Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sediments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Can Zn isotopes in sediments record past eutrophication of freshwater lakes? A pilot study at Lake Baldegg (Switzerland)

In this study, the speciation and isotopic composition of Zn were traced across the sediments of a freshwater lake that experienced one hundred years of strong eutrophication, in order to assess the potential of sedimentary Zn isotopes to record such an environmental disturbance. Here, the results indicate that the sedimentary Zn isotope signal varied with the change from pre-eutrophic to eutrophic conditions in the investigated lake. The average δ 66 Zn JMC value of the dominantly allochthonous lithogenic sediments deposited during the pre-eutrophic period was +0.27‰ ±0.05‰ (i.e. similar to the δ 66 Zn JMC value of +0.28‰ ±0.05‰ proposed for Bulk Silicate Earth), while enhanced autochthonous biochemical sedimentation during the eutrophic period resulted in significantly lower δ 66 Zn JMC values down to +0.04‰ ±0.06‰. Synchrotron-based X-ray absorption spectroscopy data revealed a concomitant change in Zn speciation from a dominant fraction of Zn in clay minerals during the pre-eutrophic period to a major fraction of Zn in ZnS during the eutrophic period. A linear regression relating the sedimentary Zn isotope signal to the fraction of Zn in ZnS indicated δ 66 Zn JMC values of +0.27‰ ±0.06‰ and 0.00‰ ±0.08‰ for Zn in clay minerals and in ZnS, respectively. The enrichment of light Zn in ZnS in the eutrophic sediments is tentatively attributed to enhanced biological uptake of light Zn in the water column, which resulted in an enhanced flux of organic-bound Zn towards the sediments and further transformation of organic Zn into ZnS upon biomass mineralization during early diagenesis. This hypothesis is in agreement with the fractionation towards lighter Zn reported for both biological uptake of Zn and ZnS precipitation. The results of this study emphasize the potential of sedimentary Zn isotopes to register past eutrophic periods in freshwater lakes, and thus to serve as a probe of paleo-environmental conditions and/or past land use at the catchment scale.

58 GEOSCIENCES↗

An improved specimen preparation method for marine shallow gas-bearing sand sediments and its validations

Instabilities of shallow gas-charged seabed are potential geological hazards in ocean engineering. In practice, the conventional field sampling techniques failed to obtain undisturbed gas-bearing sediments from the seabed for laboratory mechanical testing because of sensitive gas exsolution and escape from sediments. However, preparation of representative remoulded gas-charged specimens is a challenging issue, because it is rather difficult to quantitatively control the gas content and obtain uniform distribution of gas bubbles within the specimen. Given the above problems, this work proposes a reliable approach to reconstitute the high-saturation specimen of gas-charged sediments in the laboratory by an improved multifunction integrated triaxial apparatus (MITA). This apparatus is developed based on an advanced stress path triaxial system by introducing a temperature-controlled system and a wave-monitoring system. The temperature-controlled system is used to accurately mimic the in situ environments of sediments in the seabed. The wave-monitoring system is utilized to identify exsolution point of free gas and examine the disturbance of gas to specimens during gas exsolution. The detailed procedure of gassy specimen preparation is introduced. Then, the quality of prepared specimens using our improved apparatus is validated by the high-resolution micro-X-ray computed tomography (μCT) scanning test, from which bubble occurrence and size distribution within the gassy sand specimen can be obtained; and preliminary mechanical tests on gassy sand specimens with various initial saturation degrees are performed. The proposed specimen preparation procedure succeeds in proving the postulated occurrence state of gas bubbles in coarse-grained sediments and accurately controlling the gas content.

58 GEOSCIENCES↗

The Kalahari sediments and hominins in southern Africa

In this study, the temporal coupling of the structural evolution of the Kalahari Basin and the accumulation of the Kalahari Group sediments has been an accepted paradigm leading to the assumption that the Kalahari group sediments have been accumulating gradually since the mid-Cretaceous. Here we review the first actual ages for the Kalahari Group based on cosmogenic ages from six geological localities. These results demonstrate that Kalahari Basin infill was a more dynamic process than previously thought and that the Kalahari Group sediments are mostly Plio-Pleistocene in age (~4 Ma to 1–2 Ma). The hiatus between the initial structural subsidence of the basin, during the Cretaceous, and the general young age of the investigated sediments, implies a dynamic landscape in which significant phases of erosion occurred during the Mesozoic and Cenozoic. The magnitude of erosion is manifested by the fact that in many locations Kalahari Neogene to Quaternary sediments overlie Precambrian basement. The age of the present infill of the Kalahari thus falls within the temporal range of the genus Homo. In light of this new understanding, we provide a review of the archaeological evidence from the Kalahari Basin and along its southern fringe. Initial hominin presence is found at Wonderwerk Cave during the Olduvai Event and there is subsequent high-density occupation along the southern fringe of the Kalahari Basin during the Acheulean and the Fauresmith. Middle Stone Age occupation is limited to localities of limited size and small artifact counts and it appears that the focus of human occupation, particularly in the later stages of the Middle Stone Age, shifts southward, including along the coastal regions.

58 GEOSCIENCES↗

Vertical Hydrologic Exchange Flows Control Methane Emissions from Riverbed Sediments

CH 4 emissions from inland waters are highly uncertain in the current global CH 4 budget, especially for streams, rivers, and other lotic systems. Previous studies have attributed the strong spatiotemporal heterogeneity of riverine CH 4 to environmental factors such as sediment type, water level, temperature, or particulate organic carbon abundance through correlation analysis. However, a mechanistic understanding of the basis for such heterogeneity is lacking. Here, in this study, we combine sediment CH 4 data from the Hanford reach of the Columbia River with a biogeochemical-transport model to show that vertical hydrologic exchange flows (VHEFs), driven by the difference between river stage and groundwater level, determine CH 4 flux at the sediment–water interface. CH 4 fluxes show a nonlinear relationship with the magnitude of VHEFs, where high VHEFs introduce O 2 into riverbed sediments, which inhibit CH 4 production and induce CH 4 oxidation, and low VHEFs cause transient reduction in CH 4 flux (relative to production) due to reduced advective CH 4 transport. In addition, VHEFs lead to the hysteresis of temperature rise and CH 4 emissions because high river discharge caused by snowmelt in spring leads to strong downwelling flow that offsets increasing CH 4 production with temperature rise. Our findings reveal how the interplay between in-stream hydrologic flux besides fluvial-wetland connectivity and microbial metabolic pathways that compete with methanogenic pathways can produce complex patterns in CH 4 production and emission in riverbed alluvial sediments.

54 ENVIRONMENTAL SCIENCES↗

Temporal deposition of copper and zinc in the sediments of metal removal constructed wetlands

The objective of this study was to explore the effects of time, seasons, and total carbon (TC) on Copper (Cu) and Zinc (Zn) deposition in the surface sediments. This study was performed at the H-02 constructed wetland on the Savannah River Site (Aiken, SC, USA). Covering both warm (April-September) and cool (October-March) seasons, several sediment cores were collected twice a year from the H-02 constructed wetland cells from 2007 to 2013. Total concentrations of Cu and Zn were measured in the sediments. Concentrations of Cu and Zn (mean ± standard deviation) in the surface sediments over 7 years of operation increased from 6.0 ± 2.8 and 14.6 ± 4.5 mg kg -1 to 139.6 ± 87.7 and 279.3 ± 202.9 mg kg -1 dry weight, respectively. The linear regression model explained the behavior and the variability of Cu deposition in the sediments. On the other hand, using the generalized least squares extension with the linear regression model allowed for unequal variance and thus produced a model that explained the variance properly, and as a result, was more successful in explaining the pattern of Zn deposition. Total carbon significantly affected both Cu ( p = 0.047) and Zn ( p < 0.001). Time effect on Cu deposition was statistically significant ( p = 0.013), whereas Zn was significantly affected by the season ( p = 0.009).

54 ENVIRONMENTAL SCIENCES↗

High wax ester and triacylglycerol biosynthesis potential in coastal sediments of Antarctic and Subantarctic environments

The wax ester (WE) and triacylglycerol (TAG) biosynthetic potential of marine microorganisms is poorly understood at the microbial community level. The goal of this work was to uncover the prevalence and diversity of bacteria with the potential to synthesize these neutral lipids in coastal sediments of two high latitude environments, and to characterize the gene clusters related to this process. Homolog sequences of the key enzyme, the wax ester synthase/acyl-CoA:diacylglycerol acyltransferase (WS/DGAT) were retrieved from 13 metagenomes, including subtidal and intertidal sediments of a Subantarctic environment (Ushuaia Bay, Argentina), and subtidal sediments of an Antarctic environment (Potter Cove, Antarctica). The abundance of WS/DGAT homolog sequences in the sediment metagenomes was 1.23 ± 0.42 times the abundance of 12 single-copy genes encoding ribosomal proteins, higher than in seawater (0.13 ± 0.31 times in 338 metagenomes). Homolog sequences were highly diverse, and were assigned to the Pseudomonadota, Actinomycetota, Bacteroidota and Acidobacteriota phyla. The genomic context of WS/DGAT homologs included sequences related to WE and TAG biosynthesis pathways, as well as to other related pathways such as fatty-acid metabolism, suggesting carbon recycling might drive the flux to neutral lipid synthesis. These results indicate the presence of abundant and taxonomically diverse bacterial populations with the potential to synthesize lipid storage compounds in marine sediments, relating this metabolic process to bacterial survival.

59 BASIC BIOLOGICAL SCIENCES↗

Physical and hydrodynamic properties of deep sea mining-generated, abyssal sediment plumes in the Clarion Clipperton Fracture Zone (eastern-central Pacific)

The anthropogenic impact of polymetallic nodule harvesting in the Clarion-Clipperton Fracture Zone is expected to strongly affect the benthic ecosystem. To predict the long-term, industrial-scale impact of nodule mining on the deep-sea environment and to improve the reliability of the sediment plume model, information about the specific characteristics of deep-sea particles is needed. Discharge simulations of mining-related fine-grained (median diameter ≈ 20 µm) sediment plumes at concentrations of 35–500 mg L –1 (dry weight) showed a propensity for rapid flocculation within 10 to 135 min, resulting in the formation of large aggregates up to 1100 µm in diameter. The results indicated that the discharge of elevated plume concentrations (500 mg L –1 ) under an increased shear rate (G ≥ 2.4 s –1 ) would result in improved efficiency of sediment flocculation. Furthermore, particle transport model results suggested that even under typical deep-sea flow conditions (G ≈ 0.1 s –1 ), rapid deposition of particles could be expected, which would restrict heavy sediment blanketing (several centimeters) to a smaller fall-out area near the source, unless subsequent flow events resuspended the sediments. Planning for in situ tests of these model projections is underway.

42 ENGINEERING↗

Trace Metal Uptake and Mercury Methylation by Sediments from a Stream in Tennessee

The formation and transport of methylmercury (MeHg), a neurotoxin, in aquatic environments is a global concern for human health as MeHg can bioaccumulate and biomagnify to high concentrations in aquatic food webs. MeHg is formed by conversion from inorganic mercury through microbial mediated methylation. Sulfate-reducing bacteria have been identified as the primary organisms responsible for MeHg production. Pure-culture studies suggest that low availability of cobalt and copper may inhibit mercury methylation, but whether such limitations occur in the environment is unclear. To explore the possible interaction between trace metal availability and mercury methylation, sediments from the East Fork Poplar Creek in Oak Ridge, Tennessee were sampled and then incubated in the presence and absence of added dissolved cobalt and copper. Three types of data are provided in this package. The first reports the uptake of dissolved cobalt and copper by these stream sediments on short time scales (24 hours) in the form of final dissolved and adsorbed concentrations. The second data component consists of a time series of dissolved concentrations and pH values for stream sediments incubated with artificial stream water containing different addition levels of dissolved cobalt or copper. The dissolved concentrations reported include total iron, manganese, sulfur, phosphorus, nickel, zinc and cobalt, dissolved concentrations of sulfate and orthophosphate, and the amount of cobalt or copper adsorbed by the sediment. The third data component reports data at 0 and 72 hours of incubation time for stream sediments to which cobalt was added. These data include concentrations of methylmercury with isotope labeling to enable determination of methylation and demethylation rates as well as dissolved concentrations of sulfate, phosphate, chloride, iron, cobalt, and organic carbon. All data are provided in text-based CSV format with header sections indicating the data contained in each file and the corresponding units. Note that "u" is used in place of Greek lower-case mu to indicate the micro prefix on units. A Table of Contents file (Data_package_TableofContents.txt) provides an index for the data contained in the individual files.

54 ENVIRONMENTAL SCIENCES↗

Study of Electrorefiner Sediment Re-Chlorination Options

A study was performed to investigate re-chlorination options for electrorefiner sediment, fulfilling a DOE Level 4 milestone within the Material Recovery and Waste Form Development campaign. The study stems from the recent identification of sediment that had accumulated in a kg-scale uranium electrorefiner at Idaho National Laboratory’s Hot Fuel Examination Facility. The study involved surveying, evaluating, and recommending options for re-chlorinating, or otherwise recovering, actinides from the sediment. Several options were investigated, including chemical and electrochemical techniques on the sediment within the electrorefiner (in situ approaches) or after its removal from the electrorefiner (ex situ approaches). A baseline approach was identified, involving electrolytic reduction of the removed sediment and subsequent electrorefining. Some options were dismissed for various deficiencies, while other options were recommended for further investigation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An Improved Method for Extracting, Sorting, and AMS Dating of Pollen Concentrates From Lake Sediment

High-resolution chronologies are crucial for paleoenvironmental reconstructions, and are particularly challenging for lacustrine records of terrestrial paleoclimate. Accelerator Mass Spectrometry (AMS) radiocarbon measurement of terrestrial macrofossils is the most common technique for building age models for lake sediment cores, but relies on the presence of terrestrial macrofossils in sediments. In the absence of sufficient macrofossils, pollen concentrates represent a valuable source of dates for building high-resolution chronologies. However, pollen isolation and dating may present several challenges, as has been reported by different authors in previous work over the last few decades. Here we present an improved method for extracting, purifying and radiocarbon-dating pollen concentrates using flow cytometry to improve the extraction efficiency and the purity of the pollen concentrates. Overall, the nature of the sediments and the abundance of the pollen represent major considerations in obtaining enough pollen grains and, consequently, enough carbon to be dated. Further, the complete separation of pollen from other forms of organic matter is required to ensure the accuracy of the dates. We apply the method to surface samples and sediment cores recovered from two contrasting lake basins on the eastern side of the Sierra Nevada (California), and describe the variations that may be used to optimize pollen preparation from a variety of sediments.

58 GEOSCIENCES↗

Microbial Communities in Model Seawater-Compensated Fuel Ballast Tanks: Biodegradation and Biocorrosion Stimulated by Marine Sediments

Some naval vessels add seawater to carbon steel fuel ballast tanks to maintain stability during fuel consumption. Marine sediments often contaminate ballast tank fluids and have been implicated in stimulating fuel biodegradation and enhancing biocorrosion. The impact of the marine sediment was evaluated in model ballast tank reactors containing seawater, fuel (petroleum-F76, Fischer–Tropsch F76, or a 1:1 mixture), and carbon steel coupons. Control reactors did not receive fuel. The marine sediment was added to the reactors after 400 days and incubated for another year. Sediment addition produced higher estimated bacterial numbers and enhanced sulfate reduction. Ferrous sulfides were detected on all coupons, but pitting corrosion was only identified on coupons exposed to FT-F76. Aerobic hydrocarbon-degrading bacteria increased, and the level of dissolved iron decreased, consistent with the stimulation of aerobic hydrocarbon degradation by iron. We propose that sediments provide an inoculum of hydrocarbon-degrading microbes that are stimulated by dissolved iron released during steel corrosion. Hydrocarbon degradation provides intermediates for use by sulfate-reducing bacteria and reduces the level of fuel components inhibitory to anaerobic bacteria. The synergistic effect of dissolved iron produced by corrosion, biodegradable fuels, and iron-stimulated hydrocarbon-degrading microbes is a poorly recognized but potentially significant biocorrosion mechanism.

36 MATERIALS SCIENCE↗

Compressional wave velocity and effective stress in unsaturated soil: Potential application for monitoring moisture conditions in vadose zone sediments

Compressional seismic (P-wave) velocities were measured experimentally at different water potentials and confining pressure states using a variety of sediments collected from the US Department of Energy Hanford Site in southeastern Washington State. P-wave velocity was measured in variably saturated sediments using ultrasonic piezoelectric transducers and water potential was measured with a heat dissipation sensor. We propose a model to relate changes in P-wave velocity to soil stress conditions using an effective stress formulation that includes capillary stress as well as adsorptive stress. We show that compressional wave velocities can be related to water potential and confining stress using a model with five fitted parameters. A single set of parameters provides an excellent fit to data acquired from all of the sediment samples. Under very dry conditions, corresponding to low water potentials, water flow occurs in adsorptive thin films associated with very low unsaturated hydraulic conductivities. The results presented here suggest the utility of seismic methods for establishing low water potential and flow conditions within variably saturated Hanford formation sediments and providing feedback on the performance of mitigation efforts such as soil desiccation and surface infiltration barriers. Seismic methods can provide minimally invasive, three-dimensional information on relevant flow conditions in vadose zone sediments as well as changes that occur over time.

Linneman, Dorothy C.↗

Copper transformation, speciation, and detoxification in anoxic and suboxic freshwater sediments

The complex chemistry of copper (Cu) in freshwater sediments at low concentrations is not well understood. We evaluated the transformation processes of Cu added to freshwater sediments under suboxic and anoxic conditions. Freshwater sediments from three sources in Michigan with different characteristics (Spring Creek, River Raisin, and Maple Lake) were spiked with 30 or 60 mg kg -1 Cu and incubated under a nitrogen atmosphere. After 28-d, each treatment subset was amended with organic matter (OM) to promote anoxic conditions and evaluate its effects on Cu speciation. OM addition triggered a shift from suboxic to anoxic conditions, and sequential extractions showed that Cu accordingly shifted from acid-soluble to oxidizable fractions. Extended X-ray absorption fine-structure (EXAFS) spectroscopy revealed that Cu sulfides dominated all anoxic samples except for Spring Creek 30 mg kg -1 , where Cu(I) was predominantly complexed to thiol groups of OM. Covellite and chalcopyrite (CuFeS 2 ) were the predominant Cu species in nearly all anoxic samples, as determined by Raman spectroscopy, scanning electron microscopy, and X-ray absorption near-edge structure (XANES) spectroscopy. Copper reduction also occurred under suboxic conditions: for two of three sediments, around 80% had been reduced to Cu(I), while the remaining 20% persisted as Cu(II) complexed to OM. However, in the third coarsest (i.e., Spring Creek), around 50% of the Cu had been reduced, forming Cu(I)-OM complexes, while the remainder was Cu(II)-OM complexes. Toxicity tests showed that survival of H. azteca and D. magna were significantly lower in suboxic treatments. Anoxic sediments triggered a near-complete transformation of Cu to sulfide minerals, reducing its toxicity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Moisture-mineral interactions drive bacterial and organic matter turnover in glacier-sourced riparian sediments undergoing pedogenesis

Glacial recession is occurring at unprecedented rates resulting in increased sediment accumula-tions in some riverine ecosystems. Increased sediment deposition has implications for ecosystem stability (e.g., floods and river paths) and environmental services (e.g., carbon sequestration). Soils and sediments have an enormous potential to retain carbon (C), predominantly due to sorp-tion to mineral surfaces. However, C persistence may be sensitive to climate-change induced temperature and moisture variations. We coupled ultrahigh resolution organic matter composition classification with bacterial characterization and respiration measurements to test the combined effects of temperature (4 vs 20°C) and moisture (50 vs 100% water-filled pore space) on C turn-over in sediments maintained under different mineralogical conditions (illite-amended vs non-amended). Here we show that the inhibition of CO 2 emissions from the combined effect of in-creased moisture content and illite was reflected in the turnover of key molecular signatures, such as the nominal oxidation state of C, often irrespective of temperature. However, shifts in bacteri-al communities from a coupled moisture-mineral interaction, were temperature-dependent. Our results highlight the importance of moisture in driving mineral-organic interactions and suggest that C in clay-rich, water-saturated sediments is both thermodynamically unfavorable and miner-al-protected from microbial consumption.

58 GEOSCIENCES↗

Molecular Nature of Mineral-Organic Associations within Redox-Active Mountainous Floodplain Sediments

Floodplains are critical terrestrial-aquatic interfaces that act as hotspots of organic carbon (OC) cycling, regulating ecosystem carbon storage as well as export to riverine systems. Within floodplain sediments, regular flooding and textural gradients interact to create dynamic redox conditions. While anaerobic protection of OC upon burial is a well-recognized carbon storage mechanism in redox-active floodplain sediments, the impact of protective mineral-organic associations is relatively unknown. Here we determined the quantitative importance and chemical composition of mineral-organic associations along well-defined redox gradients emerging from textural variations and depth within meander sediments of the subalpine East River watershed (Gothic, CO). Here we characterized mineral-organic associations using a combination of sequential extractions, physical fractionation, and high-resolution mass spectrometry. Across the meander, we found that mineral-associated OC constitutes a significant fraction of total OC, and that extractable iron (Fe) and aluminum (Al) phases as well as high-density isolates were strongly correlated with total OC content, suggesting that mineral-organic associations are quantitatively important for floodplain sediment OC protection. Our mass spectrometry results showed OC associated with increasingly ordered Fe and Al phases are relatively enriched in low-molecular weight, oxidized, aromatic compounds. Surprisingly, however, total OC content showed weak or no correlation with indicators of anaerobic protection, such as relatively bioavailable OC pools (water-extractable and particulate OC) or the molecular weight and oxidation state of OC. Overall, this work highlights that protection of OC bound to reactive mineral phases-in addition to anaerobic protection-can play a quantitatively important role in controlling soil carbon storage in redox-active floodplain sediments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing Physical Properties of Streambed Interface Sediments Using In Situ Complex Electrical Conductivity Measurements

Streambed sediment physical properties such as surface area, are difficult to quantify in situ but exert a high-level control on a wide range of biogeochemical processes and sorption of contaminants. We introduce the use of complex electrical conductivity (CC) methods (also known as spectral-induced polarization (SIP)) that measure both real and imaginary conductivity to noninvasively and efficiently characterize shallow streambed sediments. We explore the method through synthetic modeling, laboratory, and field measurements to demonstrate the sensitivity of imaginary conductivity to sediment surface area, controlled in part by fine-grained iron oxides produced by anoxic groundwater discharge. Laboratory measurements verify expected relationships between CC parameters and sediment properties. Synthetic modeling using a 1D analytical model illustrates the influence of water layer depth and conductivity on the field CC measurements made at the streambed-stream water interface. Specifically, the inverted sediment imaginary conductivity is less impacted by uncertainty in the water layer depth and conductivity relative to the real conductivity and phase shift. Field CC measurements along a landfill-impacted river reveal discrete streambed zones with enhanced bulk surface area generally corresponding to anoxic groundwater discharge zones with high concentrations of fine-grained iron oxide precipitates.

54 ENVIRONMENTAL SCIENCES↗

Isolating Detrital and Diagenetic Signals in Magnetic Susceptibility Records From Methane‐Bearing Marine Sediments

Abstract Volume‐dependent magnetic susceptibility (κ) is commonly used for paleoenvironmental reconstructions in both terrestrial and marine sedimentary environments where it reflects a mixed signal between primary deposition and secondary diagenesis. In the marine environment, κ is strongly influenced by the abundance of ferrimagnetic minerals regulated by sediment transport processes. Post‐depositional alteration by H 2 S, however, can dissolve titanomagnetite, releasing reactive Fe that promotes pyritization and subsequently decreases κ. Here, we provide a new approach for isolating the detrital signal in κ and identifying intervals of diagenetic alteration of κ driven by organoclastic sulfate reduction (OSR) and the anaerobic oxidation of methane (AOM) in methane‐bearing marine sediments offshore India. Using the correlation of a heavy mineral proxy from X‐ray fluorescence data (Zr/Rb) and κ in unaltered sediments, we predict the primary detrital κ signal and identify intervals of decreased κ, which correspond to increased total sulfur content. Our approach is a rapid, high‐resolution method that can identify overprinted κ resulting from pyritization of titanomagnetite due to H 2 S production in marine sediments. In addition, total organic carbon, total sulfur, and authigenic carbonate δ 13 C measurements indicate that both OSR and AOM can drive the observed κ loss, but AOM drives the greatest decreases in κ. Overall, our approach can enhance paleoenvironmental reconstructions and provide insight into paleo‐positions of the sulfate‐methane transition zone, past enhancements of OSR or paleo‐methane seepage, and the role of detrital iron oxide minerals on the marine sediment sulfur sink, with consequences influencing the development of chemosynthetic biological communities at methane seeps.

58 GEOSCIENCES↗

Sediment Records Shed Light on Drivers of Decadal Iron Concentration Increase in a Boreal Lake

Increasing iron (Fe) concentrations are found in lakes on a wide geographical scale but exact causes are still debated. The observed trends might result from increased Fe loading from the terrestrial catchment, but also from changes in how Fe distributes between the water column and the sediments. To get a better understanding of the causes we investigated whether there has been any change in the sediment formation of Fe sulfides (FeS) as an Fe sink in response to declining atmospheric sulfur (S) deposition during recent decades. For our study, we chose Lake Bolmen in southern Sweden, a lake for which we confirmed that Fe concentrations in the water column have strongly increased along with water color during 1966–2018. Our investigations showed that Fe accumulation and speciation varied independently of S accumulation patterns in the Lake Bolmen sediment record. Thus, we were not able to relate the positive trend in Fe concentrations to reduced FeS binding in the sediments. Furthermore, we found that Fe accumulation rates increased along with lake water Fe concentrations, indicating that increased catchment loading rather than a change in the distribution between the sediments and the water column has driven the increase in Fe concentrations. The increased loading may be due to land-use change in the form of an extensive expansion of coniferous forest during the past century. Altered forest management practices and increased precipitation may have led to enhanced weathering and erosion of organic soil layers under aging coniferous forest.

58 GEOSCIENCES↗