Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Phase equilibrium and intermediate phases in the Eu-Sb system

Rapid heating rate thermal analysis, X-ray diffraction, fluorescence spectrometry, and differential dissolution method were used to study the high-temperature phase equilibrium in the Eu-Sb system within the composition range between 37 and 96 at% Sb. The techniques were effective in determination of the vapor-solid-liquid equilibrium since intermediate phases except Eu{sub 4}Sb{sub 3} evaporated incongruently after melting. A thermal procedure was developed to determine the liquidus and solidus lines of the T-x diagram. Six stable phases were identified: two phases, EuSb{sub 2} and Eu{sub 4}Sb{sub 3}, melt congruently at 1045{+-}10 deg. C and 1600{+-}15 deg. C, the Eu{sub 2}Sb{sub 3}, Eu{sub 11}Sb{sub 10}, Eu{sub 5}Sb{sub 4}, and Eu{sub 5}Sb{sub 3} phases melt incongruently at 850{+-}8 deg. C, 950{+-}10 deg. C, 1350{+-}15 deg. C, and 1445{+-}15 deg. C, respectively. The exact composition shifting of Sb-rich decomposable phases towards Eu{sub 4}Sb{sub 3}, the most refractory compound, was determined. The topology of the Eu-Sb phase diagram was considered together with that of the Yb-Sb system. - Graphical abstract: The high-temperature range of the T-x phase diagram for the Eu-Sb system. Highlights: > The phase relations in the Eu-Sb system were studied over a large composition and temperature scale. > The liquidus and solidus lines of the T-x diagram were well established using effective techniques. > In the system, six binary phases are stable and they melt incongruently except EuSb{sub 2} and Eu{sub 4}Sb{sub 3}. > Incongruent evaporation was found to be typical of all the phases besides Eu{sub 4}Sb{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structural characterization of the new compound UEr{sub 2}O{sub 2}S{sub 3} and the evidence for the old compound U{sub 2}ErO{sub 2}S{sub 3}

Black square plates of the new compound UEr{sub 2}O{sub 2}S{sub 3} have been synthesized by the reaction of UOS, Er, and S with an Sb{sub 2}S{sub 3} flux at 1273 K. The structure of UEr{sub 2}O{sub 2}S{sub 3} has been solved and refined from single-crystal X-ray diffraction data. UEr{sub 2}O{sub 2}S{sub 3} forms a layered structure with layers of edge-sharing ErS{sub 6} octahedra and double layers of disordered (U/Er)O{sub 4}S{sub 4} square antiprisms. Upon reexamination of the previously reported X-ray data for the U{sup 3.5+} compound U{sub 2}ErO{sub 2}S{sub 3} we conclude that it also may be characterized as the U{sup 4+} compound UEr{sub 2}O{sub 2}S{sub 3}. - Graphical abstract: The structure of UEr{sub 2}O{sub 2}S{sub 3} U/Er, black; Er, blue; O, red; S, yellow. Highlights: Black-Right-Pointing-Pointer The compound originally formulated as 'U{sub 2}ErO{sub 2}S{sub 3}' is UEr{sub 2}O{sub 2}S{sub 3}. Black-Right-Pointing-Pointer UEr{sub 2}O{sub 2}S{sub 3}, which displays U/Er disorder, charge balances as a compound of U{sup 4+}. Black-Right-Pointing-Pointer UEr{sub 2}O{sub 2}S{sub 3} has been synthesized at 1273 K, as opposed to the original synthesis that was carried out at about 1773 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The motley family of polar compounds (MV)[M(X{sub 5-x}X Prime {sub x})] based on anionic chains of trans-connected M{sup (III)}(X,X Prime ){sub 6} octahedra (M=Bi, Sb; X, X Prime =Cl, Br, I) and methylviologen (MV) dications

The search for hybrid organic-inorganic materials remains a great challenge in the field of ferroelectrics. Following the discovery of the room temperature ferroelectric material (MV)[BiI{sub 3}Cl{sub 2}] (MV{sup 2+}: methylviologen) exhibiting the highest polarization value in the field of hybrid ferroelectrics, we report here nine new hybrids with the general formulation (MV)[M{sup (III)}X{sub 5-x}X Prime {sub x}] (M=Bi, Sb; X, X Prime =Cl, Br, I): (MV)[BiCl{sub 3.3}Br{sub 1.7}] (1), (MV)[BiCl{sub 1.3}Br{sub 3.7}] (2), (MV)[BiBr{sub 3.2}I{sub 1.8}] (3), (MV)[SbCl{sub 5}] (4), (MV)[SbBr{sub 5}] (5), (MV)[SbCl{sub 3.8}Br{sub 1.2}] (6), (MV)[SbCl{sub 2.4}Br{sub 2.6}] (7), (MV)[SbI{sub 3}Cl{sub 2}] (8) and (MV)[SbBr{sub 3.8}I{sub 1.2}] (9). Depending on the presence of polar chains or not, and on the coupling of polar chains, two types of centrosymmetrical structures [C1] and [C2] and two types of polar structures [P1] and [P2] are defined. (2) undergoes a paraelectric-to-relaxor ferroelectric transition around 100-150 K depending of the frequency showing that the Curie temperature, T{sub C}, of (MV)[BiBr{sub 5}] (243 K) can be modulated by the substitution of Br by Cl. The most interesting family is the [P2] type because the syn coupling of polar chains is in favor of high polarization values, as in (MV)[BiI{sub 3}Cl{sub 2}]. Five of the nine new hybrids, (4), (6-9), which have the [P2] type structure are potential ferroelectrics. - Graphical abstract: The methylviologen haloantimonate (MV)[SbX{sub 5-x}X Prime {sub x}] families (X, X Prime =Cl, Br, I) - [P1] and [P2] are the two kinds of polar structures - and view of the (MV)[SbBr{sub 3.8}I{sub 1.2}] hybrid based on chiral polar chains which are in syn coupling. Highlights: Black-Right-Pointing-Pointer Nine hybrids based on methylviologen and halometalate chains have been discovered. Black-Right-Pointing-Pointer The polar nature of chains is due to the ns{sup 2} stereoactivity of Sb{sup (III)} or Bi{sup (III)}. Black-Right-Pointing-Pointer A syn or anti coupling of polar chains leads to two types of polar structures. Black-Right-Pointing-Pointer Five of the nine hybrids (syn coupling) are potential interesting ferroelectrics. Black-Right-Pointing-Pointer The para-to-ferroelectric T{sub C} depends on the bromide content x of (MV)[BiCl{sub 5-x}Br{sub x}].

36 MATERIALS SCIENCE↗

Thermoelectric properties of Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} single crystals with magnetic impurities

Temparature dependence of Seebeck coefficients S, electrical conductivity, heat conductivity k and dimensionless thermoelectric figure of merit ZT of p-Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and n-Bi{sub 2}Se{sub 3}-doped by Fe or Cr were carried out in the temperature interval 7 150 K. - Graphical abstract: Temparature dependence of Seebeck coefficients S, electrical conductivity {sigma}, heat conductivity k and dimensionless thermoelectric figure of merit ZT of p-Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and n-Bi{sub 2}Se{sub 3} doped by Fe or Cr were measured in the temperature interval 7 150 K up to ZT=0.4 as shown in figure. Highlights: Black-Right-Pointing-Pointer Fe and Cr act as donors in Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3.} Black-Right-Pointing-Pointer The Seebeck coefficient increases in p-Bi{sub 2-x}Fe{sub x}Te{sub 3} and Sb{sub 2-x}Cr{sub x}Te{sub 3}. Black-Right-Pointing-Pointer Dimensionless figure of merit ZT increased up to 0.4 in Cr-doped Sb{sub 2}Te{sub 3} at T=300 K.

36 MATERIALS SCIENCE↗

Influence of nanoinclusions on scattering of holes and phonons and transport coefficients in Bi{sub x}Sb{sub 1-x}Te{sub 3} bulk nanostructures

One of the possible ways to increase the thermoelectric figure of merit is the use of bulk nanostructured materials fabricated by melt spinning with subsequent hot pressing or spark plasma sintering. Among a variety of nanostructure types these materials contain regions of initial solid solution with nanometer sized inclusions of different compositions. In the present work the scattering of holes and phonons on nanoinclusions in such p-Bi{sub x}Sb{sub 1-x}Te{sub 3} based materials is considered. The change of transport coefficients due to this scattering mechanism is theoretically estimated. The estimations showed that the reduction of lattice thermal conductivity (about 12-13%) for nanoinclusions of Bi{sub 2}Te{sub 3}-Sb{sub 2}Te{sub 3} solid solution with different compositions is much greater than the change in power factor. Therefore the corresponding increase of the thermoelectric figure of merit for this case is determined mainly by phonon scattering. Also it is shown that the results of estimations depend on phonon spectrum approximation, e.g. in the case of sine-shaped instead of linear phonon spectrum the estimations give two times higher thermal conductivity reduction. - Graphical abstract: Relative phonon thermal conductivity {kappa}{sub ph} change (black line) due to nanoinclusion scattering versus nanoinclusion radius a, and relative thermoelectric power factor change (red line) due to nanoinclusion scattering versus chemical potential {mu} at nanoinclusion size a=1.5 nm and U{sub 0}=-0.146 eV. Highlights: Black-Right-Pointing-Pointer p-Bi{sub x}Sb{sub 1-x}Te{sub 3} solid solutions with nanosized inclusions were considered. Black-Right-Pointing-Pointer Selective hole scattering can increase power factor at high carrier concentrations. Black-Right-Pointing-Pointer Lattice thermal conductivity estimations depend on phonon spectrum approximation. Black-Right-Pointing-Pointer Phonon scattering can reduce lattice thermal conductivity by about 12-13%. Black-Right-Pointing-Pointer The latter factor mainly determines the increase of thermoelectric efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and magnetic properties of La{sub 3}Co{sub 2}SbO{sub 9}: A double perovskite with competing antiferromagnetic and ferromagnetic interactions

The synthesis, structural characterization, and magnetic properties of La{sub 3}Co{sub 2}SbO{sub 9} double perovskite are reported. The crystal structure has been refined by X-ray and neutron powder diffraction data in the monoclinic space group P2{sub 1}/n. Co{sup 2+} and Sb{sup 5+} have the maximum order allowed for the La{sub 3}Co{sub 2}SbO{sub 9} stoichiometry. Rietveld refinements of powder neutron diffraction data show that at room temperature the cell parameters are a=5.6274(2) A, b=5.6842(2) A, c=7.9748(2) A and {beta}=89.999(3) Degree-Sign . Magnetization measurements indicate the presence of ferromagnetic correlations with T{sub C}=55 K attributed to the exchange interactions for non-linear Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} paths. The effective magnetic moment obtained experimentally is {mu}{sub exp}=4.38 {mu}{sub B} (per mol Co{sup 2+}), between the theoretical one for spin only (3.87 {mu}{sub B}) and spin-orbit value (6.63 {mu}{sub B}), indicating partially unquenched contribution. The low magnetization value at high magnetic field and low temperature (1 {mu}{sub B}/f.u., 5 T and 5 K) and the difference between ZFC and FC magnetization curves (at 5 kOe) indicate that the ferromagnetism do not reach a long range order and that the material has an important magnetic frustration. - Graphical abstract: Co-O-Co (Yellow octahedra only) rich zones (antiferromagnetic) are in contact with Co-O-Sb-O-Co (Red and yellow octahedra) rich zones (Ferromagnetic) to give the peculiar magnetic properties, as a consequence, a complex hysteresis loop can be observed composed by a main and irreversible curve in all the measured range, superimposed with a ferromagnetic component at low fields. Highlights: Black-Right-Pointing-Pointer La{sub 3}Co{sub 2}SbO{sub 9} has small Goldschmidt Tolerance Factor (t) due to the small size of La{sup 3+}. Black-Right-Pointing-Pointer Small t determines an angle for the path Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} of 153 Degree-Sign . Black-Right-Pointing-Pointer Ferromagnetism is attributed to exchange interactions for Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} paths. Black-Right-Pointing-Pointer Ferromagnetic nanoclusters are embedded in an antiferromagnetic matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sb₂S₃ surface modification induced remarkable enhancement of TiO₂ core/shell nanowries solar cells

This study presents the fabrication of a novel dye-sensitized solar cell with Sb₂S₃-modified TiO₂ nanowire (NW) arrays/TiO₂ nanoparticles (NP) (TiO₂(NWs)/TiO₂(NPs)/Sb₂S₃) as the anodes and N719 dye as the sensitizer. A solar conversion efficiency of 4.91% at 1 sun illumination was achieved for the composite cell, which is markedly higher than the efficiency rates obtained using TiO₂ and TiO₂(NWs)/Sb₂S₃/TiO₂(NPs) NW cells, calculated at 2.36% and 3.11%, respectively. The improved efficiency results from the large surface area of the NPs, as well as the expansion of the light absorption region and high absorption coefficient by Sb₂S₃ surface modification. - Graphical abstract: A novel TiO₂(NWs)/TiO₂(NPs)/Sb₂S₃ dye sensitized solar cells (DSSCs) is fabricated, a solar conversion efficiency of 4.91 % at 1 sun illumination is achieved. Highlights: • We fabricate sandwich structured TiO₂ dye-sensitized solar cells. • The anode of the solar cells consist of Sb₂S₃ modified TiO₂ nanowire arrays/TiO₂ nanopartices. • A solar conversion efficiency of 4.91% at 1 sun illumination is achieved. • The high efficiency results from large surface area and expanded light adsorption of the anode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The site-selective excitation and the dynamical electron–lattice interaction on the luminescence of YBO₃: Sb³⁺

The phosphor of YBO₃: Sb³⁺ was synthesized by solid state reaction. Its crystal structure was examined by using X-ray diffraction analysis. The morphology and particle size were characterized with a scanning electron microscopy. The properties of YBO₃: Sb³⁺ luminescence was systematically studied by exciting borate host, the ¹P₁ and ³P₁ levels of Sb³⁺ at the Cᵢ and C₁ sites with 168, 203, 218, 252 and 262 nm, respectively, measured on the synchrotron radiation instruments. The different configurations of emission spectra excited with variant wavelengths show the character of wavelength-selective excitation, which was attributed to different occupations of the Sb³⁺ site in the YBO₃ crystal lattice. Moreover, strong electron–lattice interaction (i.e., the Jahn–Teller effect) between Sb³⁺ and YBO₃ host was discriminated by comparing low temperature and room temperature spectra. The site-selective luminescence was confirmed by YBO₃ activated with multiple Sb³⁺concentrations. The spectral assignment was verified with fluorescence lifetime achieved by using the Time-Correlated Single-Photon Counting method. - Graphical abstract: The dynamical Jahn–Teller effect (electron–lattice interaction) between Sb³⁺ and YBO₃ host was revealed from hyperfine structure in excitation spectra measured on the synchrotron radiation instruments combined with cryogenic technique. Highlights: • The site-selective excitation of YBO₃: Sb³⁺ was demonstrated. • The temperature-dependent luminescence of YBO₃: Sb³⁺ was observed. • Strong electron–lattice interaction between the Sb³⁺and YBO₃ host was revealed. • Superposition of the Jahn–Teller effect and site-selective excitation was discriminated. • Optical parameters were calculated by using a molecular orbital approximation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermoelectric properties of composites made of Ni{sub 0.05}Mo{sub 3}Sb{sub 5.4}Te{sub 1.6} and fullerene

About 18 g of Ni{sub 0.05}Mo{sub 3}Sb{sub 5.4}Te{sub 1.6} were prepared by heating the elements in the stoichiometric ratio at 1000 K. The product was divided into four parts, and then C{sub 60} was added to three of these four parts at 1, 2, and 3 mass%, respectively. Each part was hot-pressed at 150 MPa and 923 K. The sample with 1% C{sub 60} was characterized via a Rietveld refinement and TEM analyses. Measurements of the three thermoelectric key properties revealed that the Seebeck coefficient barely depends on the carbon amount added, while both the electrical and the thermal conductivity decrease with increasing amount of carbon. Depending on the amount of C{sub 60} used and on the temperature, the thermoelectric performance was either enhanced or decreased, depending on whether the electrical conductivity decreased less or more than the thermal conductivity. At the highest temperature measured, all carbon-containing samples performed better than the unmodified bulk sample, namely up to 14%. These improvements are within the error margin, however. - Graphical abstract: Figure-of-merit of various Ni{sub 0.05}Mo{sub 3}Sb{sub 5.4}Te{sub 1.6}/C composites. - Highlights: • Composites of Mo{sub 3}(Sb,Te){sub 7} materials with C{sub 60} were synthesized and characterized. • The carbon additions form amorphous nanoparticles with sizes of the order of 50 nm. • The Seebeck effect remains basically unaffected from the carbon additions. • Electrical and thermal conductivity decrease differently with increasing carbon content. • The figure-of-merit was slightly improved, most noteworthy at higher temperatures.

36 MATERIALS SCIENCE↗

A p → n transition for Sn-doped Cu(In,Ga)Se{sub 2} bulk materials

Cu(In,Ga)Se{sub 2} (CIGSe) pellets at different Sn contents were fabricated by reactive liquid-phase sintering at 600–700 °C with the help of sintering aids of Sb{sub 2}S{sub 3} and Te. Powder preparation was based upon the molecular formula of Cu{sub 0.9}[(In{sub 0.7−x}Sn{sub x}Ga{sub 0.3}){sub 0.9}Sb{sub 0.1}](S{sub 0.15}Te{sub 0.2}Se{sub 1.65}) or Sn-x-CIGSe. Morphology, structure, and electrical property of Sn-doped CIGSe bulks were investigated. The composition of Sn-doped CIGSe is purposely designed for studying the doping effect on the CIGSe performance. The unexpected increase in hole concentration of CIGSe due to the donor doping is rationalized. A controllable n-type semiconductor is deliberately achieved for Sn-0.15-CIGSe and important for making a p/n homojunction in CIGSe solar cells. - Graphical abstract: The controls in defect type and electrical properties of Cu(In,Ga)Se{sub 2} by doping Sn{sup 4+} on the In{sup 3+} site. Highlights: • n-type Sn-CIGSe with n{sub e} of 6.4×10{sup 16} cm{sup −3} and μ{sub e} of 2.3 cm{sup 2}/V s was obtained. • This n-type Sn-CIGSe was obtained by material design and composition control. • The reported n-type CIGSe was obtained from the Zn/CIGSe and CdS/CIGSe bilayers. • Extrinsic donor doping was explored through the results of electrical properties. • A n/p homojunction with Sn-CIGSe and undoped one can be used for solar cell devices.

36 MATERIALS SCIENCE↗

A high-pressure route to thermoelectrics with low thermal conductivity: The solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2} (x=0.1–0.6)

Metastable rocksalt-type phases of the solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2} (x=0.1, 0.2, 0.4, 0.5 and 0.6) were prepared by high-pressure synthesis at 2.5 GPa and 400 °C. In these structures, the coordination number of In{sup 3+} is six, in contrast to chalcopyrite ambient-pressure AgInTe{sub 2} with fourfold In{sup 3+} coordination. Transmission electron microscopy shows that real-structure phenomena and a certain degree of short-range order are present, yet not very pronounced. All three cations are statistically disordered. The high degree of disorder is probably the reason why AgIn{sub x}Sb{sub 1−x}Te{sub 2} samples with 0.4<x<0.6 exhibit very low thermal conductivities with a total κ<0.5 W/K m and a lattice contribution of κ{sub ph} ∼0.3 W/K m at room temperature. These are lower than those of other rocksalt-type tellurides at room temperature; e.g. the well-known thermoelectric AgSbTe{sub 2} (κ ∼0.6 W/K m). The highest ZT value (0.15 at 300 K) is observed for AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}, mainly due to its high Seebeck coefficient of 160 µV/K. Temperature-dependent X-ray powder patterns indicate that the solid solutions are metastable at ambient pressure. At 150 °C, the quaternary compounds decompose into chalcopyrite-type AgInTe{sub 2} and rocksalt-type AgSbTe{sub 2}. - Graphical abstract: Reaction scheme, temperature characteristics of the ZT value and a selected-area electron diffraction pattern (background) of AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}, which crystallizes in a rocksalt-type structure with statistical cation disorder. Display Omitted - Highlights: • High-pressure synthesis yields the novel solid solution series AgIn{sub x}Sb{sub 1−x}Te{sub 2}. • In contrast to AgInTe{sub 2}, the compounds are inert at ambient pressure. • HRTEM shows no pronounced short-range order in the disordered NaCl-type structure. • The metastable phases exhibit very low total thermal conductivities <0.5 W/K m. • ZT values of 0.15 at room temperature were measured for AgIn{sub 0.5}Sb{sub 0.5}Te{sub 2}.

36 MATERIALS SCIENCE↗

Hole mobility enhancement of Cu-deficient Cu{sub 1.75}Zn(Sn{sub 1−x}Al{sub x})Se{sub 4} bulks

Cu-deficient Cu{sub 1.75}ZnSn{sub 1−x}Al{sub x}Se{sub 4} (x=0–0.6) bulks were prepared by a liquid-phase reactive sintering method at 600 {sup °}C with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring electrical properties of Al-doped CZTSe as a function of dopant concentration. Al-CZTSe pellets at x=0.4 with electrical conductivity of 57.2 S cm{sup −1} showed the highest hole mobility of 32.5 cm{sup 2} V{sup −1} s{sup −1}. The high mobility is mainly contributed from the low atomic scattering factor of Al. The high carrier concentration and slightly changed lattice parameter of Al-CZTSe are related to the types of its defects. - Graphical abstract: The controls in electrical properties and the changes in lattice parameters of Cu-deficient Cu{sub 2}ZnSnSe{sub 4} by doping Al{sup 3+} on the Sn{sup 4+} site. Display Omitted - Highlights: • Cu-deficient Cu{sub 1.75}Zn(Sn{sub 1−x}Al{sub x})Se{sub 4} was prepared by liquid-phase sintering at 600 °C. • Sintering aids of Sb{sub 2}S{sub 3} and Te were used for reactive sintering. • Al-CZTSe at x=0.4 showed the extremely high mobility of 32.5 cm{sup 2} V{sup −1} s{sup −1}. • Al-CZTSe reached large grains of 2−3 μm, while it was <1.0 μm for the undoped. • Electrical properties of Al-CZTSe pellets changed with the Al content.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structural and magnetic characterization of the frustrated magnetic system La{sub 2}Ni{sub 4/3−x}Co{sub x}Sb{sub 2/3}O{sub 6}

We report the synthesis of double perovskites La{sub 2}Ni{sub 4/3−x}Co{sub x}Sb{sub 2/3}O{sub 6} with x=0, 1/3, 2/3 and 1 by a solid state method. Rietveld refinements of X-ray and neutron powder diffraction data show that all samples crystallize in space group P2{sub 1}/n, with almost perfect occupation of the 2d octahedral site with the transition metals, while all Sb{sup 5+} are randomly distributed in a 2c octahedral site. The saturation magnetization in hysteresis loops indicates that the samples are ferrimagnetic throughout all the series. Virgin magnetization curves lie outside hysteresis loops at low temperatures and thermal evolution of H{sub m} – defined as the inflection point of these curves – follows the de Almeida–Thouless dependence for x≠0. This spin glass like behavior below 30 K is also supported by thermal evolution of the coercivity, which follows an exponential law typical of magnetic clusters, not found in the pure Ni{sup 2+} perovskite, x=0 extreme. - Graphical abstract: Display Omitted - Author-Highlights: • We synthesized new double perovskites: La{sub 2}Ni{sub 4/3−x}Co{sub x}SbO{sub 6} (x=1/3, 2/3, 1). • The cations occupying octahedral sites are highly ordered in all samples. • Magnetic transition occurs as a consequence of superexchange paths. • Frustration is found and attributed to competition between different interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis and structural characterization of an organic–inorganic hybrid sandwich-type tungstoantimonate [Cu(en){sub 2}(H{sub 2}O)]{sub 4}[Cu(en){sub 2}(H{sub 2}O){sub 2}][Cu{sub 2}Na{sub 4}(α-SbW{sub 9}O{sub 33}){sub 2}]·6H{sub 2}O

An organic–inorganic hybrid sandwich-type tungstoantimonate [Cu(en){sub 2}(H{sub 2}O)]{sub 4}[Cu(en){sub 2}(H{sub 2}O){sub 2}][Cu{sub 2}Na{sub 4}(α-SbW{sub 9}O{sub 33}){sub 2}]·6H{sub 2}O (1) has been synthesized by reaction of Sb{sub 2}O{sub 3}, Na{sub 2}WO{sub 4}·2H{sub 2}O, CuCl{sub 2}·2H{sub 2}O with en (en=ethanediamine) under hydrothermal conditions and structurally characterized by elemental analysis, inductively coupled plasma atomic emission spectrometry, IR spectrum and single-crystal X-ray diffraction. 1 displays a centric dimeric structure formed by two equivalent trivacant Keggin [α-SbW{sub 9}O{sub 33}]{sup 9−} subunits sandwiching a hexagonal (Cu{sub 2}Na{sub 4}) cluster. Moreover, those related hexagonal hexa-metal cluster sandwiched tungstoantimonates have been also summarized and compared. The variable-temperature magnetic measurements of 1 exhibit the weak ferromagnetic exchange interactions within the hexagonal (Cu{sub 2}Na{sub 4}) cluster mediated by the oxygen bridges. - Graphical abstract: An organic–inorganic hybrid (Cu{sub 2}Na{sub 4}) sandwiched tungstoantimonate [Cu(en){sub 2}(H{sub 2}O)]{sub 4}[Cu (en){sub 2}(H{sub 2}O){sub 2}][Cu{sub 2}Na{sub 4}(α-SbW{sub 9}O{sub 33}){sub 2}]·6H{sub 2}O was synthesized and magnetic properties was investigated. Display Omitted - Highlights: • Organic–inorganic hybrid sandwich-type tungstoantimonate. • (Cu{sub 2}Na{sub 4} sandwiched) tungstoantimonate [Cu{sub 2}Na{sub 4}(α-SbW{sub 9}O{sub 33}){sub 2}]{sup 10−}. • Ferromagnetic tungstoantimonate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The layered antimonides RELi{sub 3}Sb{sub 2} (RE=Ce–Nd, Sm, Gd–Ho). Filled derivatives of the CaAl{sub 2}Si{sub 2} structure type

Reported are the synthesis and the structural characterization of an extended family of rare-earth metal–lithium–antimonides with the formula RELi{sub 3}Sb{sub 2} (RE=Ce–Nd, Sm, Gd–Ho). They crystallize in the trigonal space group P3{sup ¯}m1 (No. 164, Pearson symbol hP6) with a structure, best viewed as a filled derivative of the common CaAl{sub 2}Si{sub 2} structure type (ternary variant of α-La{sub 2}O{sub 3}). Across the series, the lattice parameters monotonically decrease, following the lanthanide contraction. Temperature-dependent magnetic susceptibility measurements for CeLi{sub 3}Sb{sub 2}, PrLi{sub 3}Sb{sub 2} and TbLi{sub 3}Sb{sub 2} reveal paramagnetic behavior in the high temperature range, and the obtained effective moments are consistent with the expected ones for the free-ion RE{sup 3+} ground state. Possible ferromagnetic ordering for PrLi{sub 3}Sb{sub 2} and antiferromagnetic ordering for TbLi{sub 3}Sb{sub 2} are observed in the low temperature range (below 20 K). Tight-binding muffin-tin orbital electronic band structure calculations for LaLi{sub 3}Sb{sub 2} are presented and discussed as well. - Graphical abstract: The large family of rare-earth metal–lithium–antimonides with the formula RELi{sub 3}Sb{sub 2} (RE=Ce–Nd, Sm, Gd–Ho) crystallize in the trigonal space group P3{sup ¯}m1 (No. 164, Pearson symbol hP6) with a structure that is a filled derivative of the CaAl{sub 2}Si{sub 2} structure type (ternary variant of α-La{sub 2}O{sub 3}). Display Omitted - Highlights: • RELi{sub 3}Sb{sub 2} (RE=Ce–Nd, Sm, Gd–Ho) constitute an extended family of rare-earth metal–lithium–antimonides. • The layered structure is a filled derivative of the common CaAl{sub 2}Si{sub 2} structure type. • The valence electron count follows the Zintl–Klemm rules. • Electronic band structure calculations for LaLi{sub 3}Sb{sub 2} indicate small band-gap semiconducting behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Ag{sub 2}Sb{sub 2}O{sub 6} to Cd{sub 2}Sb{sub 2}O{sub 7}: Investigations on an anion-deficient to ideal pyrochlore solid solution

A complete solid solution between the anion-deficient pyrochlore Ag{sub 2}Sb{sub 2}O{sub 6} and the ideal pyrochlore Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized through the standard solid state ceramic method. Each composition has been characterized by various different techniques, including powder X-ray diffraction, optical spectroscopy, electron paramagnetic resonance and {sup 121}Sb Mössbauer spectroscopy. Computational methods based on density functional theory complement this investigation. Photocatalytic activity has been studied, and transport properties have been measured on pellets densified by spark plasma sintering. The analysis of the data collected from these various techniques enables a comprehensive characterization of the complete solid solution and revealed an anomalous behavior in the Cd-rich end of the solid solution, which has been proposed to arise from a possible radical O{sup −} species in small concentrations. - Graphical abstract: A complete solid solution between the anion-deficient pyrochlore Ag{sub 2}Sb{sub 2}O{sub 6} and the ideal pyrochlore Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized and investigated through various techniques including X-ray diffraction, electron paramagnetic spectroscopy, and {sup 121}Sb-Mössbauer spectroscopy. Optical and electrical measurements have been performed, and computational methods have been applied to determine the density of states. Photocatalytic activity was monitored by the degradation of Methylene Blue, and upon cadmium substitution, the degradation amount decreased, which is attributed primarily to the changing optical and electrical properties of the solid solution. Display Omitted - Highlights: • A complete solid solution between Ag{sub 2}Sb{sub 2}O{sub 6} and Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized. • XRD reveals a relatively constant lattice parameter as the series progresses. • Optical and electrical properties have been measured for the solid solution. • Computational methods have been used to determine the density of states. • Photocatalytic degradation of Methylene Blue decreased upon cadmium substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructured rocksalt-type solid solution series (Ge{sub 1−x}Sn{sub x}Te){sub n}Sb{sub 2}Te{sub 3} (n=4, 7, 12; 0≤x≤1): Thermal behavior and thermoelectric properties

Solid solutions (Ge{sub 1−x}Sn{sub x}Te){sub n}Sb{sub 2}Te{sub 3} (n=4, 7, 12; 0≤x≤1) represent stable high-temperature phases and can be obtained as metastable compounds by quenching. High-resolution transmission electron microscopy reveals that the quenched (pseudo-)cubic materials exhibit parquet-like nanostructures comparable to, but especially for n=4 more pronounced than in (GeTe){sub n}Sb{sub 2}Te{sub 3} (GST materials). The temperature-dependent phase transitions are comparable; however, substitution with Sn significantly lowers the transition temperatures between cubic high-temperature phase and the long range ordered layered phases that are stable at ambient conditions. In addition, the metrics of the quenched Sn-containing materials remains closer to cubic, especially for samples with n=7 or 12. For samples with high defect concentrations (n=4, 7), Sn-substituted samples exhibit electrical conductivities up to 3 times higher than those of corresponding GST materials. Since the difference in thermal conductivity is much less pronounced, this results in a doubling of the thermoelectric figure of merit (ZT) at high temperatures for (Ge{sub 0.5}Sn{sub 0.5}Te){sub 4}Sb{sub 2}Te{sub 3} as compared to (GeTe){sub 4}Sb{sub 2}Te{sub 3}. Sn doping in (GeTe){sub 7}Sb{sub 2}Te{sub 3} increases the ZT value by a factor of up to 4 which is also due to an increased Seebeck coefficient. - Graphical abstract: High-resolution transmission electron micrographs of (GeTe){sub 4}Sb{sub 2}Te{sub 3} (top) and (Ge{sub 0.5}Sn{sub 0.5}Te){sub 4}Sb{sub 2}Te{sub 3} (bottom) with different nanostructures and thermoelectric figures of merit (ZT) of these samples. - Highlights: • Representative samples of solid solutions of (Ge{sub 1−x}Sn{sub x}Te){sub n}Sb{sub 2}Te{sub 3} were synthesized. • Sn substitution leads to more pronounced nanostructures in defect-rich compounds. • Phase transitions are comparable to (GeTe){sub n}Sb{sub 2}Te{sub 3} but occur at lower temperatures. • Sn substitution tends to increase electrical conductivity and Seebeck coefficient. • ZT of (GeTe){sub 7}Sb{sub 2}Te{sub 3} increases from 0.2 to 0.7 (at 400 °C) upon Sn substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mg dopant in Cu{sub 2}ZnSnSe{sub 4}: An n-type former and a promoter of electrical mobility up to 120 cm{sup 2} V{sup −1} s{sup −1}

Mg-doped Cu{sub 2}ZnSnSe{sub 4} (CZTSe) bulk materials with the (Cu{sub 2−x}Mg{sub x})ZnSnSe{sub 4} formula at x=0, 0.1, 0.2, 0.3, and 0.4 were prepared at 600 °C for 2 h with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring structural and electrical properties of Mg-doped CZTSe as a function of dopant concentration. Except at x=0, all Mg-doped CZTSe pellets showed an n-type behavior. The Mg-doped CZTSe pellets showed an n-type behavior. n-Type Mg-CZTSe pellets at x=0.1 showed the highest electrical conductivity of 24.6 S cm{sup −1} and the net hole mobility of 120 cm{sup 2} V{sup −1} s{sup −1}, while they were 11.8 S cm{sup −1} and 36.5 cm{sup 2} V{sup −1} s{sup −1} for the undoped p-type CZTSe. Mg dopant is a strong promoter of electrical mobility. Mg dopant behaves as a donor defect in CZTSe at a 5% doping content, but is also used as an acceptor at a high content above 5%. Mg doping has further developed CZTSe into a promising semiconductor. - Graphical abstract: The effects of extrinsic doping of Mg{sup 2+} on the electrical properties of Cu{sub 2}ZnSnSe{sub 4} bulks. - Highlights: • (Cu{sub 2−x}Mg{sub x})ZnSnSe{sub 4} bulks were fabricated by liquid-phase sintering at 600 °C. • All Mg-x-CZTSe pellets except at x=0 exhibited n-type conductivity. • Electrical properties of CZTSe pellets changed with the Cu and Mg ratios. • Mg{sup 2+} goes to the Cu{sup 1+} site to form the Mg{sub Cu}{sup 1+} donor defect for the n-type CZTSe. • n-Type Mg-0.1-CZTSe bulk with 5% Mg showed the highest mobility of 120 cm{sup 2} V{sup −1} s{sup −1}.

36 MATERIALS SCIENCE↗