Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “superstructures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

An Investigation of Oxides of Tantalum Produced by Pulsed Laser Ablation and Continuous Wave Laser Heating

Recent progress has seen multiple Ta 2 O 5 polymorphs generated by different synthesis techniques. However, discrepancies arise when these polymorphs are produced in widely varying thermodynamic conditions and characterized using different techniques. This work aimed to characterize and compare Ta 2 O 5 particles formed at high and low temperatures using nanosecond pulsed laser ablation (PLA) and continuous wave (CW) laser heating of a local area of tantalum in either air or an 18 O 2 atmosphere. Scanning electron microscopy (SEM) and Raman spectroscopy of the micrometer-sized particles generated by PLA were consistent with either a localized amorphous Ta 2 O 5 phase or a similar, but not identical, crystalline β-Ta 2 O 5 phase. The Raman spectrum of the material formed at the point of CW laser impingement was in good agreement with the previously established ceramic “H-Ta 2 O 5 ” phase. TEM and electron diffraction analysis of these particles indicated the phase structure matched an oxygen-vacated superstructure of monoclinic H-Ta 2 O 5 . Further from the point of laser impingement, CW heating produced particles with a Raman spectrum that matched β-Ta 2 O 5 . We confirmed that the high-temperature ceramic phase characterized in previous work by Raman spectroscopy was the same monoclinic phase characterized in different work by TEM and could be produced by direct laser heating of metal in air.

36 MATERIALS SCIENCE↗
NASA NTRS1968

Marine climatic guide

Marine climatic guide for NASA landing and recovery activities - meteorological charts depicting air and sea surface temperature, visibility, winds, and superstructure icing

Source record↗
NASA NTRS1973

Velocity control propulsion subsystem of the Radio Astronomy Explorer satellite for Goddard Space Flight Center

The Velocity Control Propulsion Subsystem (VCPS) was designed the propulsion required for trajectory and lunar orbit corrections of the spacecraft. A GFE clamp assembly physically attaches the VCPS to the spacecraft and the unit is ejected after completing the required corrections. The VCPS is physically and functionally separated from the spacecraft except for the electrical and telemetry interfaces. A GFE transtage provides the superstructure on which the VCPS is assembled. The subsystem consists of two 5 foot pound rocket engine assemblies, 4 propellant tanks, 2 latching valves, 2 fill and drain valves, a system filter, pressure transducer, gas and propellant manifolds and electrical heaters and thermostats. The RAE-B VCPS program covered the design, manufacture and qualification of one subsystem. This subsystem was to be manufactured, subjected to qualification tests; and refurbished, if necessary, prior to flight. The VCPS design and test program precluded the need for refurbishing the subsystem and the unit was delivered to GSFC at the conclusion of the program.

Braught, W.↗
NASA NTRS1975

Spurious signals generated by electron tunneling on large reflector antennas

Large reflector antennas are currently fabricated by assembling a large number of small light aluminum panels onto a superstructure. A large number of aluminum-to-aluminum joints are inherently exposed to RF radiation on such an antenna. It is shown in this paper that the natural oxide layer on aluminum is of the correct thickness to permit electron tunneling through the Al-Al2O3-Al junctions. The nonlinearity due to the junctions then generates spurious signals when these antennas are used for simultaneous transmission and reception of signals at different frequencies. Moreover, the large number of junctions (rivets) on an antenna can combine to produce serious interference in these diplexed systems.

Higa, W. H.↗
NASA NTRS1977

A summary of ship deck motion dynamics as applied to VSTOL aircraft

Ship deck motions are considered in terms of the landing/takeoff of V/STOL aircraft from small ships. Fluctuations in the air turbulence shed by the ship's superstructures, wind direction and velocity, and wind turbulence loads on the aircraft are among the factors discussed. Roll stabilization using antiroll tanks, fins, and rudders is covered.

Baitis, A. E.↗
NASA NTRS1978

Influence of wind turbine foundation

The 200 kW Mod-0A wind turbine was modeled using a 3 lumped mass-spring system for the superstructure and a rotational spring for the foundation and supporting soil. Natural frequencies were calculated using soil elastic moduli varying from 3000 to 22,400 p.s.i. The reduction in natural frequencies from the rigid foundation case ranged up to 20 percent.

Yee, S. T.↗
NASA NTRS1977

Prediction and identification of some transitions associated with 2p/k/ and 2p/k-1/3l configurations in six-, seven- and eight-electron ions

Calculations of fine structure and transition probabilities, using the superstructure program developed at University College London, have been carried out for the 2p(k) and 2p(k-1)3l configurations of ions with six, seven, or eight electrons. The predicted line patterns are compared with existing observations for silicon, sulfur, argon, and calcium to yield some new identifications in laboratory and solar spectra and to indicate some transitions, as yet unobserved, that may be of observational importance.

Kastner, S. O.↗
NASA NTRS1980

Development of simplified process for environmentally resistant cells

This report describes a program to develop a simple, foolproof, all vacuum solar cell manufacturing process which can be completely automated and which results in medium efficiency cells which are inherently environmentally resistant. All components of the completed cells are integrated into a monolithic structure with no material interfaces. The exposed materials (SI, Al2O3, Al, Ni) are all resistant to atmospheric attack and the junction, per se, is passivated to prevent long term degradation. Such cells are intended to be incorporated into a simple module consisting basically of a press formed metallic superstructure with a separated glass cover for missile, etc., protection.

King, W. J.↗
NASA NTRS1984

The INPE handouts to the 6th LANDSAT Technical Working Group (LTWG) Meeting

LANDSAT receiving and processing system in its present configuration and status are described, as well as the experience already obtained with LANDSATs 4 and 5. The revised table of station plans for TM reception and products and of implementation schedule for data formats employing superstructure conventions is updated. Standardization of the worldwide reference systems is proposed. The INPE preliminary TM products price list is included. A TM image received and processed is shown to illustrate the appearance of the products offered.

Debarrosaguirre, J. L.↗
NASA NTRS1986

Soil/Structure Interactions in Earthquakes

In effort to improve design of Earthquake-resistant structures, mathematical study undertaken to simulate interactions among soil, foundation, and superstructure during various kinds of vibrational excitation. System modeled as three lumped masses connected vertically by springs, with lowest mass connected to horizontal vibrator (representing ground) through springs and dashpot. Behavior of springs described by elastic or elastoplastic force/deformation relationships. Relationships used to approximate nonlinear system behavior and soil/foundation-interface behavior.

Ramey, G. W.↗
NASA NTRS1985

Structure variation of the index of refraction of GaAs-AlAs superlattices and multiple quantum wells

A detailed calculation of the index refraction of various GaAs-AlAs superlattices is presented for the first time. The calculation is performed by using a hybrid approach which combines the k-p method with the pseudopotential technique. Appropriate quantization conditions account for the influence of the superstructures on the electronic properties of the systems. The results of the model are in very good agreement with the experimental data. In comparison with the index of refraction of the corresponding AlGaAs alloy, characterized by the same average mole fraction of Al, the results indicate that the superlattice index of refraction values attain maxima at the various quantized transition energies. For certain structures the difference can be as large as 2 percent. These results suggest that the waveguiding and dispersion relation properties of optoelectronic devices can be tailored to design for specific optical application by an appropriate choice of the superlattice structure parameters.

Kahen, K. B.↗
NASA NTRS1985

Superlattices and multilayer structures for high efficiency solar cells

Possible applications of superlattices to photovoltaic structures are discussed. A new concept based on doping superstructures (NIPI) can be exploited to significantly reduce recombination losses in III-V compound solar cells. A novel multijunction structure with lateral current transport is proposed. A computer simulation has been performed which shows that by optimizing the multilayer structure, short circuit current is substantially increased with minimum drop in open circuit voltage. An additional advantage of the structure is enhanced radiation tolerance. It is anticipated that this multilayer structure can be incorporated in multibandgap cells to achieve high efficiencies.

Wagner, M.↗
NASA NTRS1986

Superlattices and NiPi structures in new forms of cascade solar cells

The activity in the field of photovoltaic semiconductor superstructures is described. Progress was accomplished in the two principal directions previously defined in our initial proposal, i.e.: (1) Theoretical investigation of the optical properties of superlattices; and (2) New solar cell concepts and device modeling. Although important information concerning the optical constants of superlattices and multiple quantum well structures was obtained from our computer model, most of the theoretical efforts have progressively shifted from the former to the latter aspect of the project because of the discovery of a new kind of photovoltaic device which may exhibit improved performances with respect to conventional solar cells.

Leburton, J. P.↗
NASA NTRS1985

Design of static reaction gantry for an ultralight airplane destruction test

The steel gantry superstructure needed to perform an airplane static test is described. Standard civil engineering design practices are used to react the loads generated by an airplane in flight. Reaction columns are mounted on a structural floor to carry the wing airloads and the downward acting fuselage loads are carried directly into the floor. The gantry can accommodate a general aviation airplane or rotorcraft. An immediate use for an ultralight airplane is shown as an example configuration of the four main steel frames.

Smith, H. W.↗
NASA NTRS1987

A structural analysis of an ocean going patrol boat subjected to planning loads

A static structural analysis of an ocean going patrol vessel subjected to hydrodynamic planning loads is discussed. The analysis required the development of a detailed model that included hull plating, five structural bulkheads, longitudinal and transverse stiffners, and a coarse representation of the superstructure. The finite element model was developed from fabrication drawings using the Navy computer aided design system. Various stress and displacement contours are shown for the entire hull. Because several critical areas appeared to be overstressed, these areas were remeshed for detail and are presented for completeness.

Clark, James H.↗
NASA NTRS1987

Index of refraction of GaAs-Al(x)Ga(1-x)As superlattices and multiple quantum wells

A theoretical study of the index of refraction of superlattices and its variation as a function of frequency and the superlattice parameters, i.e., layer width and AlAs composition, is presented. Gamma-region exciton and valence-band mixing effects are included in the model. It is found that these two effects have an important influence on the value of the index of refraction and that superstructure effects rapidly decrease for energies greater than the superlattice potential barriers. Because of the quasi-two-dimensional character of the Gamma-region excitons, the results indicate that the superlattice index of refraction can vary by about two percent at the quantized, bound-exciton, transition energies. Overall, the theoretical results are in good agreement with the experimental data.

Kahen, K. B.↗
NASA NTRS1988

Superconductivity in the high-Tc Bi-Ca-Sr-Cu-O system - Phase identification

Four phases are observed in superconducting Bi-Ca-Sr-Cu-O samples. The superconducting phase, with onset temperature near 120 K, is a 15.4-A-layered compound with composition near Bi2Ca1Sr2Cu2O9 and an A-centered orthorhombic unit subcell 5.41 x 5.44 x 30.78 A. X-ray diffraction and electron microscopy data are consistent with a structure of alternating perovskite and Bi2O2 layers. High-resolution transmission electron microscopy images reveal a b-axis superstructure of 27.2 A, numerous (001) stacking faults, and other defects.

Hazen, R. M.↗