Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “repeatability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Quantum Network Repeater Simulation Package (QNPack) v1.0.0

Existing quantum network testbeds and prototypes are typically implemented in laboratory experiments with limited functionality and operate in a tightly coupled manner. These characteristics make it difficult to evaluate the behavior of emerging quantum platforms and protocols beyond local resource limitations. The QNPack software enables full-stack modeling of quantum repeater networks that allows researchers to simulate new approaches, and understand emergent behaviors, from local to national scales. Novel capabilities include: (1) performant and accurate quantum models that can be executed as independent simulations, which will allow users to characterize specific analog quantum processes, quantum devices, and protocols, (2) a modular and extensible approach to the simulation architecture to accommodate new quantum technologies, protocols, and topologies as they are developed across the quantum repeater generations under evaluation, and (3) a focus on managing the interactions between the simulation framework sub-components so that they may be re-used and composed in flexible ways.

Kissel, Ezra [Lawrence Berkeley National Laborator↗
DOE OSTI2023

Low-velocity repeated impact behaviors of Polymer Fiber Reinforced Plastics (PFRPs)

Modern fiber-reinforced composites have become ubiquitous across multiple industries due to their excellent weight-to-strength ratio. Typically glass or carbon fibers are widely used. While Glass or Carbon Fiber-Reinforced Plastics (GFPRs or CFPRs) have good stiffness, strength, and fatigue life, they are expensive and difficult to recycle. Researchers are exploring Polymer Fiber-Reinforced Plastics (PFRPs) as an alternative solution. PFRPs utilize polymer fibers and a polymer matrix. A wide range of materials options is available, including low-cost thermoplastics such as polyethylene or polypropylene. These thermoplastics are easy to handle and recyclable without special methods. Manufacturing parts using thermoplastics are well-established as well. However, their mechanical performances have not been extensively studied compared to GFRPs or CFRPs. This study examines the low-velocity impact resistance of PFRPs made of different thermoplastics. The low-velocity impacts are applied through a drop-weight tower. The experiment is divided into two cases: a single perforation impact and low-energy repeated impacts. Energy absorption and the number of impacts to failure are measured. The results are compared to traditional CFRPs which have a thermoset matrix. The PFRPs demonstrate energy absorption capabilities comparable to or greater than those of CFRPs with respect to specimen thickness and density. Additionally, the PFRPs show significantly higher impacts-to-failure than the CFRPs in low-energy repeated impact tests. This is particularly noteworthy considering that the PFRPs are much simpler and more economical to manufacture than CFRPs. To further

Ko, Seunghyun↗
DOE OSTI2023

Tandem repeats in giant archaeal Borg elements undergo rapid evolution and create new intrinsically disordered regions in proteins

Borgs are huge, linear extrachromosomal elements associated with anaerobic methane-oxidizing archaea. Striking features of Borg genomes are pervasive tandem direct repeat (TR) regions. Here, we present six new Borg genomes and investigate the characteristics of TRs in all ten complete Borg genomes. We find that TR regions are rapidly evolving, recently formed, arise independently, and are virtually absent in host Methanoperedens genomes. Flanking partial repeats and A-enriched character constrain the TR formation mechanism. TRs can be in intergenic regions, where they might serve as regulatory RNAs, or in open reading frames (ORFs). TRs in ORFs are under very strong selective pressure, leading to perfect amino acid TRs (aaTRs) that are commonly intrinsically disordered regions. Proteins with aaTRs are often extracellular or membrane proteins, and functionally similar or homologous proteins often have aaTRs composed of the same amino acids. We propose that Borg aaTR-proteins functionally diversify Methanoperedens and all TRs are crucial for specific Borg–host associations and possibly cospeciation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Structure-aware annotation of leucine-rich repeat domains

Protein domain annotation is typically done by predictive models such as HMMs trained on sequence motifs. However, sequence-based annotation methods are prone to error, particularly in calling domain boundaries and motifs within them. These methods are limited by a lack of structural information accessible to the model. With the advent of deep learning-based protein structure prediction, existing sequenced-based domain annotation methods can be improved by taking into account the geometry of protein structures. We develop dimensionality reduction methods to annotate repeat units of the Leucine Rich Repeat solenoid domain. The methods are able to correct mistakes made by existing machine learning-based annotation tools and enable the automated detection of hairpin loops and structural anomalies in the solenoid. The methods are applied to 127 predicted structures of LRR-containing intracellular innate immune proteins in the model plant Arabidopsis thaliana and validated against a benchmark dataset of 172 manually-annotated LRR domains.

Xu, Boyan↗
DOE OSTI2021

The leucine-rich repeats in allelic barley MLA immune receptors define specificity towards sequence-unrelated powdery mildew avirulence effectors with a predicted common RNase-like fold

Nucleotide-binding domain leucine-rich repeat-containing receptors (NLRs) in plants can detect avirulence (AVR) effectors of pathogenic microbes. The Mildew locus a (Mla) NLR gene has been shown to confer resistance against diverse fungal pathogens in cereal crops. In barley, Mla has undergone allelic diversification in the host population and confers isolate-specific immunity against the powdery mildew-causing fungal pathogen Blumeria graminis forma specialis hordei (Bgh). We previously isolated the Bgh effectors AVR A1 , AVR A7 , AVR A9 , AVR A13 , and allelic AVR A10 /AVR A22 , which are recognized by matching MLA1, MLA7, MLA9, MLA13, MLA10 and MLA22, respectively. Here, we extend our knowledge of the Bgh effector repertoire by isolating the AVR A6 effector, which belongs to the family of catalytically inactive RNase-Like Proteins expressed in Haustoria (RALPHs). Using structural prediction, we also identified RNase-like folds in AVR A1 , AVR A7 , AVR A10 /AVR A22 , and AVR A13 , suggesting that allelic MLA recognition specificities could detect structurally related avirulence effectors. To better understand the mechanism underlying the recognition of effectors by MLAs, we deployed chimeric MLA1 and MLA6, as well as chimeric MLA10 and MLA22 receptors in plant co-expression assays, which showed that the recognition specificity for AVR A1 and AVR A6 as well as allelic AVR A10 and AVR A22 is largely determined by the receptors’ C-terminal leucine-rich repeats (LRRs). The design of avirulence effector hybrids allowed us to identify four specific AVR A10 and five specific AVR A22 aa residues that are necessary to confer MLA10- and MLA22-specific recognition, respectively. This suggests that the MLA LRR mediates isolate-specific recognition of structurally related AVR A effectors. Thus, functional diversification of multi-allelic MLA receptors may be driven by a common structural effector scaffold, which could be facilitated by proliferation of the RALPH effector family in the pathogen genome.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Improving Self-Driving Labs: Quantifying System-Level Experiment Repeatability and Broadening Instrument-Level Compatibility

Modular Autonomous Research System (MARS) is a self-driving laboratory (SDL) which performs wet-lab science with peptide-lanthanide combinations in an automated and, ultimately, an autonomous manner to aid in soil analysis for domestic lithium mining. Autonomous experimentation involves automated experimentation, experiment planning, and active learning. MARS consists of a 6-axis robotic arm (UR5e) on a linear rail, pipette robots (Opentrons 2), and microplate readers. These components transport, operate on, and collect data with chemical solutions in standard labware. For effective autonomy, MARS must perform system-level labware operations repeatably, plan experiments autonomously, and be portable between research-domains. Repeatability is evaluated by labware placement precision, such that future operations can properly locate labware, as well as the elapsed time, so that low variance mean estimates of experiment duration can inform high-level researcher decision making. Autonomous experiment planning is the next step to decouple experimentation from human management; however, there is a conflict between the ideal system-level experiment goals and the constraints imposed by instruments’ limitations. Sub-domain portability is a long-term goal to extend MARS’ research beyond the chemistry of peptide-lanthanide binding to other sub-domains without having to invest significant overhead to system retrofitting. To address these goals, we manually trained the robotic arm labware placement and modelled statistical failurerate and uncertainty Additionally, we benchmarked the duration and variance of each experiment sub-operation as a heuristic for research decision making. Next, we use a parameterized geometric program (PGP) approach to design experiments that optimize system-level objectives and satisfy instrument-level constraints. Lastly, we proposed a Python framework to maximize MARS’ extensibility to other scientific sub-domains through a JSON-based experiment specification.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Row selection in remote sensing from four-row plots of maize and sorghum based on repeatability and predictive modeling

Remote sensing enables the rapid assessment of many traits that provide valuable information to plant breeders throughout the growing season to improve genetic gain. These traits are often extracted from remote sensing data on a row segment (rows within a plot) basis enabling the quantitative assessment of any row-wise subset of plants in a plot, rather than a few individual representative plants, as is commonly done in field-based phenotyping. Nevertheless, which rows to include in analysis is still a matter of debate. The objective of this experiment was to evaluate row selection and plot trimming in field trials conducted using four-row plots with remote sensing traits extracted from RGB (red-green-blue), LiDAR (light detection and ranging), and VNIR (visible near infrared) hyperspectral data. Uncrewed aerial vehicle flights were conducted throughout the growing seasons of 2018 to 2021 with data collected on three years of a sorghum experiment and two years of a maize experiment. Traits were extracted from each plot based on all four row segments (RS) (RS1234), inner rows (RS23), outer rows (RS14), and individual rows (RS1, RS2, RS3, and RS4). Plot end trimming of 40 cm was an additional factor tested. Repeatability and predictive modeling of end-season yield were used to evaluate performance of these methodologies. Plot trimming was never shown to result in significantly different outcomes from non-trimmed plots. Significant differences were often observed based on differences in row selection. Plots with more row segments were often favorable for increasing repeatability, and excluding outer rows improved predictive modeling. These results support long-standing principles of experimental design in agronomy and should be considered in breeding programs that incorporate remote sensing.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1973

Multiple-beam satellite repeater tradeoffs applied to a multifunctional system.

This paper concerns satellite repeater tradeoffs for a multiple-beam, multiple-channel, multiple-connectivity satellite postulated to serve a diversity of domestic U.S. noncommercial requirements, with a substantial portion of the satellite power, weight, and bandwidth dedicated to video distribution and bradcast. The orders-of-magnitude of the requirements are given for the video plus high-rate data traffic category. The designs of two alternative baseline repeater configurations are presented, and estimates of their weight and their prime power consumption are given. These data are the basis for estimating the weight and power consumption of a range of alternative beam coverage, modulation, and channel capacity systems. These estimates are used to illustrate tradeoffs with different performance criteria as the independent variable: number of channels per beam and total number of beam-channels.

Kinal, G. V.↗
NASA NTRS1973

Repeatability of elevation measurements: Apollo photography

Sun elevation angle effects on repeatability, using Apollo 15 photographs are analyzed and results extended to slope related effects. Preliminary results indicate repeatibility of elevation measurement is related to contrast in the stereoscopic image.

Wu, S. S. C.↗
NASA NTRS1980

Evaluation of pulsed RFI effects on digital satellite repeaters

This paper presents an analytical approach for assessing the effect of pulsed RFI on the error probability of a coherent phase-shift keyed signal through a nonlinear satellite repeater. The RFI is assumed to affect the uplink channel and to consist of CW pulses with random power levels and arriving randomly in time with a Poisson distribution. A model to approximate the effect of intermodulation products is introduced and the error probability conditioned on the output of the satellite repeater is computed. The classical moment technique is then used as an efficient method of averaging the conditional error probability over the numerous random parameters associated with the uplink signal.

Huang, T. C.↗
NASA NTRS1982

Spatial resolution and repeatability of Magsat crustal anomaly data over the Indian Ocean

Preliminary results from analysis of individual Magsat tracks in the eastern Indian Ocean demonstrate the resolution capability and repeatability of these data. Spectrum analysis indicates that 250 km is the absolute lower limit for resolving crustal magnetic anomalies in Magsat along-track data. Spectral coherence analysis of closely-spaced tracks shows that magnetic anomaly features with wavelengths greater than 700 km are highly repeatable from track to track.

Sailor, R. V.↗
NASA NTRS1982

Packet communication system for a multi-beam beam switched satellite repeater

This paper presents the design of a packet-switched communication system using a multi-beam, beam switched satellite repeater. The protocol provides a combination of random access via Slotted ALOHA techniques and demand assigned access using collision requests. This allows efficient bandwidth usage and low average delays. Minimization of earth station cost was a major objective. This was achieved by transferring the bulk of the system complexity to the satellite repeater and the (ground) network controller. This centrally controlled protocol would allow greater system stability and would permit system reconfiguration in response to changes in traffic intensity. Sufficient signalling is also incorporated to allow both rate diversity to combat fading and timing corrections to account for satellite drift.

Bose, S. K.↗
NASA NTRS1983

Positional repeatability measurements of stepper motors at cryogenic temperatures

For cryogenically-cooled infrared instruments and telescopes employed in space, reliable and predictable motor operations at 4 K in vacuum are in most cases necessary. For the Shuttle Infrared Telescope Facility (SIRTF), stepper motors may be employed in a number of applications. A test facility was designed and built for measuring stepper motor positional repeatability, in vacuum, over a temperature range from ambient to liquid helium temperature. Tests regarding positional repeatability were conducted at different motor speeds, directions of motor rotation, step sizes, and power conditions. In addition, tests were performed with respect to the ability of the motor to remain in a position with no power applied to the motor.

Pompea, S. M.↗
NASA NTRS1985

Repeatable electrical measurement instrumentation for use in the accelerated stress testing of thin film solar cells

Attention is given to the construction, calibration, and performance of a repeatable measurement system for use in conjunction with the accelerated stress testing of a-Si:H cells. A filtered diode array is utilized to approximate the spectral response of any type of solar cell in discrete portions of the spectrum. It is noted that in order to achieve the necessary degree of overall repeatability, it is necessary to pay particular attention to methods of contacting and positioning the cells.

Davis, C. W.↗
NASA NTRS1988

Topex orbit determination and gravity recovery using GPS data from repeat orbits

A covariance analysis is presented for a differential GPS-based technique for satellite tracking and gravity recovery to be demonstrated on Topex in the early 1990's. The technique employs data from an ensemble of repeat ground tracks to recover a unique satellite epoch state for each track and a set of invariant local gravity parameters common to all tracks. For satellites above about 800 km altitude, where gravity modeling is the dominant systematic error, averaging of random error over many arcs and adjustment of the gravity model reduces the final satellite position error. The local gravity parameters can then be used to produce a refined global gravity model. The analysis indicates that errors ranging from 5 to 8 cm in Topex altitude and 0.05 to 0.2 mgal for the gravity field can be achieved, depending on the number of repeat arcs used.

Wu, Jiun-Tsong↗
NASA NTRS1988

The strength of laminated composite materials under repeated impact loading

When low velocity and energy impact is exerted on a laminated composite material, in a perpendicular direction to the plane of the laminate, invisible damage may develop. It is shown analytically and experimentally that the invisible damage occurs during the first stage of contact between the impactor and the laminate and is a result of the contact stresses. However, the residual flexural strength changes only slightly, because it depends mainly on the outer layers, and these remain undamaged. Repeated impact intensifies the damage inside the laminate and causes larger bending under equivalent impact load. Finally, when the damage is most severe, even though it is still invisible, the laminate fails because of bending on the tension side. If the repeated impact is halted before final fracture occurs the residual strength and modulus would decrease by a certain amount.

Rotem, Assa↗
NASA NTRS1989

Eigenvector derivatives of repeated eigenvalues using singular value decomposition

An explicit formula is obtained for the first-order eigenvector derivative that corresponds to the eigenvector of a repeated eigenvalue, in the case of the nonself-adjoint eigenvalue problem. This method applies to the class of nondefective problems whose first eigenvalue derivatives of the repeated eigenvalues are distinct. A singular-value decomposition approach is used to compute four requisite bases for eigenspaces, as well as to keep track of the dimensions of state variables and the conditioning of the state equations.

Lim, Kyong B.↗
NASA NTRS1990

The inclusion of higher degree and order gravity terms in the design of a repeat ground track orbit

Mean Orbit Elements can be chosen such that a desired ground track repeat criteria is obtained when propagating with the secular effects of a central body gravity field. If the proper initial conditions are chosen that correspond to these Mean Elements, the orbit can also be propagated with the full gravity field and form another ground track repeat pattern. Further, if the effects of other perturbative forces are compensated for, such that the ground track remains near this pattern, the central body effects can again be considered repetitive. The process of arriving at these conclusions, along with the supporting numerical simulations, are presented.

Vincent, Mark A.↗