Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Mechanism of astatine and bismuth sorption on extraction chromatography resins from nitric acid media

Systematic study of astatine (At) sorption on extraction chromatography resins from nitric acid media has been performed at Texas A&M University. This work covers commercially available resins such as LN, TK400, SR, TRU, and UTEVA. Acquiring an understanding of At behavior in up to 4 M HNO 3 solutions is a key step to develop a rapid and reliable system for At separation and purification. The determined distribution coefficients are greater than 20 for all the resins studied, reaching 400 for TRU and UTEVA resins. The sorption uptake decreases in the order: TRU ≳ UTEVA >TK400 ≳ SR >LN. For each resin a thermodynamic model has been developed to suggest a possible mechanism of At sorption and corresponding sorption constants have been estimated. Literature data along with new results on bismuth (Bi) sorption by studied resins in nitric acid media have been reviewed and a mathematical model to describe its behavior has been suggested. A ratio of corresponding fit functions of At and Bi assigned to the same resin and acidity has been used to estimate separation factors of these elements. Furthermore, only the TRU resin is not suitable for efficient At isolation from Bi, while the other four resins demonstrate promising results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DGEBF epoxy blends for use in the resin impregnation of extremely large composite parts

Large superconducting electromagnets used in fusion reactors utilize a large amount of glass/epoxy composite for electrical insulation and mechanical and thermal strengths. Moreover, the manufacture of these magnets involves wrapping each superconducting cable bundle with dry glass cloth followed by the vacuum-assisted resin transfer molding of the entire magnet. Due to their enormous size (more than 100 tons), it requires more than 40 h for resin impregnation and the subsequent pressure cycles to ensure complete impregnation and removal of any trapped air pockets. Diglycidyl ether of bisphenol F epoxy resin cross-linked with methyltetrahydrophthalic anhydride with an accelerator has been shown to be a good candidate for use in composite parts requiring long impregnation cycles. Viscosity, gel time, and glass transition temperature of four resin-blends of diglycidyl ether of bisphenol F resin system were monitored as a function of time and temperature with an objective to find the blend that provides a working window longer than 40h at low viscosity without lowering its glass transition temperature. A resin-blend in the weight ratios of resin:hardener:accelerator=100:82:0.125 is shown to provide more than 60h at low resin viscosity while maintaining the same glass transition temperature as obtained with previously used resin-blends, based on the results.

36 MATERIALS SCIENCE↗

Acetylene-chromene terminated resins as high temperature thermosets

A novel phase transfer catalyzed process for the preparation of propargyl ethers has been developed. The propargyl ethers serve as precursors to a new class of thermosetting resins called acetylene-chromene terminated (ACT) resins. Heat treatment of a solution of propargyl ethers with various catalysts, followed by removal of solvent leads to the ACT resins via partial conversion of the propargyl ether groups to chromenes. This process reduces the energy content of the resin systems and reduces the amount of shrinkage found during cure. Due to the presence of the solvent the process is safe and gives rise to low viscosity products suitable for resin transfer molding and filament winding type applications. Due to the high glass transition temperature, high modulus, and low moisture uptake the cured resins display better than 232 C/wet performance. The thermal stability of the ACT resins in air at 204 C is superior to that of conventional bismaleimide resins. The resins also display excellent electrical properties.

Godschalx, J. P.↗

Phenylethynyl Containing Polyarylene Ethers/Polyimides Resin Infiltration of Composites

The following tasks were performed at NCA&TSU during the second year in performance of the grant. LaRC-LV-1 13 resin was synthesized at NCA&TSU. In order to perform the synthesis, glassware and needed apparatus were purchased with grant funds along with the appropriate monomers. It was found that the LaRC-LV-1 13 resin was easily synthesized by the NMP solvent/toluene imminization/distilled water precipitation process. However, in use this resin exhibited a bubbling/foaming behavior during cure that was detrimental leading to the production of composite panels having a high void content. Composite panels were fabricated using compression molding and resin transfer molding (RTM) techniques. Initial fiber volume determinations were computed at NCA&TSU along with NASA-Langley measured c-scans on the panels produced. The initial results indicated a unsatisfactory level of approximately 20% by volume of voids. Testing of uniaxial coupons in compression to failure also agreed with these results. The uniaxial coupons delaminated as the major mode of failure indicative of an unacceptably low level of resin and to much void content in the final composites produced. In discussions with Dr. Brian Jensen, it was suggested the void fraction needs to be reduced to at least 2% by volume for a useful composite. The panels produced used both resin synthesized at NASA-Langley and NCA&TSU. In reviewing our progress over the past year, it was noted that the resin as formulated by the current synthesis process bubbled at elevated temperature. This was especially observed in neat resin slugs cured at the recommended one, four and eight hour cure temperatures. Pressurized cures where then performed with pressures up to 200 psi and simultaneously the lowest eight hour cure temperatures. Although this procedure reduced the amount of bubbles to some extent in the neat resin slugs it did not completely eliminate them. The cure reaction appears to be very energetic even at the lowest recommended cure temperature. Currently, the pressurized cure apparatus developed at NCA&TSU is limited to 200 psi.

Dunn, DeRome O.↗

Strain Rate Sensitivity of Epoxy Resin in Tensile and Shear Loading

The mechanical response of E-862 and PR-520 resins is investigated in tensile and shear loadings. At both types of loading the resins are tested at strain rates of about 5x10(exp 5), 2, and 450 to 700 /s. In addition, dynamic shear modulus tests are carried out at various frequencies and temperatures, and tensile stress relaxation tests are conducted at room temperature. The results show that the toughened PR-520 resin can carry higher stresses than the untoughened E-862 resin. Strain rate has a significant effect on the response of both resins. In shear both resins show a ductile response with maximum stress that is increasing with strain rate. In tension a ductile response is observed at low strain rate (approx. 5x10(exp 5) /s), and brittle response is observed at the medium and high strain rates (2, and 700 /s). The hydrostatic component of the stress in the tensile tests causes premature failure in the E-862 resin. Localized deformation develops in the PR-520 resin when loaded in shear. An internal state variable constitutive model is proposed for modeling the response of the resins. The model includes a state variable that accounts for the effect of the hydrostatic component of the stress on the deformation.

Gilat, Amos↗

System for removing contaminants from plastic resin

A resin recycling system that produces essentially contaminant-free synthetic resin material in an environmentally safe and economical manner. The system includes receiving the resin in container form. A grinder grinds the containers into resin particles. The particles are exposed to a solvent in one or more solvent wash vessels, the solvent contacting the resin particles and substantially removing contaminants on the resin particles. A separator is used to separate the resin particles and the solvent. The resin particles are then placed in solvent removing element where they are exposed to a solvent removing agent which removes any residual solvent remaining on the resin particles after separation.

Bohnert, George W↗

High performance, rapid thermal/UV curing epoxy resin for additive manufacturing of short and continuous carbon fiber epoxy composites

An additive manufacturing resin system including an additive manufacturing print head; a continuous carbon fiber or short carbon fibers operatively connected to the additive manufacturing print head; and a tailored resin operatively connected to the print head, wherein the tailored resin has a resin mass and wherein the tailored resin includes an epoxy component, a filler component, a catalyst component, and a chain extender component; wherein the epoxy component is 70-95% of the resin mass, wherein the filler component is 1-20% of the resin mass, wherein the catalyst component is 0.1-10% of the resin mass, and wherein the chain extender component is 0-50% of the resin mass.

36 MATERIALS SCIENCE↗

Apparatus and method for removing solvent from carbon dioxide in resin recycling system

A two-step resin recycling system and method solvent that produces essentially contaminant-free synthetic resin material. The system and method includes one or more solvent wash vessels to expose resin particles to a solvent, the solvent contacting the resin particles in the one or more solvent wash vessels to substantially remove contaminants on the resin particles. A separator is provided to separate the solvent from the resin particles after removal from the one or more solvent wash vessels. The resin particles are next exposed to carbon dioxide in a closed loop carbon dioxide system. The closed loop system includes a carbon dioxide vessel where the carbon dioxide is exposed to the resin, substantially removing any residual solvent remaining on the resin particles after separation. A separation vessel is also provided to separate the solvent from the solvent laden carbon dioxide. Both the carbon dioxide and the solvent are reused after separation in the separation vessel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tc-99 Ion Exchange Resin Testing

Pacific Northwest National Laboratory was contracted by CHPRC to evaluate the release of 99Tc from spent resin used to treat water from well 299-W15-765 and stored for several years. The key questions to be answered are: 1) does 99Tc readily release from the spent ion exchange resin after being in storage for several years; 2) if hot water stripping is used to remove the co-contaminant carbon tetrachloride, will 99Tc that has been sequestered by the resin be released; and 3) can spent resin be encapsulated into a cementitious waste form; if so, how much 99Tc would be released from the weathering of the monolith waste form? The results from the long term stability leach test results confirm that the resin is not releasing a significant amount of the sequestered 99Tc, evident by the less than 0.02% of the total 99Tc loaded being identified in the solution. Furthermore, it is possible that the measured 99Tc concentration is the result of 99Tc contained in the pore spaces of the resin. In addition to these results, analyses conducted to examine the impact of hot water on the release of 99Tc suggest that only a small percentage of the total is being released. This suggest that hot water stripping to remove carbon tetrachloride will not have a significant affect on the resin’s ability to hold-on to sequestered 99Tc. Finally, encapsulation of spent resin in a cementitious material may be a viable disposal option, but additional tests are needed to examine the extent of physical degradation caused by moisture loss and the effect this degradation process can have on the release of 99Tc.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Composition Variation on Isothermal Rapid Curing Resins for Aerospace Applications

To meet the projected demand for single-aisle composite aircraft in 2040, the production rate of these aircraft will need to increase by four to six times what is currently achievable. A composite manufacturing process with the potential to enable the targeted rates is isothermal resin infusion where infusion and cure occur at the same temperature. However, presently there is not an accepted aerospace-grade resin that can support this isothermal infusion process and maintain acceptable resin properties. Therefore, resin development initiatives have designed anionic catalyzed epoxy systems capable of isothermal infusion and rapid cure at a temperature below 100 ˚C in one hour. High-performance aerospace properties are achieved after undergoing a freestanding post-cure. The resins facilitate faster, energy efficient production cycles by reducing the time and temperature required for cure and eliminating temperature ramps typically required of materials used in the aerospace industry. This work discusses several of the developed resin systems and the impact of varying composition on rheological, thermal, and mechanical properties. Carbon fiber composites were fabricated for one composition by resin transfer molding to demonstrate the potential of these isothermal, rapid cure systems for meeting industry needs.

resin transfer molding↗

Synthesis and Magnetic Properties of Soft Magnetic Composites Based on Silicone Resin-Coated Iron Powders

Iron-based soft magnetic composites with silicone resin coating have been designed to reduce the core loss and improve the magnetic properties of cores. The silicone resin serving as electrical insulating layer was modified by 3-glycidoxypropyltrimethoxy silane, and the effect of silicone resin content, coupling agent, annealing treatment, and thermal cycling on the magnetic properties of composites was investigated in the frequency range from DC to 150 kHz. The coated silicone resin insulating layer was characterized by scanning electron microscopy and energy dispersive spectroscopy. The results showed that the optimum coating content of silicone resin to attain the acceptable permeability and the minimum magnetic loss for the prepared composites is 4 wt%. The sample with silicone resin coat exhibited better DC-bias superposition characteristics compared to the uncoated sample, 6 wt% silicone resin coating sample have excellent percentage effective permeability (84.8%) under 50 Oe applied field. AC magnetic properties evaluated at 1 and 100 kHz do not vary with a 95% confidence interval with the number of thermal cycles; therefore, the properties of the silicone resin-insulating composites are stable under thermal cycling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Process for the Recovery of Actinide and Lanthanide Oxides via Thermal Decomposition and Calcination of Loaded Diglycolamide Resin

Diglycolamide (DGA) resin, a product produced by Eichrom Technologies, Inc. employs TODGA (N,N,N',N'-tetraoctyldiglycolamide) as the active extractant, which will be used by Savannah River National Laboratory to extract trivalent actinides and lanthanides from dissolved irradiated Mark-18A targets. The final form of the extracted material will be an oxide suitable for shipment. A two-step process was developed and validated for the direct recovery of actinides and lanthanides loaded on I-grade DGA resin as nitrates by thermally drying and decomposing resin loaded with Nd(III), a surrogate for trivalent actinides and lanthanides, under inert conditions followed by calcining the resultant residue in air to provide an oxide product. Further, a stepwise heating profile up to 385°C under argon gas flow resulted in 85% to 89% mass loss during the resin drying and decomposition step, and calcination of the resultant Nd-loaded resin residue provided an overall material mass loss of ≥ 98%. Recoveries from resin saturated with Nd(III) from 7 M and 0.35 M nitric acid subjected to this process were 30.7 mg and 27.6 mg Nd/g dry resin, respectively, representing an average of 96.1% of Nd retained in the resin bed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Modeling Ion-Exchange Processing With Spherical Resins For Cesium Removal

The spherical Resorcinol-Formaldehyde and hypothetical spherical SuperLig(r) 644 ion-exchange resins are evaluated for cesium removal from radioactive waste solutions. Modeling results show that spherical SuperLig(r) 644 reduces column cycling by 50% for high-potassium solutions. Spherical Resorcinol Formaldehyde performs equally well for the lowest-potassium wastes. Less cycling reduces nitric acid usage during resin elution and sodium addition during resin regeneration, therefore, significantly decreasing life-cycle operational costs. A model assessment of the mechanism behind ''cesium bleed'' is also conducted. When a resin bed is eluted, a relatively small amount of cesium remains within resin particles. Cesium can bleed into otherwise decontaminated product in the next loading cycle. The bleed mechanism is shown to be fully isotherm-controlled vs. mass transfer controlled. Knowledge of residual post-elution cesium level and resin isotherm can be utilized to predict rate of cesium bleed in a mostly non-loaded column. Overall, this work demonstrates the versatility of the ion-exchange modeling to study the effects of resin characteristics on processing cycles, rates, and cold chemical consumption. This evaluation justifies further development of a spherical form of the SL644 resin.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Shipping Grossly Dewatered resins in the RT-100 Type B Transportation Cask - 16068

Ion-exchange resins are used in the purification of coolant water in boiling water reactor nuclear power plants. The spent resins are a form of low-level or intermediate-level radioactive waste. These resins may have a relatively high specific activity level and are normally transported to a disposal facility within a secondary container placed in a Type B transportation cask. During transportation, hydrogen gas may build up in the cask due to radiolysis of the hydrogenous material in the contents. In the licensing process, a Type B cask is carefully analyzed to ensure that the maximum amount of hydrogen gas generated does not exceed 5%. The calculation to determine the mole fraction of hydrogen gas generated is a function of many variables, including the properties of the contents and the volume ratios of the contents. Because water generates hydrogen gas when it undergoes radiolysis, the amount of water present in the waste is normally limited. Typically, Type B transportation casks are allowed to carry dewatered resins, meaning less than 1% free-standing water by volume. To ensure compliance with this limitation, the dewatering process requires specialized equipment to pump the water from the secondary container. In an effort to enhance the usability of the RT-100 Type B transportation cask, Robatel Technologies re-analyzed the hydrogen gas generation calculation for contents including 'grossly dewatered' resins. Grossly dewatered resins are defined as resins containing less than 20% free-standing water by volume. This higher limit is made possible by a more thorough hydrogen gas generation calculation, which ensures that the flammability limit is not reached during shipment. In July 2015, The USNRC issued Revision 1 of the Certificate of Compliance for the Robatel Technologies RT-100 Type B transportation cask. This revision allows the cask to be used for grossly dewatered resins. With the revised Certificate of Compliance, the RT-100 is the first of its kind whose authorized contents include greater than 1% free liquids by volume. As a result of this change, the cask user can meet the 20% maximum free-standing water volume with a much simpler gravity-driven dewatering process. It is no longer necessary to have a complex dewatering system to ensure compliance with regulatory requirements. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Using the Diffusion Equation to Predict CST Resin Breakthroughs - 19051

The crystalline silicotitanate, CST, resin manufactured by UOP Honeywell is well-suited for single-use decontamination of caustic liquid wastes at Hanford and Savannah River Sites. There are many measurements of column loading and breakthrough for CST resin decontamination of Cs-137 in various Hanford and SRS waste simulants. Such measurements provide a very good basis for estimating CST resin demand and these more refined predictions make the CST column loading as efficient as possible given the very expensive CST resin. Although there are a variety of tools for predicting chromatographic resin column performance, [1-4], there is a particularly useful method that is suitable as a simple spreadsheet model [4]. This spreadsheet model is an analytical error function for the mass transfer zone (mtz) diffusion width in resin columns and is well-suited for resin breakthrough and column loading. This paper describes just such an error function spreadsheet model and how well the error function agrees with more traditional models and fits the observed small scale breakthrough curves for CST that can then better predict large scale column loading efficiency. The very high sorption of Cs onto CST tends to be slower than that of other lower sorption resins and as a result of the slow CST kinetics, there is also a marked asymmetry in many CST breakthrough curves. The CST breakthrough asymmetry is largely due to the distribution of CST particle sizes because smaller particles sorb much faster than larger particles. It is then the smaller particles that determine the leading mtz at a decontamination factor of 1,000 breakthrough and therefore the decontamination efficiency for a given loading. The larger CST particles correspondingly determine the tailing mtz width and therefore the overall loading efficiency and it is important to model both leading and tailing mtz widths to best optimize CST for a particular Cs-137 decontamination application. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Adsorption kinetics, thermodynamics, and isotherm studies for functionalized lanthanide-chelating resins

Conventional ion exchange resins are widely utilized to remove metals from aqueous solutions, but their limited selectivity precludes dilute ion extraction. This research investigated the adsorption performance of ligand-functionalized resins towards rare earth elements (REE). Functionalized resin particles were synthesized by grafting different ligands (diethylenetriaminepentaacetic dianhydride (DTPADA), phosphonoacetic acid (PAA), or N,N-bis(phosphonomethyl)glycine (BPG)) onto pre-aminated polymeric adsorbents (diameter-0.6 mm). Lanthanide uptake trends were evaluated for the functionalized resins using batch adsorption experiments with a mixture of three REEs (Nd, Gd, and Ho at 0.1–1000 mg/L each). Resin physical-chemical properties were determined by measuring their surface area, ligand concentrations, and acidity constants. The aminated supports contained 4.0 mmol/g primary amines, and ligand densities for the functionalized resins were 0.33 mmol/g (PAA), 0.22 mmol/g (BPG), and 0.42 mmol/g (DTPADA). Kinetic studies revealed that the functionalized resins followed pseudo-second order binding kinetics with rates limited by intraparticle diffusion. Capacity estimates for total REE adsorption based on Langmuir q Max were 0.12 mg/g (amine; ≈ 0.77 µmol/g), 5.0 mg/g (PAA; ≈ 32.16 µmol/g), 3.0 mg/g (BPG; ≈ 19.30 µmol/g), and 2.9 mg/g (DTPADA; ≈ 18.65 µmol/g). Lastly, attaching ligands to the aminated resins greatly improved their REE binding strength and adsorption efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Throughput Screening of 3D Printable Resins: Adjusting the Surface and Catalytic Properties of Multifunctional Architectures

Identification of 3D printable materials is crucial to expand the breadth of physical and chemical properties attainable by additive manufacturing. Stereolithography (SLA), a widespread 3D printing method based on resin photopolymerization, is ideally suited for exploring a large variety of monomers to produce functional three-dimensional solids of diverse properties. However, for most commercial SLA printers, screening monomers and resin compositions requires large volumes (~150 mL) in each printing cycle, making the process costly and inefficient. Herein, a high throughput block (HTB) adaptor was developed to screen arrays of monomers and resin compositions, consuming lower volumes (<2 mL) and less time per print (<1/16 based on a 4 × 4 matrix) than using the original hardware. By use of this approach, a library of materials with different surface hydrophobicities were 3D printed by including long chain acrylates in the resins. In addition, several metal salts were dissolved in an acrylic acid-based resin, 3D printed, and screened as benzyl alcohol oxidation catalysts. Cu(II)-based resins produced the most active structures. Combinations of Cu(II) and long chain acrylate monomers were then used to 3D print complex catalytic architectures with varying degrees of hydrophobicity. Linear relationships were observed between 3D printed surface area, surface hydrophobicity, and catalyst performance. For a high surface Schwarz P topology ca. 60% enhancement in the catalytic activity of Cu(II) was attained by replacing the parent resin with one containing hydrophobic isodecyl groups, indicating that the immediate environment of the catalytic site affected its performance. The HTB enables fast screening of resins for 3D printing multifunctional architectures with intrinsic catalytic activity, tunable surface properties, and minimal waste.

36 MATERIALS SCIENCE↗

Data from Response Surface Methodology Guided Adsorption and Recovery of Free Fatty Acids from Oil Using Resin

The presence of free fatty acids interferes with the conversion of plant oils to biodiesel. Four strong and weak base resins were evaluated for the removal of free fatty acids (FFA) from oil. Amberlite FPA 51 showed the highest adsorption capacity of FFA. A resin concentration above 3% could enable a higher percentage FFA adsorption. The adsorption process fitted a pseudo-first-order kinetic model and achieved equilibrium in approximately 8 h. A full factorial design was used to optimize the resin and FFA concentrations at a fixed temperature (40° C). A ratio of resin to fatty acid concentrations above 1.875 was sufficient for 70% adsorption and the amount adsorbed continued to increase with further added resin. A two-step washing of resin using hexane and ethanol recovered approximately 67.55% ± 4.05% of the initially added fatty acid. The resin that was used was regenerated with 5% NaOH and re-used for a minimum of three consecutive cycles. However, the adsorption capacity diminished to 75% of the initial cycle in cycles 2 and 3. Thus, the work presents a resin-based process for deacidification of oil to reduce fatty acid content of oil for biodiesel production.

Conversion↗