Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Lava flows on Mars - Analysis of small surface features and comparisons with terrestrial analogs

High-resolution images of south and west Arsia Mons, eastern Tharsis, and Memnonia Fossae on Mars are analyzed. Lava flows with different types of features, such as pressure ridges, tumuli, festoon ridges, and ring ridges, are observed. The effects of these small features on the type of eruption, mode of flow emplacement, and characteristics of the terrain over which the lavas flow are examined. The development of terrestrial pressure ridges, festoon, and ring structures is discussed and they are compared to the observed Martian features. The interior viscosity of the features are calculated using the Fink and Fletcher (1978) and Fink (1980a) models; the interior viscosity was estimated as 100 MPa sec in flow margins, ponded areas, and across flow lobes. The data reveal that south of Arsia Mons, flows containing pressure ridges are emplaced as multiple flow units from sporadic low-effusion rate eruptions, and the flows at the other three areas are large sheet flows that represent basaltic flood-type volcanism.

Theilig, E.↗
NASA NTRS1988

SAR imagery of the Grand Banks (Newfoundland) pack ice pack and its relationship to surface features

Synthetic Aperture Radar (SAR) data and aerial photographs were obtained over pack ice off the East Coast of Canada in March 1987 as part of the Labrador Ice Margin Experiment (LIMEX) pilot project. Examination of this data shows that although the pack ice off the Canadian East Coast appears essentially homogeneous to visible light imagery, two clearly defined zones of ice are apparent on C-band SAR imagery. To identify factors that create the zones seen on the radar image, aerial photographs were compared to the SAR imagery. Floe size data from the aerial photographs was compared to digital number values taken from SAR imagery of the same ice. The SAR data of the inner zone acquired three days apart over the melt period was also examined. The studies indicate that the radar response is governed by floe size and meltwater distribution.

Argus, S. D.↗
NASA NTRSDate not supplied

The Aguas Zarcas Breccia - Similarities to Surface Features of Asteroids Ryugu and Bennu

At 21:07 local time on 23rd April 2019, a meteorite fall occurred in Aguas Zarcas, San Carlos County, Alajuela province, Costa Rica. The rapid recovery of this brecciated carbonaceous chondrite after its fall provides an opportunity to investigate a freshly-fallen, relatively uncontaminated and highly-brecciated meteorite for comparison to the samples returned from C-group asteroids by the Hayabusa2 and OSIRIS-REx spacecraft. The study includes several pre-rain fragments. Our X-ray Computed Tomography(XCT) results show many different lithologies. In this study we describe the petrography and mineralogy of five different lithologies of the Aguas Zarcas meteorite. We also present bulk oxygen isotope data of some lithologies and results concerning the organic matter. We describe all the fragments in detail and attempt a classification of each lithology in order to understand the origin and the history of formation of the Aguas Zarcas' parent body. Our results show some lithologies of Aguas Zarcas similar to those in CM chondrites, but others are unique. The different lithologies [1] represent different levels of hydration and heating as well, which are good analogues for the types of materials returned from asteroids Bennu and Ryugu. Spectroscopic observations of the Ryugu and Bennu asteroids compared to laboratory measurements of meteorites suggest that the asteroids show some similarities to heated CM, heated CI or, CI chondrites [2-5]. Both asteroids are regarded to consist of materials altered by aqueous alteration (e.g., [5]) and formed by re-accretion after impact destruction and brecciation (e.g., [6-7]). Considering the various different lithologies in Aguas Zarcas [2] and other CM chondrites [8-9] these types of carbonaceous chondrites may be regarded as good analogues for samples from the Ryugu and Bennu asteroids. The presence of unique and rare lithologies in the Aguas Zarcas, that are distinct from typical CM chondrite lithologies, indicates a complex mixing of various materials in a highly dynamic environment.

Imene Kerraouch↗
NASA NTRSDate not supplied

The Aguas Zarcas Breccia - Similarities to Surface Features of C-Complex Asteroids Ryugu and Bennu

Knowledge of the materials originally present in the proto-solar nebula is one of the most significant constraints for models concerning the formation of our solar system. The physicochemical properties of these original materials can be determined through two distinct and complementary approaches: astronomical observations of nascent stellar systems and the dense clouds from which they originated; and laboratory studies of available astromaterials such as meteorites, interplanetary dust particles, comets, as well as returned mission samples (e.g., from Hayabusa -1 -2;OSIRIS -Rex). Laboratory study of these extraterrestrial materials provides valuable information about the first solids portion of the early solar system and their evolution. Here, we present petrographic and mineralogical characteristics of the polymic beccias Aguas Zarcas based on the research results of [1].On April 23, 2019, at 21:07 local time, a meteorite fall occurred in Aguas Zarcas, San Carlos County, Alajuela province, Costa Rica. The rapid recovery of this brecciated carbonaceous chondrite after its fall provides an opportunity to study a freshly fallen, relatively uncontaminated, and highly brecciated meteorite to compare with samples returned by theHayabusa2 and OSIRIS-REx spacecraft from C-group asteroids. The study includes several pre-rain fragments [1].The X-ray Computed Tomography (XCT) results show many different lithologies. We describe the petrography and mineralogy of five different lithologies of the Aguas Zarcas meteorite. We also present data on bulk oxygen isotopes. We describe all fragments in detail and attempt to classify each lithology in order to understand the origin and formation history of the Aguas Zarcas parent body. Our results show that some lithologies of Aguas Zarcas are similar to those in CM chondrites, but others are unique. The different lithologies [1] also represent different degrees of hydration and heating, which are good analogues for the types of materials returned by the Bennu and Ryugu asteroids. Spectroscopic observations of the Ryugu and Bennu asteroids compared to laboratory measurements of meteorites suggest that the asteroids have some similarities to heated CM, heated CI, or CI chondrites[2-5]. Both asteroids are thought to be composed of materials altered by aqueous alteration (e.g., [5]) and formed by reaccretion after destruction by impacts and brecciation (e.g., [6-7]). Considering the different lithologies in Aguas Zarcas [2] and other CM chondrites [8-9], these types of carbonaceous chondrites can be considered good analogues for samples from the Ryugu and Bennu asteroids. The presence of unique and rare lithologies in the Aguas Zarcas, different from the typical CM chondrite lithologies, suggests complex mixing of different materials in a highly dynamic environment.

Imene Kerraouch↗
NASA NTRS1971

History of Martian volatiles - Implications for organic synthesis.

A theoretical reconstruction of the history of Martian volatiles indicates that Mars probably possessed a substantial reducing atmosphere at the outset of its history, and that its present tenuous and more oxidized atmosphere is the result of extensive chemical evolution. As a consequence, it is probable that Martian atmospheric chemical conditions, now hostile with respect to abiotic organic synthesis in the gas phase, were initially favorable. Evidence indicating the chronology and degradational history of Martian surface features, surface mineralogy, bulk volatile content, internal mass distribution, and thermal history suggests that Mars catastrophically developed a substantial reducing atmosphere as the result of rapid accretion.

Fanale, F. P.↗
NASA NTRS2004

Effect of Surface Treatments on Electron Beam Freeform Fabricated Aluminum Structures

Electron beam freeform fabrication (EBF3) parts exhibit a ridged surface finish typical of many layer-additive processes. This, post-processing is required to produce a net shape with a smooth surface finish. High speed milling wire electrical discharge machining (EDM), electron beam glazing, and glass bead blasting were performed on EBF3-build 2219 aluminum alloy parts to reduce or eliminate the ridged surface features. Surface roughness, surface residual stress state, and microstructural characteristics were examined for each of the different surface treatment to assess the quality and effect of the surface treatments on the underlying material. The analysis evaluated the effectivenes of the different surface finishing techniques for achieving a smooth surface finish on an electron beam freeform fabricated part.

Taminger, Karen M. B.↗
NASA NTRS2010

Surface-Enhanced X-Ray Fluorescence

Surface-enhanced x-ray fluorescence (SEn-XRF) spectroscopy is a form of surface- enhanced spectroscopy that was conceived as a means of obtaining greater sensitivity in x-ray fluorescence (XRF) spectroscopy. As such, SEn-XRF spectroscopy joins the ranks of such other, longer-wavelength surface-enhanced spectroscopies as those based on surface-enhanced Raman scattering (SERS), surface-enhanced resonance Raman scattering (SERRS), and surfaceenhanced infrared Raman absorption (SEIRA), which have been described in previous NASA Tech Briefs articles. XRF spectroscopy has been used in analytical chemistry for determining the elemental compositions of small samples. XRF spectroscopy is rapid and quantitative and has been applied to a variety of metal and mineralogical samples. The main drawback of XRF spectroscopy as practiced heretofore is that sensitivity has not been as high as required for some applications. In SEn-XRF as in the other surface-enhanced spectroscopies, one exploits several interacting near-field phenomena, occurring on nanotextured surfaces, that give rise to local concentrations of incident far-field illumination. In this case, the far-field illumination comes from an x-ray source. Depending on the chemical composition and the geometry of a given nanotextured surface, these phenomena could include the lightning-rod effect (concentration of electric fields at the sharpest points on needlelike surface features), surface plasmon resonances, and grazing incidence geometric effects. In the far field, the observable effect of these phenomena is an increase in the intensity of the spectrum of interest - in this case, the x-ray fluorescence spectrum of chemical elements of interest that may be present within a surface layer at distances no more than a few nanometers from the surface.

Anderson, Mark↗
DOE OSTI2025

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel Jana Howard1,3, Guang Yang3, Haiyan Zhao1*, Patrick Warren4, Tiankai Yao3, Steven Cavazos4 Elizabeth Sooby Wood4*, Ching-heng Shiau2 1 University of Idaho, Environmental Science, Idaho Falls, Idaho, USA 2 Boise State University, Microscopy and Characterization Suite, Idaho Falls, Idaho, USA 3 Idaho National Laboratory, Idaho Falls, Idaho, USA 4 University of Texas San Antonio, Department of Physics and Astronomy, San Antonio, Texas, USA *Corresponding author: haiyanz@uidaho.edu; elizabeth.soobywood@utsa.edu Tri-structural Isotropic (TRISO) particle fuel is the preferred choice for the newest and next-generation high-temperature nuclear reactors due to its robust construction [1]. The fuel design effectively contains fission products inside the particle at extremely high temperatures [2]. However, the effect of transition metal fission products on fuel performance and structural integrity remains largely unknown, creating uncertainties in predicting fuel performance and potential failure mechanisms [2]. For example, palladium (Pd) has a strong tendency to form intermetallic phases with uranium (U). These new phases tend to be hard and brittle which could lead to fracture of fuel kernel during irradiation [3,4]. Pd is not normally produced in high concentrations in normal fission reactions however, driving the production of Pd into the locality of a Uranium Oxycarbide (UCO) nuclear fuel provides an opportunity to closely observe the diffusion and chemical interactions. This study focuses on detailed transmission electron microscopy characterization of the intermetallic phases formed by the interaction between a UCO kernel and a Pd bar after annealing at 1100 °C for 100 hours. Figure 1 provides an overview of the UCO kernel in contact with the Pd bar. The UCO-Pd sample surface was examined using a Focused Ion Beam (FIB) Quanta 3D FEG FEI in VCD detector mode at 10kV, 83pA to reveal surface features. Several key surface features in the interaction region were observed including: (1) a small area with dendritic microstructure, (2) color contrast near the UCO kernel and Pd boundary, and (3) darker and lighter regions throughout the sample surface. To analyze diffusion behavior, FIB was used to prepare lamellae from five different areas of the UCO-Pd sample, as well as one for the as-received sample. These lamellae were examined using a Scanning Transmission Electron Microscope ThermoFisher Spectra 300 (STEM-Spectra). Energy Dispersive Spectroscopy results confirmed the diffusion between the UCO fuel and Pd bar. Figure 2 shows the identified phases of UC, UO2, and Pd dispersed throughout the interaction region. It was also found that the Pd concentration decreases as the radial distance from the UCO-Pd interface increases. The Pd concentration was 36.93% atomic fraction 11µm from the interaction region then decreased to 7.51% atomic fraction at 257 µm away from the interaction region. Figure 3 shows how concentrations of U and Pd vary across the interaction zone, highlighting the extent of diffusion. This study confirms that Pd interacts with surrounding material to form U-Pd phase and diffusion zones. These diffusion zones vary in composition depending on its radial distance from the point of contact with the Pd bar. These findings contribute to a deeper understanding of the fission product behavior in high temperature nuclear fuels, aiding in the prediction and mitigation of potential fuel degradation mechanisms. A B C Fig. 1. SEM micrographs of UCO fuel kernel in contact with solid Pd bar and the lift out locations. Figure 1A shows UCO fuel kernel in contact with solid Pd bar. Figure 1B shows a higher magnification image of the UCO fuel-Pd interaction zone. Figure 1C shows lift out sites for the lamellae. A B C Fig 2. EDS maps reveal the distribution of U, O, and Pd in location 3. Figure 2A shows the distribution of uranium. Figure 2B shows the distribution of oxygen. Figure 2C shows the distribution of palladium. A B C Fig 3. Palladium and uranium concentration across interaction zone in location 2. Figure 3A shows EDS map of lift out number 2. Figure 3B shows a zoomed in EDS map taken from the interaction zone. Figure 3C shows a line graph of uranium and palladium concentrations across the interaction zone. References: 1. B.E. Wells, N.R. Phillips, K.J. Geelhood. Pacific West Laboratory. (2021). TRISO Fuel: Properties and Failure Modes. https://www.nrc.gov/docs/ML2117/ML21175A152.pdf (Accessed January 16, 2025). 2. American Nuclear Society. TRISO Fuel Development Progresses in INL, ORNL. https://www.gen-4.org/gif/upload/docs/application/pdf/2014-03/nov13nn_fuel_reprint.pdf (Accessed January 16, 2025) 3. Clark R.A., M.A. Con

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel Jana Howard1,3, Guang Yang3, Haiyan Zhao1*, Patrick Warren4, Tiankai Yao3, Steven Cavazos4 Elizabeth Sooby Wood4*, Ching-heng Shiau2 1 University of Idaho, Environmental Science, Idaho Falls, Idaho, USA 2 Boise State University, Microscopy and Characterization Suite, Idaho Falls, Idaho, USA 3 Idaho National Laboratory, Idaho Falls, Idaho, USA 4 University of Texas San Antonio, Department of Physics and Astronomy, San Antonio, Texas, USA *Corresponding author: haiyanz@uidaho.edu; elizabeth.soobywood@utsa.edu Tri-structural Isotropic (TRISO) particle fuel is the preferred choice for the newest and next-generation high-temperature nuclear reactors due to its robust construction [1]. The fuel design effectively contains fission products inside the particle at extremely high temperatures [2]. However, the effect of transition metal fission products on fuel performance and structural integrity remains largely unknown, creating uncertainties in predicting fuel performance and potential failure mechanisms [2]. For example, palladium (Pd) has a strong tendency to form intermetallic phases with uranium (U). These new phases tend to be hard and brittle which could lead to fracture of fuel kernel during irradiation [3,4]. Pd is not normally produced in high concentrations in normal fission reactions however, driving the production of Pd into the locality of a Uranium Oxycarbide (UCO) nuclear fuel provides an opportunity to closely observe the diffusion and chemical interactions. This study focuses on detailed transmission electron microscopy characterization of the intermetallic phases formed by the interaction between a UCO kernel and a Pd bar after annealing at 1100 °C for 100 hours. Figure 1 provides an overview of the UCO kernel in contact with the Pd bar. The UCO-Pd sample surface was examined using a Focused Ion Beam (FIB) Quanta 3D FEG FEI in VCD detector mode at 10kV, 83pA to reveal surface features. Several key surface features in the interaction region were observed including: (1) a small area with dendritic microstructure, (2) color contrast near the UCO kernel and Pd boundary, and (3) darker and lighter regions throughout the sample surface. To analyze diffusion behavior, FIB was used to prepare lamellae from five different areas of the UCO-Pd sample, as well as one for the as-received sample. These lamellae were examined using a Scanning Transmission Electron Microscope ThermoFisher Spectra 300 (STEM-Spectra). Energy Dispersive Spectroscopy results confirmed the diffusion between the UCO fuel and Pd bar. Figure 2 shows the identified phases of UC, UO2, and Pd dispersed throughout the interaction region. It was also found that the Pd concentration decreases as the radial distance from the UCO-Pd interface increases. The Pd concentration was 36.93% atomic fraction 11µm from the interaction region then decreased to 7.51% atomic fraction at 257 µm away from the interaction region. Figure 3 shows how concentrations of U and Pd vary across the interaction zone, highlighting the extent of diffusion. This study confirms that Pd interacts with surrounding material to form U-Pd phase and diffusion zones. These diffusion zones vary in composition depending on its radial distance from the point of contact with the Pd bar. These findings contribute to a deeper understanding of the fission product behavior in high temperature nuclear fuels, aiding in the prediction and mitigation of potential fuel degradation mechanisms. A B C Fig. 1. SEM micrographs of UCO fuel kernel in contact with solid Pd bar and the lift out locations. Figure 1A shows UCO fuel kernel in contact with solid Pd bar. Figure 1B shows a higher magnification image of the UCO fuel-Pd interaction zone. Figure 1C shows lift out sites for the lamellae. A B C Fig 2. EDS maps reveal the distribution of U, O, and Pd in location 3. Figure 2A shows the distribution of uranium. Figure 2B shows the distribution of oxygen. Figure 2C shows the distribution of palladium. A B C Fig 3. Palladium and uranium concentration across interaction zone in location 2. Figure 3A shows EDS map of lift out number 2. Figure 3B shows a zoomed in EDS map taken from the interaction zone. Figure 3C shows a line graph of uranium and palladium concentrations across the interaction zone. References: 1. B.E. Wells, N.R. Phillips, K.J. Geelhood. Pacific West Laboratory. (2021). TRISO Fuel: Properties and Failure Modes. https://www.nrc.gov/docs/ML2117/ML21175A152.pdf (Accessed January 16, 2025). 2. American Nuclear Society. TRISO Fuel Development Progresses in INL, ORNL. https://www.gen-4.org/gif/upload/docs/application/pdf/2014-03/nov13nn_fuel_reprint.pdf (Accessed January 16, 2025) 3. Clark R.A., M.A. Con

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Observation of tantalum deposition and growth on TiB2 and ZrB2 from PISCES-RF deuterium and helium plasma exposures

Deuterium and helium plasma exposures on bulk TiB2 and ZrB2 samples were performed using the PISCES-RF linear plasma device. 40 and 90 eV deuterium ion plasma exposures were performed at 240 and 800 °C sample temperatures, and 80 eV helium ion plasma exposures were performed at 800 °C sample temperatures. Following plasma exposures, it was discovered that two plasma conditions (90 eV deuterium and 80 eV helium at 800 °C) resulted in thick (>200 nm) tantalum-rich (>10 at%) surface features on the targets, presumably from tantalum sourced from a tantalum adapter mask or cap used as part of the target holder. This work aims to characterize these tantalum-rich features and examine the mechanisms of impurity deposition.Plasma-induced surface morphology of the tantalum-rich surface layers depends on plasma properties and target temperature and chemistry. Greater titanium sputtering compared to zirconium resulted in more distinct surface features in the TiB2 samples compared to the ZrB2 samples via increased, prompt deposition onto tantalum surface impurities. There is still uncertainty as to why thick tantalum deposition only occurred under some plasma exposure conditions but not others; it is likely due to tantalum sputtering by a combination of boron molecules from the targets and carbon-impurities in the tantalum mask or targets. Impurity driven surface features are a well-documented phenomena in samples exposed to plasma from linear plasma device facilities—this work confirms the occurrence of this and emphasizes the need for chemistry characterization of isolated post-mortem surface features in plasma-exposed samples.

Nuckols, Lauren↗
NASA NTRS1992

Effects of space environment on structural materials

A preliminary study of materials exposed in space in a low Earth orbit for nearly six years has revealed a wide range of micrometeorite or microparticle impact craters ranging in size from 1 to 1000 micron in diameter, debris particles from adjacent and distant materials systems, reaction products, and other growth features on the specimen surfaces, and related phenomena. The exposed surface features included fine grained and nearly amorphous materials as well as a large array of single crystal particles. A replication type, lift off technique was developed to remove reaction products and debris from the specimen surfaces in order to isolate them from the background substrate without creating microchemical or microstructural artifacts or alterations. This resulted in surface features resting on a carbon support film which was virtually invisible to observation by electron microscopy and nondispersive x ray analysis. Some evidence for blisters on leading edge aluminum alloy surfaces and a high surface region concentration of oxygen determined by Auger electron spectrometry suggests oxygen effects where fluences exceed 10(exp 21) atoms/sq cm.

Miglionico, C.↗
NASA NTRS1976

Estimated grain saltation in a Martian atmosphere

Mariner 9 spacecraft images showing evidence of variable surface features and surface erosion resulting from atmospheric wind on Mars have caused a renewed interest in the eolian mechanics of saltating grains. To study this phenomenon, both experimental investigation in an atmospheric wind tunnel and numerical solutions of the equations of motion of a single grain under Martian surface conditions were conducted. The numerical solutions for earth were used and empirically adjusted to correlate with existing experimental data for Mars. These modified equations were then solved to estimate grain motion for Mars. These calculations show the importance of a lifting force on the grain to initiate motion in both earth and Mars calculations. Major findings include a comparison of earth and Mars grain trajectories that show Mars length scales to be longer and to fall with a higher terminal grain velocity. The grains in the Mars calculation also made a smaller collision angle with the surface on rebound.

White, B. R.↗
NASA NTRS1978

Broad perspectives in radar for ocean measurements

The various active radar implementation options available for the measurement functions of interest for the SEASAT follow-on missions were evaluated. These functions include surface feature imaging, surface pressure and vertical profile, atmospheric sounding, surface backscatter and wind speed determination, surface current location, wavelength spectra, sea surface topography, and ice/snow thickness. Some concepts for the Synthetic Aperture Imaging Radar were examined that may be useful in the design and selection of the implementation options for these missions. The applicability of these instruments for the VOIR mission was also kept under consideration.

Jain, A.↗