Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sectionalizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Measurement of the B{sup 0} Production Cross Section in pp Collisions at {radical}(s)=7 TeV

Measurements of the differential production cross sections d{sigma}/dp{sub T}{sup B} and d{sigma}/dy{sup B} for B{sup 0} mesons produced in pp collisions at {radical}(s)=7 TeV are presented. The data set used was collected by the CMS experiment at the LHC and corresponds to an integrated luminosity of 40 pb{sup -1}. The production cross section is measured from B{sup 0} meson decays reconstructed in the exclusive final state J/{psi}K{sub S}{sup 0}, with the subsequent decays J/{psi}{yields}{mu}{sup +}{mu}{sup -} and K{sub S}{sup 0}{yields}{pi}{sup +}{pi}{sup -}. The total cross section for p{sub T}{sup B}>5 GeV and |y{sup B}|<2.2 is measured to be 33.2{+-}2.5{+-}3.5 {mu}b, where the first uncertainty is statistical and the second is systematic.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cross-Section Comparison for Pu-238 Production in the Advanced Test Reactor at Idaho National Laboratory

Qualification of Advanced Test Reactor (ATR) positions for Pu-238 production has been ongoing at Idaho National Laboratory (INL). The ATR qualifications have stretched over multiple years during which new techniques have been developed and made available for ATR experiment neutronic analysis. As part of the transition to newer codes, new cross-section libraries have been evaluated for use in the Pu-238 production experiment analysis. A comparative study was done using the MCNP ORGIEN Activation Analysis (MOAA) tool between ENDF/B-VII.0 and ENDF/B-VIII.0 cross sections to capture the impact of the change in cross-sections on the analysis needed to qualify Pu-238 production targets. All comparisons were done assuming the ATR GEN-I targets were located in the south flux trap of the ATR. Finally, an overview of how this qualification and potential irradiation fits into Pu-238 is discussed.

07 ISOTOPE AND RADIATION SOURCES↗

Scattering of electron from a disk in 2D electron gas: Full cross section, transport cross section, and the interaction correction

It is known that the presence of the Fermi sea modifies the scattering of an electron from a point-like impurity. This is due to the Friedel oscillations of the electron density around the impurity. These oscillations create an additional scattering potential for incident electrons. The closer the energy of the incident electron to the Fermi level, the stronger the additional scattering. Here, we study this effect for the case when the impurity is not point-like but rather a hard disk, with a radius much bigger than the de Broglie wavelength. We start with a careful examination of the full and transport cross sections from an extended target. Both cross sections approach their limiting values upon increasing the wave vector of the incident electron. We establish that the transport cross section saturates much faster than the full cross section. With regard to the interaction correction, we establish that it vanishes for the full cross section, while for the transport cross section, it is enhanced compared to the case of a point-like scatterer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Copper K-shell emission cross sections for laser–solid experiments

Published measurements and models of the cross section for electrons causing K-shell emission from copper are reviewed to find a suitable expression to use when analyzing K{sub α}-emission measurements in laser–solid experiments at peak intensities above 10{sup 18} W/cm{sup 2}. Few measurements exist in the 0.1- to 10-MeV electron energy range currently of interest, leaving a number of possible suitable models that are summarized here with a number of typing errors corrected. Two different limiting forms for the cross section at relativistic energies are used, and existing measurements do not give a clear indication as to which is correct. Comparison with the limiting form of electron stopping power indicates an alternative relativistic form and also that the density-effect correction will be important in copper above 10 MeV. For data analysis relying on relative K{sub α} emission caused by electrons with energy much greater than the K-shell binding energy, the existing uncertainty in cross sections is unimportant, but it will be a source of uncertainty when using absolute values and for electron energies up to ∼6× the binding energy. K-shell emission caused by photons and protons is also briefly reviewed.

74 ATOMIC AND MOLECULAR PHYSICS↗

The impact of updated Zr neutron-capture cross sections and new asymptotic giant branch models on our understanding of the S process and the origin of stardust

We present model predictions for the Zr isotopic ratios produced by slow neutron captures in C-rich asymptotic giant branch (AGB) stars of masses 1.25-4 M {sub ☉} and metallicities Z = 0.01-0.03, and compare them to data from single meteoritic stardust silicon carbide (SiC) and high-density graphite grains that condensed in the outflows of these stars. We compare predictions produced using the Zr neutron-capture cross sections from Bao et al. and from n{sub T}OF experiments at CERN, and present a new evaluation for the neutron-capture cross section of the unstable isotope {sup 95}Zr, the branching point leading to the production of {sup 96}Zr. The new cross sections generally present an improved match with the observational data, except for the {sup 92}Zr/{sup 94}Zr ratios, which are on average still substantially higher than predicted. The {sup 96}Zr/{sup 94}Zr ratios can be explained using our range of initial stellar masses, with the most {sup 96}Zr-depleted grains originating from AGB stars of masses 1.8-3 M {sub ☉} and the others from either lower or higher masses. The {sup 90,} {sup 91}Zr/{sup 94}Zr variations measured in the grains are well reproduced by the range of stellar metallicities considered here, which is the same needed to cover the Si composition of the grains produced by the chemical evolution of the Galaxy. The {sup 92}Zr/{sup 94}Zr versus {sup 29}Si/{sup 28}Si positive correlation observed in the available data suggests that stellar metallicity rather than rotation plays the major role in covering the {sup 90,} {sup 91,} {sup 92}Zr/{sup 94}Zr spread.

79 ASTRONOMY AND ASTROPHYSICS↗

Relative {sup 235}U(n,{gamma}) and (n,f) cross sections from {sup 235}U(d,p{gamma}) and (d,pf)

The internal surrogate ratio method allows for the determination of an unknown cross section, such as (n,{gamma}), relative to a better-known cross section, such as (n,f), by measuring the relative exit-channel probabilities of a surrogate reaction that proceeds through the same compound nucleus. The validity of the internal surrogate ratio method is tested by comparing the relative {gamma} and fission exit-channel probabilities of a {sup 236}U* compound nucleus, formed in the {sup 235}U(d,p) reaction, to the known {sup 235}U(n,{gamma}) and (n,f) cross sections. A model-independent method for measuring the {gamma}-channel yield is presented and used.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron physics of the Re/Os clock. I. Measurement of the (n,gamma) cross sections of {sup 186,187,188}Os at the CERN n{sub T}OF facility

The precise determination of the neutron capture cross sections of {sup 186}Os and {sup 187}Os is important to define the s-process abundance of {sup 187}Os at the formation of the solar system. This quantity can be used to evaluate the radiogenic component of the abundance of {sup 187}Os due to the decay of the unstable {sup 187}Re (t{sub 1/2}=41.2 Gyr) and from this to infer the time duration of the nucleosynthesis in our galaxy (Re/Os cosmochronometer). The neutron capture cross sections of {sup 186}Os, {sup 187}Os, and {sup 188}Os have been measured at the CERN n{sub T}OF facility from 1 eV to 1 MeV, covering the entire energy range of astrophysical interest. The measurement has been performed by time-of-flight technique using isotopically enriched samples and two C{sub 6}D{sub 6} scintillation detectors for recording the prompt gamma rays emitted in the capture events. Maxwellian averaged capture cross sections have been determined for thermal energies between kT=5 and 100 keV corresponding to all possible s-process scenarios. The estimated uncertainties for the values at 30 keV are 4.1, 3.3, and 4.7% for {sup 186}Os, {sup 187}Os, and {sup 188}Os, respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutrino and antineutrino inclusive charged-current cross section measurements with the MINOS near detector

The energy dependence of the neutrino-iron and antineutrino-iron inclusive charged-current cross sections and their ratio have been measured using a high-statistics sample with the MINOS near detector exposed to the NuMI beam from the main injector at Fermilab. Neutrino and antineutrino fluxes were determined using a low hadronic energy subsample of charged-current events. We report measurements of {nu}-Fe ({nu}-Fe) cross section in the energy range 3-50 GeV (5-50 GeV) with precision of 2%-8% (3%-9%) and their ratio which is measured with precision 2%-8%. The data set spans the region from low energy, where accurate measurements are sparse, up to the high-energy scaling region where the cross section is well understood.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the ZZ production cross section in pp̄ collisions at √s=1.96 TeV

We present a new measurement of the production cross section σ(pp̄→ZZ) at a center-of-mass energy s√=1.96 TeV, obtained from the analysis of the four charged lepton final state l⁺l⁻l'⁺l'⁻ (l, l'=e or μ). We observe ten candidate events with an expected background of 0.37±0.13 events. The measured cross section σ(pp̄→ZZ)=1.26 +0.47 -0.37 (stat)±0.14(syst) pb is in agreement with NLO QCD predictions. This result is combined with a previous result from the ZZ→l⁺l⁻νν¯ channel resulting in a combined cross section of σ(pp̄→ZZ)=1.40 +0.43 -0.37 (stat)±0.14(syst) pb.

Abazov, V. M.↗

Hard X-ray Nano Patterning using a Sectioned Multilayer

We report a hard x-ray patterning capable of drawing lines with a width below 100 nm using x-rays at 0.165 nm. A specially prepared mask based on multilayer growth technology was used as an x-ray mask effectively. The x-ray Talbot effect in near field was investigated and utilized in the patterning. Since multilayers with a few nanometer layer spacing are readily available, the proposed hard x-ray nano patterning, free of the limit imposed by the Rayleigh criterion in optical range, can potentially be an ultimate optical lithography technique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Differential cross section measurements for γ n → π - p above the first nucleon resonance region

The quasifree gamma d -> pi(-)p(p) differential cross section has been measured with CLAS at photon beam energies E-gamma from 0.445 to 2.510 GeV (corresponding to W from 1.311 to 2.366 GeV) for pion center-of-mass angles cos theta(c.m.)(pi) from -0.72 to 0.92. A correction for final state interactions has been applied to these data to extract the gamma n -> pi(-)p differential cross sections. These cross sections are quoted in 8428 (E-gamma, cos theta(c.m)(pi)) bins, a factor of nearly 3 increase in the world statistics for this channel in this kinematic range. These new data help to constrain coupled-channel analysis fits used to disentangle the spectrum of N* resonances and extract their properties. Selected photon decay amplitudes N* -> gamma n at the resonance poles are determined for the first time and are reported here.

CLAS Collaboration↗

Measurement of inclusive jet and dijet cross sections in proton-proton collisions at 7 TeV centre-of-mass energy with the ATLAS detector

Jet cross sections have been measured for the first time in proton-proton collisions at a centre-of-mass energy of 7 TeV using the ATLAS detector. The measurement uses an integrated luminosity of 17 nb -1 recorded at the Large Hadron Collider. The anti-k t algorithm is used to identify jets, with two jet resolution parameters, R=0.4 and 0.6. The dominant uncertainty comes from the jet energy scale, which is determined to within 7% for central jets above 60 GeV transverse momentum. Inclusive single-jet differential cross sections are presented as functions of jet transverse momentum and rapidity. Dijet cross sections are presented as functions of dijet mass and the angular variable χ. The results are compared to expectations based on next-to-leading-order QCD, which agree with the data, providing a validation of the theory in a new kinematic regime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the prompt J /$\psi$ pair production cross-section in pp collisions at $\sqrt{s} = 8$ TeV with the ATLAS detector

The production of two prompt J/ψ mesons, each with transverse momenta p T > 8.5 GeV and rapidity |y| < 2.1, is studied using a sample of proton-proton collisions at $\sqrt{s} = 8$ TeV, corresponding to an integrated luminosity of 11.4 fb –1 collected in 2012 with the ATLAS detector at the LHC. The differential cross-section, assuming unpolarised J/ψ production, is measured as a function of the transverse momentum of the lower-p T J/ψ meson, di-J/ψp T and mass, the difference in rapidity between the two J/ψ mesons, and the azimuthal angle between the two J/ψ mesons. The fraction of prompt pair events due to double parton scattering is determined by studying kinematic correlations between the two J/ψ mesons. The total and double parton scattering cross-sections are compared with predictions. The effective cross-section of double parton scattering is measured to be σ eff = 6.3 ± 1.6(stat)±1.0(syst) mb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Total Cross Sections as a Surrogate for Neutron Capture: An Opportunity to Accurately Constrain (n,γ) Cross Sections for Nuclides Beyond the Reach of Direct Measurements

There are many (n,γ) cross sections of great interest to radiochemical diagnostics and to nuclear astrophysics which are beyond the reach of current measurement techniques, and likely to remain so for the foreseeable future. In contrast, total neutron cross sections currently are feasible for many of these nuclides and provide almost all the information needed to accurately calculate the (n,γ) cross sections via the nuclear statistical model (NSM). I demonstrate this for the case of 151 Sm; NSM calculations constrained using average resonance parameters obtained from total cross section measurements made in 1975, are in excellent agreement with recent 151 Sm (n,γ) measurements across a wide range of energy. Furthermore, I demonstrate through simulations that total cross section measurements can be made at the Manuel Lujan Jr. Neutron Scattering Center at the Los Alamos Neutron Science Center for samples as small as 10μg. Samples of this size should be attainable for many nuclides of interest. Finally, I estimate that over half of the radionuclides identified ~20 years ago as having (n,γ) cross sections of importance to s-process nucleosynthesis studies (24/43) and radiochemical diagnostics (11/19), almost none of which have been measured, can be constrained using this technique.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Solid oxide fuel cell power plant having a fixed contact oxidation catalyzed section of a multi-section cathode air heat exchanger

The multi-section cathode air heat exchanger (102) includes at least a first heat exchanger section (104), and a fixed contact oxidation catalyzed section (126) secured adjacent each other in a stack association. Cool cathode inlet air flows through cool air channels (110) of the at least first (104) and oxidation catalyzed sections (126). Hot anode exhaust flows through hot air channels (124) of the oxidation catalyzed section (126) and is combusted therein. The combusted anode exhaust then flows through hot air channels (112) of the first section (104) of the cathode air heat exchanger (102). The cool and hot air channels (110, 112) are secured in direct heat exchange relationship with each other so that temperatures of the heat exchanger (102) do not exceed 800.degree. C. to minimize requirements for using expensive, high-temperature alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗