Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “terephthalic acid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

83 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Lignin-Derived Methoxyterephthalates for Performance-Advantaged Polymers and Plasticizers

Lignin-derived aromatic carboxylic acids can be produced from oxidative catalytic processes and are promising building blocks for performance-advantaged bioproducts that leverage their inherent heteroatom functionalities. Here, we synthesize 2-methoxyterephthalate and 2,6-dimethoxyterephthalate derivatives by electrochemical carboxylation of guaiacyl- and syringyl-derived lignin monomers obtained from the oxidative deconstruction of lignin. These methoxylated terephthalates are evaluated as comonomers in poly(ethylene terephthalate) (PET) and as plasticizers that could replace petrochemically-derived isophthalate and phthalate, respectively. Specifically, we copolymerize 2-methoxy- and 2,6-dimethoxyterephthalate with dimethyl terephthalate to form several PET copolymers, both of which enable the properties of PET to be tuned, with an incorporation beyond 25% producing amorphous polyesters. At 10 mol % loading in the copolymers, we demonstrate that the bioderived comonomers exhibit comparable behavior to isophthalic acid, a commonly used comonomer in PET, by lowering the crystallinity and melting temperature. Moreover, methoxyterephthalate esters (2-ethylhexyl and butyl) are compared to phthalate and terephthalate ester counterparts used as poly(vinyl chloride) (PVC) plasticizers. The bioderived plasticizers are comparable to the petroleum-derived incumbents in reducing the glass transition temperature and increasing the thermal stability of PVC. Furthermore, the dimethoxyterephthalic esters are expected to have an extended lifetime in the polymer matrix due to their lower volatility and lower diffusion coefficients calculated by molecular dynamic simulations. These results demonstrate that the isophthalate and phthalate components in polyesters and plasticizers, respectively, could be substituted with biobased methoxyterephthalate derivatives.

09 BIOMASS FUELS↗
DOE OSTI2023

Thermodynamic Properties of Aggregate Coated by Different Types of Waste Plastic: Adhesion and Moisture Resistance of Asphalt-Aggregate Systems

The utilization of acidic aggregates in hot-mix asphalt (HMA) is often inevitable due to the limited supply of locally available aggregates, posing a potential threat of moisture damage to asphalt pavements. In this regard, the use of urban waste plastic to coat the low-quality aggregates is a promising way to improve the moisture resistance. This study fundamentally evaluated the compatibility between asphalt and plastic-coated aggregate by measuring surface energy, and for the first time compared the effects of different types of waste plastic including high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene terephthalate (PET), polyvinyl chloride (PVC), and polypropylene (PP). The plastic-coating significantly altered the chemistry of aggregate surface by increasing the nonpolar components and reducing the polar components. Such changes remarkably increased the dry adhesion energy between asphalt and aggregate and enhanced the wettability of aggregate. For the acidic aggregates, the polymeric treatment could decrease the value of wet adhesive, which indicated the debonding tendency in the presence of water was reduced. Finally, the energy ratios of the asphalt-aggregate combinations significantly increased by the surface pretreatment, which proved the effect of waste plastic coating on improving the moisture damage resistance of asphalt mixtures. By comparison, the HDPE coating was the most effective way to enhance the compatibility with asphalt, followed by PP and LDPE coatings. The PVC and PET coatings were investigated as the least effective way. In conclusion, this study cannot only contribute to the potential large-scale utilization of waste plastic but also remove the obstacles of using large quantities of acidic natural aggregate in asphalt pavements.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Catabolic Powerhouse for Biorefineries: Characterization and Engineering Erwinia spp. Strain LJJL01 to Produce Bioproducts

Nonmodel microbial hosts can efficiently biotransform unconventional organic feedstocks into advanced bioproducts, leveraging their superior metabolic capabilities and resilience to process-relevant physicochemical conditions. In this study, we domesticated Erwinia spp. strain. LJJL01 (Er LJJL01) as a potent microbial chassis to advance the emerging biorefinery strategy for the valorization of lignin-rich biomass and plastic, thereby enabling the circular economy. The strain exhibits remarkable chemical tolerance and can biofunnel various substrates, including sugars, acids, polyols, and aromatics, in minimal salt media to produce native fine chemicals such as acetoin, 2,3-butanediol, and lactic acid. As a proof of concept, engineering this strain with advanced genetic tools enables the production of tailored high-value chemicals, such as cis,cis-muconate from plastic-derived terephthalate and polyhydroxybutyrate from lignocellulosic hydrolysate. We established Er LJJL01 as a potent microbial chassis for the green synthesis of bioproducts from unconventional organic feedstocks.

09 BIOMASS FUELS↗
DOE OSTI2023

Complex regulation in a Comamonas platform for diverse aromatic carbon metabolism

Critical to a sustainable energy future are microbial platforms that can process aromatic carbons from the largely untapped reservoir of lignin and plastic feedstocks. Comamonas species present promising bacterial candidates for such platforms because they can use a range of natural and xenobiotic aromatic compounds and often possess innate genetic constraints that avoid competition with sugars. However, the metabolic reactions of these species are underexplored, and the regulatory mechanisms are unknown. Here we identify multilevel regulation in the conversion of lignin-related natural aromatic compounds, 4-hydroxybenzoate and vanillate, and the plastics-related xenobiotic aromatic compound, terephthalate, in Comamonas testosteroni KF-1. Transcription-level regulation controls initial catabolism and cleavage, but metabolite-level thermodynamic regulation governs fluxes in central carbon metabolism. Quantitative 13 C mapping of tricarboxylic acid cycle and cataplerotic reactions elucidates key carbon routing not evident from enzyme abundance changes. This scheme of transcriptional activation coupled with metabolic fine-tuning challenges outcome predictions during metabolic manipulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structure of the Polymer Backbones in polyMOF Materials

The molecular connectivity of polymer–metal–organic framework (polyMOF) hybrid materials was investigated using density functional theory calculations and solid-state NMR spectroscopy. The architectural constraints that dictate the formation of polyMOFs were assessed by examining poly(1,4-benzenedicarboxylic acid) (pbdc) polymers in two archetypical MOF lattices (UiO-66 and IRMOF-1). Modeling of the polyMOFs showed that in the IRMOF-1-type lattice, six, seven, and eight methylene (–CH 2 –) groups between 1,4-benzenedicarboxylate (terephthalate, bdc 2– ) units can be accommodated without significant distortions, while in the UiO-66-type lattice, an optimal spacing of seven methylene groups between bdc 2– units is needed to minimize strain. Solid-state NMR supports these predictions and reveals pronounced spectral differences for the same polymer in the two polyMOF lattices. With seven methylene groups, polyUiO-66-7a shows 7 ± 3% of uncoordinated terephthalate linkers, while these are undetectable (<4%) in the corresponding polyIRMOF-1-7a. Additionally, NMR-detected backbone mobility is significantly higher in the polyIRMOF-1-7a than in the corresponding polyUiO-66-7a, again indicative of taut chains in the latter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effects of transparent conducting electrodes and hole transport layers on the performance of MAPbI 3 solar cells fabricated on PET substrates

Abstract This study investigates how the performance of perovskite solar cells (PSCs) made on polyethylene terephthalate (PET) substrates depends on transparent conducting electrodes (TCEs) and hole transport layers (HTLs). We fabricated PSCs using commercially available PET/TCEs and compared their performance with PSCs manufactured on Glass/indium tin oxide (ITO) substrates. Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) with varying levels of acidity and NiO nanoparticles were used as HTLs. The current density-voltage characteristics of PSCs made on PET/TCEs were found to be significantly lower when highly acidic PEDOT:PSS was used as the HTL. However, this was not observed for PSCs made on Glass/ITO. To investigate the interaction between HTL and TCE, atomic force microscopy was carried out after dipping the TCEs in PEDOT:PSS solutions of different acidity. X-ray photoelectron spectroscopy measurements further revealed differences in the chemical composition between ITO film on PET vs. on glass. Our results indicate that the performance of PSCs depends both on the TCE substrates and HTLs, which can be explained by their chemical interaction.

14 SOLAR ENERGY↗
DOE OSTI2025

Conversion of Waste PET Plastic to Aramid Fiber

A three-step synthesis was used to convert waste polyethylene terephthalate (PET) into the high value polymer, poly-para-phenylene terephthalamide (PPTA), used in the production of high strength aramid fiber, such as Kevlar. Improvements to the polymerization reaction by addition of calcium chloride to the solvent, N-methyl-2-pyrrolidone (NMP), and rigorous anhydrous conditions enabled the production of a PET-derived PPTA with a 4.15 dL/g inherent viscosity in sulfuric acid that is amenable to fiber spinning. PPTA fibers were spun using a wet spinning apparatus under varied process parameters to assess their impact on fiber surface morphology, diameter, and the mechanical properties of the fibers. Select fibers were subjected to a post-spinning heat treatment at 150 °C , which improved the tensile strength and modulus by 100% and 30%, respectively, relative to the as-spun fibers. Techno-economic and life cycle analyses were conducted to evaluate the economic feasibility and the life-cycle greenhouse gases (GHG) emissions of the approach. In conclusion, the results suggest the potential for up to a 30% cost reduction, and comparable GHG emissions against conventional petroleum-based processes.

Lifecycle Analysis↗
DOE OSTI2025

Using Machine Learning to Improve Thermostability of MHETase

Protein engineering is a field which utilizes proteins as tools, which has many useful applications in medicine, industry, biofuels and more.1 One such protein is MHETase, which is a protein that plays an important function in the degradation of polyethylene terephthalate (PET) plastics, which are commonly used in water and soda bottles.2 However, these proteins are adapted to work in specific conditions, and may not satisfy the desired properties that a new application would desire, or could be improved. For instance, a more thermostable MHETase would be more effective in the plastic degradation conditions.3 To make these desired changes, the primary structure of the protein is mutated, but there are many possible mutations and positions to mutate to make with the 20 canonical amino acids. Therefore, to narrow down the possibilities and to make the process of finding a thermostable MHETase variant, we used sequence design tools that are grounded in machine learning to find mutations that would improve thermostability of MHETase.4 In particular, we used the tools Protein MPNN and Fireprot to design a more thermostable MHETase enzyme. We then compiled these mutations into a library and grew these proteins using bacteria colonies, and measured their effectiveness using a fluorescent protein marker. Thermostable proteins and their marker would fold correctly and fluorescence would be seen, but if neither folded correctly then there would be no marker detected. We grew these proteins in bacteria and then intend to use these methods to evaluate their thermostability.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Using Machine Learning to Improve Thermostability of MHETase

Protein engineering is a field which utilizes proteins as tools, which has many useful applications in medicine, industry, biofuels and more. One such protein is MHETase, which is a protein that plays an important function in the degradation of polyethylene terephthalate (PET) plastics, which are commonly used in water and soda bottles.2 However, these proteins are adapted to work in specific conditions, and may not satisfy the desired properties that a new application would desire, or could be improved. For instance, a more thermostable MHETase would be more effective in the plastic degradation conditions.3 To make these desired changes, the primary structure of the protein is mutated, but there are many possible mutations and positions to mutate to make with the 20 canonical amino acids. Therefore, to narrow down the possibilities and to make the process of finding a thermostable MHETase variant, we used sequence design tools that are grounded in machine learning to find mutations that would improve thermostability of MHETase.4 In particular, we used the tools Protein MPNN and FireProt to design a more thermostable MHETase enzyme. We then compiled these mutations into a library and grew these proteins using bacteria colonies, and measured their effectiveness using a fluorescent protein marker. Thermostable proteins and their marker would fold correctly and fluorescence would be seen, but if neither folded correctly then there would be no marker detected. We grew these proteins in bacteria and then intend to use these methods to evaluate their thermostability.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Effect of pyrolysis operating conditions on the catalytic co‐pyrolysis of low‐density polyethylene and polyethylene terephthalate with zeolite catalysts

Abstract In this study, the catalytic (co‐)pyrolysis of low‐density polyethylene (LDPE) and polyethylene terephthalate (PET) with HZSM‐5 and HY zeolite catalysts was conducted in a micro‐pyrolysis reactor coupled to a two‐dimensional gas chromatography system. Pyrolysis operating conditions, such as the pyrolysis temperature, the catalyst to feedstock (CF) ratio, and the LDPE:PET ratio, were varied. It was found that for the co‐pyrolysis of LDPE and PET, HZSM‐5 led to higher yields of C2‐C4 olefins and monoaromatic products. Lower CF ratios increased the yield of C2‐C4 olefins for LDPE pyrolysis, but decreased benzene yield for PET pyrolysis, concomitant with an increased yield in benzoic acid. A lower temperature of 400°C which was sufficient for the pyrolysis of LDPE, led to incomplete conversion of PET. Surface response diagrams were used to visualize the impact of the various pyrolysis operating conditions on the yield of C2‐C4 olefins and BTEX, which serve as target products for the circular economy.

Okonsky, Sean Timothy↗
DOE OSTI2026

Oxidative Cascade Cyclization of 1,2-Dicyanoarenes by a Dicopper(I,I) Nitrite Complex to Phthalimide Ligands

The reactions of [Cu2(μ–κ 1:κ 1 -O2N)­DPFN]­[NTf2] (1; DPFN = 2,7-bis­(fluoro-di­(2-pyridyl)­methyl)-1,8-naphthyridine, NTf2 – = N­(SO2CF3)2 –) with 1,4-dicyanobenzene and 1,2-dicyanoarenes are discussed. Treatment of 1 with 1,4-dicyanobenzene produces a tetra-Cu­(I) terephthalate complex (2) and dinitrogen via a discrete CN triple bond cleavage at each cyano group. However, reactions of 1 with 1,2-dicyanoarenes appear to proceed via a cascade reaction involving two intertwined CN triple bond activations to yield a series of di-Cu­(I) phthalimides, [Cu2(μ–N­(CO)2(Ar))­DPFN]­[NTf2] (3-(Ar); Ar = 1,2-arylenes C6H4, 3-NO2C6H3, 4-NO2C6H3, 4-PrOC6H3, 3-NC5H3) and dinitrogen. The dicopper phthalimide bonding interaction in these compounds is robust enough to resist protonation by pentafluorophenol and alkylation by methyl triflate or benzyl chloride at the imide nitrogen. This characteristic presents an opportunity for postsynthetic modifications of the phthalimide ligand. Nevertheless, treatment of 3-(C 6 H 4 ) with bistriflimidic acid (HNTf2) results in release of the neutral phthalimide, making the dicopper core available to coordinate other ligands such as nitrite and thus, completing a stoichiometric cycle.

Fernandez, Jose Martinez↗