in accordance with perceived dynamic range. Available step sizes thus limited to multiples of underlying smallest quantization step (represented by lowest order bit). Retains only first K most significant bits of signal; (L,K) BFPQ is one that does K-bit quantization of signal originally quantized to L bits. Quantization error simply difference between actual signal level and its binary approximation. Other potential applications for BFPQ include speech compression and picture data compression.

Joo, T. H.↗

Topographic mapping from interferometric synthetic aperture radar observations

The production of high-resolution topographic maps derived from interferometric synthetic aperture radar observations of the Earth is reported. Topographic maps are typically determined from stereo-pair optical photographs. Vertical relief causes the same terrain to appear in a slightly different projection for differing look angles, and this shift in appearance is interpreted in terms of the height of the terrain. The radar interferometric approach is related to the stereo technique in that the terrain is viewed at two different angles; however, in this case, the angular separation of the antennas is extremely small, on the order of a milliradian or less, as compared to tens of degrees for the optical case. Thus, the geometrical distortion and subsequent rectification correction algorithms are much less severe in the reduction of interferometric data.

Zebker, H. A.↗

Performance characteristics for an array of two receiving systems with equal apertures and enhanced radio frequency carrier margin improvement

Enhanced radio frequency carrier margin improvement for arrayed receiving systems for coherent reception of phase modulated signals with residual carrier provides a significant reduction in carrier loop phase noise and an increase in the signal to noise ratio in the RF carrier tracking loop with an attendant in telemetry radio loss. A significant increase in doppler frequency rate capability is also realized relative to operating at a narrower tracking loop bandwidth to obtain the same carrier sensitivity improvement. These performance characteristics are examined for an array of two receiving sysems with equal apertures and statistically independent prediction noise.

Brockman, M. H.↗

A design study for the use of a multiple aperture deployable antenna for soil moisture remote sensing satellite applications

The instrumentation problems associated with the measurement of soil moisture with a meaningful spatial and temperature resolution at a global scale are addressed. For this goal only medium term available affordable technology will be considered. The study while limited in scope, will utilize a large scale antenna structure, which is being developed presently as an experimental model. The interface constraints presented by a singel Space Transportation System (STS) flight will be assumed. Methodology consists of the following steps: review of science requirements; analyze effects of these requirements; present basic system engineering considerations and trade-offs related to orbit parameters, number of spacecraft and their lifetime, observation angles, beamwidth, crossover and swath, coverage percentage, beam quality and resolution, instrument quantities, and integration time; bracket the key system characteristics and develop an electromagnetic design of the antenna-passive radiometer system. Several aperture division combinations and feed array concepts are investigated to achieve maximum feasible performacne within the stated STS constraints.

Foldes, P.↗