Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “postdoc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Student Support for the “Frontiers in Attosecond & Ultrafast X-ray Science” School

The new millennium witnessed two revolutionary breakthroughs in ultrafast x-ray science: table-top XUV sources based on high harmonic generation in gases ushered in the attosecond era while facility-based x-ray free-electron lasers opened the path for intense, femtosecond hard x-rays. This award requested scholarship funds for a 2019 and 2023 School whose prime objective was the training of young scientists in these emerging complementary areas both relevant to DOE BES mission. The school entitled the “Frontiers of Attosecond and Ultrafast X-ray Science (FAXS)” (http://www.erice-attosecond.it/) was the second and fourth in a series, which began in 2017. The two Schools were held during March 10-16, 2019 and March 26-31, 2023 at the Ettore Majorana Foundation and Centre for Scientific Culture (http://www.ccsem.infn.it/) in Erice, Sicily. The DOE funds supported the registration fee for young scientists (graduate students and postdocs) from US institutions. The registration fees included School participation, lodging and meals over the duration of the School. Note, the third addition of the School was held in 2022 as a virtual event due to the pandemic, DOE funds were not necessary for this event. The FAXS School is a course of the 62th and 63rd International School of Quantum Electronics under the directorship of Prof. Diederik Wiersma (University of Florence). The Directors for the FAXS School are Louis DiMauro (The Ohio State University, USA) and Mauro Nisoli (Politecnico di Milano, Italy). The FAXS School program consisted of approximately 10 lectures by leading experts in attosecond and x-ray science (see attached list). Most lecturers delivered a series of three 1-hour lectures. The lecturers were required to spend the full 5 days at the school so to promote interaction with the students. The Erice Majorana Center venue accommodated ~75 young scientists. The registration fee covered the cost of participating in the school, lodging and meals for the entire duration of the school. The schedule consisted of lectures every morning and afternoon except for one afternoon that was reserved for an archaeological excursion. Every evening had a student/postdoc poster session and social gatherings at the Majorana Center to encourage further interaction of all participants and lecturers. The two FAXS Schools attracted an international group of young scientists. The DOE funds supported the registration fee for 11 students/postdocs from US institutions (5 supported in 2019 and 6 supported in 2023). The management of the DOE fellowships were administered through the Research Foundation of The Ohio State University. FAXS scholarships for European students/postdocs were provided by European funding sources administered by co-Director, Prof. Nisoli. All students/postdocs were encouraged to present a poster. Travel expenses to the FAXS School were the responsibility of the student/postdoc home institution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Technical Report on the Belle II Summer Workshop and Explorer Workshop 2023

The 2023 Belle II Summer workshop took place July 24-28, 2023 at Duke University in Durham. The meeting webpage can be found at https://indico.belle2.org/event/8841/. The meeting had 58 registered participants with the overwhelming majority attending in person. The event at giving beginning graduate students and postdocs an overview over the Belle II physics program and detector as well as an in-depth exploration of the Belle II software. For the latter, several hands-on sessions were organized to introduce participants to the Belle II software as well as more specialized topics in statistics and Machine Learning. The workshop also featured an ML/AI competition. In addition to the DOE support, the workshop was also supported by the Duke Physics department. We were able to host almost all students that so wished in the Duke Dorms and provide a meal plan. The support enabled us to waive the registration fee for all participants and cover also part of the dorm costs. Furthermore, we covered travel costs for external speakers on ML/AI topics. Figures 1 and 2 show the group picture and a scene from the hands-on sessions, respectively.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Mapping Dark Matter on Small Scales with the Cosmic Microwave Background (Final Report)

Sehgal was funded by DOE Grant DE-SC0020441 over the period from 11/1/2019 - 04/30/2024 (no remaining funds are anticipated). Most recently, Sehgal and her group completed a publication forecasting cosmological parameter constraints for a CMB-HD survey, in addition to SO and CMB-S4 (1). One focus of this work was determining the improvement in parameter constraints when removing the gravitational lensing effect from the primordial CMB (a process called delensing). This work also explored the bias to parameters from neglecting baryonic effects, and ways to mitigate that. In addition, this work highlighted that a CMB-HD N eff measurement could tightly constrain the QCD axion in a modelindependent way (see left panel of Figure 1). Sehgal also developed a novel way to probe inflation via CMB experiments by measuring inflationary magnetic fields (IMFs) (2). IMFs are thought to seed the large magnetic fields we observe in galaxies today, and can be measured by looking for anisotropic rotation of the CMB polarization vectors across the sky (an effect called cosmic birefringence). The cosmic birefringence from IMFs has a unique frequency dependence, allowing it to be separated from other sources of cosmic birefringence. In (2), Sehgal and her postdoc also presented a novel way to remove foreground contamination from Galactic magnetic fields using measurements of the polarization of nearby radio sources. The removal of this Galactic contamination is necessary when measuring IMFs at the level of 0.1 nG; IMFs with a strength of at least 0.1 nG are needed to seed the magnetic fields in galaxies we observe today. Since only inflation can generate such a strong magnetic field, measuring such a signal would be a “smoking gun” signature that inflation occurred. Sehgal showed in (2) that CMB-HD could detect such IMFs with at least 3σ significance (see right panel of Figure 1).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

A Solar Fuels Nexus: Molecules and Materials for Light-Driven Catalysis

The American Chemical Society (ACS) selects two groups of graduate students each year to plan and host a one-day symposium at each national meeting (both fall and spring).This year our Graduate Student Symposium Planning Committee (GSSPC), composed of seven students from four universities, proposal entitled “A Solar Fuels Nexus: Molecules and Materials for Light-Driven Catalysis” was selected for the “Crossroads in Chemistry” ACS Meeting that will take place March 23-26, 2023 in Indianapolis, IN. All members of our GSSPC are affiliated with the DOE Fuels from Sunlight Energy Innovation Hub, with two from the Liquid Sunlight Alliance (LiSA) and five from the Center for Hybrid Approaches in Solar Energy to Liquid Fuels (CHASE). Here we request funds to support this symposium. This symposium will highlight research progress and perspectives in the solar fuels generation field and seeks to advance the four priority research objectives (PROs) established by the Department of Energy’s Office of Basic Energy Sciences (DOE-BES) Roundtable Report that are also central to many research goals within LiSA and CHASE. The symposium will consist of research presentations from 10 invited senior researcher speakers on topics such as molecular catalyst design, computational modeling of electron transfer systems, microenvironmental effects on CO2 reduction and H2O oxidation catalysis, and intelligent design of semiconductor interfaces with ample time for discussions. These research topics fit very well with the Solar Photochemistry supported research areas of “light-driven electron and energy transfer in condensed phase and interfacial molecular systems,” “electrocatalysis and photocatalysis of solar fuels reactions,” and “semiconductor photoelectrochemistry.” More broadly, this symposium seeks to advance the DOE-BES’s mission to: “support fundamental research to understand, predict, and ultimately control matter and energy at the level of electrons, atoms, and molecules” by providing a diverse atmosphere where such research will be disseminated, discussed, and debated. There will be a strong focus on Diversity, Equity, and Inclusivity (DEI) in our symposium. Of our 10 speakers, 7 will be from underrepresented demographics in STEM, including 5 who identify as women. Furthermore, we have representatives from academia accompanied by one national lab scientist and one officer from the Office of Fossil Energy and Carbon Management at the DOE. All speakers will be holding a short DEI moment ahead of their talks. In order to support the career development of attending early career scientists, we will also be hosting a luncheon specifically for graduate students and postdocs to provide them opportunities to network with the distinguished speakers and other attendees. DOE funds for this symposium will be used to support the attendance and participation of 15 graduate students from US institutions by defraying travel and registration costs. These funds will promote engagement and conversation between early career scientists in the solar fuels field, while disseminating solar fuels research funded by and relevant to the DOE.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Novel ceramic capacitors with ultrahigh energy density and efficiency (Final Technical Report)

Antiferroelectric ceramics are a special class of material that have shown great potential as the dielectric in electrical capacitors due to their high energy- and power-density. During each charge-discharge cycle, the ceramic undergoes transformation to a ferroelectric phase and resumes its antiferroelectric phase. The hysteresis associated with the transitions leads to a mediocre energy efficiency and service lifetime of antiferroelectric capacitors and, hence, their almost absence in commercial products. Under the support of this research project, we first formulated a universal lattice-compatibility theory that included electrostatic polarization energy along with elastic energy and thermal energy to understand the origin of the hysteresis in antiferroelectric oxides. Guided by this compatibility theory, we conducted high-throughput density functional theory (DFT) calculations to assess chemical modifiers and their effect on crystal structures of 400+ PbZrO 3 -based compositions. Down-selected compositions were experimentally validated for their suppressed hysteresis and higher energy efficiency. The verified low-hysteresis compositions were then expanded to an antiferroelectric ceramic library with nearly 500 new compositions (more than 1,500 samples) using high-throughput experiments involving ceramic synthesis and property screening. The large quantity of data generated (theory and experimental) in these tasks were processed by machine-learning techniques and identified trends were fed to the next iteration. In the end, we successfully discovered four compositions with near-zero hysteresis, yielding a world-record energy efficiency of 98.2% at an energy density of 3.0 J/cm 3 . Furthermore, our antiferroelectric ceramic capacitor reaches 79.5 million charge-discharge cycles lifetime, a factor of 80 enhancement over previous antiferroelectric ceramics with large hysteresis. These research accomplishments have not only met the milestones set in the SOPO, but also led to two patent filings, three journal publications (one of them was in Advanced Materials, impact factor 29.4), and nine oral presentations at various venues. Through the course of the project, three postdocs, four Ph.D. students, and one M.S. student were trained. In short, our project established a new methodology in searching next-generation functional ceramics on the fundamental side and discovered several high-efficiency antiferroelectric compositions for capacitors on the applied side. Once fabricated into the multilayer form for commercial applications, these ceramic capacitors can potentially enable the high temperature high power density DC-link capacitors that are critical for the next generation inverters in electric vehicles. The project also significantly contributed to the nation’s workforce development in the STEM fields.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Understanding and modeling current and future coastal wetland methane dynamics (Final Report)

The coastal terrestrial-aquatic interface (TAI) is a highly dynamic component of the Earth system that plays a critical role in biogeochemical cycling. Due to its dynamic nature, the processes that regulate decomposition and methane (CH 4 ) emissions are of greater significance at the TAI than in upland systems. Despite this, we have limited mechanistic understanding of how climate stressors interact to regulate the electron acceptors and donors that determine decomposition pathways within TAIs, including the generation of hot spots and hot moments. Accurately modeling these processes is critical for incorporating the coastal TAI into Earth systems models, such as DOE’s E3SM. With previous DOE support, we adapted an aerobic terrestrial representation of decomposition using PFLOTRAN, a reactive flow and transport model, and added anerobic decomposition pathways, salinity, and oxygen (O 2 ) that fluctuates independently of water table level. However, because this model (PFLOTRAN TAI ) is based on decomposition rates and organic matter carbon to nitrogen ratios from terrestrial systems, its performance in TAI systems is currently limited by the lack of empirical data to properly parameterize variables. In addition, while PFLOTRAN TAI can simulate movement of O 2 into sediments, it is not currently capable of tracking the movement of CH 4 gas through plant tissues due to both current model structure and lack of available data. Our overall objective of the project was the increase our mechanistic understanding of CH 4 dynamics in response to environmental change, such that we can improve the representation of these dynamics in PFLOTRAN. We installed automated flux chambers in a new field-scale active soil warming experiment and set up marsh organs (mesocosms) to test effects of warming, flooding, and salinity. This resulted in a new dataset consisting of chamber-level CH 4 flux measurements across multiple sites, ecological conditions, and timeframes, as well as corresponding measurements on porewater chemistry, soil carbon quality, plant biomass, and redox reaction rates. Using these data, we improved PFLOTRAN TAI to more accurately model CH 4 dynamics and successfully tested our hypotheses. This grant contributed to the professional development of 3 postdocs, 4 undergraduate interns, 4 teacher interns, 17 technicians, and 15 participatory scientists. The automated chamber technology designed for this grant has also been shared with multiple new projects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Fundamental Studies of the Vibrational, Electronic, and Photophysical Properties of Tetrapyrrolic Architectures

The ability to capture and utilize light in the near-ultraviolet (NUV), visible and near-infrared (NIR-I and NIR-II) spectral regions (i.e., 320–400, 400–700, 700–1000, 1000–1700 nm) is essential for any solar-energy conversion scheme. Nature employs chlorophylls and bacteriochlorophylls in light-harvesting architectures to absorb light in the blue and red/NIR regions. Accessory pigments (carotenoids, bilins) augment absorption of the (bacterio)chlorophylls in the green region. The harvested energy is funneled to a reaction center protein, where charge separation occurs. Subsequent migration of the electron and the hole stabilizes and stores the energy from light via redox chemistry. The long-term objective of the Bocian/Holten&Kirmaier/Lindsey research program under this DOE grant has been to develop tetrapyrrole-based molecular architectures that absorb sunlight, funnel energy and separate charge with high efficiency. Integral to the program has been iterative cycles of design, synthesis and characterization that provided deep insights into the relationships between chemical composition, electronic structure, and key static and dynamic properties (vibrational, redox, photophysical, energy/charge transfer) of tetrapyrrolic systems. Such architectures included monomers, dyads, larger arrays, and complexes with accessory components. The objective was to develop molecular designs and guiding principles to enhance current and future energy-conversion schemes. Molecular arrays targeted to address one or more fundamental questions concerning light harvesting and energy/charge transfer were constructed from analogues of the naturally occurring hemes, chlorophylls and bacteriochlorophylls. Diverse, tunable synthetic building blocks were prepared that spanned the three respective tetrapyrrole families, which are the porphyrins, chlorins and bacteriochlorins. Thus, the research focused on porphyrins as well as synthetic surrogates for chlorophylls (chlorins, 13 1 -oxophorbines and chlorin-imides) and bacteriochlorophylls (bacteriochlorins, bacterio-13 1 -oxophorbines and bacteriochlorin-imides), generically termed hydroporphyrins. Although the three tetrapyrrole classes (porphyrins, chlorins and bacteriochlorins) absorb light strongly in the violet-blue spectral region, the long-wavelength absorption band typically lies in the green-orange, red, and NIR regions, respectively, with increasing intensity. Understanding the spectra, electronic structure, and energy/charge-transfer properties of such tetrapyrrolic macrocycles is of central importance for the rational design of molecular architectures for solar-energy conversion. Our integrated program of molecular design and synthesis coupled with a variety of spectroscopic, electrochemical, and computational studies have probed from first principles how structural and electronic properties of tetrapyrrolic macrocycles dictate spectral properties as well as the rates of ground-state hole/electron transfer and excited-state energy flow in multicomponent architectures. Individual molecules and multicomponent architectures were designed to test ideas of fundamental importance, often requiring the development of new synthetic methodology. The members of the collaborative team had almost daily discussions by phone and/or e-mail concerning design of molecules, flow of compounds between the labs, planning of physical characterization studies, discussing results and analysis and integrating into design of next generation architectures, and the preparation of manuscripts. Furthermore, students and postdocs in the different labs routinely communicated with one another to facilitate the advancement of the research activities. In short, a highly integrated and collaborative research program was well established among the groups. The research effort involved molecular design and synthesis of synthetic molecular architectures by the Lindsey group integrated with physicochemical and photophysical characterization by the Bocian group and the Holten&Kirmaier group (Figure 2). The Bocian group carried out electrochemical, electron paramagnetic resonance (EPR), resonance Raman (RR), and Fourier-transform infrared (FT-IR) studies, as well as density functional theory (DFT) calculations and the time-dependent extension (TDDFT) to gain insight into excited-state properties. The Holten&Kirmaier group carried out static and time-resolved absorption and fluorescence spectroscopy studies and simulated absorption spectra using molecular orbital (MO) energies from DFT as input to the four-orbital model to complement the TDDFT calculations. The combined measurements provided understanding of the vibrational/electronic properties of the individual molecules and the changes that occur upon incorporation into multicomponent architectures. This information underpinned elucidating the mechanisms and timescales of ground-state hole/electron transfer and excited-state energy and charge transfer.

14 SOLAR ENERGY↗
DOE OSTI2024

Institute for Catalysis in Energy Processes (ICEP) (Final Report)

The Institute for Catalysis in Energy Processes (ICEP) was a multi-PI program located at the Northwestern University Center for Catalysis and Surface Science from 2006-2024. Over several renewal cycles and several organizing themes, ICEP addressed fundamental questions in catalysis science. In turn, the scientific questions addressed were directly relevant to the efficient use of the nation’s resources to produce fuels and commodity chemicals, harness alternate energy sources for chemical reactions such as light or electricity, reduce emissions and waste, and minimize the impact of our use of plastics. Selective oxidation, (oxidative) dehydrogenation, deNOx, CO 2 reduction, hydrogen release, polymer decomposition / depolymerization, and many other reactions of intense interest to the US Department of Energy were studied in the center. Major ICEP strengths were in catalyst synthesis, in measurements that elucidated catalyst properties, in reaction mechanisms and kinetics, and in predictive theory and modeling. ICEP researchers were often the inventors or developers of materials and methods that were brought to bear on the Institute’s catalytic systems. Key characterization tools advanced through this project included resonance Raman and related techniques, sum frequency generation, and X-ray standing wave spectroscopy. Center members relied extensively on computational tools such as density functional theory and microkinetic modeling to fully investigate catalyst structures and catalytic mechanisms. ICEP researchers were early developers of atomic layer deposition (ALD) for catalyst synthesis and were early pioneers of metal organic frameworks for catalysis. ICEP innovations are found in areas of intense research such as single-atom catalysts, catalytic deconstruction of plastics, and catalytic MOFs, to name a few. Research areas initiated by ICEP indirectly led to DOE EFRCs, startup companies, and other achievements. Over its 18 years of existence, ICEP involved two different PIs (Stair and Notestein) and 24 senior investigators across several academic disciplines at Northwestern University. There were tight collaborations with Argonne National Laboratory, including specialized equipment and experiments permanently located there. The center supported ~400 person-years of effort by graduate students and postdocs, either directly through DOE support or indirectly by leveraging independent support provided to the trainees, e.g. through the NSF GRFP or internal fellowships. The project resulted in 328 manuscripts and numerous conference presentations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quasi-static to Dynamic Mechanical Response and Microstructure Development of Tantalum-Tungsten Alloys

Lawrence Livermore National Laboratory (LLNL) is interested the quasi-static to dynamic mechanical response and microstructure evolution of tantalum-tungsten (Ta-W) alloys (Ta-2.5W, Ta-5W, and Ta-10W, wt.%) made by conventional wrought processing and additive manufacturing (AM). This work scope was performed at the Colorado School of Mines (Mines) and included quasi-static (e.g., 10 -3 s -1 ) mechanical testing in tension and compression, along with selected high strain rate (Kolsky) pressure bar testing in compression (e.g., 10 3 s -1 ), with and without temperature variations in some instances. Complementary microstructure characterization was performed on undeformed and deformed samples to understand the role of processing on microstructural evolution and the deformation mechanisms that impact the mechanical response with variations in strain rate, temperature, and strain state (e.g., tension versus compression in selected examples). The wrought material provided by LLNL from Viridis Materials was found to have unrecrystallized regions within the microstructure, which led to unexpected results relative to previously reported properties for Ta-W. The AM Ta-2.5W (wt.%) material provided by LLNL was found to have higher compressive strength than wrought Ta-2.5W (wt.%), which is hypothesized to be due to differences in the crystallographic texture between the two materials. This project partially supported several postdocs and graduate students at Mines.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Report on DOE-Supported Participation in the 18th International Congress on Photosynthesis Research (IPC 2022)

Photosynthesis is the primary natural process for conversion of solar energy to chemical energy. Solar energy is the only clean, renewable source of energy that has sufficient capacity to replace fossil fuels and meet rising global energy needs. Meeting this challenge means understanding photosynthetic energy conversion at a molecular level, a task requiring perspectives from all disciplines of science. The 18th International Congress on Photosynthesis (IPC) is facilitating just that by providing a forum for scientists from all corners of the world to come together to share ideas and build new collaborations that will improve the lives of future generations. A vibrant knowledge of each of the diverse aspects of basic and applied photosynthesis research obviously depends upon a healthy scientific exchange among the members of the research community. While senior scientists are more likely able to make the long trip to this important meeting, the travel costs for students and postdocs would otherwise prohibit participation for talented junior US scientists. At the same time, this is precisely the kind of meeting that strengthens interest and careers in the important scientific directions represented by this conference. For all scientists this is an opportunity to learn firsthand about the very latest advances in the field and to meet and brainstorm with collaborators as well as make new collaborations. For junior scientists, this funding is giving an opportunity to do these things plus it is often the first tangible experience regarding the global, international significance of their own projects. Overall, the diversity of topics and technical approaches is providing an extremely stimulating multidisciplinary environment for junior and senior scientists performing research in a variety of areas that are within the scope to the US DOE mission. In collaboration with the executive members of the North American Photosynthesis Conference Association (NAPCA and the International Society of Photosynthesis research (ISPR), a competitive selection of junior participants is being made based upon the quality of the abstracts and materials submitted by self-identified candidates that have applied following a broadcast call for applications from junior US scientists. Financial support is consisting of waivers for the registration cost of the meeting and partial living expenses at local dormitory facilities at the conference site.

08 HYDROGEN↗
DOE OSTI2025

Research in Elementary Particle Physics

The Experimental High Energy Physics group in the Department of Physics & Astronomy at Louisiana State University (LSU) is composed of faculty, postdocs and students. We perform research in experimental neutrino physics at the Intensity Frontier (DUNE, ProtoDUNE and T2K). The group continues their principal research efforts on the T2K and DUNE projects to measure neutrino oscillation parameters and study neutrino properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

CAMAS 2025: Continuing to Advance Arctic Marine Science

The Consortium for the Advancement of Marine Arctic Science (CAMAS) held its second annual Workshop and Early-Career School in Seattle, WA, on April 15-18, 2025. The workshop attracted 74 participants, including a dozen scientists from Europe (8) and Asia (4). The goal of CAMAS is to facilitate and enhance international collaboration on marine Arctic science, in order to advance the understanding and model representation of key marine Arctic processes that contribute to the rapid changes in the Arctic Earth system. These rapid changes have profound impacts on operations in the Arctic, including those associated with the national and energy security of the United States. The Early-Career School started the event on Tuesday April 15. Thirty-three early-career scientists (postdocs and students) gathered for lectures and discussions on topics like high-resolution Arctic Ocean and sea ice modeling; biogeochemistry of the Arctic; Machine Learning for Arctic Earth system modeling; and an Arctic perspective on geo-engineering.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

International Workshop on Electronic Structure 2024 (ES 24)

The 36th annual Workshop on Recent Developments in Electronic Structure Theory commenced on June 2-5, 2024 at Boston University with 136 in-person and 75 virtual attendees. The organizing committee was composed of five faculty at Boston University with seven local area faculty comprising the greater Boston area advisory committee. On the first day, two hands-on workshops, NEXMD and ComDMFT were held on June 2, two full days of presentations were held on June 3-4 and one half day on June 5. There were 19 invited speakers who spoke about the state-of-the-art in electronic structure methods, including density functional theory, many-body perturbation theory, and the incorporation of machine learning into electronic structure calculations. In addition, 45 young scientists presented posters on June 4. Housing at a reduced rate was provided at the Boston University dormitories. This conference provided a valuable opportunity for scientists, students, postdocs, and senior researchers alike, to disseminate their latest research results, discuss their ideas and best practices, learn from each other, and form new collaborations.

42 ENGINEERING↗
DOE OSTI2025

High Energy Density Physics of Inertial Confinement Fusion Ablator Materials

The historic December 5, 2022 experiment at Lawrence Livermore National Lab’s (LLNL) National Ignition Facility (NIF) reached fusion energy ignition for the first time. This is the most important scientific breakthrough of the 21st century paves the way to future clean inertial fusion energy (IFE). The diamond (high density carbon (HDC)) ablator material used in this experiment displays detrimental effects due to the development of hydrodynamic instabilities at the diamond/fuel interface under shock compression. New alternatives to diamond ablators are required to step up the energy yield in ICF experiments. The unique combination of mechanical strength (approaching that of diamond), the ability to accommodate high-Z dopants (in contrast to diamond), and the tunability of the properties (through synthesis material with varying sp 3 content) make amorphous carbon (a-C) a promising material for next-generation IFE ablative capsules. However, despite its critical importance to the IFE program, the behavior of a-C carbon at extreme temperatures and pressures remains largely unexplored. The primary goals of this project were to perform groundbreaking dynamic compression experiments and predictive simulations to uncover the fundamental high-energy-density physics of amorphous carbon. Our goals were (1) to uncover the metastability range of amorphous carbon and probe phase transitions to diamond or metastable supercooled liquid carbon; (2) to acquire high-quality equation of state (EOS) data and develop an experimentally validated EOS from machine-learning MD simulations of the complex states of carbon; and (3) to uncover the complex behavior of carbon liquid in both thermodynamically stable and metastable supercooled states by accessing large areas of carbon phase diagram with amorphous samples with variable sp 3 content. Our proposed experimental program included measurements of equation of state and diffraction measurements using the Omega EP laser at the Laboratory of Laser Energetics at the University of Rochester. The theoretical/simulation program involved the development of machine-learning models of the complex response of amorphous carbon under dynamic compression by performing molecular dynamics simulations at experimental time and length scales using leadership class DOE supercomputers. Simulations guided experiments to observe predicted phenomena and acquire critical experimental data in specific pressure-temperature domains to validate theoretical models. This research delivered fundamental properties of novel amorphous carbon IFE ablator material, including phase diagram and EOS. These results will aid in IFE target design and implosion experiments. A unique combination of predictive simulations and dynamic and static experiments provided a highly inspirational intellectual environment for graduate students and postdocs involved in this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Searches for New Long-Lived Particles and Upgrade to the ATLAS Inner Detector (Final Technical Report)

The search for new fundamental particles is one of the defining goals of the Large Hadron Collider (LHC). The discovery of the Higgs Boson by the ATLAS and CMS collaborations provided the capstone of the Standard Model of particle physics, but outstanding questions remain. Why does the Higgs boson have a mass of 125 GeV when its natural mass would be many orders of magnitude larger? Is there a universal symmetry which unites all three forces described by the Standard Model? Can that symmetry be extended to include gravity? Is dark matter, evidenced by astronomical observations, made of a particle that interacts via Standard Model forces with the rest of matter? Together, these motivations provide compelling arguments that new physical processes await discovery. This project addressed some outstanding questions about the fundamental particles and their interactions with the ATLAS experiment at the Large Hadron Collider. In particular, the project improved the discovery potential for new, long- lived particles produced via electroweak processes in proton-proton collisions and set world-leading limits on their existence for certain values of their potential mass and lifetime. To achieve this, the project developed new data analysis methods, developed new triggers to select events with new long-lived particles during data-taking of the ATLAS experiment, and analyzed the largest proton–proton collision dataset ever produced. The project also supported significant development of the data acquisition software for the upgrade to the ATLAS inner detector, the Inner TracKer (ITk). The upgrade of the ATLAS inner detector is essential to the success of the entire Phase II physics program on ATLAS. Personnel supported by the project provided support for integration, assembly, and testing of the inner two layers of the ITk pixel system during its prototype and pre-production phase. Four PhD students and two post-doctoral scholars were supported by the grant and received invaluable scientific training as part of the research endeavor. The students and postdocs gained essential professional skills in the areas of advanced data analysis techniques, statistical analysis of data and simulation, programming in C++ and Python, hardware and instrumentation development, and presentation and collaboration skills. Additionally, approximately ten undergraduate students supported through other funding sources participated in research activities synergistic with the goals of this project, receiving essential mentorship from the personnel supported by this project.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Real Time, In-line Monitoring of Hanford Tank Wastes - Year 1 Report

The team comprised of students, postdocs, early, mid and senior career scientists from Los Alamos National Laboratory, Savanah River National Laboratory, Georgia Tech and Florida International University, with the guidance of H2C, is developing a suite of in-line instruments for the Hanford high level waste (HLW) and low active waste (LAW) processes to provide near-real-time analysis of waste form physical properties and composition. The work builds on results from the recent DOE-ORP, EM Technology Development and other projects that demonstrated promise for the use of real-time in-line monitoring (RTIM) to measure chemical compositions of slurries of up to 20 weight % solids. The goal is for this instrument suite is to substantially reduce the need for sampling for process control. Sample waste, exposure associated with sample analysis, and the demand for an external laboratory facility would be greatly reduced. The throughput of waste treatment systems would be improved by elimination of the downtime caused by waiting for sample results. This translates into reduced process storage as process knowledge will be continuously updated in near-real-time. These breakthrough technologies would significantly reduce the life cycle cost and accelerate the schedule for the Hanford tank waste mission.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Support for the 32 nd Annual Meeting of the Inter-American Photochemical Society

This award offset the registration and travel costs for researchers from U.S. institutions to attend the 32 nd Inter-American Photochemical Society meeting held on Jan 2-5, 2025, in Miramar Beach, Florida. The Inter-American Photochemical Society (I-APS) is a non-profit organization dedicated to promoting and disseminating knowledge and encouraging the development of fundamental and allied photochemistry throughout the Americas. The I-APS annual meeting is a particularly important tool for fulfilling this goal as it provides a welcoming venue to highlight research progress in theoretical, experimental, and applied aspects of photochemistry and molecular photophysics by researchers in all stages of their careers. The participation of graduate students and postdocs at this conference is particularly important as it aids in training the next generation of scientists in photochemistry. This award provided travel awards to three Assistant Professors and fourteen graduate and two undergraduate students to attend the I-APS Meeting in 2025. A majority of the science presented/discussed at the I-APS meeting is in direct alignment with the mission of the DOE and the Solar Photochemistry program, including studying fundamental phenomena, encompassing light absorption, photoinduced energy/electron transfer, charge separation, and charge and energy transport across mesoscale dimensions, as well as their application in generating electricity and chemical bonds using light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Properties of Electronic Materials

This final technical report summarizes the research conducted under DOE Grant DE-SC0002623, "Properties of Electronic Materials," led by Principal Investigator Shengbai Zhang at Rensselaer Polytechnic Institute. Over the 16-year period, the project employed first-principles computational methods to investigate the structural, electronic, and dynamic properties of a wide range of electronic materials, with applications in energy technologies, optoelectronics, and data storage. Key areas included topological insulators, phase-change materials, graphene and two-dimensional systems, perovskites for photovoltaics, defect engineering in semiconductors, kagome lattices, and ultrafast carrier dynamics. The research resulted in 115 peer-reviewed publications, advancing fundamental understanding of material behaviors at the atomic scale and contributing to innovations in renewable energy, memory devices, and quantum materials. Findings have implications for improving energy efficiency, developing lead-free solar cells, and enabling high-speed data processing. The work has trained numerous graduate students and postdocs, fostering the next generation of computational materials scientists. The original goals were to develop theoretical models and computational tools to predict and optimize electronic properties of materials for energy applications. All objectives were accomplished, with no major departures from planned methodologies. Challenges in computational scaling were addressed through access to high-performance computing resources.

36 MATERIALS SCIENCE↗