Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “third harmonic generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enhancement of harmonic generation by an intense driving laser with high-order waveguide modes in a high-pressure gas-filled hollow waveguide

High-order harmonics have been widely used as reliable tabletop coherent radiation sources recently, but their applications have often been limited by the available pulse energy. Here, we report that by using an overdriven intense laser in a long waveguide with high-pressure gas, phase matching can be achieved in three distinct “regimes”. In the third regime, favorable phase matching is achieved at near-axis positions to enhance harmonic yields. Our results are supported by a full theoretical analysis, and we demonstrate that coupling of the driving laser with the high-order waveguide modes (instead of the fundamental mode used in most prior experiments) is responsible for achieving phase matching. Furthermore, we establish that this phase matching (and harmonic enhancement) is robust, and a scaling relation is derived for the necessary waveguide and gas parameters, allowing our predictions to be tested immediately in any laboratory today.

Li, Baochang [Nanjing University of Science and Te↗
NASA NTRS1975

Observations of Mercury's magnetic field

Magnetic field data obtained by Mariner 10 during the third and final encounter with the planet Mercury on 16 March 1975 were studied. A well developed bow shock and modest magnetosphere, previously observed at first encounter on 29 March 1974, were again observed. In addition, a much stronger magnetic field near closest approach, 400 gamma versus 98 gamma, was observed at an altitude of 327 km and approximately 70 deg north Mercurian latitude. Spherical harmonic analysis of the data provide an estimate of the centered planetary magnetic dipole of 4.7 x 10 to the 22nd power Gauss/cu cm with the axis tilted 12 deg to the rotation axis and in the same sense as Earth's. The interplanetary field was sufficiently different between first and third encounters that in addition to the very large field magnitude observed, it argues strongly against a complex induction process generating the observed planetary field. While a possibility exists that Mercury possesses a remanent field due to magnetization early in its formation, a present day active dynamo seems to be a more likely candidate for its origin.

Ness, N. F.↗
NASA NTRS2016

Improving Power Density of Free-Piston Stirling Engines

Analyses and experiments demonstrate the potential benefits of optimizing piston and displacer motion in a free-piston Stirling Engine. Isothermal analysis shows the theoretical limits of power density improvement due to ideal motion in ideal Stirling engines. More realistic models based on nodal analysis show that ideal piston and displacer waveforms are not optimal, often producing less power than engines that use sinusoidal piston and displacer motion. Constrained optimization using nodal analysis predicts that Stirling engine power density can be increased by as much as 58 percent using optimized higher harmonic piston and displacer motion. An experiment is conducted in which an engine designed for sinusoidal motion is forced to operate with both second and third harmonics, resulting in a piston power increase of as much as 14 percent. Analytical predictions are compared to experimental data and show close agreement with indirect thermodynamic power calculations, but poor agreement with direct electrical power measurements.

aerospace engineering↗
DOE OSTI2023

Large Enhancements in Optical and Piezoelectric Properties in Ferroelectric Zn 1- x Mg x O Thin Films through Engineering Electronic and Ionic Anharmonicities

Multifunctionality as a paradigm requires materials exhibiting multiple superior properties. Integrating second-order optical nonlinearity and large bandgap with piezoelectricity can, for example, enable broadband, strain-tunable photonics. Though very different phenomena at distinct frequencies, both second-order optical nonlinearity and piezoelectricity are third-rank polar tensors present only in acentric crystal structures. However, simultaneously enhancing both phenomena is highly challenging since it involves competing effects with tradeoffs. Recently, a large switchable ferroelectric polarization of ≈80 μC cm –2 was reported in Zn 1-x Mg x O films. Here, ferroelectric Zn 1-x Mg x O is demonstrated to be a platform that hosts simultaneously a 30% increase in the electronic bandgap, a 50% enhancement in the second harmonic generation (SHG) coefficients, and a near 200% improvement in the piezoelectric coefficients over pure ZnO. These enhancements are shown to be due to a 400% increase in the electronic anharmonicity and a ≈200% decrease in the ionic anharmonicity with Mg substitution. Precisely controllable periodic ferroelectric domain gratings are demonstrated down to 800 nm domain width, enabling ultraviolet quasi-phase-matched optical harmonic generation as well as domain-engineered piezoelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Community Solar Project Models: An Introduction to Basic Financial and Administrative Relationships [Slides]

This resource is a collection of visual aids and descriptions to help explain the basic financial and administrative relationships underpinning common community solar project models. The graphics in this resource depict the flow of electricity from generation to consumption and the financial exchanges between the community solar project owner, subscribers, and distribution utility. Community solar models vary based on ownership (e.g., third party, utility), customer type (e.g., multifamily, single-household), and solar array location (e.g., on-site, off-site).

14 SOLAR ENERGY↗
NASA NTRS1987

Third and higher harmonic plasma emission due to Raman scattering

The theory for third and higher harmonic plasma emission by the weak turbulence (or random phase) process L + T prime to T (where L denotes a Langmuir wave, and T and T prime denote transverse waves) is developed. Kinematic constraints on the characteristics and growth lengths of waves participating in the wave processes are identified. The cases of L waves produced either directly by a streaming instability, or by the decay L to L prime + S (S is an ion sound wave) of L waves generated by a streaming instability, are considered. Limits on the brightness temperature of the radiation are determined, and expressions for the growth rate and path-integrated wave temperatures are derived.

Cairns, Iver H.↗
NASA NTRS1992

Direct numerical simulations of a spatially developing plane wake

In the present paper, direct numerical methods by which to simulate the spatially developing free shear flows in the transitional region are described and the numerical results of a spatially developing plane wake are presented. The incompressible time-dependent Navier-Stokes equations were solved using Pade finite difference approximations in the streamwise direction, a mapped pseudospectral Fourier method in the cross-stream direction, and a third-order compact Runge-Kutta scheme for time advancement. The unstable modes of the Orr-Sommerfeld equations were used to perturb the inlet of the wake. Statistical analyses were performed and some numerical results were compared with experimental measurements. When only the fundamental mode is forced, the energy spectra show amplification of the fundamental and its higher harmonics. In this case, unperturbed alternate vortices develop in the saturation region of the wake. The phase jitter around the fundamental frequency plays a critical role in generating vortices of random shape and spacing. Large- and small-scale distortions of the fundamental structure are observed. Pairing of vortices of the same sign is observed, as well as vortex coupling of vortices of the opposite sign.

Maekawa, Hiroshi↗
NASA NTRS1988

Unsteady transonic airfoil computation using implicit Euler scheme on body-fixed grid

The unsteady Euler equations have been derived for the flow relative motion with respect to a frame of reference that is rigidly attached to the moving airfoil. The grid is generated once by an elliptic solver without a need for dynamic grid computation. An implicit factored finite-volume scheme has been developed and implemented through a fully vectorized computer program. Implicit second-order and explicit second and fourth-order dissipations are added to the scheme. The boundary conditions are explicitly satisfied. The scheme is applied to steady and unsteady transonic airfoil flows and the results are in good agreement with the experimental data. For forced harmonic airfoil motions, periodic solutions are achieved within the third cycle of oscillation.

Kandil, Osama A.↗
DOE OSTI2021

Order-of-magnitude laser imprint reduction using pre-expanded high-Z coatings on targets driven by a third harmonic Nd:glass laser

A hybrid early time x-ray drive followed by conventional laser direct drive obtained by utilizing a thin high-Z overcoat on plastic ablator targets has proven to be very effective at reducing laser imprint in experiments driven by the Nike krypton-fluoride laser. An inherent low level laser prepulse from that laser system heated and expanded the coating prior to the main pulse. Here, we report on results using a frequency tripled Nd:glass laser system (Omega EP) where the inherent prepulse was several orders of magnitude smaller. By applying a separate prepulse, these experiments allowed us to test if the prepulse is important for mitigating imprint with the high-Z layer. The results show that the high-Z coating is much more effective at reducing laser imprint when it is pre-expanded, in this case, by an externally generated low level soft x-ray prepulse of ∼10 J/cm2. With the x-ray prepulse, laser imprint at spatial wavelengths below 100 μm was reduced by an order of magnitude, similar to that observed with the laser prepulse on Nike. Furthermore, the experiments here establish that high-Z coating is effective in reducing imprint even in the case of a fixed speckle pattern. Rayleigh–Taylor-amplified laser imprint and high-Z layer dynamics were measured using through-foil and side-on x-ray radiography. Pre-expansion times from 30 down to 6 ns were effective, potentially compatible with laser prepulse generation using existing NIF and OMEGA front ends; however, temporal beam smoothing appears to be necessary for the laser prepulse that directly illuminates the high-Z coating. The highest imprint reduction is observed for Pd and Au coatings of at least 400 Å thickness; thicknesses down to 200 Å show a reduction in imprint with an adjusted prepulse.

Karasik, Max (ORCID:0000000162354670)↗
NASA NTRS1993

Optimum wavelengths for two color ranging

The range uncertainties associated with the refractive atmosphere can be mitigated by the technique of two color, or dual wavelength, ranging. The precision of the differential time of flight (DTOF) measurement depends on the atmospheric dispersion between the two wavelengths, the received pulsewidths and photoelectron counts, and on the amount of temporal averaging. In general, the transmitted wavelengths are not independently chosen but instead are generated via nonlinear optics techniques (harmonic crystals, Raman scattering, etc.) which also determine their relative pulsewidths. The mean received photoelectrons at each wavelength are calculated via the familiar radar link equation which contains several wavelength dependent parameters. By collecting the various wavelength dependent terms, one can define a wavelength figure of merit for a two color laser ranging system. In this paper, we apply the wavelength figure of merit to the case of an extremely clear atmosphere and draw several conclusions regarding the relative merits of fundamental-second harmonic, fundamental-third harmonic, second-third harmonic, and Raman two color systems. We find that, in spite of the larger dispersion between wavelengths, fundamental-third harmonic systems have the lowest figure of merit due to a combination of poor detector performance at the fundamental and poor atmospheric transmission at the third harmonic. The fundamental-second harmonic systems (approximately 700 nm and 350 nm) have the highest figure of merit, but second-third harmonic systems, using fundamental transmitters near 1000 nm, are a close second. Raman-shifted transmitters appear to offer no advantage over harmonic systems because of the relatively small wavelength separation that can be achieved in light gases such as hydrogen and the lack of good ultrashort pulse transmitters with an optimum fundamental wavelength near 400 nm.

Degnan, John J.↗
DOE OSTI2020

Metrology of Time-Domain Soft X-Ray Attosecond Pulses and Reevaluation of Pulse Durations of Three Recent Experiments

Attosecond pulses in the soft x-ray (SXR) to water-window energy region offer the tools for creating and studying target-specific localized inner-shell electrons or holes in materials, enabling monitoring or controlling charge and energy flows in a dynamic system on attosecond timescales. Recently, a number of laboratories have reported generation of continuum harmonics in the hundred-electron-volt to kilovolt region with few-cycle long-wavelength mid-infrared lasers. These harmonics have the bandwidth to support pulses with durations of a few to a few-ten attoseconds. But harmonics generated in a gas medium have attochirps that cannot be fully compensated by materials over a broad spectral range; thus, realistically what are the typical shortest attosecond pulses that one can generate? To answer this question, it is essential that the temporal attosecond pulses be accurately characterized. By reanalyzing the soft x-ray attosecond metrology reported in three recent experiments using a newly developed broadband phase retrieval algorithm, we demonstrate here that the generated attosecond pulses in the first two papers have durations of about 60 as, longer than what they have reported. Similarly, the duration from the third experiment is retrieved to be about half of the 322-as upper limit cited in that work. We also introduce the autocorrelation (AC) of the streaking spectrogram. By comparing the ACs from the experiments and from the retrieved SXR pulses, the accuracy of the retrieved results can be directly visualized. Our retrieval method is fast and accurate, and it shall provide a powerful tool for the metrology of the emerging few-ten-attosecond pulses.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

6 MeV novel hybrid (standing wave - traveling wave) photo-cathode electron gun for a THz superradiant FEL

A novel 6 MeV hybrid photo-injector has been designed and constructed, based on a smaller-scale prototype previously built in UCLA’s Particle Beam Physics Laboratory. It has been commissioned at Ariel University in Israel as an on-going collaboration between the two universities. This unique, new generation design provides a radically simpler approach to RF feeding of a gun/buncher system, leading to a much shorter beam via velocity bunching owed to an attached traveling wave section of the photo-injector. This design offers better performance in beam parameters, providing a high quality electron beam, with energy of 6 MeV. The hybrid photo-injector was designed to provide emittance of approximately 3 μm, and pulse duration of 150 fs at up to 1 nC per pulse. The hybrid gun is driven by a SLAC XK5 klystron as the high power RF source, and third harmonic of a ~35 fs IR Laser amplifier (266 nm) to extract electrons from the photo-cathode. The unique electron gun will produce a bunched electron pulse to drive a THz FEL, which will operate at the super-radiant regime, and therefore requires ambitious beam properties. This paper describes the gun and presents experimental results from the gun and its sub-systems, including energy and charge measurements, compared with the design simulations.

150fs↗
NASA NTRS1980

On the phase-locked polarization variations in Cygnus X-1

The paper presents data on the accumulated V-band orbital phase curves of polarization in Cygnus X-1 which disagree with the analysis of Simmons, Aspin, and Brown (1980). No curves which conform to the canonical model were observed, and a noncanonical structure is indicated by F tests on third, fourth, and fifth harmonics, which have a probability of 0.85 as a group. The fifth harmonic has a probability of 0.99; in contrast, the fundamental harmonic has a probability of only 0.6, which is below the detection threshold. Therefore, major conclusions of Simmons et al based on a nonsymmetrical canonical model assuming that fundamental harmonics are present, but harmonics with n greater than 2 are absent, are unacceptable. Analysis of the author's data by Simmons et al is criticized on the grounds that he did not take into account the cumulative aspects of the data and did not recognize the need to average out the random noise generated by Cygnus X-1 over many orbital cycles.

Kemp, J. C.↗
NASA NTRS1995

Enhancements to the SSME transfer function modeling code

This report details the results of a one year effort by Ohio University to apply the transfer function modeling and analysis tools developed under NASA Grant NAG8-167 (Irwin, 1992), (Bartholomew, 1992) to attempt the generation of Space Shuttle Main Engine High Pressure Turbopump transfer functions from time domain data. In addition, new enhancements to the transfer function modeling codes which enhance the code functionality are presented, along with some ideas for improved modeling methods and future work. Section 2 contains a review of the analytical background used to generate transfer functions with the SSME transfer function modeling software. Section 2.1 presents the 'ratio method' developed for obtaining models of systems that are subject to single unmeasured excitation sources and have two or more measured output signals. Since most of the models developed during the investigation use the Eigensystem Realization Algorithm (ERA) for model generation, Section 2.2 presents an introduction of ERA, and Section 2.3 describes how it can be used to model spectral quantities. Section 2.4 details the Residue Identification Algorithm (RID) including the use of Constrained Least Squares (CLS) and Total Least Squares (TLS). Most of this information can be found in the report (and is repeated for convenience). Section 3 chronicles the effort of applying the SSME transfer function modeling codes to the a51p394.dat and a51p1294.dat time data files to generate transfer functions from the unmeasured input to the 129.4 degree sensor output. Included are transfer function modeling attempts using five methods. The first method is a direct application of the SSME codes to the data files and the second method uses the underlying trends in the spectral density estimates to form transfer function models with less clustering of poles and zeros than the models obtained by the direct method. In the third approach, the time data is low pass filtered prior to the modeling process in an effort to filter out high frequency characteristics. The fourth method removes the presumed system excitation and its harmonics in order to investigate the effects of the excitation on the modeling process. The fifth method is an attempt to apply constrained RID to obtain better transfer functions through more accurate modeling over certain frequency ranges. Section 4 presents some new C main files which were created to round out the functionality of the existing SSME transfer function modeling code. It is now possible to go from time data to transfer function models using only the C codes; it is not necessary to rely on external software. The new C main files and instructions for their use are included. Section 5 presents current and future enhancements to the XPLOT graphics program which was delivered with the initial software. Several new features which have been added to the program are detailed in the first part of this section. The remainder of Section 5 then lists some possible features which may be added in the future. Section 6 contains the conclusion section of this report. Section 6.1 is an overview of the work including a summary and observations relating to finding transfer functions with the SSME code. Section 6.2 contains information relating to future work on the project.

Irwin, R. Dennis↗
NASA NTRS1995

Growth of single crystals of organic salts with large second-order optical nonlinearities by solution processes for devices

Data obtained from the electric field induced second harmonic generation (EFISH) and Kurtz Powder Methods will be provided to MSFC for further refinement of their method. A theoretical model for predicting the second-order nonlinearities of organic salts is being worked on. Another task is the synthesis of a number of salts with various counterions. Several salts with promising SHG activities and new salts will be tested for the presence of two crystalline forms. The materials will be recrystallized from dry and wet solvents and compared for SHG efficiency. Salts that have a high SHG efficiency and no tendency to form hydrates will be documented. The synthesis of these materials are included in this report. A third task involves method to aid in the growth of large, high quality single crystals by solution processes. These crystals will be characterized for their applicability in the fabrication of devices that will be incorporated into optical computers in future programs. Single crystals of optimum quality may be obtained by crystal growth in low-gravity. The final task is the design of a temperature lowering single crystal growth apparatus for ground based work. At least one prototype will be built.

Leslie, Thomas M.↗
DOE OSTI2023

A Voltage Injection-Based Current Harmonics Suppression Strategy for Six-Phase PMSM With Nonsinusoidal Back EMF

This article presents a voltage injection-based current harmonic minimization method for wide bandgap device-based six-phase permanent magnet synchronous machine (PMSM) drives. The presence of low-order harmonics is common in the back EMF of PMSMs with low slot and high pole numbers. The back EMF harmonics generate low-order harmonic currents that increase torque ripples. Furthermore, zero-sequence current (ZSC) is also observed if all six phases are connected to a common neutral point. ZSC does not affect the torque ripple but reduces the system efficiency. A special technique is required to reduce ZSC for variable speed drives as direct ac component to synchronous reference frame (SRF) dc transformation is not possible for ZSC. In this article, a voltage injection-based current harmonics reduction method is proposed. The injected harmonic voltage coefficients are calculated from the harmonic estimations of back EMF and updated using closed-loop harmonic compensators to improve steady-state performance. For ZSC reduction, third harmonics power controller, and for 6n ± 1 (n = 1, 2,...) order harmonic current reduction, SRF current controllers are presented in this article. Furthermore, the current harmonics minimization method is experimentally verified using a GaN-based three-level active neutral point clamped inverter-driven six-phase PMSM.

42 ENGINEERING↗
NASA NTRS2014

Elastic Constants of Solids and Fluids with Initial Pressure via a Unified Approach Based on Equations-of-State

The second and third-order Brugger elastic constants are obtained for liquids and ideal gases having an initial hydrostatic pressure p(sub 1). For liquids the second-order elastic constants are C(sub 11) = A + p(sub 1), C(sub 12) = A -- p(sub 1), and the third-order constants are C(sub 111) = --(B + 5A + 3p(sub 1)), C(sub 112) = --(B + A -- p(sub 1)), and C(sub 123) = A -- B -- p1, where A and B are the Beyer expansion coefficients in the liquid equation of state. For ideal gases the second order constants are C(sub 11) = p(sub 1)gamma + p9sub 1), C(sub 12) = p(sub 1)gamma -- p(sub 1), and the third-order constants are C(sub 111) = p(sub 1)(gamma(2) + 4gamma + 3), C(sub 112) = --p(sub 1)(gamma(2) -- 1), and C(sub 123) = --p(sub 1) (gamma(2) -- 2gamma + 1), where gamma is the ratio of specific heats. The inequality of C(sub 11) and C(sub 12) results in a nonzero shear constant C(sub 44) = (1/2)(C(sub 11) C(sub 12)) = p(sub 1) for both liquids and gases. For water at standard temperature and pressure the ratio of terms p1/A contributing to the second-order constants is approximately 4.3 x 10(-5). For atmospheric gases the ratio of corresponding terms is approximately 0.7. Analytical expressions that include initial stresses are derived for the material 'nonlinearity parameters' associated with harmonic generation and acoustoelasticity for fluids and solids of arbitrary crystal symmetry. The expressions are used to validate the relationships for the elastic constants of fluids.

Cantrell, John H.↗
DOE OSTI2025

Reinforcement Learning for In-Spill Optimization of the Mu2e Resonant Extraction: Compensating Non-Stationarity

We present design considerations and challenges for the fast machine learning component of a third-order resonant beam extraction regulation system being commissioned to deliver steady beam rates to the mu2e experiment at Fermilab. Dedicated quadrupoles drive the tune toward the 29/3 resonance each spill, extracting beam at kV multiwire septa. The overall Spill Regulation System consists of (1) a “slow” process using ~100-spill averages to adjust the base quad ramp infrequently, (2) a feedforward harmonic content compensator, and (3) the “fast” ML agent reacting during each ongoing spill with on-the-fly additive corrections to the sum of (1) and (2). We have demonstrated improved beam-rate steadying for a fast ML agent compared to a PID controller using a quasi-physical spill simulation, and demonstrated distillation of that simulation into a predictive surrogate model. Current work includes a data-and-training pipeline to generate data-aware surrogates with real-world dynamics, even as the dynamics shift unpredictably. The surrogates are to act as RL environments against which to train our fast ML control agents before deploying them on FPGA in the live system. Further current efforts focus on modeling and controlling beam loss around the storage ring, understanding additional available hardware inputs to the model, and the interplay of these with beam-steadying performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗