Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Predictive dynamic wetting, fluid–structure interaction simulations for braze run-out

Brazing and soldering are metallurgical joining techniques that use a wetting molten metal to create a joint between two faying surfaces. Here, the quality of the brazing process depends strongly on the wetting properties of the molten filler metal, namely the surface tension and contact angle, and the resulting joint can be susceptible to various defects, such as run-out and underfill, if the material properties or joining conditions are not suitable. In this work, we implement a finite element simulation to predict the formation of such defects in braze processes. This model incorporates both fluid–structure interaction through an arbitrary Eulerian–Lagrangian technique and free surface wetting through conformal decomposition finite element modeling. Upon validating our numerical simulations against experimental run-out studies on a silver-Kovar system, we then use the model to predict run-out and underfill in systems with variable surface tension, contact angles, and applied pressure. Finally, we consider variable joint/surface geometries and show how different geometrical configurations can help to mitigate run-out. This work aims to understand how brazing defects arise and validate a coupled wetting and fluid–structure interaction simulation that can be used for other industrial problems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning the fluid wetting dynamics on gold microstructures using photoactive compounds

This work demonstrates how photoactive compounds can be used to tune the surface chemistry, surface free energy, and the wetting velocity of fluids on Spiropyran functionalized surfaces with different surface microstructures. Evidence of this photowetting effect is based on data showing: (1) the cyclic changes in the static, advancing, and receding contact angles $\theta$ CA for multiple UV$\rightleftarrows$vis photoswitching cycles with both smooth and microstructured surfaces and (2) the changes in the fluid wicking velocity (via UV$\rightleftarrows$vis photoswitching) on different Spiropyran functionalized hemiwicking surfaces. X-ray photoelectron spectroscopy is used to determine the efficiency of photoswitching caused by the quality of the Spiropyran functionalization. Reversible photoisomerization of Spiropyran generates a gradient in surface free energy, resulting in a similar change in contact angle ($\theta$ CA ) in the photoswitchable surfaces. In conclusion, by incorporating these changes into the Owens-Wendt and Van Oss surface energy models, the energy of smooth Au surfaces can also be predicted for both UV and visible light irradiations, where reversible contact angle variations of $\Delta$$\theta$ CA ≈ 5–10° are achieved with both water and water-ethanol mixtures due to the conversion of SP to merocyanine, which corresponds to a total free energy change of ~13% on the photoswitchable surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Comprehensive Investigation into the Effect of a Low Surface Energy Treatment on Gas Hydrate, Asphaltene, and Wax Formation, Deposition, and Adhesion

The formation/precipitation and deposition of pipeline solids, such as gas hydrates, asphaltenes, and waxes have long plagued production fields. Given the vast differences in chemistries of these solids, any current prevention or mitigation strategy, particularly for cases in which multiple issues are a concern, is likely to involve an extensive assortment of chemical additives that are both costly and add complexity to the system. Surface treatments (coatings), on the other hand, present a relatively viable option for management strategies. A chemically and physically robust surface treatment with the ability to address deposition issues for multiple pipeline solids could not only decrease the operating expenditures for a field through material cost savings and obviation of downstream separation, but could also simplify produced fluids by eliminating additional chemicals from the mixture. The purpose of this study was to explore the feasibility of a particular surface treatment as part of a solids management strategy. This work used an omniphobic surface treatment to probe its effects on gas hydrate, asphaltene, and wax deposition. Specifically, an interfacial tensiometer (IFT) collected contact angle measurements for wettability studies. High-pressure rocking cells studied gas hydrate nucleation and deposition. A bench-scale flow loop quantified the deposition of oil and asphaltenes after a set time period. Finally, a mechanical shear device measured the adhesion force of wax deposits on untreated/treated surfaces. Static contact angle results showed that the omniphobic surface treatment had reduced surface interaction with water droplets in air, altering from the complete wetting on corroded surfaces to slightly hydrophobic conditions of greater than 100°. In addition, rocking-cell tests indicated that these omniphobic surface treatments may prevent gas hydrate deposition for up to 72 hours. The gas hydrate rocking-cell tests also demonstrated possible increases in induction time and occasional elimination of hydrate nucleation with the surface treatment. Finally, the surface treatment application, which also decreased surface roughness, showed that crude oil and asphaltene particles deposition, as well as the shear required to remove solidified wax deposits, could be reduced by a large factor. Overall, promising results were recorded for all major flow-assurance solids in the presence of the surface treatment.

Engineering↗
DOE OSTI2025

Porous Interlayers that Getter Surface-Segregating Species for Improved Silver Wetting, Adhesion, and Electrical Contact on Stainless Steel SOFC Components

Here, porous nickel interlayers or porous platinum interlayers were shown to promote the wetting, spreading, and adhesion of silver on alumina-forming ferritic stainless steel (AFFSS) and chromia-forming ferritic stainless steel (CFFSS). These interlayers resulted in dense, crack-free AFFSS|Ag-Ni|CFFSS and AFFSS|Ag-Pt|CFFSS braze joints that, after 300 h in 650 °C air, displayed shear strengths up to 70 MPa similar to, or larger than, those of AFFSS|Ag-CuO|CFFSS or AFFSS|Ag|CFFSS joints subjected to identical treatment. Similarly, after exposure to 25 cycles of (50 switches between) 12 h of 650 °C air and 12 h of 650 °C 4%H 2 –96%N 2 , AFFSS|Ag-Ni|CFFSS and AFFSS|Ag-Pt|CFFSS braze joints displayed shear strengths significantly larger than those of AFFSS|Ag-CuO|CFFSS or AFFSS|Ag|CFFSS joints subjected to identical treatment. In addition, nickel and platinum were found to chemically getter surface-segregating steel constituents, particularly Al from the AFFSS. As a result, Ag-Ni and Ag-Pt electrical contact resistances on AFFSS and CFFSS substrates were several orders of magnitude lower than those of conventional Ag-CuO reactive air brazes or Heraeus C8710 Ag contact pastes. Together, these results suggest that Ag-Pt and especially Ag-Ni may be useful for the fabrication of durable joints, seals, and/or electrical contacts in electrical/electrochemical devices exposed to high temperatures and/or variable oxygen partial pressure environments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Examining the peatland shrubification-evapotranspiration feedback following multi-decadal water table manipulation

Northern peatlands are globally important long-term sinks of carbon due to their predominantly saturated conditions. However, these ecosystems are expected to become drier with climate change, potentially leading to shrubification. As such, the response of the shrubification–evapotranspiration (ET) feedback may be of critical importance to future peatland energy, water and carbon dynamics. Here we examined the effect of multi-decadal peatland water table (WT) alteration at three adjacent sites with increasing depth to WT (WET, INTermediate, and DRY). In order to better understand the WT–shrubification–ET feedback, we measured peatland vegetation composition, microtopography and ET partitioning, where ET was measured at the ecosystem, microform, and leaf level using eddy covariance (EC), chambers and porometry, respectively. Averaged across microforms and WT treatments, there was a difference in the median measured leaf resistance (r leaf ) between plant functional types ranging from 213 s m -1 for erect dwarf shrubs, 325 s m -1 for graminoids/sedges, and 520 s m -1 for prostrate dwarf shrubs. Scaled based on LAI, the low r leaf of erect dwarf shrubs dominated hummocks, where sites with a higher proportion of hummocks had lower median canopy resistance (r v ) of 141, 133 and 130 s m -1 at the WET, INT and DRY sites respectively. Nevertheless, ET was highest at the WET site and similar between the INT and DRY sites, with greater evaporation from the moss surface at the WET site. Porometry and EC data along with a three-source model were used to independently assess the evaporative contribution from the moss surface, which ranged from 17% to 40%. For moderate and persistent changes in WT from land-use or climate change, our results suggest vegetation succession is minimal, but the microtopographic development and the concomitant differences in LAI for the various plant functional types is key to understanding changes in total ET and partitioning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Reaction of BCl 3 with H- and Cl-terminated Si(100) as a pathway for selective, monolayer doping through wet chemistry

The reaction of boron trichloride with the H and Cl-terminated Si(100) surfaces was investigated to understand the interaction of this molecule with the surface for designing wet-chemistry based silicon surface doping processes using a carbon- and oxygen-free precursor. The process was followed with X-ray photoelectron spectroscopy (XPS). Within the reaction conditions investigated, the reaction is highly effective on Cl-Si(100) for temperatures below 70°C, at which point both surfaces react with BCl$_3$. The XPS investigation followed the formation of a B 1s peak at 193.5 eV corresponding to (B-O)$_x$ species. Even the briefest exposure to ambient conditions lead to hydroxylation of surface borochloride species. However, the Si 2p signature at 102 eV allowed for a confirmation of the formation of a direct Si-B bond. Density functional theory was utilized to supplement the analysis and identify possible major surface species resulting from these reactions. This work provides a new pathway to obtain a functionalized silicon surface with a direct Si-B bond that can potentially be exploited as a means of selective, ultra-shallow, and supersaturated doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Simulation and analysis of slip flow of water at hydrophobic silica surfaces of nanometer slit pores

Water flow in nanopores is controlled fundamentally by pore wettability and interfacial water features. In the research herein reported, Molecular dynamics (MD) was used to simulate water flow in nanometer slit pores of silica surfaces with variable wetting characteristics. Compared to Couette flow, the simulated slit-pores of the talc (001) and octadecyltrichlorosilane (OTS) monolayer surfaces exhibited water flow enhancement and a positive slip length at the interface, whereas water flow velocity at the quartz (001) and amorphous silica surfaces was zero, adhering to the no slip condition. More intensive interactions between the interfacial water and hydrophilic silica surfaces were confirmed by MD simulation and sum-frequency vibrational spectroscopy (SFVS) results. A water exclusion zone of approximately 3 Å was found at the hydrophobic silica surfaces by quantitative MD interfacial water analysis and validated by SFVS. This exclusion zone dimension was similar in magnitude to the slip length (4–5 Å) as determined from simulated water flow in hydrophobic silica slit pores. The simulated slip lengths at the hydrophobic surfaces (0.2–1 nm) were significantly less than the experimental slip lengths (>40 nm) reported in the literature. In the case of the experimental results, this difference appears to be due to nanobubbles expected to be present at hydrophobic surfaces.

42 ENGINEERING↗
DOE OSTI2023

Insights into Waterflooding in Hydrocarbon-Bearing Nanochannels of Varying Cross Sections from Mesoscopic Multiphase Flow Simulations

Waterflooding is one of the geotechnique used to recover fuel sources from nanoporous geological formations. The scientific understanding of the process that involves the multiphase flow of nanoconfined fluids, however, has lagged, mainly due to the complex nanopore geometries and chemical compositions. To enable benchmarked flow of nanoconfined fluids, the architected geomaterials, such as synthesized mesoporous silica with tunable pore shapes and surface chemical properties, are used for designing and conducting experiments and simulations. This work uses a modified many-body dissipative particle dynamics (mDPD) model with accurately calibrated parameters to perform parametric flow simulations for studying the influences of waterflooding driven power, pore shape, surface roughness, and surface wettability on the multiphase flow in heptane-saturated silica nanochannels. Remarkably, up to 80\% reduction in the effective permeability is found for water-driven heptane flow in a baseline 4.5 nm-wide slit channel, when compared with the Hagen–Poiseuille equation. In the 4.5 nm-wide channels with architected surface roughness, the flow rate is found either higher or lower than the baseline case, depending on the shape and size of cross-sections. High wettability of the solid surface to water is essential for achieving high recovery of heptane, regardless of surface roughness. When the solid surface is less wetting or non-wetting to water, the existence of an optimal waterflooding driven power is found to allow for the highest possible recovery. A detailed analysis on the evolution of the transient water-heptane interface in those nanochannels is presented to elucidate the underlying mechanisms that impact or dictate the multiphase flow behaviors.

58 GEOSCIENCES↗
DOE OSTI2022

CO 2 Hydrogenation to Methanol over Inverse ZrO 2 /Cu(111) Catalysts: The Fate of Methoxy under Dry and Wet Conditions

Understanding the surface chemistry of CH 3 O species is essential for the production of methanol by CO 2 hydrogenation over Cu-based heterogeneous catalysts, as it facilitates the rational design of more efficient conversion processes. Recent research has identified inverse ZrO 2 /Cu catalysts as highly active and selective systems for the transformation of CO 2 to methanol with a performance that can be better than that of commercial Cu/ZnO catalysts. Here, we employed synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and calculations based on density functional theory (DFT) to understand the fate of CH 3 O groups under dry and wet environments. AP-XPS spectra revealed that under CO 2 hydrogenation conditions, formate and methoxy are two key intermediates to produce methanol. Furthermore, there are three different types of reactive sites on the surface: One is active for methoxy adsorption, which is stable and responsible for the methanol synthesis; Another one transforms CO 2 into CO; and a third one is active for CO 2 and methoxy dissociation, leading to C and methane formation. The theoretical calculations indicate that CH 3 OH readily dissociates to CH 3 O species following a highly exothermic (ΔE = -20.99 kcal/mol) and barrierless process. The water produced by the reverse water-gas shift reaction (CO 2 + H 2 → H 2 O + CO) can prevent the decomposition of CH 3 O species. We discovered that by introducing a tiny amount of water vapor (2 × 10 -6 Torr) into the reaction chamber, the energy barrier for the reaction CH 3 O(ads) + H(ads) → CH 3 OH(gas) is dramatically reduced. AP-XPS and computational modelling showed that water is quite capable of extracting adsorbed methoxy to form gaseous methanol. With this in mind, one could boost the methanol selectivity by adding appropriate amounts of water or steam, which is an inexpensive and feasible solution for industrial operations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Initial Assessment of 3D-Printed Molybdenum Lattices as a Substrate for Liquid Metal Plasma-Facing Components

Many liquid metal plasma-facing component concepts for fusion reactors require a capillary porous material to wick the liquid metal to the surface of the component. In this work, samples of 3D-printed molybdenum lattices designed to have pore sizes ranging from 100 to 1000 µm were fabricated by two different suppliers. The dimensions of the lattice structures were characterized using an optical microscope, revealing that the lattice walls were almost systematically thicker than they were designed to be and in turn the pores are all smaller than they were designed to be. In many cases the pores were completely clogged. Several spectroscopic techniques were used to characterize the chemical composition of the materials, collectively indicating the presence of a thick layer of oxygen-rich material extending more than 1 µm below the surface. Compression testing revealed significant asymmetry in the mechanical behavior depending on which direction the force was applied relative to the print direction. Lastly, lithium wetting tests of several lattice samples were performed, and a sample with ~250-µm pores was found to soak up lithium quickly after initial wetting of the surface occurred. The implications of these results for future liquid metal plasma-facing component design are discussed.

Parsons, Matthew S. [Princeton Plasma Physics Labo↗
DOE OSTI2024

Experimental investigation into coal wettability changes caused by reactions with scCO 2 -H 2 O

Geological CO 2 sequestration (GCS) can help mitigate global warming and enhance methane recovery from coal beds. However, few studies have linked the effects of CO 2 to surface chemistry changes controlling wetting behavior in deep coal beds. Contact angles (CAs) of CO 2 /N 2 -high volatile bituminous coal-water systems were measured under different temperatures and pressures. The surface chemistry and physical structure of coals were characterized to investigate changes in physicochemical properties and their relations with wettability after reactions. For N 2 treatment, the time-dependence of static and dynamic CAs were insignificant, ranging within 4°. For gaseous CO 2 treatment, the static CAs and the average advancing angles increased slightly. With supercritical (sc) CO 2 , both the static and dynamic CAs increased significantly, and θ adv changed to intermediate-wet (92°). Reactions with minerals exposed to scCO 2 resulted in greater surface roughness and heterogeneity, greater contact angle hysteresis and more surface sites occupied by scCO 2 rather than H 2 O. Increases in hydrophobic functional groups and decreases in hydrophilicity were shown by FTIR spectra, reflecting the shedding of polar oxygen-containing functional groups, reduction of hydrogen bonds, and increasing percentage of hydrocarbons. XRD patterns obtained following scCO 2 -treatment showed that crystallite growth and molecular polymerization were higher toward graphite-like. The calculated structural parameters of functional groups and crystallites both showed elevated coal rank. Changes in crystallite structure, notably higher carbon content and decreased negative surface charge, are unfavorable for water-wetting. Finally, this study contributes to understanding surface chemistry changes responsible for decreased wettability during CO 2 -enhanced coal bed methane recovery and GCS in coal reservoirs.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Role of heterogeneous surface wettability on dynamic immiscible displacement, capillary pressure, and relative permeability in a CO 2 -water-rock system

Numerical examination of CO 2 displacement in brine filled rock pores with varying wettability. Results show that as the CO 2 contact angles on the rock surface increased (intermediate water wetting conditions) negative entry pressures for CO 2 displacement were observed, indicating that when heterogeneous surface wettability is accounted for, greater mobility of CO 2 into rock pores is expected. In addition, simulated relative permeability CO 2 curves with heterogeneous intermediate water wetting conditions exhibited a greater amount of variation, indicative of a complex interrelation of geometric capillary restrictions and surface wettability.

58 GEOSCIENCES↗
DOE OSTI2021

Observational constraints on wet and dry deposition of black carbon to land surfaces (Final Report)

This project focused on providing observational constraints on dry deposition of black carbon and aerosol particles, and the extent to which wet and dry deposition impacts the lifetime of aerosols in the atmosphere. The proposed work tackled the following questions: To what extent dry versus wet deposition controls the removal of BC from the atmosphere, and thus atmospheric BC concentrations? Is BC dry deposition controlled by the same processes as non-refractory aerosol dry deposition? We successfully made eddy covariance flux measurements at the DOE Southern Great Plains site of size-resolved aerosol number fluxes with an ultra high sensitivity aerosol spectrometer (UHSAS) and of black carbon mass and number fluxes using a single particle soot photometer (SP2). We also collected precipitation samples for off-line measurement of rBC using a wet deposition collector. Using these measurements, we identified that wet deposition was the dominant control for black carbon lifetime, but that dry deposition was poorly constrained in models. We developed a new parameterization for particle dry deposition, and applied it to global models to demonstrate the importance of dry deposition in air pollution and radiative effect estimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Cold Seeded Epitaxy and Flexomagnetism in GdAuGe Membranes Exfoliated From Graphene/Ge(111)

Remote and van der Waals epitaxy are promising approaches for synthesizing single crystalline membranes for flexible electronics and discovery of new properties via extreme strain; however, a fundamental challenge is that most materials do not wet the graphene surface. We develop a cold seed approach for synthesizing smooth intermetallic films on graphene that can be exfoliated to form few nanometer thick single crystalline membranes. Our seeded GdAuGe films have narrow X-ray rocking curve widths of 9–24 arc seconds, which is 2 orders of magnitude lower than their counterparts grown by typical high temperature methods, and have atomically sharp interfaces observed by transmission electron microscopy. Upon exfoliation and rippling, strain gradients in GdAuGe membranes induce an antiferromagnetic to ferri/ferromagnetic transition. Finally, our smooth, ultrathin membranes provide a clean platform for discovering new flexomagnetic effects in quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Confinement-induced chirality in phase-separated achiral polymer solutions

Self-organization of polymers in constrained geometries largely determines their applications in high-strength materials, photonics, and electronics. Chiral organization under confinement is well established for polymers with intrinsic molecular chirality; however, it has not been observed for achiral polymers. Here, we report the emergence of chirality in spatially confined solutions of achiral rigid-rod polymers. We show that kinetically arrested phase separation of polymer solutions confined to narrow capillaries resulted in alternating segments of isotropic and chiral nematic phases. The chiral structure of the nematic segments originated from the interplay between the constrained geometry, surface anchoring, orientational wetting, and elastic anisotropy of rigid-rod polymers. The catenoidal shape of the chiral structure recapitulated the morphology of biological chiral structures. These findings provide insight into the organization of soft matter under spatial confinement and offer a straightforward way to form chiral structures from achiral synthetic polymers.

Science & Technology - Other Topics↗
DOE OSTI2021

Self-Assembly and Phase Separation for Transport: A brief argument for the continued exploration of liquid crystal flows and electrodeposition in micro-gravity

Phase separation, interfacial tension gradients, and molecular self-assembly are all phenomena frequently observed when manipulating soft condensed matter systems on Earth. Depending on the system these processes can also be quite predictable. For instance, on Earth water droplets placed on hydrophobic surfaces will have contact angles > 90° with limited spread, contrary to their wetting behavior on hydrophilic surfaces. However, in an environment that is in a constant state of free-fall, where the gravitational field is reduced by 10%, such as on the International Space Station (ISS), buoyancy and its effect on fluid convection also become negligible. Fluid flow and phase behavior become less predictable. Thus, continuing the prior example, even if water droplets still remain in contact with a surface in microgravity (µg), the interface between the air and droplets will still remain significantly curved, appearing almost as if they were placed over completely nonwetting surfaces (Fig. 1a). Moreover, the negligible opposing buoyant force would also mean that if immiscible liquid droplets of a less dense character, or air bubbles even (Fig. 1b), were to be suspended within a larger water drop, these immiscible droplets or air bubbles would not migrate toward any one direction unless either artificially propelled by an external force or internal reaction inducing flow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗