Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “water model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Models for Water Isotopes Constrained with Data from Crystal Face

During the year covered by this proposal we conducted work on several different topics, as reflected by our publications listed below. One major activity was to work with a group of about 10 scientists from around the country to prepare a science-planning document (Tropical Composition, Cloud and Climate Coupling Experiment (TC4)) that outlined the rationale, locations, strategy to accomplish the goals, and possible payloads for a set of three tropical missions. We also prepared background materials for various NRAs being prepared at NASA Headquarters for missions in Costa Rica, Darwin and Guam. Unfortunately budgetary constraints prevented these missions from moving forward. In conjunction with the group NASA Ames we built a new numerical model for deep convection and have applied that model to simulate the CRYSTAL isotope data. Our goal in particular has been to better understanding how convection distributes water vapor isotopes. CRYSTAL observations of water isotopes are very different from those suggested by previous workers who assumed the isotopes would obey Rayleigh fractionation. The water isotope study has several implications. First it is a check on the realism of the deep convection model. Second, the isotopes are a measure of the precipitation removal in the atmosphere. Hence they provide a constraint on a parameter that is difficult to otherwise measure. Finally it has been suggested that isotopes may be the key to unraveling the water transport into the stratosphere and upper troposphere. Such transport is critical both for the radiation balance and for stratospheric chemistry. Ours is the first model that is able to treat this transport. Our initial results are now in press in Geophys. Res. Lett. Essentially we are able to explain the vertical profiles of isotopes in the tropical tropopause transition layer. We are also able to account for stratospheric humidity ana isotope abundances with this model. The data suggest that isotopes do not provide a clear constraint on the mechanism by which water enters the stratosphere- whether by convection, or by slow ascent. Our work is relevant for the water isotope comparison experiments recently done by NASA. We are conducting numerical experiments related to this project to help understand that data.

Toon, Owen B.↗
NASA NTRS1995

Mean Sea Level Derived from Altimetry and Wind-Driven Numerical Models in the Indian Ocean

Wind-driven model skill in simulating sea level variations in the Indian Ocean depends on our knowledge of the mean ocean dynamic topography. This is demonstrated by running the nonlinear or linear version of a shallow-water model driven by observed winds over Geosat and TOPEX periods. Geosat variations are assimilated in the nonlinear shallow-water model with the objective of obtaining topography data.

numerical models Indian ocean mean sea level remot↗
NASA NTRS1977

An information system design for watershed-wide modeling of water loss to the atmosphere using remote sensing techniques

Results are presented of a study intended to develop a general location-specific remote-sensing procedure for watershed-wide estimation of water loss to the atmosphere by evaporation and transpiration. The general approach involves a stepwise sequence of required information definition (input data), appropriate sample design, mathematical modeling, and evaluation of results. More specifically, the remote sensing-aided system developed to evaluate evapotranspiration employs a basic two-stage two-phase sample of three information resolution levels. Based on the discussed design, documentation, and feasibility analysis to yield timely, relatively accurate, and cost-effective evapotranspiration estimates on a watershed or subwatershed basis, work is now proceeding to implement this remote sensing-aided system.

Khorram, S.↗
NASA NTRS1975

Water-management model in Florida from LANDSAT-1 data

A prototype data acquisition and dissemination network and its effectiveness in improving and/or solving hydrologic problems in southern Florida are evaluated. The network utilized LANDSAT MSS imagery and in situ monitoring by LANDSAT-DCS. Results show water level and rain fall measurements were collected and disseminated in less than two hours, a significant improvement over conventional methods which took up to two months. Improved network performance has also aided the development of water budgets and water distribution to the people, funa, and flora in the area. Imagery from LANDSAT was also found to enhance the utility of ground measurements.

Higer, A. L.↗
NASA NTRSDate not supplied

Modeling Water-Rock Reactions Beneath the Greenheugh Pediment, Gale Crater, Mars

The Mars Science Laboratory Curiosity rover has been exploring the clay rich Glen Torridon unit in Gale crater since sol 2300 of the mission [1]. As identified in orbital data [2], this clay rich area [3] in the Murray formation is overlain with the Greenheugh Pediment unit to the south, which is part of the Stimson Formation [4]. Curiosity acquired the drill sample Hutton in the Upper Murray formation 2 – 3 meters below the Greenheugh Pediment [5,6]. This study uses thermochemical modelling to investigate the hypothesis for alteration in the Murray formation below the Greenheugh Pediment. Specifically, if the contact between the Greenheugh Pediment and Murray sediments was a conduit for diagenetic fluids (a low water/rock scenario) or if subaerial weathering altered the Murray sediments before cementation began (a high water/rock scenario) [6]. Here, we report on preliminary modeling where we have reacted the chemical composition for the Hutton drill sample with Gale Portage Water (GPW) at 25 °C, 50 °C and 200 °C, for 10% Fe3+/Fetot of the host rock.

SMR Turner↗
NASA NTRS1981

Survey of in-situ and remote sensing methods for soil moisture determination

General methods for determining the moisture content in the surface layers of the soil based on in situ or point measurements, soil water models and remote sensing observations are surveyed. In situ methods described include gravimetric techniques, nuclear techniques based on neutron scattering or gamma-ray attenuation, electromagnetic techniques, tensiometric techniques and hygrometric techniques. Soil water models based on column mass balance treat soil moisture contents as a result of meteorological inputs (precipitation, runoff, subsurface flow) and demands (evaporation, transpiration, percolation). The remote sensing approaches are based on measurements of the diurnal range of surface temperature and the crop canopy temperature in the thermal infrared, measurements of the radar backscattering coefficient in the microwave region, and measurements of microwave emission or brightness temperature. Advantages and disadvantages of the various methods are pointed out, and it is concluded that a successful monitoring system must incorporate all of the approaches considered.

Schmugge, T. J.↗
NASA NTRS1975

Water-management models in Florida from ERTS-1 data

The author has identified the following significant results. The usefullness of ERTS 1 to improving the overall effectiveness of collecting and disseminating data was evaluated. ERTS MSS imagery and in situ monitoring by DCS were used to evaluate their separate and combined capabilities. Twenty data collection platforms were established in southern Florida. Water level and rainfall measurements were collected and disseminated to users in less than 2 hours, a significant improvement over conventional techniques requiring 2 months. ERTS imagery was found to significantly enhance the utility of ground measurements. Water stage was correlated with water surface areas from imagery in order to obtain water stage-volume relations. Imagery provided an economical basis for extrapolating water parameters from the point samples to unsampled data and provided a synoptic view of water mass boundaries that no amount of ground sampling or monitoring could provide.

Higer, A. L.↗
NASA NTRS2021

Modelling the Water and Carbon Dioxide Production Rates of Comet 67P/Churyumov-Gerasimenko

The European Space Agency Rosetta/Philae mission to Comet 67P/Churyumov–Gerasimenko in 2014–2016 is the most complete and diverse investigation of a comet carried out thus far. Yet, many physical and chemical properties of the comet remain uncertain or unknown, and cometary activity is still not a well–understood phenomenon. We here attempt to place constraints on the nucleus abundances and sublimation front depths of H 2 O and CO 2 ice, and to reconstruct how the nucleus evolved throughout the perihelion passage. We employ the thermophysical modelling code ‘Numerical Icy Minor Body evolUtion Simulator’, or NIMBUS, to search for conditions under which the observed H 2 O and CO 2 production rates are simultaneously reproduced before and after perihelion. We find that the refractories to water–ice mass ratio of relatively pristine nucleus material is μ ≈ 1, that airfall material has μ ≈ 2, and that the molar abundance of CO 2 relative H 2 O is near 30 per cent. The dust mantle thickness is typically ≲ 2 cm. The average CO 2 sublimation front depths near aphelion were ~ 3.8 m and ~ 1.9 m on the northern and southern hemispheres, respectively, but varied substantially with time. We propose that airfall material is subjected to substantial fragmentation and pulverisation due to thermal fatigue during the aphelion passage. Sub–surface compaction of material due to CO 2 activity near perihelion seems to have reduced the diffusivity in a measurable way.

67P/Churyumov–Gerasimenko↗
NASA NTRS1986

A cloud collision model for water maser excitation

High-velocity collisions between small, dense, neutral clouds or between a dense cloud and a dense shell can provide the energy source required to excite H2O maser emission. The radiative precursor from the surface of the collisional shock front rapidly diffuses through the cloud, heating the dust grains but leaving the H2 molecules cool. Transient maser emission occurs as the conditions for the Goldreich and Kwan (1974) 'hot-dust cold-gas' maser pump scheme are realized locally within the cloud. In time, the local maser action quenches due to the heating of the H2 molecules by collisions against the grains. Although this model cannot explain the very long-lived steady maser features, it is quite successful in explaining a number of the observed properties of the high-velocity features in such sources as Orion, W51, and W49. In particular, it provides a natural explanation for the rapid time variations, the narrow line widths, juxtaposition of high- and low-velocity features, and the short lifetimes which are frequently observed for the so-called high-velocity maser 'bullets' thought to be accelerated by strong stellar winds.

Tarter, T. C.↗
NASA NTRS1987

Programming a hillslope water movement model on the MPP

A physically based numerical model was developed of heat and moisture flow within a hillslope on a parallel architecture computer, as a precursor to a model of a complete catchment. Moisture flow within a catchment includes evaporation, overland flow, flow in unsaturated soil, and flow in saturated soil. Because of the empirical evidence that moisture flow in unsaturated soil is mainly in the vertical direction, flow in the unsaturated zone can be modeled as a series of one dimensional columns. This initial version of the hillslope model includes evaporation and a single column of one dimensional unsaturated zone flow. This case has already been solved on an IBM 3081 computer and is now being applied to the massively parallel processor architecture so as to make the extension to the one dimensional case easier and to check the problems and benefits of using a parallel architecture machine.

Devaney, J. E.↗
NASA NTRS2011

CFD Model of Water Droplet Transport for ISS Hygiene Activity

The goal of the study is to assess the impacts of free water propagation in the Waste and Hygiene Compartment (WHC). Free water can be generated inside the WHC in small quantities due to crew hygiene activity. To mitigate potential impact of free water in Node 3 cabin the WHC doorway is enclosed by a waterproof bump-out, Kabin, with openings at the top and bottom. At the overhead side of the rack, there is a screen that prevents large drops of water from exiting. However, as the avionics fan in the WHC causes airflow toward the deck side of the rack, small quantities of free water may exit at the bottom of the Kabin. A Computational Fluid Dynamics (CFD) analysis of Node 3 cabin airflow made possible to identify the paths of water transport. The Node 3 airflow was computed for several ventilation scenarios. To simulate the droplet transport the Lagrangian discrete phase approach was used. Various initial droplet distributions were considered in the study. The droplet diameter was varied in the range of 2-20 mm. The results of the computations showed that most of the drops fall to the rack surface not far from the WHC curtain. The probability of the droplet transport to the adjacent rack surface with electronic equipment was predicted.

Son, Chang H.↗
NASA NTRS2013

CFD Lagrangian Modeling of Water Droplet Transport for ISS Hygiene Activity Application

The goal of this study was to assess the impacts of free water propagation in the Waste and Hygiene Compartment (WHC) installed in Node 3. Free water can be generated inside the WHC in small quantities due to crew hygiene activity. To mitigate potential impact of free water in Node 3 cabin the WHC doorway is enclosed by a waterproof bump-out, Kabin, with openings at the top and bottom. At the overhead side of the rack, there is a screen that prevents large drops of water from exiting. However, as the avionics fan in the WHC causes airflow toward the deck side of the rack, small quantities of free water may exit at the bottom of the Kabin. A Computational Fluid Dynamics (CFD) analysis of Node 3 cabin airflow enable identifying the paths of water transport. To simulate the droplet transport the Lagrangian discrete phase approach was used. Various initial droplet distributions were considered in the study. The droplet diameter was varied in the range of 5-20 mm. The results of the computations showed that most of the drops fall to the rack surface not far from the WHC curtain.

Son, Chang H.↗
NASA NTRS2003

Tagging Water Sources in Atmospheric Models

Tagging of water sources in atmospheric models allows for quantitative diagnostics of how water is transported from its source region to its sink region. In this presentation, we review how this methodology is applied to global atmospheric models. We will present several applications of the methodology. In one example, the regional sources of water for the North American Monsoon system are evaluated by tagging the surface evaporation. In another example, the tagged water is used to quantify the global water cycling rate and residence time. We will also discuss the need for more research and the importance of these diagnostics in water cycle studies.

Bosilovich, M.↗
NASA NTRS1993

High-Frequency Orographically Forced Variability in a Single-Layer Model of the Martian Atmosphere

A shallow water model with realistic topography and idealized zonal wind forcing is used toinvestigate orographically forced modes in the Martian atmosphere. Locally, the model reproduceswell the climatology at the sites of Viking Lander I and II (VL1 and VL2) as inferred from theViking Lander fall and spring observations. Its variability at those sites is dominated by a 3-sol(Martian solar day) oscillation in the region of VL1 and by a 6-sol oscillation in that of VL2. Theseoscillations are forced by the zonal asymmetries of the Martian mountain field. It is suggested thatthey contribute to the observed variability by reinforcing the baroclinic oscillations with nearbyperiods identified in observational studies. The spatial variability associated with the orographicallyforced oscillations is studied by means of extended empirical orthogonal function analysis. The 3-solVL1 oscillation corresponds to a tropical, eastward-traveling, zonal-wavenumber one pattern...

Keppenne, C. L.↗