SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Urban Air Mobility (UAM) Market Study is an in-depth study for ODM market leveraging identified key technical barriers to understand community interests and market conditions from all aspects such as regulations, economics, public acceptance, airspace operations and safety.
The Urban Air Mobility (UAM) Market Study is an in-depth study for ODM market leveraging identified key technicalbarriers to understand community interests and market conditions from all aspects such as regulations, economics,public acceptance, airspace operations and safety.
NASA is developing Urban Air Mobility (UAM) concepts to (1) create first-generation reference vehicles that can be used for technology, system, and market studies, and (2) hypothesize second-generation UAM aircraft to determine high-payoff technology targets and future research areas that reach far beyond initial UAM vehicle capabilities. This report discusses the vehicle-level technology assumptions for NASA’s UAM reference vehicles, and highlights future research areas for second-generation UAM aircraft that includes deflected slipstream concepts, low-noise rotors for edgewise flight, stacked rotors/propellers, ducted propellers, solid oxide fuel cells with liquefied natural gas, and improved turbo shaft and reciprocating engine technology. The report also highlights a transportation network-scale model that is being developed to understand the impact of these and other technologies on future UAM solutions.
In this study, we examine the environmental impact of Urban Air Mobility (UAM) operations as measured via carbon dioxide (CO2) emissions by leveraging a computational model from previous studies that has been refined and expanded. Several scenarios are examined in which total transportation emissions for a representative day in a metro area are distributed differently among vehicle types and transportation modes. Specifically, we investigate the use of electric air vehicles in a UAM network; the increasing presence of electric ground vehicles for ground transportation; the impacts from implementing ridesharing in the UAM mode; and the effects of varying the electricity grid emissions. Results for a case study in the Chicago, IL metro area indicate that incorporating electric ground vehicles and UAM ridesharing can both lead to reduced CO2 emissions. These preliminary results indicate that carbon emissions from a UAM system leveraging ridesharing and all-electric aircraft may not be a practical operational limit on UAM, though further improvements to the modeling are warranted.
In this study, we examine the environmental impact of Urban Air Mobility (UAM) operations as measured via carbon dioxide (CO2) emissions by leveraging a computational model from previous studies that has been refined and expanded. Several scenarios are examined in which total transportation emissions for a representative day in a metro area are distributed differently among vehicle types and transportation modes. Specifically, we investigate the use of electric air vehicles in a UAM network; the increasing presence of electric ground vehicles for ground transportation; the impacts from implementing ridesharing in the UAM mode; and the effects of varying the electricity grid emissions. Results for a case study in the Chicago, IL metro area indicate that incorporating electric ground vehicles and UAM ridesharing can both lead to reduced CO2 emissions. These preliminary results indicate that carbon emissions from a UAM system leveraging ridesharing and all-electric aircraft may not be a practical operational limit on UAM, though further improvements to the modeling are warranted.
Urban Air Mobility (UAM), i.e. on-demand urban passenger (and cargo) transportation services, represents a new technology and potentially an emerging industry. It is not simply an extension of commercial aviation as we know it—it is a different domain. A first priority for UAM is that it be safe and secure (Booz, Allen, Hamilton, 2018; Crown, Consulting, Inc., 2018). A workshop held in Arlington, Virginia, brought together experts from the on-demand world (including UAM) to assess and prioritize the challenges and barriers to be addressed in successfully introducing On Demand Mobility (ODM) vehicles and services (ODM and Emerging Technology Workshop, 2016). Of the nine challenges assessed, the highest priority was assigned to certification, followed by affordability, and then safety. Considering the confluence of certification and safety, it is clear that risk and its assessment were judged to be of high relevance to workshop participants.
The development of data-driven models for human mobility in urban settings requires access to substantial and diverse real-world data. However, existing historical data often presents challenges such as limited volume, variety, and veracity, as well as missing data and privacy preservation concerns. Also, urban mobility modeling is inherently time-variant, complex, and multi-modal, encompassing everything from individual walking and running to private road travel and large-scale public transportation. These challenges call for innovative solutions to overcome data limitations and compute needs to model mobility behaviors accurately. To address these challenges, we propose a distributed, co-simulation-based architecture DURMOSim that integrates real-world data with scalable, high-fidelity simulations, demonstrating distributed co-simulation feasibility with existing mobility models. DURMOSim underpins a modular integration that would enable using any available mobility simulators for greater extensibility and scalability in performing various urban scenarios. In this paper, we present the design, implementation, and performance evaluation of DURMOSim, highlighting its capability to model population-scale mobility patterns. Our initial results show its ability to dynamically synchronize multiple simulation models at runtime with negligible computational overhead. We believe DURMOSim could be a robust tool for advancing urban mobility research and intelligent transportation systems.
As interest in urban air mobility grows, increasingly high density traffic poses a challenge for the transition to safe, efficient, and timely operations. Hundreds of simultaneously demanded flights will need to share the same fleet, infrastructure, and constrained airspace. This paper investigates the feasibility of effectively managing high density traffic in congested urban environments by optimizing the design of airspace route structures. Demand estimations for the Dallas-Fort Worth and Los Angeles areas are used to evaluate potential improvements to airspace route design with the goal to accommodate the projected level of demand.
As interest in urban air mobility grows, increasingly high density traffic poses a challenge for the transition to safe, efficient, and timely operations. Hundreds of simultaneously demanded flights will need to share the same fleet, infrastructure, and constrained airspace. This paper investigates the feasibility of effectively managing high density traffic in congested urban environments by optimizing the design of airspace route structures. Demand estimations for the Dallas-Fort Worth and Los Angeles areas are used to evaluate potential improvements to airspace route design with the goal to accommodate the projected level of demand.
The Concept of Operations for Urban Air Mobility (UAM) put forward by FAA, NASA, and several industry stakeholders acknowledges the diversity and complexity in UAM operations and, thereby, envisions a federated architecture for UAM management. In this architecture, the decision-making is distributed to a set of service providers who collectively manage the shared airspace usage by different stakeholders. This notionally brings autonomy closer to the UAM businesses and encourages to explore the feasibility of decision making on the very edge, which is the topic of the presented research. This paper reports research conducted on the hypothesis based on which the residual compute capability onboard smart unmanned aerial systems (UASs) is utilized to build situational awareness and resolve conflicts by passive and active coordination among multiple UASs, thereby implementing a layer of distributed autonomy in UAM. Key features of the edge-computing approach involve inter-UAS information exchange, independent assessment of own flight and environmental conditions, and estimation of other UASs’ flight preferences, incorporating machine learning techniques in the last two. Parallel computing on portable graphics processing unit (GPU) enables the machine learning workflow on the edge. A custom-built 3D simulator is used to evaluate the efficacy of the distributed decision-making on the edge. Each edge node, representing a smart UAS, connects to the simulator from a remote location and independently controls the behavior of the corresponding virtual asset in the simulator, analogous to participants in an online multi-player game. The presented edge-computing-based distributed decision-making framework is envisioned to pave the way for collective mobility of autonomous air vehicles in the future shared airspace, while allowing the inclusion of the business preferences of the UAS operators within allowed regulatory limits.
The Concept of Operations for Urban Air Mobility (UAM) put forward by FAA, NASA, and several industry stakeholders acknowledges the diversity and complexity in UAM operations and, thereby, envisions a federated architecture for UAM management. In this architecture, the decision-making is distributed to a set of service providers who collectively manage the shared airspace usage by different stakeholders. This notionally brings autonomy closer to the UAM businesses and encourages to explore the feasibility of decision making on the very edge, which is the topic of the presented research. This paper reports research conducted on the hypothesis based on which the residual compute capability onboard smart unmanned aerial systems (UASs) is utilized to build situational awareness and resolve conflicts by passive and active coordination among multiple UASs, thereby implementing a layer of distributed autonomy in UAM. Key features of the edge-computing approach involve inter-UAS information exchange, independent assessment of own flight and environmental conditions, and estimation of other UASs’ flight preferences, incorporating machine learning techniques in the last two. Parallel computing on portable graphics processing unit (GPU) enables the machine learning workflow on the edge. A custom-built 3D simulator is used to evaluate the efficacy of the distributed decision-making on the edge. Each edge node, representing a smart UAS, connects to the simulator from a remote location and independently controls the behavior of the corresponding virtual asset in the simulator, analogous to participants in an online multi-player game. The presented edge-computing-based distributed decision-making framework is envisioned to pave the way for collective mobility of autonomous air vehicles in the future shared airspace, while allowing the inclusion of the business preferences of the UAS operators within allowed regulatory limits.
Urban Air Mobility vehicle concepts represent a new type of vertical lift machine. From the use of multirotor configurations to the use of variable RPM for thrust control of rigid, propeller-style rotors, many of the UAM concepts observed in industry have departed significantly from traditional VTOL designs. While such novel vehicle types may provide beneficial mission capability and efficiency, they have not been as thoroughly studied as more traditional configurations, and new aeromechanics analysis must be conducted. Operating states such as low-tip-speed rotors in edgewise flight may prove to yield unusual aeroelastic behavior and must be investigated. In the present work, a rotorcraft comprehensive analysis is used to analyze the aeroelastic characteristics of a fixed-pitch, variable RPM rotor in edgewise flight. The rotor model, a three-bladed, fixed pitch propeller, was developed in a previous work. Floquet theory analysis is used to capture the periodic nature of the dynamics. Parameters such as rotor rotational speed, forward flight speed, and blade torsion stiffness are varied and their impact on performance and stability are assessed. A value of torsion stiffness is identified to yield stable flight from 0-100 kts with a wide range of RPM values. The results may be used to provide insight into the aeroelastic characteristics of certain UAM-type rotors.
Emerging operations involving Advanced Air Mobility (AAM), such as Urban Air Mobility (UAM), pose a challenge to safety assurance and to accessibility within the National Airspace System (NAS).In particular, the public has a low tolerance for risk in aviation and the current NAS tends to be labor-intensive with limited ability to scale up for UAM. In response to this landscape, NASA is collaborating with industry to define a Concept of Operations (ConOps) for In-time System-Wide Safety Assurance (ISSA) for scalable UAM involving a service-oriented architecture. This architecture focuses safety investments for technological solutions that can overcome safety related barriers for emerging operations. By working with industry, consensus can be reached on desirable system traits that are based on integration and fusion of data and leverage increasingly autonomous and automated systems. These complex systems can identify anomalies, precursors, and trends that together enable more proactive management of operational risks. AAM and UAM elevate the need for risk management in relation to increasing density and heterogeneity of vehicles and operations. Whereas safety in today’s NAS is built on a history of programs and technologies that react to incidents and accidents, AAM presents an opportunity to leverage that experience and its implications and proactively integrate safety into the earliest designs of vehicles and systems. In a perfect world AAM and UAM would not be inherently dangerous but until then ensuring the highest quality of safety requirements is the bridge to mitigating risks.
The term “Advanced Air Mobility” has been adopted by NASA to describe safe, sustainable, affordable, and accessible aviation for transformational local and intraregional missions. By this definition, Advanced Air Mobility includes both “rural” and “urban” applications including cargo and passenger transport missions, and other aerial missions (e.g., infrastructure inspection). There will be a range of aircraft types performing such missions, including small and medium Unmanned Aircraft Systems (UAS), electric Conventional Takeoff and Landing (eCTOL) aircraft, and electric Vertical Takeoff and Landing (eVTOL) aircraft. Urban Air Mobility (UAM) is a challenging use case for transporting cargo and passengers in an urban environment and is a new opportunity for aviation that could revolutionize the transportation system. The National Aeronautics and Space Administration and the Noise Division of the Federal Aviation Administration Office of Environment and Energy have initiated discussions for planning UAM community noise test(s) at the end of this decade. This presentation discusses the test goals, candidate test objectives, and some of activities needed in preparation for the test(s). It also draws distinctions between the type of study envisioned (observational vs. staged), and between it and recent and planned studies on large fixed-wing transports and commercial supersonic transports.
This paper introduces a ridesharing model useful for examining the role of ridesharing in advancing Urban Air Mobility (UAM) operations. Although the success of UAM will likely require a host of new technologies in aircraft design, airspace management, autonomy, and more, operational innovations like ridesharing may also be key, especially to lower operating costs and attract a broader market. The ridesharing algorithm introduced, termed the Passenger Aggregation Network with Very Efficient Listing (PANVEL) model, estimates trip numbers and passenger occupancy aboard particular aircraft within a UAM network in a metropolitan area. This algorithm is applied within a transportation computational framework to determine the impact of ridesharing on mode choice, passenger travel patterns, and transportation costs. The algorithm aggregates passengers traveling between identical origin-destination pairs, factoring in individual-specific metrics, such as value of time and alternative mode options, to generate high load factors on UAM aircraft. The computational framework simulates passenger mode-choice selections using an effective-cost approach to determine the number of ridesharing UAM-preferred trips, and results with ridesharing are representative of a rough upper bound on UAM ridership potential for a given metro area. A case study in the Cleveland metro area is presented to demonstrate the algorithm and assess ridesharing potential.
This presentation introduces a ridesharing model useful for examining the role of ridesharing in advancing Urban Air Mobility (UAM) operations. Although the success of UAM will likely require a host of new technologies in aircraft design, airspace management, autonomy, and more, operational innovations like ridesharing may also be key, especially to lower operating costs and attract a broader market. The ridesharing algorithm introduced, termed the Passenger Aggregation Network with Very Efficient Listing (PANVEL) model, estimates trip numbers and passenger occupancy aboard particular aircraft within a UAM network in a metropolitan area. This algorithm is applied within a transportation computational framework to determine the impact of ridesharing on mode choice, passenger travel patterns, and transportation costs. The algorithm aggregates passengers traveling between identical origin-destination pairs, factoring in individual-specific metrics, such as value of time and alternative mode options, to generate high load factors on UAM aircraft. The computational framework simulates passenger mode-choice selections using an effective-cost approach to determine the number of ridesharing UAM-preferred trips, and results with ridesharing are representative of a rough upper bound on UAM ridership potential for a given metro area. A case study in the Cleveland metro area is presented to demonstrate the algorithm and assess ridesharing potential.
NASA is establishing a fleet of conceptual air vehicle designs to support research and development for Urban Air Mobility (UAM). This fleet of vehicles will enable examination of the sensitivity of UAM vehicle designs to technology assumptions, identify key research and development needs for UAM aircraft, and provide the UAM community with reference vehicles that are publicly available and based upon known assumptions. To date, five six-passenger UAM reference vehicles have been published: a single-main-rotor helicopter, a side-by-side helicopter, a quadrotor, a lift-plus-cruise, and a tiltwing. To increase the breadth of vehicle technologies encapsulated in the fleet of NASA UAM reference vehicles, this paper establishes a tiltduct vehicle as an addition to the fleet. The fleet will continue to evolve as future analyses and trade studies are performed. The tiltduct UAM reference vehicle has six tilting ducted proprotors. This paper describes the initial configuration downselection; discusses ducted proprotor design rules of thumb as they applied to the conceptual design of the reference vehicle; describes the vehicle sizing, trade studies, and tuning of models performed; and finally, compares the resulting tiltduct vehicle against the other six-passenger NASA UAM reference vehicles. The high-level analyses performed for this study did not indicate significant differences in performance between the tiltduct and tiltwing reference vehicles, and so vehicle performance alone may not be a key driver in the selection of a tiltduct vehicle over a tiltwing vehicle. However, if ducts are found to have significant acoustical benefits, then acoustical priorities may provide a compelling reason to incorporate ducted proprotors. One significant limitation of the design presented in this paper is that the ducted proprotor performance was tuned based upon performance characteristics observed during historical tests with disk loadings (defined as thrust divided by proprotor disk area) of 125-250 lb/ft$^2$. The tiltduct vehicle designed in this study has a disk loading of 30 lb/ft$^2$, to be more representative of UAM vehicles; further studies to understand performance of ducted proprotors at representative disk loadings are warranted.
Urban Air Mobility (UAM) is a new air transportation service concept to carry passengers or cargo in metropolitan areas, leveraged by innovative aircraft and air traffic automation technologies. NASA has conducted a series of simulations, called the X-series simulation, to evaluate the UAM concept of operations and support the development of airspace procedures and services for UAM operations. The simulation called “X5” was conducted in 2023 to test a Provider of Services for UAM (PSU) prototype developed by NASA for UAM flight planning, strategic conflict management support, and data exchange between UAM operators. In this simulation, two strategic conflict management capabilities, Demand-Capacity Balancing and Sequencing and Scheduling, were further investigated. This document describes the UAM system architecture modeled, the X5 simulation environment to be executed (e.g., traffic scenario and UAM airspace construct), and the strategic conflict management processes developed and evaluated in this study. Then, the simulation results are provided using several system performance metrics, such as the number of operations planned and activated, demand-capacity imbalances detected and resolved, and pre-departure delays. Based on these metrics, the test findings and lessons learned from this simulation are discussed. NASA developed a PSU prototype as part of a reference implementation of UAM system architecture and evolved strategic conflict management capabilities for UAM operations from the previous collaborative simulations with industry partners. Below is the summary of the achievements: - Aligned NASA’s UAM reference architecture with the FAA’s UAM ConOps notional architecture - Extended UAM airspace management capabilities to include 1) Demand-Capacity Balancing (DCB) to ensure operators coordinate planned usage of shared vertiports, and 2) Sequencing and Scheduling (S&S) at UAM corridor entry and exit points to help facilitate an orderly flow of traffic - Defined the PSU information exchange APIs and requirements towards informing industry standards - Developed and tested a NASA PSU prototype as reference implementation to validate the requirements and APIs - Developed a prototype service connecting NASA’s PSU and the FAA system for testing future PSU-ATM interface requirements - Tested NASA-developed assumptions for UAM operations such as airspace design, procedures, vehicle performance, and strategic conflict management methods to inform future Cooperative Operating Practices (COPs) development with industry - Evaluated system performance metrics such as number of simultaneous operations and ground delays that can help define system-level requirements. The simulation results showed that the UAM traffic demand could be managed to minimize the needs of tactical separation provision with ground delays assigned by DCB and S&S. These accomplishments and the lessons learned from the PSU Prototype X5 simulation activities will be valuable inputs for the Air Mobility Pathfinders (AMP) project, which is NASA’s new project to create and evaluate a reference architecture for safe, secure, and scalable UAM operations.