Engineering PapersSearch

SEARCH · Engineering Papers

Results for “self configuration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

The performance evaluation of a new neural network based traffic management scheme for a satellite communication network

A neural-network-based traffic management scheme for a satellite communication network is described. The scheme consists of two levels of management. The front end of the scheme is a derivation of Kohonen's self-organization model to configure maps for the satellite communication network dynamically. The model consists of three stages. The first stage is the pattern recognition task, in which an exemplar map that best meets the current network requirements is selected. The second stage is the analysis of the discrepancy between the chosen exemplar map and the state of the network, and the adaptive modification of the chosen exemplar map to conform closely to the network requirement (input data pattern) by means of Kohonen's self-organization. On the basis of certain performance criteria, whether a new map is generated to replace the original chosen map is decided in the third stage. A state-dependent routing algorithm, which arranges the incoming call to some proper path, is used to make the network more efficient and to lower the call block rate. Simulation results demonstrate that the scheme, which combines self-organization and the state-dependent routing mechanism, provides better performance in terms of call block rate than schemes that only have either the self-organization mechanism or the routing mechanism.

Ansari, Nirwan

A new self-adaptive reconstruction method to identify defects through Wigner–Seitz approach

A new self-adaptive reconstruction method based on local atomic structure at any given molecular dynamics (MD) step has been developed in this article. The method can be used in Wigner–Seitz defect analysis approach to correctly and efficiently explore the information of both point defects and complex defect clusters (e.g. dislocation loops and voids) formed after a displacement cascade where the cascade interacts with grain boundaries and/or dislocations. The algorithm and validation are provided in detail. Results for identification of radiation defects during and after cascades interacting with a dislocation network show that the new method can well recognize all simple and complex defects and defect clusters. Thus, this new method provides a totally new way to explore the density and size of radiation defects at atomic scale after complex MD evolution processes, providing correct information to understand and predict radiation damage in materials through atomic simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS

Rational Regulation of Layer‐by‐Layer Processed Active Layer via Trimer‐Induced Pre‐Swelling Strategy for Efficient and Robust Thick‐Film Organic Solar Cells

Thick-film (>300 nm) organic solar cells (OSCs) have garnered intensifying attention due to their compatibility with commercial roll-to-roll printing technology for the large-scale continuous fabrication process. However, due to the uncontrollable donor/acceptor (D/A) arrangement in thick-film condition, the restricted exciton splitting and severe carrier traps significantly impede the photovoltaic performance and operability. For this work, combined with layer-by-layer deposition technology, a twisted 3D star-shaped trimer (BTT-Out) is synthesized to develop a trimer-induced pre-swelling (TIP) strategy, where the BTT-Out is incorporated into the buried D18 donor layer to enable the fabrication of thick-film OSCs. The integrated approach characterizations reveal that the exceptional configuration and spontaneous self-organization behavior of BTT-Out trimer could pre-swell the D18 network to facilitate the acceptor's infiltration and accelerate the formation of D/A interfaces. This enhancement triggers the elevated polarons formation with amplified hole-transfer kinetics, which is essential for the augmented exciton splitting efficiency. Furthermore, the regulated swelling process can initiate the favorable self-assembly of L8-BO acceptors, which would ameliorate carrier transport channels and mitigate carrier traps. As a result, the TIP-modified thin-film OSC devices achieve the champion performance of 20.3% (thin-film) and 18.8% (thick-film) with upgraded stability, among one of the highest performances reported of thick-film OSCs.

36 MATERIALS SCIENCE

Capturing Correlation Effects in Positron Binding to Atoms and Molecules

A major challenge in contemporary electronic structure theory involves the development of methods to describe in a balanced manner the contribution of correlation effects to energy differences. This challenge can be even greater for multicomponent systems containing more than one type of quantum particle. In the present work, we describe a flexible code for carrying out self-consistent field and configuration interaction (CI) calculations on multicomponent systems and use it to generate trial wave functions for use in diffusion Monte Carlo (DMC) calculations of the positron affinity of Be, Be 2 , Be 4 , Mg, CS 2 , and benzene. The resulting positron affinities (PAs) are in good agreement with the best values from the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH

A nearly exact MCSCF+CI calculation of the dissociation energy of OH

The dissociation energy and dipole moment of the ground state of OH have been obtained with a newly developed multiconfiguration, self-consistent field plus configuration interaction CDC 7600 computer program. The computed value of the dissociation energy is 4.62 eV, which is within the uncertainty limits for the experimental value of 4.63 plus or minus 0.01 eV. The computed value of the dipole moment is 1.645 D, which is very close to the experimental result of 1.66 plus or minus 0.01 D. The present results are also compared to the data obtained from similar calculations with the BISON-MC computer program developed by Das and Wahl.

Arnold, J. O.

Theoretical investigation of protonated carbon dioxide

The equilibrium structure of CO2H(+) has been obtained from self-consistent field and configuration interaction wave functions. Only one stable form has been found, a linear O-C-O chain with the hydrogen bonded to oxygen and slightly off axis, in analogy with known isoelectronic species. A second structure protonated at carbon, which has been inferred from mass spectrometric studies, is found to be unstable with respect to spontaneous rearrangement. The proton affinity of CO2 is calculated to be 136 kcal/mole, in reasonable agreement with the most recent experimental value.

Green, S.

An SCF and MCSCF description of the low-lying states of MgO

The paper presents the multiconfiguration-self-consistent (MCSCF) and configuration state functions (CSF) for the low-lying electronic states of MgO. It was shown that simple description of these states was possible provided the 1 Sigma(+) states are individually optimized at the MCSCF level, noting that the 1(3 Sigma)(+) and 2(1 Sigma)(+) states which nominally result from the same electron occupation are separated energetically. The molecular orbitals obtained at this level of approximation should provide a useful starting point for extended configuration interaction calculations since they have been optimized for the particular states of interest.

Bauschlicher, C. W., Jr.

Theoretical electronic transition moments for the Ballik-Ramsay, Fox-Herzberg, and Swan systems of C2

Electronic transition moments and their variation with internuclear separation are calculated for the Ballik-Ramsay (b 3 Sigma g - a 3 Pi u), Fox-Herzberg (e 3 Pi g-a 3 Pi u) and Swan (d 3 Pi g-a 3 Pi u) band systems of C2, which appear in a variety of terrestrial and astrophysical sources. Electronic wave functions of the a 3 Pi u, b 2 Sigma g -, d 3 Pi g and e 3 Pi g states of C2 are obtained by means of a self-consistent field plus configuration interaction calculation using an atomic basis of 46 Slater-type orbitals, and theoretical potential energy curves and spectroscopic constants for the four electronic states were computed. The results obtained for both the potential energy curves and electronic transition moments are found to be in good agreement with experimental data.

Cooper, D. M.

Film thickness measurement for spiral groove and Rayleigh step lift pad self-acting face seals

One Rayleigh step lift pad and three spiral groove self-acting face seal configurations were tested to measure film thickness and frictional torque as a function of shaft speed. The seals were tested at a constant face load of 73 N (16.4 lb) with ambient air at room temperature and atmospheric pressure as the fluid medium. The test speed range was from 7000 to 17,000 rpm. The measured film thickness was compared with theoretical data from mathematical models. The mathematical models overpredicted the measured film thickness at the lower speeds of the test speed range and underpredicted the measured film thickness at the higher speeds of the test speed range.

Dirusso, E.

The dynamics of elliptical rings

The paper investigates the evolution of eccentric rings under the influence of (1) differential precession due to the planetary quadrupole moment; (2) self-gravity; (3) viscous forces due to interparticle collisions; and (4) eccentricity excitation by shepherd satellites. The principal conclusions are that: (1) uniform precession can be enforced by self-gravity; the resulting configuration is both dynamically and secularly stable. (2) due to viscous forces the line of apsides at the inner ring edge is not exactly aligned with the line of apsides at the outer edge; the apse shift may be detectable in the alpha and beta rings of Uranus; (3) the mean eccentricity is determined by a balance between viscous damping and excitation by shepherds; (4) and the dimensionless eccentricity gradient is expected to be positive and of order unity in most eccentric rings, as observed.

Borderies, N.

Theoretical study of the N2(+) Meinel system

Atomic natural orbital Gaussian basis sets and large complete-active-space self-consistent field/multireference configuration-interaction wave functions are used to determine the potential curves for the X 2Sigma(+) sub g and A 2Pi sub u states of N2(+). The dependence of the electronic transition moment between the two states on internuclear distance is accurately determined, and is shown to differ significantly from previous determinations. These theoretically determined lifetimes agree with experimental time-of-flight data within stated experimental error bars.

Langhoff, Stephen R.

Development of a 32-bit UNIX-based ELAS workstation

A mini/microcomputer UNIX-based image analysis workstation has been designed and is being implemented to use the Earth Resources Laboratory Applications Software (ELAS). The hardware system includes a MASSCOMP 5600 computer, which is a 32-bit UNIX-based system (compatible with AT&T System V and Berkeley 4.2 BSD operating system), a floating point accelerator, a 474-megabyte fixed disk, a tri-density magnetic tape drive, and an 1152 by 910 by 12-plane color graphics/image interface. The software conversion includes reconfiguring the ELAs driver Master Task, recompiling and then testing the converted application modules. This hardware and software configuration is a self-sufficient image analysis workstation which can be used as a stand-alone system, or networked with other compatible workstations.

Spiering, Bruce A.

Theoretical characterization of the potential energy surface for H + N2 yields HN2. II - Computed points to define a global potential

A previous calculation for H + N2 (Walch et al., 1989) focused on the minimum energy path (MEP) region of the potential energy surface and on estimates of the lifetime of the HN2 species. In this paper, energies computed at geometries selected to permit a global representation of the potential energy surface (PES) are reported. As in the previous work, the calculations were performed using the complete active space self-consistent field/externally contracted configuration interaction method. The surface was characterized using the same basis set as in the previous paper except that an improved contraction of the H s-basis is used. Calculations with a larger basis set were carried out along an approximate MEP obtained with the smaller basis set. The new PES exhibits a sharp curvature, which was not present in the previous calculations, and has a slightly narrower and smaller barrier to dissociation. Saddle points for H atom exchange via collinear and T shaped HN2 complexes are also reported.

Walch, Stephen P.

Theoretical characterization of the 5Pi and 3Pi potential energy surfaces for NH + O yields N + OH

The reactant, product, and saddle point regions of the 5Pi and 3Pi potential energy surfaces for the reaction NH + O yields N + OH have been characterized using complete active space self consistent field/externally contracted configuration interaction calculations with large atomic natural orbital basis sets. The computed barrier heights are 5.6 and 11.7 kcal/mol on the 5Pi and 3Pi surfaces, respectively. Transition state theory with an Eckart tunneling correction is used to estimate the rate constant on the 5Pi surface.

Walch, Stephen P.

Theoretical Study of the Low-Lying States of TiHe(+),TiNe(+),TiAr(+),VAr(+),CrHe(+),CrAr(+),FeHe(+),FeAr(+),CoHe(+),and CoAr(+)

The potential energy curves for the manifold of molecular states dissociating to the lowest transition metal ion states derived from the 3d(sup n+1) and 3d(sup n)4s(sup 1) occupations have been determined for selected transition-metal ion- rare gas systems. These curves have been computed using large basis sets, and the state-averaged complete- active-space self-consistent-field/multireference configuration interaction level of electron correlation treatment. In general, the families of curves derived from the 3d(sup n+1) and 3d(sup n)4s(sup 1) metal occupations are disjoint; however, for Ti(+) there is a strong mixing of the 3d(sup 2)4s(sup 1) and 3d(sup 3) asymptotes, because of the small separation between the asymptotes. This mixing leads to a failure of single-reference-based techniques; this is discussed in the context of our previous single-reference-based treatments.

Partridge, Harry

Porous airfoil and process

A porous airfoil having venting cavities with contoured barrier walls, formed by a core piece, placed beneath a porous upper and lower surface area that stretches over the nominal chord of an airfoil is employed, to provide an airfoil configuration that becomes self-adaptive to very dissimilar flow conditions to thereby improve the lift and drag characteristics of the airfoil at both subcritical and supercritical conditions.

Hartwich, Peter M.

The Structure, Anharmonic Vibrational Frequencies, and Intensities of NNHNN+

A semi-global potential energy surface (PES) and quartic force field (QFF) based on fitting high-level electronic structure energies are presented to describe the structures and spectroscopic properties of NNHNN+. The equilibrium structure of NNHNN+ is linear with the proton equidistant between the two nitrogen groups and thus of D(sub ∞h) symmetry. Vibrational second-order perturbation theory (VPT2) calculations based on the QFF fails to describe the proton “rattle” motion, i.e., the antisymmetric proton stretch, due to the very flat nature of PES around the global minimum, but performs properly for other modes with sharper potential wells. Vibrational self-consistent field/virtual state configuration interaction (VSCF/VCI) calculations using a version of MULTIMODE without angular momentum terms successfully describe this motion and predict the fundamental to be at 759 cm(exp -1). This is in good agreement with the value of 746 cm(exp -1) from a fixed-node diffusion Monte Carlo calculation and the experimental Ar-tagged result of 743 cm(exp -1). Other VSCF/VCI energies are in good agreement with other experimentally reported ones. Both double-harmonic intensity and rigorous MULTIMODE intensity calculations show the proton transfer fundamental has a very strong intensity.

Astrochemistry

Aerodynamic Characteristics of Several Hypersonic Boost-Glide-Type Configurations at Mach Numbers from 2.30 to 4.63

An investigation has been conducted at Mach numbers from 2.30 to 4.63 to determine the static aerodynamic characteristics of several configurations designed for flight at hypersonic Mach numbers. Two all-wing and three wing-body configurations were tested through an angle-of-attack range from about -4 degrees to 33 degrees and an angle-of-sideslip range from about -4 degrees to 8 degrees at a Reynolds number of 3 times 10 (sup 6) per foot (9.84 times 10 (sup 6) per meter). The results of the investigation indicated that the wing-body configurations produced higher values of maximum lift-drag ratio than those produced by the all-wing models. The high wing-body configurations tend to have a self-trimming capability as opposed to that for the low wing-body configurations. Each of the configurations produced a positive dihedral effect that increased with increasing angle of attack and decreased with increasing Mach number. The high wing-body models produced decreasing values of directional stability with increase in angle of attack, whereas the low wing-body models provided increasing values of directional stability with increase in angle of attack.

Graves, Ernald B.