Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “subsurface system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

On an Extensive Late Hydrologic Event in Gale Crater as Indicated by Water‐Rich Fracture Halos

Abstract We analyze spatially pervasive, light‐toned “halos” associated with fractures in a sedimentary unit (Stimson) of Gale crater, Mars, and report a similar network of halos discovered in a separate geologic group (Bradbury). Through a dedicated active neutron measurement campaign, we provide independent confirmation of the water‐rich nature of these features. Together with mineralogical and geochemical data, these features are consistent with abundant hydrated amorphous silica (opal‐A). We suggest that the mineral and amorphous assemblages are indicative of formation under low‐temperature and predominantly low‐pH conditions (passive silica enrichment) with minor contribution of silica (active silica enrichment) from adjacent units. We show that there is significant amorphous silica in the array of sedimentary rocks in Gale crater, allowing them to play a role in an active silica enrichment phase of halo formation. We suggest that the involved alteration event was short lived and our finding of vast halo networks in a distant, older unit implies a more vast network of hydrologic subsurface conduits than previously known. This relatively recent subsurface hydrologic system was present long after the transition from a warm and wet to a cold and dry Martian environment, extending the habitability conditions on Mars to an epoch that is generally considered not favorable for life on the surface. Finally, our bulk H quantification of these features, which ranges from ∼3–6 wt% H 2 O‐equivalent‐H, suggests that the amorphous material in halos hosts ample supplies of readily released water, making them a considerable resource at the otherwise dry Martian equator.

Gabriel, Travis S. J.↗

Low hydrogen solubility in clay interlayers limits gas loss in hydrogen geological storage

Gas intercalation into clay interlayers may result in hydrogen loss in the geological storage of hydrogen; a phenomenon that has not been fully understood and quantified. Here we use metadynamics molecular simulations to calculate the free energy landscape of H 2 intercalation into montmorillonite interlayers and the H 2 solubility in the confined water; in comparison with results obtained for CO 2 . Furthermore, the results indicate that H 2 intercalation into hydrated interlayers is thermodynamically unfavorable while CO 2 intercalation can be favorable. H 2 solubility in hydrated clay interlayers is in the same order of magnitude as that in bulk water and therefore no over-solubility effect due to nanoconfinement is observed – in striking contrast with CO 2 . These results indicate that H 2 loss and leakage through hydrated interlayers due to intercalation in a subsurface storage system, if any, is limited.

58 GEOSCIENCES↗

Hydrologic response of artificially drained agricultural watersheds: insights from high-resolution integrated surface/subsurface simulations

Artificial drainage systems comprising subsurface networks of perforated pipes (tile drains) and engineered surface ditches are widely used to remove excess water from poorly drained agricultural regions. Artificial drainage lowers the water table by design but also has inadvertent effects on the watershed-scale hydrologic response with important implications for flood risk and nutrient exports. We investigated the effects of tile drains on watershed-scale hydrologic response in the Portage River, OH, Watershed using a high-resolution physically based integrated surface/subsurface hydrology model with recently developed capabilities to represent artificial drainage. Tile drains were found to enhance streamflow during times of low flow, generally consistent with previous studies. Streamflow flashiness was found to have a non-monotonic dependence on tile spacing with a minimum at intermediate spacings (∼50 m). Flashiness and the event hydrographs for small tile spacing were similar to the situation with no tiles, but flow paths from farm to stream were very different for those two end member cases, emphasizing the limitations of the stream hydrograph in characterizing hydrologic response. For typical tile spacings, peak flow can either be enhanced or attenuated by the presence of tiles, depending on the size of the event and the antecedent meteorological conditions. Tiles enhance peak flow when the event is below a threshold of ∼25 mm or when events arrive in dry conditions. Peak flow is reduced by tiles when events are large and arrive in conditions that are not overly dry. The dependence on event size and antecedent conditions is explained by differences in available storage and flow paths to the streams. These results provide additional insights into how tile drainage modulates event-scale hydrologic response, an important control on flood generation mechanisms and nutrient exports.

agricultural watershed↗

Wetland Soil Characterization and Methane Production Impacted by Nickel Addition, Argonne and Tims Branch Wetlands, September and October 2020

Abstract:Freshwater wetland soils are foci of biogeochemical cycling as they serve as key sources of methane to the atmosphere. An array of metalloenzymes is essential to anaerobic microbial carbon transformations. Nickel is notably recognized as playing key roles in the enzymatic pathways of methanogenesis. Low availability of trace metals limits microbial element cycling in laboratory studies, but the occurrence of such limitations in natural subsurface aquatic systems is poorly understood. Microcosm incubation studies were carried out using two distinct wetland soils, one from a marsh wetland and the second from a riparian wetland, to explore the effect of dissolved Ni concentrations on methane production. Data are provided for wetland soil characterization and soil incubation experiments using materials from marsh wetlands at Argonne National Laboratory and riparian wetlands in the Tims Branch watershed at Savannah River National Laboratory. The characterization data consists soil carbon, nitrogen, sulfur, and iron contents plus as well as the solid-phase concentrations of copper, nickel, cobalt, and zinc, bioessential trace metals that may limits microbial metabolic process if they have low availability. The data for the soil incubation experiments include fluid pH, fluid dissolved trace metal concentrations, and cumulative methane production. Three soil incubations are reported: marsh wetland soil with increasing nickel addition, marsh wetland soil in sulfate-free water with increasing nickel addition, and riparian wetland soil with increasing nickel addition. All data are provided in text-based CSV format with header sections indicating the data contained in each file and the corresponding units. Note that "u" is used in place of Greek lower case mu to indicate the micro prefix on units. A Table of Contents file (Yan_Soil_Incubations_2020_TOC.txt) provides an index for the data contained in the individual files.

54 ENVIRONMENTAL SCIENCES↗

Pore-Scale Study on the Positive Feedback Between Stress and Porosity Caused by Pressure Solution in Porous Media

Pressure solution is an important process in the evolution of sedimentary rocks, which provide storage space for most of our petroleum resources. It directly influences the generation, migration, and storage of petroleum fluids in subsurface sedimentary rocks. Here, in this paper, we develop a pore-scale, mechanochemical model to demonstrate a possible positive feedback between the local porosity and pore surface stress, in which a higher local porosity causes a higher local pore surface stress, thus enhancing pressure solution and consequently further increasing the local porosity. Pore surface stress represents stress on a solid grain adjacent to a pore. Specifically, the pore-scale, mechanochemical model directly simulates the stress distribution over solid and pore surfaces using a finite element model. The dissolution of solids at the solid-pore interfaces under a far-from-equilibrium condition is simulated using a first-order kinetics model that accounts for the local stress distribution. The updated pore geometry, caused by pore surface dissolution, is then used in the stress simulation in the next numerical iteration. Two types of porous media, the Oriskany sandstone and an artificial porous medium with spherical pores, were tested in the mechanochemical simulation. The positive stress-porosity feedback during pressure solution was observed in both samples. In addition, the model quantitatively illustrated the distribution of local mineral dissolution rates on all pore surfaces, as well as its relation to the effective mineral dissolution rate of the entire sample. Based on the comparison between the two porous media, the local mineral dissolution was regulated by pore space distribution, geometry, and coalescence during pressure solution. This work is the first that uses direct, pore-scale numerical simulation to demonstrate the positive stress-porosity feedback during pressure solution, which has the potential to advance the understanding of the mechanical-chemical (MC) coupling in many geological processes that are relevant to subsurface energy systems, such as the recovery of petroleum hydrocarbons and geothermal energy.

CT scanning↗

X-ray diffraction reveals two structural transitions in szomolnokite

Hydrated sulfates have been identified and studied in a wide variety of environments on Earth, Mars, and the icy satellites of the solar system. The subsurface presence of hydrous sulfur-bearing phases to any extent necessitates a better understanding of their thermodynamic and elastic properties at pressure. End-member experimental and computational data are lacking and are needed to accurately model hydrous, sulfur-bearing planetary interiors. In this work, high-pressure X-ray diffraction (XRD) and synchrotron Fourier-transform infrared (FTIR) measurements were conducted on szomolnokite (FeSO 4 ·H 2 O) up to ~83 and 24 GPa, respectively. This study finds a monoclinic-triclinic (C2/c to P1¯) structural phase transition occurring in szomolnokite between 5.0(1) and 6.6(1) GPa and a previously unknown triclinic-monoclinic (P1¯ to P2 1 ) structural transition occurring between 12.7(3) and 16.8(3) GPa. The high-pressure transition was identified by the appearance of distinct reflections in the XRD patterns that cannot be attributed to a second phase related to the dissociation of the P1¯ phase, and it is further characterized by increased H 2 O bonding within the structure. We fit third-order Birch-Murnaghan equations of state for each of the three phases identified in our data and refit published data to compare the elastic parameters of szomolnokite, kieserite (MgSO 4 ·H 2 O), and blödite (Na 2 Mg(SO 4 ) 2 ·4H 2 O). At ambient pressure, szomolnokite is less compressible than blödite and more than kieserite, but by 7 GPa both szomolnokite and kieserite have approximately the same bulk modulus, while blödite’s remains lower than both phases up to 20 GPa. Furthermore, these results indicate the stability of szomolnokite’s high-pressure monoclinic phase and the retention of water within the structure up to pressures found in planetary deep interiors.

58 GEOSCIENCES↗

Basic Energy Sciences Roundtable: Foundational Science for Carbon Dioxide Removal Technologies (Brochure)

Basic research to identify and understand the fundamental principles governing carbon dioxide removal processes of capture, conversion, and storage is essential for achieving zero carbon emissions by 2050. In March 2022, the Office of Basic Energy Sciences (BES)—in coordination with the US Department of Energy (DOE) technology Offices of Energy Efficiency and Renewable Energy, Fossil Energy and Carbon Management, and Nuclear Energy—held a roundtable titled, “Foundational Science for Carbon Dioxide Removal Technologies,” to discuss the scientific and technical barriers for CO 2 capture, conversion, and storage. Five priority research opportunities were identified to address these scientific and technical challenges and accelerate progress toward the realization of zero carbon emissions. The PROs are as follows: 1) Master Interfacial Processes of CO2 Transport and Reactivity Across Multiple Length and Time Scales; 2) Create Materials that Simultaneously Exhibit Multiple Properties for CO 2 Capture and Release or Conversion; 3) Discover Unconventional Pathways for Energy-Efficient CO 2 Capture, Release, and Conversion; 4) Control Multiphase Interactions Required for CO 2 Conversion into Minerals and Materials; and 5) Achieve Predictive Understanding of Coupled Processes in Complex Subsurface Geologic Systems for Secure Carbon Storage.

36 MATERIALS SCIENCE↗

Local-Scale Framework for Techno-Economic Analysis of Subsurface Hydrogen Storage

The energy sector is evolving toward increased reliance on renewable energy technologies to meet state, national, and organization decarbonization goals. This trend is creating challenges and opportunities with meeting current and future energy demand under the variable supply conditions that most renewables provide. Hydrogen (H 2 ) is a promising energy carrier that may meet the need for both on-demand and long-duration storage to maintain energy security and resilience. Underground hydrogen storage (UHS) is a method of storing H 2 in subsurface geological systems, such as depleted hydrocarbon reservoirs, salt caverns, saline aquifers, hard rock, and other engineered systems. UHS has the potential to store large quantities of H 2 over time, providing a reliable source of energy while minimizing surface footprints at a lower investment cost compared to surface storage. Earlier work estimated that, if converted and retrofitted, existing underground natural gas storage (UGS) facilities in the U.S. can store approximately 327 TWh, or 9.8 million metric tons, of pure H 2 . However, a shift to pure H 2 would decrease the collective working-gas energy of the UGS facilities by approximately 75% due to physical and chemical differences between natural gas and hydrogen. The same work also suggests that almost 75% of the existing UGS facilities in the U.S. could maintain current energy demand buffering using a blend of only 20% H 2 to 80% natural gas, by volume at surface conditions. If we can take advantage of the suite of mature technologies of existing UGS facilities and natural gas utility systems to accelerate the transition to a hydrogen economy in the U.S., a 20% H 2 blend could lead to a 6-7% reduction of greenhouse gas emissions for energy delivered through natural gas utility systems.

03 NATURAL GAS↗

Big Data Meets Geothermal Exploration (CRADA Final Report)

As part of the Cyclotron Road program, Zanskar Geothermal & Minerals, Inc. investigated the application of micro-earthquake and ambient noise seismology methods to imaging and characterizing the structural characteristics and hydrothermal flux of subsurface faults. Significant advances in what could be resolved were enabled by two major developments in seismology: 1) the availability of large-n arrays of low-cost seismometers, and 2) the availability of increased computational power and semi-automated data reduction algorithms. In tandem, these advances may improve the signal-to-noise ratio and spatial precision of the data collected and enable higher-resolution characterization of subsurface fracture systems and their spatio-temporal evolution. These tools supported efforts to reduce dry-hole risk and to improve wellfield productivity for geothermal resource development. In particular, two applications of these advances were evaluated: 1) fracture-seismic imaging, which was used to detect ambient emissions from fluid-filled fractures, and 2) reservoir tomography, which used information about travel paths, source locations, and source parameters of micro-earthquakes to identify areas of enhanced permeability. Integration of these methods provided guidance for siting wells and served as prior constraints for reservoir models, informing forecasts of power potential and production and injection strategies aimed at minimizing temperature decline and improving overall resource productivity.

15 GEOTHERMAL ENERGY↗

Editorial: Hydrology, ecology, and nutrient biogeochemistry at the terrestrial-aquatic interface

Terrestrial-aquatic interfaces (TAI) play important roles in mediating the exchange of water and chemicals between land, surface and subsurface water systems, which is tightly coupled with biogeochemical transformations that influence water quality and ecosystem health (Harvey and Gooseff, 2015; Harvey et al., 2019). Understanding and predicting the interactions between the hydrologic, ecologic, and biogeochemical processes at those interfaces is crucial for the sustainable management of water resources and promotion of healthy ecosystems under different environmental stresses and disturbances, including climate change, human activities, and more frequent occurrence of extreme events. Both process-based and data-driven approaches have emerged to address critical challenges at TAIs as integral parts of the Earth system (e.g., Ward and Packman, 2019; Chen et al., 2021; Dwivedi et al., 2022). In this Research Topic, we sought research that advances the understanding of coupled hydrologic, ecologic, and biogeochemical processes along various TAIs from the summit to sea, e.g., river corridors and coastal TAI systems. We invited observational, experimental, theoretical, analytical, numerical, and data-driven research that aims to understand hydro-biogeochemical processes such as the redox dynamics and biogeochemical transformations of carbon, nutrients, and metals occurring at the TAIs and address their heterogeneity and scaling challenges.

54 ENVIRONMENTAL SCIENCES↗

Policy-Driven Sustainable Saline Drainage Disposal and Forage Production in the Western San Joaquin Valley of California

Environmental policies to address water quality impairments in the San Joaquin River of California have focused on the reduction of salinity and selenium-contaminated subsurface agricultural drainage loads from westside sources. On 31 December 2019, all of the agricultural drainage from a 44,000 ha subarea on the western side of the San Joaquin River basin was curtailed. This policy requires the on-site disposal of all of the agricultural drainage water in perpetuity, except during flooding events, when emergency drainage to the River is sanctioned. The reuse of this saline agricultural drainage water to irrigate forage crops, such as ‘Jose’ tall wheatgrass and alfalfa, in a 2428 ha reuse facility provides an economic return on this pollutant disposal option. Irrigation with brackish water requires careful management to prevent salt accumulation in the crop root zone, which can impact forage yields. The objective of this study was to optimize the sustainability of this reuse facility by maximizing the evaporation potential while achieving cost recovery. This was achieved by assessing the spatial and temporal distribution of the root zone salinity in selected fields of ‘Jose’ tall wheatgrass and alfalfa in the drainage reuse facility, some of which have been irrigated with brackish subsurface drainage water for over fifteen years. Electromagnetic soil surveys using an EM-38 instrument were used to measure the spatial variability of the salinity in the soil profile. The tall wheatgrass fields were irrigated with higher salinity water (1.2–9.3 dS m -1 ) compared to the fields of alfalfa (0.5–6.5 dS m -1 ). Correspondingly, the soil salinity in the tall wheatgrass fields was higher (12.5 dS m -1 –19.3 dS m -1 ) compared to the alfalfa fields (8.97 dS mm -1 –14.4 dS mm -1 ) for the years 2016 and 2017. Better leaching of salts was observed in the fields with a subsurface drainage system installed (13–1 and 13–2). The depth-averaged root zone salinity data sets are being used for the calibration of the transient hydro-salinity computer model CSUID-ID (a one-dimensional version of the Colorado State University Irrigation Drainage Model). This user-friendly decision support tool currently provides a useful framework for the data collection needed to make credible, field-scale salinity budgets. In time, it will provide guidance for appropriate leaching requirements and potential blending decisions for sustainable forage production. This paper shows the tie between environmental drainage policy and the role of local governance in the development of sustainable irrigation practices, and how well-directed collaborative field research can guide future resource management.

54 ENVIRONMENTAL SCIENCES↗

Calcium carbonate minerals as scavengers of metals and radionuclides: Their role in natural attenuation and remediation

Calcium carbonates (CaCO3) are ubiquitous naturally occurring minerals in subsurface sediments. Calcium carbonate coatings are common in many terrestrial environments and are known to coat a variety of reactive mineral surfaces in soils and sediments, altering their reactivity and chemical behavior. For these reasons, contaminant interactions with CaCO3 minerals are relevant to contaminant fate and transport. Significant advancements have been made recently toward identifying relevant contaminant (e.g., U, I, and Cr) attenuation mechanisms, which may also serve as a basis for in situ remediation strategies. Hence, the objective of this review paper is to 1) describe the state-of-knowledge of calcium carbonate minerals as universal scavengers of metals and radionuclides; 2) provide a state of the science of how calcium carbonate interactions affect contaminant fate and transport in the subsurface environmental systems; and 2) provide insights on the use of calcium carbonate natural attenuation mechanisms and their application to the remediation of complex sites. Knowledge gaps are also identified that, when closed, can advance the use of carbonate minerals for in situ remedy applications.

Qafoku, Nikolla↗

About the Complex Natural and Engineered Systems Pillar

Los Alamos National Laboratory is a world leader in applying multi-disciplinary science to complex systems within the Complex Natural and Engineered Systems (CNES) challenge areas. Our search for solutions requires science and technology innovation, as well as an integrated experiment, theory, and modeling and simulation approach. Our research and development spans from improving engineered systems such as nuclear weapons and the power grid, to understanding the interface of human and engineered systems from the subsurface to space, to studying how complex natural systems such as disease and climate impact humanity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Modeled sub-hourly nitrate concentrations in subsurface water across a salt marsh system in Elkhorn Slough, California

Salt marshes are dynamic hydrologic systems where terrestrial groundwater, terrestrial surface water, and seawater mix due to bi-directional flows and pressure gradients. Salt marshes are known to remove excess nitrate from water thereby improving water quality in coastal systems. However, our knowledge of the short-term processes (e.g., intra-tidal) in salt marshes is limited. Further, we lack knowledge about how these short-term dynamics may change as a function of seasonality. To address this knowledge gap, we develope a sampling methodology that allowed us to continuously measure nitrate in subsurface water at three different depths across three marsh elevations at sub-hourly time steps. Here we present a data table with the results of nitrate in porewater across the three salt marsh elevations (information in the data set). We analyzed nitrate with a s::can spectrophotometer. We used the UV-Vis absorbance of the samples to calculate nitrate concentrations using a local calibration library. More information about the methodology can be found in Grande et al (2023). Seasonal and Tidal Variations in Hydrologic Inputs Drive Salt Marsh Porewater Nitrate Dynamics, Hydrological Processes.

54 ENVIRONMENTAL SCIENCES↗

Flow Directions and Ages of Subsurface Water in a Salt Marsh System Constrained by Isotope Tracing

Salt marshes are dynamic hydrologic systems where terrestrial groundwater, terrestrial surface water, and seawater mix due to bi-directional flows and pressure gradients. Due to the counteracting terrestrial and marine forcings that control these environments, we do not comprehensively understand water fluxes in these complex coastal systems. To understand the water sources, flow directions, and velocities in salt marsh porewater, we employed a combination of geochemical tracers and analytical models across a hillslope-to-salt marsh continuum in a salt marsh experiencing daily inundation of estuarine surface water (SW) from tides and mixing of fresh seasonal groundwater. We used tritium ( 3 H) as a hydrologic tracer to assess porewater ages and stable water isotope ($\delta$ 2 H and $\delta$ 18 O) analyses to separate isotopically distinct estuarine and terrestrial groundwater across different depths and landscape positions in the study transect. We employed electrical conductivity to constrain the role of source mixing and evapotranspiration in salt marsh hydrology. Salinity and stable isotopes revealed that transpiration, rather than evaporation, increased subsurface water salinity to concentrations above estuarine SW during summer. Elevated salinity at depth indicated that salt marsh subsurface water is recharged during the dry growing season. Seasonal recharge patterns drive long-term deep subsurface water dynamics across the salt marsh, with 3 H ages of 3–7 years, and daily tidal cycles drive short-term shallow porewater dynamics with 3 H ages of 0 ± 3.6 years. Furthermore, our conceptual understanding of the spatiotemporal changes in SW-subsurface water interactions at the terrestrial-marine interface quantifies the hydrological constraints we are missing to improve our understanding of biogeochemical cycles within the salt marsh.

54 ENVIRONMENTAL SCIENCES↗

Engineering A Low-Cost Kelp Aquaculture System for Community-Scale Seaweed Farming at Nearshore Exposed Sites via User-Focused Design Process

For over 50 years, government fishery agencies have recognized the need to transition excess fishing capacity in coastal waters to aquaculture. For the most part, investment strategies to move wild capture and harvest efforts into aquaculture have failed since the technology and capital expense for entry, such as large fish pens, was not conducive for acceptance. In contrast, low trophic level aquaculture of shellfish and seaweeds is suitable as an addition to the livelihoods of seasonal fishing communities and to those displaced by fishery closures, especially if vessels and gear can be designed around existing fishing infrastructures, thus allowing fishers to maintain engagement with their primary fishery, while augmenting income via aquaculture. In this study, an inexpensive, lightweight, and highly mobile gear for kelp seaweed farming was developed and tested over a 3-year period in southern Maine, USA. The system was different from existing kelp farming operations used in nearshore waters that use low-scope mooring lines, and heavy, deadweight anchors. Instead, a highly mobile, easy to deploy system using lightweight gear was designed for exposed conditions. The entire system fit into fish tote boxes and was loadable onto a standard pickup truck. The seaweed system had small but efficient horizontal drag embedment anchors connected to a chain catenary and pretensioned with simple subsurface flotation. The system was able to be deployed and removed in less than 4 h by a crew of three using a 10 m vessel and produced a harvest of 12.7 kg/m over an 8-month fall-winter growth period. The target group for this seaweed research and development effort were coastal fishing communities who move seasonally into non-fishing occupations in service industries, such as construction, retail, etc. An economic assessment suggests farmers would realize an 8% return on investment after3 years and $13.50/h greater income as compared to a non-farming off season job at minimum wage. This low-cost seaweed farming system for fall-winter operations fits well into a “livelihood” strategy for fishing families who must work multiple jobs in the offseason when their main fishery is unavailable.

St-Gelais, Adam T.↗