Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Elastic-wave sensitivity-guided adaptive seismic survey design for cost-effective monitoring of geological carbon storage

Effective seismic monitoring is essential for verifying CO₂ containment, detecting potential leakage, and optimizing operational decisions in geologic carbon storage. Here, this study presents a time-adaptive, elastic-wave sensitivity-guided framework for designing cost-effective seismic monitoring layouts for tracking CO₂ plume migration. The method is based on elastic-wave sensitivity analysis, which quantifies how variations in subsurface properties impact seismic wavefields. Two complementary design strategies are developed: one based on selecting a fixed number of seismic sources (Method A), and the other based on selecting source–receiver pairs contributing to a fixed fraction of cumulative elastic-wave sensitivity energy (Method B). The optimization workflow to identify source–receiver configurations with the highest detection potential is demonstrated using a hypothetical GCS scenario at the Kimberlina site in California using simulations of elastic-wave sensitivity data at multiple post-injection timesteps. Results show that both strategies adapt to evolving plume geometries and wavefield sensitivities, with Method B offering broader spatial coverage and Method A ensuring simpler deployment. This framework enables site-specific, cost-effective, and risk-informed seismic survey designs, enhancing the ability to monitor CO₂ migration over time in evolving geological environments

58 GEOSCIENCES↗
DOE OSTI2024

Reconstructing the reflectivity of liquid surfaces from grazing incidence X-ray off-specular scattering data

The capillary wave model of a liquid surface predicts both the X-ray specular reflection and the diffuse scattering around it. A quantitative method is presented to obtain the X-ray reflectivity (XRR) from a liquid surface through the diffuse scattering data around the specular reflection measured using a grazing incidence X-ray off-specular scattering (GIXOS) geometry at a fixed horizontal offset angle with respect to the plane of incidence. With this approach the entire Q z -dependent reflectivity profile can be obtained at a single, fixed incident angle. This permits a much faster acquisition of the profile than with conventional reflectometry, where the incident angle must be scanned point by point to obtain a Q z -dependent profile. The XRR derived from the GIXOS-measured diffuse scattering, referred to in this paper as pseudo-reflectivity, provides a larger Q z range compared with the reflectivity measured by conventional reflectometry. Transforming the GIXOS-measured diffuse scattering profile to pseudo-XRR opens up the GIXOS method to widely available specular XRR analysis software tools. Here the GIXOS-derived pseudo-XRR is compared with the XRR measured by specular reflectometry from two simple vapor–liquid interfaces at different surface tension, and from a hexadecyltrimethylammonium bromide monolayer on a water surface. For the simple liquids, excellent agreement (beyond 11 orders of magnitude in signal) is found between the two methods, supporting the approach of using GIXOS-measured diffuse scattering to derive reflectivities. Pseudo-XRR obtained at different horizontal offset angles with respect to the plane of incidence yields indistinguishable results, and this supports the robustness of the GIXOS-XRR approach. The pseudo-XRR method can be extended to soft thin films on a liquid surface, and criteria are established for the applicability of the approach.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Wrapper to Use a Machine-Learning-Based Algorithm for Earthquake Monitoring

Seismology is one of the main sciences used to monitor volcanic activity worldwide. Fast, efficient, and accurate seismicity detectors are crucial to assess the activity level of a volcano in near–real time and to issue timely warnings. Traditional real–time seismic processing software uses phase onset pickers followed by a phase association algorithm to declare an event and estimate its location. The pickers typically do not identify whether the detected phase is a P or S arrival, which can have a negative impact on hypocentral location quality and complicates phase association. We implemented the deep–neural–network–based method PhaseNet to identify in real time P and S seismic waves on data from one– and three–component seismometers. We tuned the Earthworm binder_ew associator module to use the phase identification from PhaseNet to detect and locate the events, which we archive in a SeisComP3 database. We assessed the performance of the algorithm by comparing the results with existing catalogs built to monitor seismic and volcanic activity in Mayotte and the Lesser Antilles region. Our algorithm, which we refer to as PhaseWorm, showed promising results in both contexts and clearly outperformed the previous automatic method implemented in Mayotte. As a result, this innovative real–time processing system is now operational for seismicity monitoring in Mayotte and Martinique.

58 GEOSCIENCES↗
DOE OSTI2020

Time-Lapse Vertical Seismic Profiling (VSP) for CO 2 Storage in a Depleted Oil Field in Northern Michigan

The goal of the Dover 33 VSP study was to test the effectiveness of time-lapse VSP for detecting and delineating a plume of more than 271,000 tonnes of CO 2 injected into the Brown Niagaran and A-1 Carbonate formations within the Dover 33 reef between March 2013 and September 2016. Five 2D walkaway VSP (WVSP) source lines were acquired by SIGMA3 in September 2016 to investigate the possible time-lapse response in both P-wave and PS-wave seismic data. The data was compared to the same survey geometry acquired in March 2013 by SR2020.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Data for "Propagation of EMIC Waves from Shabansky Orbits in the Dayside Magnetosphere"

Full-wave simulations of electromagnetic ion cyclotron waves in a non-dipole compressed magnetic field have been conducted using the Petra-M simulation code. The manuscript investigates the effect of misalignment of the Faraday screen and electron density in the scrape-off layer on the excitation and propagation of fast helicon and slow mode waves.

Magnetosphere: outer↗
DOE OSTI2025

The influence of wind veer and drivetrain flexibility on fatigue loading for large floating wind turbines

To reduce costs, offshore wind turbines are expected to be designed with significantly increased rotor diameters. Larger turbines become more flexible and span a larger portion of the atmospheric boundary layer. With these changes, the validity of traditional modeling assumptions should be investigated. This work challenges two common assumptions: (1) that the drivetrain can be considered rigid (except in torsion) and does not couple with the rotor and tower and 2) that wind directional change with height (veer) does not greatly influence the fatigue damage in the tower, blades and drivetrain. Two large semi-submersible floating wind turbines are considered: a 15 and a 22 MW reference turbine. Both use direct-drive generators. Aero-hydro-servo-elastic simulations are performed using OpenFAST, with drivetrain bending flexibility and main bearing response implemented in the coupled analysis. The turbines are subjected to a set of load cases at below-, near- and above-rated mean wind speeds, assembled based on the 3 km Norwegian reanalysis (NORA3) hourly wind and wave hindcast data for Utsira Nord, off the coast of Norway. In each load case, conditions with and without veer are simulated to evaluate the influence of veer on damage equivalent loads (DELs) of the turbine tower, blades and main bearings. Further, these load cases are applied to evaluate the influence of drivetrain flexibility on aero-elastic turbine response. The results indicate that, depending on the veer gradient, mean wind speed, operating regime and turbine size, veer can be very important for tower-top DELs and the fluctuations of main bearing radial loads, while main bearing and blade-root flapwise DELs are less affected. Considering these specific load cases and turbine models, drivetrain flexibility is found to significantly influence tower-top DELs of the largest turbine: the tower-top fore-aft and torsional damage equivalent moments of the 22 MW turbine are reduced by more than 20 % at near-rated wind speeds when the drivetrain is modeled as flexible.

17 WIND ENERGY↗
DOE OSTI2024

System and method for wave prediction

A method and system for prediction of wave properties include collecting time series data streams from one or more wave measurement devices and processing the data using a wave-prediction algorithm to identify the frequency components of the data and compute wave parameters. The wave-field is propagated in space and time to predict wave height, speed, and velocity at a target location. A sliding window approach is used to continuously update the prediction in real-time.

Previsic, Mirko↗
DOE OSTI2022

Utah FORGE: Updated Seismic Event Catalogue from the April, 2022 Stimulation of Well 16A(78)-32

These are revised catalogs, related to the April, 2022 well 16A(78)-32 stimulation (phases 1,2, & 3), provided by Geo Energie Suisse (GES) that include additional events at the start of Stage 1 and some tidying up of some locations. These catalogs also include events for additional events that were auto-located to provide a larger dataset for statistical analyses, like b-value calculations. The actual auto-locations have been removed to prevent spurious location plots being created. Times are recorded in UTC (Coordinate Universal Time), and the coordinate reference system is UTM Zone 12N, NAD83.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

TEAMER: Biofouling Analysis for Wave Energy Piston Design - Load Cell Data

Biofouling and corrosion are a major concern for all ocean-deployed components, especially when mechanical motion is involved. Triton has developed the concept of a biofouling mitigation seal as part of the piston sealing assembly for the Triton Wave Energy Converter (TSI-WEC). This mitigation seal has the purpose of preventing the formation of a biofilm on the inside of the piston cylinder. It is hypothesized that the prevention of a biofilm will reduce the amount of macro-biofouling that can occur in the piston assembly. The mitigation seal can also reduce the wear on the main dynamic seal, helping to maintain smooth operation and water-tightness. The cylinder is made from a thermoset composite epoxy, which is resistant to corrosion. However, no studies have researched the material's performance with biofouling. Triton placed two prototype Power Take-Off (PTO) assemblies in a PNNL biofouling tank, one with a biofouling mitigation seal and one without, allowing for an evaluation of seal effectiveness at the prevention of biofouling. In actual WEC operation, wave action would react against the piston, which would drive the linear actuator and electric generator, providing electrical power. In the test setup, this was reversed; a linear actuator was powered to drive the piston in a consistent motion within the cylinder. There are two assemblies: one has a biofouling mitigation seal, the other (control) does not. The following data encompasses a 4 month test period, with load cells being used to monitor piston friction force. Results from this testing will be used to improve seal design and material selection, mitigating risk of premature failure during open water testing and evaluation. This project is part of the TEAMER RFTS 3 (request for technical support) program.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Local Explosion Detection and Infrasound Localization by Reverse Time Migration Using 3-D Finite-Difference Wave Propagation

Infrasound data are routinely used to detect and locate volcanic and other explosions, using both arrays and single sensor networks. However, at local distances (< km) topography often complicates acoustic propagation, resulting in inaccurate acoustic travel times leading to biased source locations when assuming straight-line propagation. Here we present a new method, termed Reverse Time Migration-Finite-Difference Time Domain (RTM-FDTD), that integrates numerical modeling into the standard RTM back-projection process. Travel time information is computed across the entire potential source grid via FDTD modeling to incorporate the effects of topography. The waveforms are then back-projected and stacked at each grid point, with the stack maximum corresponding to the likely source. We apply our method to three volcanoes with different network configurations, source-receiver distances, and topography. At Yasur Volcano, Vanuatu, RTM-FDTD locates explosions within ~20 m of the source and differentiates between multiple vents. RTM-FDTD produces a more accurate location for the two Yasur subcraters than standard RTM and doubles the number of detected events. At Sakurajima Volcano, Japan, RTM-FDTD locates the source within 50 m of the active vent despite notable topographic blocking. The RTM-FDTD location is similar to that from the Time Reversal Mirror method, but is more computationally efficient. Lastly, at Shishaldin Volcano, Alaska, RTM and RTM-FDTD both produce realistic source locations (<50 m) for ground-coupled airwaves recorded on a four-station seismic network. We show that RTM is an effective method to detect and locate infrasonic sources across a variety of scenarios, and by integrating numerical modeling, RTM-FDTD produces more accurate source locations and increases the detection capability.

58 GEOSCIENCES↗
DOE OSTI2020

EGS Collab Experiment 2: 4100 Foot Level Elastic Property Data

Static and dynamic elastic properties (Young's modulus, Shear Modulus, P-wave Modulus, and Poisson's Ratio) of amphibolites and rhyolites from the TV4100 and TH4100 boreholes at the Sanford Underground Research Laboratory (SURF). Elastic properties include Young's modulus, Poisson's ratio, shear modulus, and p-wave modulus. Raw data from the experiments and slides describing the experimental procedure and a summary of results are included, along with a readme file with additional definitions and information.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

Local-Regional Surface Wave Dispersion Analysis using Ambient Noise Data of the Southern Nevada National Security Site Area

This report details seismic ambient noise analysis to improve seismic velocity estimates of the southeastern Nevada National Security Site (NNSS). We compare two different methods for estimating surface wave dispersion curves from ambient noise cross-correlations: frequency time analysis (FTAN) and Aki’s cross-spectral method (XSpec). We find that XSpec performs better for our local-regional dataset and frequency content. Using phase velocity estimates from XSpec, we build a preliminary phase velocity dispersion dataset, which contains data for 1,054 station pairs and 8,905 discrete phase velocity measurements for periods between 0.5 and 13 s. This phase velocity dataset will be incorporated into an updated local-regional P and S wave velocity model of the southeastern NNSS in the future and is expected to improve upon shallow velocity estimates.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Seismoacoustic Explosion Yield and Depth Estimation: Insights from the Large Surface Explosion Coupling Experiment

The Large Surface Explosion Coupling Experiment (LSECE) is a chemical explosion experiment conducted in Yucca Flat at the Nevada National Security Site in 2020. The experiment included two surface detonations of ~1000 kg trinitrotoluene equivalent. The main goal of this experiment was to provide the ground-truth data for seismoacoustic wave excitation by large chemical explosions near the ground surface. The seismic and acoustic energy partitioning between the surface is strongly governed by the depth or height of explosions, and either seismic or acoustic-only analysis may have inherent ambiguity in determining explosion yield and depth simultaneously. Previous studies suggested that joint seismoacoustic analysis can resolve the trade-off and reduce the uncertainty of yield and depth estimation dramatically. Here we demonstrate the capability of seismoacoustic analysis to improve the accuracy of explosion yield and depth estimation with the LSECE data. Local acoustic wave propagation in the atmosphere can be substantially affected by constantly varying weather conditions. Consisting of two detonations before dawn and in the afternoon, LSECE provides unique data to evaluate the model accuracy of acoustic wave propagation and seismoacoustic energy partitioning depending on local atmospheric conditions. We quantitatively evaluate the accuracy of yield and depth estimation depending on atmospheric variability and the improvement achieved by the joint seismoacoustic approach.

58 GEOSCIENCES↗
DOE OSTI2022

Demonstration of NREL Modeling Capability to Design the Next Generation of Floating Offshore Wind Turbines with Stiesdal and Magellan Wind (Cooperative Research and Development Final Report)

This Technology Commercialization Fund (TCF) CRADA involved demonstration of NREL modeling capability using OpenFAST (formerly known as FAST) to design the next generation of floating offshore wind turbines (FOTW) with Stiesdal’s TetraSpar design. The objective of the project was to enable the design and optimization of next generation FOWT that show promise to make FOWT cost-competitive with other energy technologies by upgrading, verifying, and validating improvements to OpenFAST. This objective was achieved by (1) upgrading OpenFAST to compute floating substructure flexibility and member-level loads, which is critical to enable the design of floating substructures—especially newer designs that are streamlined, flexible, and cost-effective; (2) verifying the new OpenFAST capabilities through model-to-model comparisons and validating the capabilities through comparisons to empirical data generated with wave-tank testing, using TetraSpar data provided by Stiesdal; and (3) making available the upgraded OpenFAST tool to the wind energy community to enable next-generation floating wind designs.

17 WIND ENERGY↗