Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “twins”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Rapid transaction-undo recovery using twin-page storage management

This paper presents a twin-page storage method, which is an alternative to the TWIST (twin slot) approach by Reuter, for rapid transaction-undo recovery. In contrast to TWIST, our twin-page approach allows dirty pages in the buffer to be written at any instant onto disk without the requirement of undo logging, and, when a transaction is aborted, no explicit undo is required. As a result, all locks accumulated by the aborted transaction can be released earlier, allowing other transactions waiting for the locks to proceed. Through maintenance of aborted transaction identifiers, invalid pages written by the aborted transaction coexist with other valid pages and are guaranteed not be accessed by subsequent transactions. Instead of an explicit undo, most of the invalid pages are overwritten by subsequent normal updates. Performance in terms of disk I/O and CPU overhead for transaction-undo recovery is analyzed and compared with TWIST. It is shown that our scheme is particularly suited for applications where there are a large number of updates written onto disk when transactions are aborted, and there are frequent aborts. The approach, however, is not as applicable to environments where transactions are typically short or rarely aborted, or most updates are not written onto disk before a commitment.

Wu, Kun-Lung↗
NASA NTRS1994

Twin engine afterbody model

This test was originally conducted to determine the effects of several empennage and afterbody parameters on the aft-end aerodynamic characteristics of a twin-engine fighter-type configuration. Model variables were as follows: horizontal tail axial location and incidence, vertical tail axial location and configuration (twin-vs single-tail arrangements), tail booms, and nozzle power setting. Jet propulsion was simulated by exhausting high-pressure, cold-flow air from the nozzles. Following a successful test conducted on a single engine nacelle model to validate a CFD code, this model was chosen to be instrumented with pressure taps on the afterbody and nozzles and used as a follow-on test, providing a more complex geometry for the CFD code validation. A more limited test matrix was run to collect the pressure data, employing only the twin-tail configuration and varying only the horizontal and vertical tail locations. Mach number was varied from 0.6 to 1.2. Nozzle pressure ratio was varied from jet-off to 8. Angle-of-attack varied from 0 to 8 deg.

Wing, David J.↗
NASA NTRS1993

V803 Aquilae: A newborn W Ursae Majoris Siamese twin?

A complete photometric analysis of BVRI photometry of the physically compact, eclipsing binary V803 Aquilae is presented. Six mean epochs of minimum light were determined from observations covering three primary and three secondary eclipses. A period study covering 54 years of observation or nearly 77,000 orbital revolutions reveals three distinct eras of constant period with two major period jumps of +0.1 s and -0.3 s. The light curves shows that the primary and secondary eclipse depths are identical in V, and are nearly identical in B, R, and I, indicating that the components have nearly the same temperatures. Standard magnitudes were determined and a reddening estimate was made. A simultaneous solution of the four light curves was computed using the Wilson-Devinney synthetic light-curve code. The solution indicates that the system consists of twin approximately K4 stars in shallow contact with a fill-out of approximately 8%. A mass ratio of 1.000 was computed with a negligible temperature difference of only 6 K. Thus, based on our purely photometric solution, V803 Aql is made up of 'Siamese' (contact) twin components. Theory would indicate that the twins have just recently come into contact, and the lack of other equal-mass W Ursae Majoris systems would indicate that it is in a very transient or unusual state.

Samec, Ronald G.↗
NASA NTRS2000

Analysis of the Meteorology Associated with the 1998 NASA Glenn Twin Otter Icing Flights

This document contains a basic analysis of the meteorology associated with the NASA Glenn Twin Otter icing encounters between December 1997 and March 1998. The purpose of this analysis is to provide a meteorological context for the aircraft data collected during these flights. For each case, the following data elements are presented: (1) A brief overview of the Twin Otter encounter, including locations, liquid water contents, temperatures and microphysical makeup of the clouds and precipitation aloft, (2) Upper-air charts, providing hand-analyzed locations of lows, troughs, ridges, saturated/unsaturated air, temperatures, warm/cold advection, and jet streams, (3) Balloon-borne soundings, providing vertical profiles of temperature, moisture and winds, (4) Infrared and visible satellite data, providing cloud locations and cloud top temperature, (5) 3-hourly surface charts, providing hand-analyzed locations of lows, highs, fronts, precipitation (including type) and cloud cover, (6) Hourly, regional radar mosaics, providing fine resolution of the locations of precipitation (including intensity and type), pilot reports of icing (including intensity and type), surface observations of precipitation type and Twin Otter tracks for a one hour window centered on the time of the radar data, and (7) Hourly plots of icing pilot reports, providing the icing intensity, icing type, icing altitudes and aircraft type. Outages occurred in nearly every dataset at some point. All relevant data that was available is presented here. All times are in UTC and all heights are in feet above mean sea level (MSL).

Bernstein, Ben C.↗
NASA NTRS2012

Genesis of Twin Tropical Cyclones as Revealed by a Global Mesoscale Model: The Role of Mixed Rossby Gravity Waves

In this study, it is proposed that twin tropical cyclones (TCs), Kesiny and 01A, in May 2002 formed in association with the scale interactions of three gyres that appeared as a convectively-coupled mixed Rossby gravity (ccMRG) wave during an active phase of the Madden-Julian Oscillation (MJO). This is shown by analyzing observational data and performing simulations using a global mesoscale model. A 10-day control run is initialized at 0000 UTC 1 May 2002 with grid-scale condensation but no cumulus parameterizations. The ccMRG wave was identified as encompassing two developing and one non-developing gyres, the first two of which intensified and evolved into the twin TCs. The control run is able to reproduce the evolution of the ccMRG wave and the formation of the twin TCs about two and five days in advance as well as their subsequent intensity evolution and movement within an 8-10 day period. Five additional 10-day sensitivity experiments with different model configurations are conducted to help understand the interaction of the three gyres. These experiments suggest the improved lead time in the control run may be attributed to the realistic simulation of the ccMRG wave with the following processes: (I) wave deepening associated with wave shortening and/or the intensification of individual gyres, (2) poleward movement of gyres that may be associated with bOlll1dary layer processes, (3) realistic simulation of moist processes at regional scales in association with each of the gyres, and (4) the vertical phasing of low- and mid-level cyclonic circulations associated with a specific gyre.

Shen, Bo-Wen↗
NASA NTRSDate not supplied

Earth System Digital Twins (ESDT) Technology for NASA Earth Science

For NASA's Advanced Information Systems Technology (AIST) Program, an Earth System Digital Twin (ESDT) is defined as an interactive and integrated multidomain, multiscale, digital replica of the state and temporal evolution of Earth systems. It dynamically integrates: relevant Earth system models and simulations; other relevant models (e.g., related to the world's infrastructure); continuous and timely (including near real time and direct readout) observations (e.g., space, air, ground, over/underwater, Internet of Things (IoT), socioeconomic); long-time records; as well as analytics and artificial intelligence tools. Effective ESDTs enable users to run hypothetical scenarios to improve the understanding, prediction of and mitigation/response to Earth system processes, natural phenomena and human activities as well as their many interactions. An ESDT is a type of integrated information system that, for example, enables continuous assessment of impact from naturally occurring and/or human activities on physical and natural environments. AIST ESDT strategic goals are to: 1. Develop information system frameworks to provide continuous and accurate representations of systems as they change over time; 2. Mirror various Earth Science systems and utilize the combination of Data Analytics, Artificial Intelligence, Digital Thread, and state-of-the-art models to help predict the Earth’s response to various phenomena; 3. Provide the tools to conduct "what if" investigations that can result in actionable predictions. The AIST ESDT thrust is developing capabilities toward the development of future digital twins of the Earth or of subcomponents of the Earth. This will enable the development of an overarching framework that will integrate New Observing Strategies (NOS) to enable new observation measurements, i.e., multi-source, coordinated, dynamic and responsive to needs and requests defined by Analytic Collaborative Frameworks (ACF) that enable agile science investigations fusing and analyzing very large amounts of diverse data. NOS and ACF capabilities along with open access to various science, infrastructure and human data, interconnected modeling, data assimilation, simulations, surrogate modeling, high-performance computing and advanced visualization, will define a powerful framework that could be utilized for local, regional or global and/or thematic digital twins. This presentation will describe a general overview of the AIST ESDT vision including prior work done in the areas of NOS and ACF as well as current and upcoming ESDT projects.

Jacqueline Le Moigne↗
NASA NTRS2022

Terrestrial Exospheric Dayside H-density Profile at 3 - 15 RE from UVIS/HDAC and TWINS Lyman-alpha Data Combined

Terrestrial ecliptic dayside observations of the exospheric Lyman-α column intensity between 3–15 Earth radii (RE) by UVIS/HDAC (UVIS – ultraviolet imaging spectrograph; HDAC – hydrogen-deuterium absorption cell) Lyman-α photometer at CASSINI have been analyzed to derive the neutral exospheric H-density profile at the Earth’s ecliptic dayside in this radial range. The data were measured during CASSINI’s swing-by maneuver at the Earth on 18 August 1999 and are published by Werner et al. (2004). In this study the dayside HDAC Lyman-α observations published by Werner et al. (2004) are compared to calculated Lyman-α intensities based on the 3D H-density model derived from TWINS (Two Wide-angle Imaging Neutral-atom Spectrometers) Lyman-α observations between 2008–2010 (Zoennchen et al., 2015). It was found that both Lyman-α profiles show a very similar radial dependence in particular between 3–8RE. Between 3.0–5.5RE impact distance Lyman-α observations of both TWINS and UVIS/HDAC exist at the ecliptic dayside. In this overlapping region the cross-calibration of the HDAC profile against the calculated TWINS profile was done, assuming that the exosphere there was similar for both due to comparable space weather conditions. As a result of the cross-calibration the conversion factor between counts per second and rayleigh, fc = 3.285 counts s−1R−1, is determined for these HDAC observations. Using this factor, the radial H-density profile for the Earth’s ecliptic dayside was derived from the UVIS/HDAC observations, which constrained the neutral H density there at 10RE to a value of 35 cm-3. Furthermore, a faster radial H-density decrease was found at distances above 8RE (≈r−2.37) compared to the lower distances of 3–7RE (≈r−2.37). This increased loss of neutral H above 8RE might indicate a higher rate of H ionization in the vicinity of the magnetopause at 9–11RE (near subsolar point) and beyond, because of increasing charge exchange interactions of exospheric H atoms with solar wind ions outside the magnetosphere.

Jochen H Zoennchen↗
NASA NTRS2024

Transfer-AE: A novel autoencoder-based impact detection model for structural digital twin

Accurately detecting the location and intensity of impacts is crucial for ensuring structural safety. Currently, AI-based structural impact detection methods are widely used for their excellent detection accuracy. However, their generalization capability is limited by the scenarios present in the training data. Many complex and dangerous impact scenarios are difficult to conduct real-world experiments on to collect sufficient samples. To capture all impact scenarios and fully leverage the advantages of AI-based detection technologies, advanced methods involve combining real-world structural monitoring data with corresponding numerical models to construct digital twins. These methods continuously refine the created numerical models with limited real-world data and provide diverse impact scenarios through numerical model simulations. However, there are inevitable differences between digital models and physical models that are challenging to correct through mechanical means. This discrepancy in data distribution between the two models significantly hinders the application of digital twin technology in impact/event identification tasks. To address this challenge, this study proposes a novel model based on autoencoders, named Transfer-AE. Transfer-AE encodes the common features of digital twins in the latent space to bridge the uncertainty gap at a macro scale between numerical models and physical models and synchronously fits the magnitude and location of the impact load in the decoder. This enables consistent detection results for the same impact event, whether the sample comes from the numerical model or the physical model. Transfer-AE includes two operating modes: Mode 1 has a fixed computational complexity with stable inference speed, but the training cost and difficulty increase with data distribution. Mode 2's computational complexity increases with data distribution, but it has a fixed training cost and speed. In both cases involving the geodesic dome structure simulating a deep space habitat and the IASC-ASCE benchmark structure, Transfer-AE demonstrated the best performance in impact localization and quantification tasks compared to mainstream domain-adaptive transfer models.

Chengjia Han↗
NASA NTRSDate not supplied

Effect of Alloying Additions on Twinning in Ni-Based Superalloys

Micro-twinning is the dominant creep deformation mechanism in Ni-based superalloys at temperatures above 700 C. We use atomistic simulations to study two mechanisms of twin nucleation and growth that are characterized by qualitatively different rate limiting processes. In case of the mechanism proposed by Kolbe, the rate limiting process is diffusion-mediated atomic reshuffling. In case of the other mechanism, we proposed recently, the rate limiting process is nucleation of Shockley partial dislocation. We demonstrate the effects of alloying additions on functionality of these mechanisms.

Ni-based superalloys↗
NASA NTRSDate not supplied

Development of Digital Twin Technologies for Climate Projections

Climate projections are increasingly needed for adaptation, climate resilience and related decision making. However, existing projections have systematic biases, are limited in scope, and are not readily available for most potential users. While the ideal of an observational data-driven ‘digital twin’ for climate is initially attractive, there is only a very limited set of climate data available with which to train such a tool. Nonetheless, we are confident that there is a role for ‘digital twin technologies’ in removing biases, increasing computational efficiency, expanding scenarios and data accessibility.

digital twins↗
NASA NTRS2024

Digital Twins of the Environment

Please download and open the zip folder on your system to view the talks. As part of AI-UK'2024 (organized by UK Turing Institute), Jacqueline Le Moigne and Robert Morris (NASA ARC AIST Associate) were part of a Panel on "Digital Twins of the Environment". We described what Earth System Digital Twins (ESDTs) are, how they could be used in the future, which technologies need to be developed for these ESDTs to become a reality and what the state-of-the-art is. No formal presentations were given but 2 videos were generated during the conference and will be posted on the AI-UK website: https://www.turing.ac.uk/events/ai-uk-2024. The 2 videos cover: (1) a recording of the entire Panel featuring Robert Morris/NASA ARC and Jacqueline Le Moigne/ESTOl; (2) a post-panel interview of Jacqueline Le Moigne.

Earth Science Remote Sensing↗
NASA NTRSDate not supplied

Overview of the National Airspace System (NAS) Digital Twin Simulation Environment

The National Airspace System (NAS) Digital Twin is an environment for building and running diverse, realistic simulations of current or future airspace operations. The environment allows for many different types of simulations including both fast-time and real-time operating modes. Playback of historical or live NAS traffic can be combined with simulated aircraft to create a detailed, live, virtual, and constructive environment. These capabilities go together to create an environment that allows for development of concepts through the entire Technology Readiness Levels scale from initial concept to field evaluations. This extended abstract will discuss details of the software-foundations of the NAS Digital Twin environment. Then, several example simulations and analyses will be presented to illustrate the breadth and power of the tool.

airspace simulation, digital twin↗
NASA NTRSDate not supplied

Overview of the National Airspace System (NAS) Digital Twin Simulation Environment

The National Airspace System (NAS) Digital Twin is an environment for building and running diverse, realistic simulations of current or future airspace operations. The environment allows for many different types of simulations including both fast-time and real-time operating modes. Playback of historical or live NAS traffic can be combined with simulated aircraft to create a detailed, live, virtual, and constructive environment. These capabilities go together to create an environment that allows for development of concepts through the entire Technology Readiness Levels scale from initial concept to field evaluations. This extended abstract will discuss details of the software-foundations of the NAS Digital Twin environment. Then, several example simulations and analyses will be presented to illustrate the breadth and power of the tool.

airspace simulation↗
NASA NTRSDate not supplied

Somatic Mutation Analysis in Spaceflight: NASA Twins Genome Study

The NASA Twins Genome Study investigates the effects of spaceflight on somatic mutation accumulation by comparing genome-wide sequence data from a spaceflight astronaut and his Earth-bound twin. Utilizing advanced computational software on high performance computers, this study identifies and maps somatic mutations, with implications for understanding spaceflight-associated health risks, including cancer, neurodegeneration, and cardiovascular disease. The findings aim to bridge rodent and human space research, offering insights into tissue-specific pathophysiology, risk models, and potential therapeutic interventions.

somatic mutation↗
NASA NTRS1968

Twin solution calorimeter determines heats of formation of alloys at high temperatures

Calvert-type, twin liquid metal solution calorimeter determines the heats of formation of transition metal alloys at high temperatures. The twin differential calorimeter measures the small heat effects generated over extended periods of time, has maximum operating temperature of 1073 degrees K and an automatic data recording system.

Darby, J. B., Jr.↗
NASA NTRS1974

Interference between exhaust system and afterbody of twin-engine fuselage configurations

Some of the mutual aircraft afterbody and engine nozzle interferences that can exist on aircraft complex aft-ends and on simplified twin-jet afterbodies are reviewed. Emphasis is placed on studies of twin-engine fuselage configurations with nozzles installed near the terminus of the afterbody where the interactions of the nozzle exhausts and external stream produce a complex flow-field environment. The magnitude of the aft-end problem for real aircraft configurations is illustrated, and some theoretical and empirical considerations of afterbody drag on simple bodies are treated. Many of the factors regarding airframe-installation effects on nozzle performance are discussed, as well as nozzle-installation effects on aircraft performance.

Runckel, J. F.↗
NASA NTRS1975

Aerodynamic testing technique for twin fuselage models at hypersonic speeds

A testing technique for obtaining the static aerodynamic characteristics of twin-fuselage configurations at hypersonic speeds by using a conventional single-balance installation has been evaluated. Data from a triple-fuselage model and a single-fuselage model were summed and then halved to obtain the characteristics for a twin-fuselage model of the same scale. The three related models were evaluated experimentally at Mach 20.3 in helium and Mach 6 in air for an angle-of-attack range from minus 6 deg to 50 deg. The Reynolds numbers, based on model length, were 1.88 million for the Mach 20.3 tests and 2.55 million for the Mach 6 tests.

Ashby, G. C., Jr.↗