SEARCH · Engineering Papers

Results for “space-based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Manned orbit transfer vehicles and their missions

From a study that identified over 100 possible geosynchronous orbit-related applications for manned orbit transfer vehicles (MOTV), a group of 20 are chosen for consideration. These generic missions can be grouped into five categories: (1) inspection service and repair, (2) operation of large systems, (3) debris removal, (4) construction, and (5) unmanned cargo. Among the findings of this study is that space basing permits more efficient use of Space Shuttle flights, since the core propulsion system, crew cabin and general purpose mission hardware need not be launched into space each time. A conservative traffic model shows that $600 million may be saved over five years by space basing, due to the decreased number of Shuttle flights needed to support the space-based MOTV. Crew information, payloads, characteristics of the vehicle, and mission requirements are covered in detail.

Boyland, R. E.↗

NASA NTRS1981

The potential evolution of the space transportation system

An evolutionary plan satisfying the requirements of permanent manned space stations in low orbit by 1990 along with geostationary orbit sortie capabilities by 2000 is proposed. The program, to be gradually implemented with near-term technology, comprises: (1) unmanned platforms in low and geostationary orbits; (2) growth and development of these platforms into manned systems; (3) satellite checkout, handling, repair and maneuvering by means of special techniques, such as teleoperated docking, berthing and component exchange; and (4) transportation, by means of unmanned, cargo-carrying derivatives of the Space Shuttle and reuseable, space-based orbit transfer vehicles. Attention is given the envisioned configurations of both manned and unmanned orbital platforms, through a series of progress diagrams.

Bekey, I.↗

NASA NTRS1981

Infrared charge-injection-device array performance at low background

Low-background tests of a 1 x 32 Si:Bi charge-injection-device (CID) IR detector are carried out to evaluate its feasibility for space-based astronomical observations. Optimum performance is obtained at a temperature of 11 K. The sensitivity is found to compare well with that of discrete extrinsic silicon photoconductors. The measured sensitivity and the apparent absence of anomalous effects make extrinsic silicon CID arrays very promising for astronomical applications.

Mccreight, C. R.↗

NASA NTRS1980

Space Telescope - Design for orbital maintenance

Maintenance and repair of the Shuttle launched Space Telescope (ST) are examined, noting that except for the basic structure, mirrors, cables, and several noncritical items, the entire ST is replaceable or reparable on-orbit. EVA tasks have been designed to avoid contamination, and to provide a reduction in Orbital Replacement Units, a minimal number of doors and openings, and minimized structural weight associated with free-volume. All removable components have been provided with tool-compatible fittings and releases, and standardization of parts has been compromised with considerations of interface with crew handling. Replacement and repair equipment will be carried as an added parcel on Shuttle flights and are not part of the standard Shuttle components. The necessity of designing for crew-aid at ST workstations is suggested to provide sound data for the design of other space-based equipment.

Fisher, H. T.↗

NASA NTRS1981

Space platforms - A cost effective evolution of Spacelab operation

The capabilities added to the Shuttle/Spacelab configuration by the addition of the Power Extension Package (PEP), the Power System (PS), and the Science and Applications Space Platforms (SASP) are reviewed with an emphasis on SASP. SASP are intended for placement in orbit by the Shuttle to test new instruments and systems, for clustering of instrumentation, and for servicing, refurbishment, repair, or augmentation by the Shuttle. The PEP permits extended stays in orbit (30 days), and the PS is an orbital solar array and energy storage system acting as a free flying spacecraft. The Shuttle can deliver payloads to the PS or attach to it for extension of the Spacelab operations. Applications of SASP for long term space-based biological experiments are outlined, and the fact that SASP do not increase the required Shuttle in-orbit time is stressed.

Stofan, A. J.↗

NASA NTRS1982

Adaptively pointing spaceborne radar for precipitation measurements

An auxiliary concept of adaptive pointing is presented as an aid to space-based measurements of precipitation using microwave radar. It is recommended that the instantaneous field of view (IFOV) be limited to cloudy regions of possible precipitation rather than scanning clear-sky areas of no interest. A microwave imager is proposed for scanning ahead of the satellite in order to identify areas of precipitation, and then an on-board antenna controller can reposition the scanning antenna to obtain reflectivities for use in rainfall-reflectivity relationships. The precursor beam could delineate the storm boundaries and determine points of peak intensity which can then be selectively sampled to find the rainfall rate distribution for the storm. The adaptive-beam system is suggested to be implementable using an IR sensor on-board geosynchronous satellites.

Atlas, D.↗

NASA NTRS1982

Advanced technology for earth observation - Data processing

The Experimental Land Observing System (ELOS) is to demonstrate major advances in space-based land observation. Program success will depend upon successful demonstration of both space-segment performance and ground-system capabilities. Increases in data-rate, volume, and processing requirements present substantial challenges to the ground data processing system. ELOS is based on the utilization of the multispectral linear array (MLA) sensor, a solid-state, electronically scanned instrument. Current MLA instrument designs offer a number of capabilities beyond those provided in the Landsat imaging devices. These capabilities include greater resolution, inherent registration, onboard calibration, off-nadir pointing capability, and fore/aft pointing capability. The proposed MLA flight mission scenario will be one of continued growth and will include flights on the Space Transportation System. Attention is also given to ground-to-ground data transport, data capture, and the use of high speed computers.

Heffner, P.↗

NASA NTRS1982

Control systems synthesis for a large flexible space antenna

The problem of control systems synthesis is considered for controlling the rigid-body attitude and elastic motion of a large deployable space-based antenna. Two methods for control systems synthesis are considered. The first method utilizes the stability and robustness properties of the controller consisting of torque actuators and collocated attitude and rate sensors. The second method is based on the linear-quadratic-Gaussian (LQG) control theory. A combination of the two methods, which results in a two-level hierarchical control system, is also briefly discussed. The performance of the controllers is analyzed by computing the variances of pointing errors, feed misalignment errors and surface contour errors in the presence of sensor and actuator noise.

Joshi, S. M.↗

NASA NTRS1981

Rain rate measurement capabilities using a Seasat type radar altimeter

The combined use of a space-based radar and a radiometer for measurement of precipitation is discussed. Phenomena to exploit or overcome is surveyed. Basic measurement problems are discussed. Several active systems are proposed, including three ocean systems and two land-sea systems. Recommendations for future research are given.

Goldhirsh, J.↗

NASA NTRS1981

Differential absorption lidar measurements of atmospheric temperature and pressure profiles

The theory and methodology of using differential absorption lidar techniques for the remote measurement of atmospheric pressure profiles, surface pressure, and temperature profiles from ground, air, and space-based platforms are presented. Pressure measurements are effected by means of high resolution measurement of absorption at the edges of the oxygen A band lines where absorption is pressure dependent due to collisional line broadening. Temperature is assessed using measurements of the absorption at the center of the oxygen A band line originating from a quantum state with high ground state energy. The population of the state is temperature dependent, allowing determination of the temperature through the Boltzmann term. The results of simulations of the techniques using Voigt profile and variational analysis are reported for ground-based, airborne, and Shuttle-based systems. Accuracies in the 0.5-1.0 K and 0.1-0.3% range are projected.

Korb, C. L.↗

NASA NTRS1982

Long term storage of cryogens in space

Experimental design procedures leading to the configuration of a space-based cryogenic fluids test system are reported. Large quantities of cryogenic fluids are expected to be required in space for cooling systems, chemical and electrical OTVs, and resupply tankers. The design was guided by the necessity for representative storage and supply systems to be compatible with the Shuttle. Consideration was given to liquid hydrogen, oxygen, methane, and argon containers and concommitant fluid dynamics, thermal, and structural analyses. A 5% initial ullage was included for the liquids, except for methane, which was calculated at 8.9%. The Ar, CH4, and O2 tanks were set at 12.5 cu m, while the H2 tank was 37.4 cu m. The orbital experiment is required to provide actual thermal stabilization lags in a zero-g environment. Details of the Cryogenic Fluid Management Facility test module for flight on board the Shuttle are presented.

Fester, D. A.↗

NASA NTRS1982

NASA-ESA Spacelab systems and programs; Proceedings of the Seminar, Washington, DC, April 23, 24, 1981

Topics discussed include the development status of the Space Shuttle and Spacelab, with attention to Spacelab subsystem performance capabilities and Shuttle-Spacelab flight operations; Spacelab data management and software for science applications, ESA and Space Shuttle pointing systems, and the Space Shuttle's Office of Space and Terrestrial Applications (OSTA)-1 payload. Also covered are the lessons learned from the first Spacelab mission, the pallet-only mode verification flight of the second Spacelab mission, the objectives of the Spacelab mission D1, its role in the German space program, and its implementation, the impact of Spacelab on space-based life sciences research, the high resolution, large area modular reflector array X-ray telescope to be used by Spacelab, and Space Shuttle contamination effects on UV coronagraphic observations.

Moore, J. W.↗

NASA NTRS1982

On the detection of other planetary systems by astrometric techniques

A quantitative method for astrometrically detecting perturbations induced in a star's motion by the presence of a planetary object is described. A periodogram is defined, wherein signals observed from a star show exactly periodic variations, which can be extracted from observational data using purely statistical methods. A detection threshold is defined for the frequency of occurrence of some detectable signal, e.g., the Nyquist frequency. Possible effects of a stellar orbital eccentricity and multiple companions are discussed, noting that assumption of a circular orbit assures the spectral purity of the signal described. The periodogram technique was applied to 12 yr of astrometric data from the U.S. Naval Observatory for three stars with low mass stellar companions. Periodic perturbations were confirmed. A comparison of the accuracy of different astrometric systems shows that the detection accuracy of a system is determined by the measurement accuracy and the number of observations, although the detection efficiency can be maximized by minimizing the number of data points for the case when observational errors are proportional to the square root of the number of data points. It is suggested that a space-based astrometric telescope is best suited to take advantage of the method.

Black, D. C.↗

NASA NTRS1983

Nuclear Science Symposium, 29th, and Symposium on Nuclear Power, 14th, Washington, DC, October 20-22, 1982, Proceedings

High-energy radiation detectors suitable for balloon-borne or space-based radiation event studies are described. The employment of NaI(Tl) scintillator bars for gamma ray detection is outlined, and the development of a fluorescent gated gas-filled scintillation proportional counter is reported. A high throughput nondispersive hard X ray spectrograph with angular resolution for cosmic bursts, transients, and sources has been constructed. Features of a sealed high pressure xenon filled imaging proportional counter with a 30 sq cm sensitive area are explored. Finally, the various radiation effects on electronic circuitry in a space environment are defined, and an MOS dosimeter for assaying the cumulative radiation flux in a spacecraft due to ambient conditions is characterized.

Davis, W. D.↗

NASA NTRS1982

Radiative energy receiver for high performance energy conversion cycles

An analysis of gas dynamic processes pertinent to the functioning of earth-based and space-based solar electric power plants is presented, with attention given to potassium vapor as the working fluid. A device is described which features focused photon absorption by a nontransparent flowing gas. The feed flow is effected around the outside walls of a cavity receiver to raise efficiencies by trapping reemitted energy. A theoretical study of the interaction of a photon flux with a coaxial particle flux was performed, with the receiver flow treated as a Graetz flow. The critical parameters were defined, including a figure of merit as the gas enthalpy increase to absorbable energy ratio. A small-scale laboratory model was tested in comparison with the theoretically obtained values. Less than 15% of the absorbed energy was lost through dissipation while an 80% conversion efficiency was attained.

Rault, D.↗

NASA NTRS1983

Booster and orbiter configurations

In the recent Future Space Transportation System (FSFS) study, a mission model was selected and a baseline vehicle which best met model requirements was shaped. This baseline was then analyzed for flight performance, structural and subsystem weight, and operation. Figures related to a payload of 150,000 lb in a 20-ft-diam by 90-ft-long envelope became the baseline. The existence of both space-based orbital transfer vehicles (OTVs) and a space station was assumed, taking into account a transfer of the payload from the launch vehicle to OTVs at the space station for final delivery to geosynchronous orbit (GEO). A computer-aided engineering system called Aerospace Vehicle Interactive Design (AVID) was employed in connection with baseline vehicle development. It was found that approximately three-fifth of the payload weight would be cryogenic propellants for OTVs. Attention is given to problems regarding the packaging of cryogenic tankage, a payload shroud, and studies of staging for two different booster propulsion units.

Wilhite, A. W.↗

NASA NTRS1983

An analysis of propulsion options for transport of lunar materials to earth orbit

This paper describes the results of analyses of space-based transportation systems for the transport of extraterrestrial materials from their point of origin on the lunar surface to final delivery point in earth orbit and transport of equipment and supplies for extraterrestrial processing to the operational site. The emphasis has been on the use of near-term (pre-year 2000) propulsion systems, such as advanced chemical (H2, O2) and nuclear-electric systems. More exotic systems (mass drivers, nuclear-thermal rockets, etc.) were also considered to evaluate the potential to be gained by use of post-year 2000 technologies. Finally, the effects of using extraterrestrial propellants (e.g., H2 from lunar polar water-ice for chemical systems) were compared to those of propulsion systems deriving all or part of their propellants from the earth.

Frisbee, R. H.↗

NASA NTRS1983

The importance of the space station as an element of the total Space System architecture

The paper describes the role of the Space Station in the ensemble of the space-based infrastructure necessary for achieving permanent manned presence in space. The major elements of the architecture are identified, functionally interrelated and discussed in terms of their evolutionary development as an extension of current STS capabilities. It is shown that they require a logical succession of flight R&D experiments and demonstrations using the Space Shuttle and the Space Station as test beds. The paper describes the interrelationships between the Space Station and the various major infrastructure elements and shows that the latter are indispensable for full operational utilization of the former. Only the total ensemble of the architecture provide all the necessary prerequisites for permanent manned presence in space.

Bekey, I.↗