Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regional models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Evaluation of the Regional Atmospheric Modeling System in the Eastern Range Dispersion Assessment System

The Applied Meteorology Unit is conducting an evaluation of the Regional Atmospheric Modeling System (RAMS) contained within the Eastern Range Dispersion Assessment System (ERDAS). ERDAS provides emergency response guidance for operations at the Cape Canaveral Air Force Station and the Kennedy Space Center in the event of an accidental hazardous material release or aborted vehicle launch. The prognostic data from RAMS is available to ERDAS for display and is used to initialize the 45th Range Safety (45 SW/SE) dispersion model. Thus, the accuracy of the 45 SW/SE dispersion model is dependent upon the accuracy of RAMS forecasts. The RAMS evaluation task consists of an objective and subjective component for the Florida warm and cool seasons of 1999-2000. The objective evaluation includes gridded and point error statistics at surface and upper-level observational sites, a comparison of the model errors to a coarser grid configuration of RAMS, and a benchmark of RAMS against the widely accepted Eta model. The warm-season subjective evaluation involves a verification of the onset and movement of the Florida east coast sea breeze and RAMS forecast precipitation. This interim report provides a summary of the RAMS objective and subjective evaluation for the 1999 Florida warm season only.

Case, Jonathan↗

Photodissociation regions. I - Basic model. II - A model for the Orion photodissociation region

A theoretical parameter study of the temperature and chemical structure of dense photodissociation regions and their resultant spectrum is presented. Models are discussed which are relevant not only to the dust and gas between molecular clouds and H II regions, but also apply to any neutral cloud illuminated by intense FUV fluxes. The models relate observed line and continuum emission from these regions to physical parameters such as the gas density and temperature, the elemental and chemical abundances, the local radiation field, and the grain properties. The results are applied to observational data from the OMC-1 region. The model shows that the observed high brightness temperature of the C I 609 microns line can be explained by emission from the C(+)/C/CO transition region. This difference with previous chemical models is due to a higher gas phase elemental abundance of carbon, to the charge exchange reactions of C(+) with S and SiO, and to carbon self-shielding.

Tielens, A. G. G. M.↗

A New Regional Climate Model for POLAR‐CORDEX: Evaluation of a 30‐Year Hindcast with COSMO‐CLM^2 Over Antarctica

Continent‐wide climate information over the Antarctic Ice Sheet (AIS) is important to obtain accurate information of present climate and reduce uncertainties of the ice sheet mass balance response and resulting global sea level rise to future climate change. In this study, the COSMO‐CLM^2 Regional Climate Model is applied over the AIS and adapted for the specific meteorological and climatological conditions of the region. A 30‐year hindcast was performed and evaluated against observational records consisting of long‐term ground‐based meteorological observations, automatic weather stations, radiosoundings, satellite records, stake measurements and ice cores. Reasonable agreement regarding the surface and upper‐air climate is achieved by the COSMO‐CLM^2 model, comparable to the performance of other state‐of‐the‐art climate models over the AIS. Meteorological variability of the surface climate is adequately simulated, and biases in the radiation and surface mass balance are small. The presented model therefore contributes as a new member to the COordinated Regional Downscaling EXperiment project over the AIS (POLAR‐CORDEX) and the CORDEX‐CORE initiative.

Antarctica↗

The Regional Aerosol Model Intercomparison Project (RAMIP)

Changes in anthropogenic aerosol emissions have strongly contributed to global and regional trends in temperature, precipitation, and other climate characteristics and have been one of the dominant drivers of decadal trends in Asian and African precipitation. These and other influences on regional climate from changes in aerosol emissions are expected to continue and potentially strengthen in the coming decades. However, a combination of large uncertainties in emission pathways, radiative forcing, and the dynamical response to forcing makes anthropogenic aerosol a key factor in the spread of near-term climate projections, particularly on regional scales, and therefore an important one to constrain. For example, in terms of future emission pathways, the uncertainty in future global aerosol and precursor gas emissions by 2050 is as large as the total increase in emissions since 1850. In terms of aerosol effective radiative forcing, which remains the largest source of uncertainty in future climate change projections, CMIP6 models span a factor of 5, from −0.3 to −1.5 W m−2. Both of these sources of uncertainty are exacerbated on regional scales. The Regional Aerosol Model Intercomparison Project (RAMIP) will deliver experiments designed to quantify the role of regional aerosol emissions changes in near-term projections. This is unlike any prior MIP, where the focus has been on changes in global emissions and/or very idealised aerosol experiments. Perturbing regional emissions makes RAMIP novel from a scientific standpoint and links the intended analyses more directly to mitigation and adaptation policy issues. From a science perspective, there is limited information on how realistic regional aerosol emissions impact local as well as remote climate conditions. Here, RAMIP will enable an evaluation of the full range of potential influences of realistic and regionally varied aerosol emission changes on near-future climate. From the policy perspective, RAMIP addresses the burning question of how local and remote decisions affecting emissions of aerosols influence climate change in any given region. Here, RAMIP will provide the information needed to make direct links between regional climate policies and regional climate change. RAMIP experiments are designed to explore sensitivities to aerosol type and location and provide improved constraints on uncertainties driven by aerosol radiative forcing and the dynamical response to aerosol changes. The core experiments will assess the effects of differences in future global and regional (Africa and the Middle East, East Asia, North America and Europe, and South Asia) aerosol emission trajectories through 2051, while optional experiments will test the nonlinear effects of varying emission locations and aerosol types along this future trajectory. All experiments are based on the shared socioeconomic pathways and are intended to be performed with 6th Climate Model Intercomparison Project (CMIP6) generation models, initialised from the CMIP6 historical experiments, to facilitate comparisons with existing projections. Requested outputs will enable the analysis of the role of aerosol in near-future changes in, for example, temperature and precipitation means and extremes, storms, and air quality.

anthropogenic aerosol emissions↗

Radiative dominated cooling of the flare corona and transition region

Models in which radiation dominates cooling flare loops are investigated. The radiative models are found to predict a differential emission measure (Q) proportional to T to the (l+1) power, where l measures the dependence of the radiative loss coefficient on temperature, lamda (T) approximately T to the (-l) power. It is concluded that the radiative models are incapable of explaining the observed temperature dependence of Q for flare coronal and transitional plasma. The models suggest that large mass motions (velocities of the order of the sound speed) may be required.

Antiochos, S. K.↗

Outer atmospheres of cool stars. XIV - A model for the chromosphere and transition region of Beta Ceti (G9.5 III)

In the present chromospheric and transition region model for Beta Ceti, which is consistent with IUE spectra of the Mg II, C II, and C IV resonance lines, the Mg II h and k lines are treated in partial redistribution and the C II and C IV lines in complete redistribution. Computed line fluxes are presented for a range of models to show the range of permitted temperature structures. A comparison of the Beta Ceti model to models previously computed in a similar way for other stars shows a trend of decreasing chromospheric pressures and increasing geometric scales as single stars evolve across the transition region boundary. The present analysis also suggests that transition region pressures drastically decrease and geometric scales rapidly increase as single giant stars evolve to the right, toward the boudnary. Beta Ceti's exceptional X-ray brightness is discussed.

Eriksson, K.↗

A model of regional primary production for use with coarse resolution satellite data

A model of crop primary production, which was originally developed to relate the amount of absorbed photosynthetically active radiation (APAR) to net production in field studies, is discussed in the context of coarse resolution regional remote sensing of primary production. The model depends on an approximately linear relationship between APAR and the normalized difference vegetation index. A more comprehensive form of the conventional model is shown to be necessary when different physiological types of plants or heterogeneous vegetation types occur within the study area. The predicted variable in the new model is total assimilation (net production plus respiration) rather than net production alone or harvest yield.

Prince, S. D.↗

S-2 stage 1/25 scale model base region thermal environment test. Volume 1: Test results, comparison with theory and flight data

A 1/25 scale model S-2 stage base region thermal environment test is presented. Analytical results are included which reflect the effect of engine operating conditions, model scale, turbo-pump exhaust gas injection on base region thermal environment. Comparisons are made between full scale flight data, model test data, and analytical results. The report is prepared in two volumes. The description of analytical predictions and comparisons with flight data are presented. Tabulation of the test data is provided.

Sadunas, J. A.↗

Developing the Next Generation of Active Region Evolution Models

We recently began development work on an integrated suite of models for slowly evolving solar active regions. In this presentation I will describe the design of this suite, highlight the challenges which this presents and discuss the implications of this design for the CCMC, to which a functional beta test version is to be delivered in three years.

MacNeice, P. J.↗

A computationally efficient statistically downscaled 100 m resolution Greenland product from the regional climate model MAR

The Greenland Ice Sheet (GrIS) has been contributing directly to sea level rise, and this contribution is projected to accelerate over the next decades. A crucial tool for studying the evolution of surface mass loss (e.g., surface mass balance, SMB) consists of regional climate models (RCMs), which can provide current estimates and future projections of sea level rise associated with such losses. However, one of the main limitations of RCMs is the relatively coarse horizontal spatial resolution at which outputs are currently generated. Here, we report results concerning the statistical downscaling of the SMB modeled by the Modèle Atmosphérique Régional (MAR) RCM from the original spatial resolution of 6 km to 100 m building on the relationship between elevation and mass losses in Greenland. To this goal, we developed a geospatial framework that allows the parallelization of the downscaling process, a crucial aspect to increase the computational efficiency of the algorithm. Using the results obtained in the case of the SMB, surface and air temperature are assessed through the comparison of the modeled outputs with in situ and satellite measurement. The downscaled products show a considerable improvement in the case of the downscaled product with respect to the original coarse output, with the coefficient of determination (R 2 ) increasing from 0.868 for the original MAR output to 0.935 for the SMB downscaled product. Moreover, the value of the slope and intercept of the linear regression fitting modeled and measured SMB values shifts from 0.865 for the original MAR to 1.015 for the downscaled product in the case of the slope and from the value −235 mm w.e. yr -1 (original) to −57 mm w.e. yr -1 (downscaled) in the case of the intercept, considerably improving upon results previously published in the literature.

Greenland Ice Sheet↗

Modeled F region response to auroral dynamics based upon Dynamics Explorer auroral observations

Auroral images from the Dynamics Explorer 1 (DE 1) scanning auroral imager have been combined with in situ auroral precipitation data from the DE 2 low-altitude plasma instrument, to form a time-dependent global auroral energy flux model. This model has both good time (12 min) and spatial (100 km) resolution compared to that currently available for global-scale ionospheric and thermospheric modeling. The development and comparison of this model with others are discussed. Data from an aurorally active period, November 25, 1981, are presented and used as a case study for this model. Using a global ionospheric model, the effect of the DE auroral model is contrasted with that of a conventional empirical auroral energy flux model. Major differences in the modeled F region ionosphere are predicted from this comparative study.

Sojka, J. J.↗

Interactions Between Asian Air Pollution and Monsoon System: South Asia (ROSES-2014 ACMAP)

Asia's rapid economic growth over the past several decades has brought a remarkable increase in air pollution levels in that region. High concentrations of aerosols (also known as particulate matter or PM) from pollution sources pose major health hazards to half of the world population in Asia including South Asia. How do pollution and dust aerosols regulate the monsoon circulation and rainfall via scattering and absorbing solar radiation, changing the atmospheric heating rates, and modifying the cloud properties? We conducted a series of regional model experiments with NASA-Unified Weather Research and Forecast (NUWRF) regional model with coupled aerosol-chemistry-radiation-microphysics processes over South Asia for winter, pre-monsoon, and monsoon seasons to address this question. This study investigates the worsening air quality problem in South Asia by focusing on the interactions between pollution and South Asian monsoon, not merely focusing on the increase of pollutant emissions.

regional model experiments with NASA-Unified Weath↗

Evaluating a Regional Climate Model Simulation of Greenland Ice Sheet Snow and Firn Density for Improved Surface Mass Balance Estimates

Modeling vertical profiles of snow and firn density near the surface of the Greenland ice sheet (GrIS) is key to estimating GrIS mass balance, and by extension, global sea level change. To understand sources of error in simulated GrIS density, we compare GrIS density profiles from a leading regional climate model with coincident in situ measurements. We identify key contributors to model density and mass balance biases, including underestimated simulated fresh snow density (which leads to underestimation of density in the top 1 m of snow by ~10%). In areas undergoing frequent melting, positive density biases (of 7% in the top 1 m, and 10% between 1 and 10 m) are likely associated with errors in representing meltwater production, retention and refreezing. The results highlight the importance of accurately capturing fresh snow density and meltwater processes in models used to estimate GrIS mass balance change.

P M Alexander↗

Seasonal Monitoring of Melt and Accumulation Within the Deep Percolation Zone of the Greenland Ice Sheet and Comparison with Simulations of Regional Climate Modeling

Increasing melt over the Greenland Ice Sheet (GrIS) recorded over the past several years has resulted in significant changes of the percolation regime of the ice sheet. It remains unclear whether Greenland's percolation zone will act as a meltwater buffer in the near future through gradually filling all pore space or if near-surface refreezing causes the formation of impermeable layers, which provoke lateral runoff. Homogeneous ice layers within perennial firn, as well as near-surface ice layers of several meter thickness have been observed in firn cores. Because firn coring is a destructive method, deriving stratigraphic changes in firn and allocation of summer melt events is challenging. To overcome this deficit and provide continuous data for model evaluations on snow and firn density, temporal changes in liquid water content and depths of water infiltration, we installed an upward-looking radar system (upGPR) 3.4 m below the snow surface in May 2016 close to Camp Raven (66.4779 deg N, 46.2856 deg W) at 2120 m a.s.l. The radar is capable of quasi-continuously monitoring changes in snow and firn stratigraphy, which occur above the antennas. For summer 2016, we observed four major melt events, which routed liquid water into various depths beneath the surface. The last event in mid-August resulted in the deepest percolation down to about 2.3 m beneath the surface. Comparisons with simulations from the regional climate model MAR are in very good agreement in terms of seasonal changes in accumulation and timing of onset of melt. However, neither bulk density of near-surface layers nor the amounts of liquid water and percolation depths predicted by MAR correspond with upGPR data. Radar data and records of a nearby thermistor string, in contrast, matched very well for both timing and depth of temperature changes and observed water percolations. All four melt events transferred a cumulative mass of 56 kg/(sq. m) into firn beneath the summer surface of 2015. We find that continuous observations of liquid water content, percolation depths and rates for the seasonal mass fluxes are sufficiently accurate to provide valuable information for validation of model approaches and help to develop a better understanding of liquid water retention and percolation in perennial firn.

Heilig, Achim↗

Using a Genetic Algorithm to Model Broadband Regional Waveforms for Crustal Structure in the Western United States

In this study, we analyze regional seismograms to obtain the crustal structure in the eastern Great Basin and western Colorado plateau. Adopting a for- ward-modeling approach, we develop a genetic algorithm (GA) based parameter search technique to constrain the one-dimensional crustal structure in these regions. The data are broadband three-component seismograms recorded at the 1994-95 IRIS PASSCAL Colorado Plateau to Great Basin experiment (CPGB) stations and supplemented by data from U.S. National Seismic Network (USNSN) stations in Utah and Nevada. We use the southwestern Wyoming mine collapse event (M(sub b) = 5.2) that occurred on 3 February 1995 as the seismic source. We model the regional seismograms using a four-layer crustal model with constant layer parameters. Timing of teleseismic receiver functions at CPGB stations are added as an additional constraint in the modeling. GA allows us to efficiently search the model space. A carefully chosen fitness function and a windowing scheme are added to the algorithm to prevent search stagnation. The technique is tested with synthetic data, both with and without random Gaussian noise added to it. Several separate model searches are carried out to estimate the variability of the model parameters. The average Colorado plateau crustal structure is characterized by a 40-km-thick crust with velocity increases at depths of about 10 and 25 km and a fast lower crust while the Great Basin has approximately 35- km-thick crust and a 2.9-km-thick sedimentary layer.

Bhattacharyya, Joydeep↗

The utilization of Seasat-A data in numerical weather prediction

The present paper provides the results from several numerical experiments which have been conducted in cases in which SASS (Seasat-A Satellite Scatterometer) winds were either included or excluded. Global scale experiments are discussed along with a regional area model. The regional model is essentially that described by Duffy (1981). A description of the initial conditions used in the regional model experiment is also provided. It is found that Seasat-A data can be important in defining the initial conditions which results in rapid maritime cyclogenesis. Currently conducted work is concerned with the development of a higher horizontal and vertical resolution global model, with an improved planetary boundary layer parameterization.

Duffy, D. G.↗

Simulation and Scaling of the Turbulent Vertical Heat Transport and Deep-Cycle Turbulence Across the Equatorial Pacific Cold Tongue

Microstructure observations in the Pacific cold tongue reveal that strong turbulence often penetrates into the thermocline producing hundreds of W/m2 of downward heat transport during nighttime and early morning. However, virtually all observations of this deep-cycle turbulence (DCT) are from 0◦N,140◦W. Here, a hierarchy of ocean process simulations including submesoscale-permitting regional models and turbulence-permitting large eddy simulations (LES) embedded in a regional model provide insight into DCT at and beyond 0◦N,140◦W. A regional hindcast quantifies the spatio-temporal variability of subsurface turbulent heat fluxes throughout the cold tongue from 1999-2016. Climatologically, the mean heat flux is strongest (∼100W/m2) within2◦ of the equator. The heat flux is slightly (∼10 W/m2) stronger in the northern than southern hemisphere throughout the cold tongue. The seasonal cycle of the heat flux, which is not everywhere aligned with the surface flux, ranges from 150 W/m2 near the equator to 30 W/m2 and 10 W/m2 at 4◦N and S respectively. Aseasonal variability of turbulent heat fluxes is logarithmically distributed and temporally uncorrelated with surface heat fluxes. The aseasonal variability of turbulence is highlighted in 34-day LES of Boreal autumn at 0◦N and 3◦N,140◦W. Intense DCT occurs frequently above the undercurrent at 0◦N and intermittently at 3◦N. Daily-mean heat fluxes scale with the bulk vertical shear and the wind stress, which together explain ∼90% of the daily variance across both LES. Observational validation of the scaling at 0◦N,140◦W is encouraging, but observations beyond 0◦N,140◦W can facilitate needed refinement of mixing parameterization in ocean models.

Simulation↗

Tidal simulation using regional ocean modeling systems (ROMS)

The purpose of our research is to test the capability of ROMS in simulating tides. The research also serves as a necessary exercise to implement tides in an operational ocean forecasting system. In this paper, we emphasize the validation of the model tide simulation. The characteristics and energetics of tides of the region will be reported in separate publications.

tide modeling↗