Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Revisiting group contribution theory for estimating fractional free volume of microporous polymer membranes

Fractional free volume (FFV) is a commonly used metric for the development of structure–property relationships for polymer membranes. The most common method to calculate FFV uses Bondi's group contribution method, first introduced in 1964. While updated in 1997, there has not been a significant compilation of new structural motifs since the advent of linear microporous polymers. Here, in this study, we critically examined the assumptions in Bondi's original method and provide four recommendations to streamline and improve the accuracy of calculating van der Waals volume (V W ) for any group. Using these recommendations, we created an updated list of (V W ) values for structural groups commonly present in microporous polymers. The (V W ) and FFV values were then calculated for a database of 123 microporous and high free volume polymers from the literature, showing an average 7% decrease in (V W ) and corresponding increase in FFV by a factor of 24% when compared to prior group contribution correlations in the literature. The significant apparent increase in estimated FFV provides a new perspective to understand and interpret the role of free volume on the separation performance of linear microporous polymers. Additionally, standardization of the group contribution method allows for the direct comparison of FFV values across studies.

42 ENGINEERING↗
NASA NTRS1982

Antimisting kerosene atomization and flammability

Various parameters found to affect the flammability of antimisting kerosene (Jet A + polymer additive) are investigated. Digital image processing was integrated into a technique for measurement of fuel spray characteristics. This technique was developed to avoid many of the error sources inherent to other spray assessment techniques and was applied to the study of engine fuel nozzle atomization performance with Jet A and antimisting fuel. Aircraft accident fuel spill and ignition dynamics were modeled in a steady state simulator allowing flammability to be measured as a function of airspeed, fuel flow rate, fuel jet Reynolds number and polymer concentration. The digital imaging technique was employed to measure spray characteristics in this simulation and these results were related to flammability test results. Scaling relationships were investigated through correlation of experimental results with characteristic dimensions spanning more than two orders of magnitude.

Fleeter, R.↗
DOE OSTI2021

In situ friction and wear behavior of rubber materials incorporating various fillers and/or a plasticizer in high-pressure hydrogen

Polymers are used routinely for equipment and infrastructure in hydrogen vehicle refueling stations, but significant gaps remain in understanding their hydrogen compatibility. The tribological properties of these materials in a high-pressure hydrogen environment is important in preventing component failure and the need for frequent replacement. We present in situ tribological studies on model rubbers, which include common fillers and plasticizer, using an in situ tribometer developed previously. Results suggest a clear, yet complicated, combined effect of the high-pressure hydrogen and the additives on the tribological performance of the chosen materials, as compared to matching experiments performed in ambient air. We find that the additives improved wear resistance in EPDM but deteriorated that in NBR due to disparate additive-polymer interactions.

Kuang, Wenbin↗
DOE OSTI2023

Quantifying molecular deformation in polymer melts by a generalized Zimm plot approach

The Zimm plot has been widely used to characterize the molecular dimensions of polymers from small-angle scattering experiments, where the reciprocal intensity is analyzed as a function of the square of the magnitude of the scattering wavevector Q. Here, this work explores the benefits of analyzing the reciprocal scattering intensity from deformed polymers, extending the original Zimm plot to anisotropic materials. In the small-angle limit, a tensorial extension of the Guinier law is found for the gyration tensor and the reciprocal single-chain structure factor. In the high-Q limit, application of the spherical harmonic expansion technique to the reciprocal structure factor permits direct model-independent analysis of spatially dependent molecular deformation of polymers. Additionally, the contributions from high-order spherical harmonics become insignificant in the reciprocal-intensity representation. The proposed generalized Zimm plot approach is demonstrated computationally with the affine deformation model and the Rouse model, and experimentally with small-angle neutron scattering measurements of deformed polystyrene melts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Additively manufacturing fluorine-containing polymers

A system and method of additively manufacturing a part including electrically conductive or static dissipating fluorine-containing polymers. The method includes depositing fluorine-containing polymer additive manufacturing material onto a build platform, selectively cross-linking portions of the deposited additive manufacturing material, and curing the selectively cross-linked portions such that the part is at least one of electrically conductive and static dissipating.

Selter, Thomas Matthew↗
DOE OSTI2026

Mechanisms of Metal Additive-Induced Ordering During SNIPS Membrane Formation

Isoporous membranes can be fabricated by combining self-assembly with nonsolvent induced phase separation (SNIPS) using an amphiphilic block copolymer like polystyrene-b-poly(4-vinylpyridine) (SV). Poly(4-vinylpyridine) (V) is known to complex with metal salts, which are hypothesized to stabilize solution ordering and preserve structure during casting. We explored how the molar ratio of metal additive to the poly(4-vinylpyridine) block affected the final membrane morphology via scanning electron microscopy (SEM). Dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and in situ grazing-incidence SAXS were used to track changes in solution ordering and chain conformation as a function of the molar ratio of the additive to the V block. Additives induced aggregation, promoted the formation of more compact conformations in solution, and facilitated micelle ordering onto lattices at optimal ratios. Furthermore, these experimental results were supported by random phase approximation calculations, which helped explain how the thermodynamic order–disorder transition shifts with additive binding strength. Stronger additive–polymer interactions reduced the block copolymer volume fraction required for ordering in solution, allowing ordered domains to form at lower polymer concentrations.

Additives↗
DOE OSTI2021

Depolymerization of polystyrene under ambient conditions

Depolymerization of the addition polymer polystyrene to monomeric styrene is facilitated by mechanochemical processing at room temperature under ambient atmosphere. The reaction occurs in metal-based milling media in concert with scission of macromolecular chains that generates carbon-centered free-radicals detectable by EPR spectroscopy, although the processing is performed in air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dielectric constant engineering of nonfullerene acceptors enables a record fill factor of 83.58% and a high efficiency of 20.80% in organic solar cells

Organic solar cells (OSCs) have achieved power conversion efficiencies (PCEs) surpassing 20%, but their development remains hindered by the inherently low dielectric constant (εr) of organic semiconductors, which limits charge transport and contributes to serious recombination losses. Herein, we present a comprehensive strategy to overcome the challenge by engineering the dielectric properties of nonfullerene acceptors (NFAs). Two Y-series NFAs of BTP-N3F and BTP-C3F have been synthesized featuring trifluoromethyl (CF 3 ) end-capped alkyl side chains. This molecular design significantly enhances the dipole moment and ε r (up to ∼5.9) when compared to the reference acceptor Y6 (∼3), reducing the exciton binding energy (E b ) and improving charge transport. Furthermore, the incorporation of a high-εr polymer additive, poly(pentafluorostyrene) (PPFS), synergistically improves the active layer morphology and dielectric properties, enabling efficient charge extraction and reduced recombination losses. Devices based on the optimized D18-Cl/BTP-C3F system have achieved a record-high fill factor (FF) of 83.58% and an impressive PCE of 20.80%, setting a new benchmark for OSCs. Finally, our results underscore the pivotal role of ε r in enhancing device performance and establish a versatile pathway for advancing OSC efficiency and stability through molecular and morphological optimization.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Facility Safety Plan – Building 225

B225 is operated by the Weapons and Complex Integration (WCI) Directorate and is classified as a Low Hazard facility for radiological hazards and Light Science Industry (LSI) for chemical, radiation generating devices (RGDs) and industrial hazards. Explosives and biological hazards are not authorized for B225. B225 is located in the southwest quadrant of Lawrence Livermore National Laboratory (LLNL) less than 600 meters from the nearest site boundary. B225 is a single-story concrete tilt-up building with a steel deck roof. The primary mission of this facility is to apply nondestructive evaluation (NDE) methods to materials, components, and assemblies. B225 also contains the polymer additive manufacturing laboratories. The floor plans for B225 are provided in Appendix A.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

DFO Computational Modeling Project - Catalytic Upgrading of Bio-based Furfural to 1,5-Pentanediol: A New Renewable Monomer for the Coatings Industry (Final Report)

This report summarizes the results of a collaborative effort between Oak Ridge National Laboratory (ORNL) and Pyran™ Inc. to utilize modeling capabilities developed by the CCPC (Consortium for Computational Physics and Chemistry) to assist Pyran in scaling up its proprietary process for thermocatalytic conversion of furfural to 1,5 pentanediol (PDO). Pyran’s bio-based PDO is a direct replacement for petroleum-based PDO and 1,6 hexanediol (HDO) currently used in polymers, additives, coatings, adhesives and sealants. The current market is in excess of $\$$1B/yr. According to Pyran, their production process results in 95+% reduction in fossil CO 2 at lower production costs compared to the existing petroleum-based routes for PDO & HDO. Other chemicals based on intermediates from this process have current markets in excess of $\$$10B/yr.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Catalytic Upgrading of Bio-based Furfural to 1,5-Pentanediol: A New Renewable Monomer for the Coatings Industry

This report summarizes the results of a collaborative effort between Oak Ridge National Laboratory (ORNL) and Pyran™ Inc. to utilize modeling capabilities developed by the CCPC (Consortium for Computational Physics and Chemistry) to assist Pyran in scaling up its proprietary process for thermocatalytic conversion of furfural to 1,5 pentanediol (PDO). Pyran’s bio-based PDO is a direct replacement for petroleum-based PDO and 1,6 hexanediol (HDO) currently used in polymers, additives, coatings, adhesives and sealants. The current market is in excess of $1B/yr. According to Pyran, their production process results in 95+% reduction in fossil CO 2 at lower production costs compared to the existing petroleum-based routes for PDO & HDO. Other chemicals based on intermediates from this process have current markets in excess of $10B/yr.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials

The paper presents results of experiments in which the thermal expansion and swelling behavior of an epoxy resin system and two graphite/epoxy composite systems exposed to water were measured. It was found that the cured epoxy resin swells by an amount slightly less than the volume of the absorbed water and that the swelling efficiency of the water varies with the moisture content of the polymer. Additionally, the thermal expansion of cured epoxy resin that is saturated with water is observed to be more than twice that of dry resin. Results also indicate that cured resin that is saturated with 7.1% water at 95 C will rapidly increase in moisture content to 8.5% when placed in 1 C water. The mechanism for this phenomenon, termed reverse thermal effect, is described in terms of a slightly modified free-volume theory in conjunction with the theory of polar molecule interaction. Nearly identical behavior was observed in two graphite/epoxy composite systems, thus establishing that this behavior may be common to all cured epoxy resins.

Adamson, M. J.↗
NASA NTRS1980

Viscous flow drag reduction; Symposium, Dallas, Tex., November 7, 8, 1979, Technical Papers

The symposium focused on laminar boundary layers, boundary layer stability analysis of a natural laminar flow glove on the F-111 TACT aircraft, drag reduction of an oscillating flat plate with an interface film, electromagnetic precipitation and ducting of particles in turbulent boundary layers, large eddy breakup scheme for turbulent viscous drag reduction, blowing and suction, polymer additives, and compliant surfaces. Topics included influence of environment in laminar boundary layer control, generation rate of turbulent patches in the laminar boundary layer of a submersible, drag reduction of small amplitude rigid surface waves, and hydrodynamic drag and surface deformations generated by liquid flows over flexible surfaces.

Hough, G. R.↗
NASA NTRS1982

Fully plasma-sprayed compliant backed ceramic turbine seal

A seal having a high temperature abradable lining material encircling the tips of turbine blades in turbomachinery is discussed. The minimum operating clearances between the blade tips and the lining of a high pressure turbine are maintained. A low temperature easily decomposable material, such as a polymer, in powder form is blended with a high temperature oxidation resistant metal powder. The two materials are simultaneously deposited on a substrate formed by the turbine casing. Alternately, the polymer powder may be added to the metal powder during plasma spraying. A ceramic layer is then deposited directly onto the metal polymer composite. The polymer additive mixed with the metal is then completely volatilized to provide a porous layer between the ceramic layer and the substrate.

Bill, R. C.↗
NASA NTRS1983

Influence of liquid water and water vapor on antimisting kerosene (AMK)

Experiments have been performed to evaluate the compatibility of liquid water and water vapor with antimisting kerosenes (AMK) containing polymer additive FM-9 developed by Imperial Chemical Industries. This effort consists of the determination of water solubility in AMK, influence of water on restoration (degradation) of AMK, and effect of water on standard AMK quality control methods. The principal conclusions of this investigation are: (1) the uptake of water in AMK critically depends upon the degree of agitation and can be as high as 1300 ppm at 20 C, (2) more than 250 to 300 ppm of water in AMK causes an insoluble second phase to form. The amount of this second phase depends on fuel temperature, agitation, degree of restoration (degradation) and the water content of the fuel, (3) laboratory scale experiments indicate precipitate formation when water vapor comes in contact with cold fuel surfaces at a much lower level of water (125 to 150 ppm), (4) precipitate formation is very pronounced in these experiments where humid air is percolated through a cold fuel (-20 C), (5) laboratory tests further indicate that water droplet settling time is markedly reduced in AMK as compared to jet A, (6) limited low temperature testing down to -30 C under laboratory conditions indicates the formation of stable, transparent gels.

Yavrouian, A. H.↗
NASA NTRS1983

Phosphorus-containing imide resins

Bis- and tris-imides derived from tris (m-aminophenyl) phosphine oxides by reaction with maleic anhydride or its derivatives, and addition polymers of such imides, including a variant in which a mono-imide is condensed with a dianhydride and the product is treated with a further quantity of maleic anhydride. Such monomers or their oligomes may be used to impregnate fibers and fabrics which when cured, are flame resistant. Also an improved method of producing tris (m-aminophenyl) phosphine oxides from the nitro analogues by reduction with hydrazine hydrate using palladized charcoal or Raney nickel as the catalyst is described.

Varma, I. K.↗
NASA NTRS1984

Shearing stability of lubricants

Shearing stabilities of lubricating oils containing a high mol. wt. polymer as a viscosity index improver were studied by use of ultrasound. The oils were degraded by cavitation and the degradation generally followed first order kinetics with the rate of degradation increasing with the intensity of the ultrasonic irradiation and the cumulative energy applied. The shear stability was mainly affected by the mol. wt. of the polymer additive and could be determined in a short time by mechanical shearing with ultrasound.

Shiba, Y.↗
NASA NTRS1984

Phosphorus-containing imide resins

Flame-resistant reinforced bodies are disclosed which are composed of reinforcing fibers, filaments or fabrics in a cured body of bis- and tris-imide resins derived from tris(m-aminophenyl) phosphine oxides by reaction with maleic anhydride or its derivatives, or of addition polymers of such imides, including a variant in which a mono-imide is condensed with a dianhydride and the product is treated with a further quantity of maleic anhydride.

Varma, I. K.↗