Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “platinum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Techno-economic and life cycle analyses of the synthesis of a platinum–strontium titanate catalyst

The heterogeneous platinum/strontium titanate (Pt/SrTiO 3 or Pt/STO) catalyst has garnered significant attention as a promising candidate for the hydrogenolysis of polyolefins to hydrocarbon oils. This study evaluates the cost and environmental impacts of a newly developed scalable Pt/STO catalyst production, which includes the synthesis of the STO support and the deposition of Pt onto the support. This two-step synthesis plays a significant role in assessing the commercial feasibility of the catalyst, while energy consumption during the process plays an important role in its environmental impacts. The CatCost and the Research and Development Greenhouse Gases, Regulated Emissions, and Energy use in Technologies (R&D GREET) models were used, respectively, to perform techno-economic analysis (TEA) and life cycle analysis (LCA) of the newly developed catalyst. The TEA showed that the raw materials, accounting for approximately 76% of the total operation cost, has a profound effect on the estimated catalyst cost, mainly due to the platinum precursor. The LCA findings indicated that the catalyst production generates greenhouse gas (GHG) emissions of 66 kg CO 2 e per kg, primarily due to the use of solvents and electricity in the process. The sensitivity analysis indicated that the total operating costs (OpEX), platinum precursor cost, and spent catalyst value (SCV) significantly impact the cost of the synthesized catalyst. Additionally, adopting solvent recovery strategies and using renewable electricity can reduce the GHG emissions of catalyst production to 29 kg CO 2 e per kg.

Heterogeneous Platinum/strontium titanate Catalyst↗
DOE OSTI2020

Effects of surface charge and cluster size on the electrochemical dissolution of platinum nanoparticles using COMB3 and continuum electrolyte models

We study the site-dependent dissolution of platinum nanoparticles under electrochemical conditions to assess their thermodynamic stability as a function of shape and size using empirical molecular dynamics and electronic-structure models. The third-generation charge optimized many-body potential is employed to determine the validity of uniform spherical representations of the nanoparticles in predicting dissolution potentials (the Kelvin model). To understand the early stages of catalyst dissolution, implicit solvation techniques based on the self-consistent continuum solvation method are applied. It is demonstrated that interfacial charge and polarization can shift the dissolution energies by amounts on the order of 0.74 eV depending on the surface site and nanoparticle shape, leading to the unexpected preferential removal of platinum cations from highly coordinated sites in some cases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ultrafast electron dynamics in platinum and gold thin films driven by optical and terahertz fields

Here, we investigate the ultrafast electron dynamics triggered by terahertz and optical pulses in thin platinum and gold films by probing their transient optical reflectivity. The response of the platinum film to an intense terahertz pulse is similar to the optically induced one and can be described by a two-temperature model with a 20% larger electron–phonon coupling for the terahertz-driven dynamics compared to the optically induced one, ascribed to an additional nonthermal electron–phonon coupling contribution. Surprisingly, gold films exhibit a much smaller terahertz pulse-induced reflectivity change and with a sign opposite to the optical case. Additionally we explain this remarkable observation with field emission of electrons due to Fowler–Nordheim tunneling, enabled in samples with thicknesses below the structural percolation threshold, where nanostructuring promotes near-field enhancement. Our results provide a fundamental insight into the ultrafast processes relevant to modern electro- and magneto-optical applications.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Platinum nanoparticle compression: Combining in situ TEM and atomistic modeling

The mechanical behavior of nanoparticles governs their performance and stability in many applications. However, the small sizes of technologically relevant nanoparticles, with diameters in the range of 10 nm or less, significantly complicate experimental examination. These small nanoparticles are difficult to manipulate onto commercial test platforms and deform at loads that are below the typical noise floor of the testing instruments. Here, we synthesized small platinum nanoparticles directly onto a mechanical tester and used a modified nanomanipulator to enhance load resolution to the nanonewton scale. We demonstrated the in situ compression of an 11.5-nm platinum nanoparticle with simultaneous high-resolution measurements of load and particle morphology. Molecular dynamics simulations were performed on similarly sized particles to achieve complementary measurements of load and morphology, along with atomic resolution of dislocations. The experimental and simulation results revealed comparable values for the critical resolved shear stress for failure, 1.28 and 1.15 GPa, respectively. Altogether, this investigation demonstrated the promise of, and some initial results from, the combination of atomistic simulations and in situ experiments with an unprecedented combination of high spatial resolution and high load resolution to understand the behavior of metal nanoparticles under compression.

42 ENGINEERING↗
DOE OSTI2022

Standardizing Platinum Dainotti-correlated gamma-ray bursts, and using them with standardized Amati-correlated gamma-ray bursts to constrain cosmological model parameters

ABSTRACT We show that the Platinum gamma-ray burst (GRB) data compilation, probing the redshift range 0.553 ≤ z ≤ 5.0, obeys a cosmological-model-independent three-parameter Fundamental Plane (Dainotti) correlation and so is standardizable. While they probe the largely unexplored z ∼ 2.3–5 part of cosmological redshift space, the GRB cosmological parameter constraints are consistent with, but less precise than, those from a combination of baryon acoustic oscillation (BAO) and Hubble parameter [H(z)] data. In order to increase the precision of GRB-only cosmological constraints, we exclude common GRBs from the larger Amati-correlated A118 data set composed of 118 GRBs and jointly analyse the remaining 101 Amati-correlated GRBs with the 50 Platinum GRBs. This joint 151 GRB data set probes the largely unexplored z ∼ 2.3–8.2 region; the resulting GRB-only cosmological constraints are more restrictive, and consistent with, but less precise than, those from H(z) + BAO data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

First-principles calculations of metal surfaces. II. Properties of low-index platinum surfaces toward understanding electron emission

The stability of low-index platinum surfaces and their electronic properties is investigated with density functional theory, toward the goal of understanding the surface structure and electron emission, and identifying precursors to electrical breakdown, on nonideal platinum surfaces. Propensity for electron emission can be related to a local work function, which, in turn, is intimately dependent on the local surface structure. The (1×N) missing row reconstruction of the Pt(110) surface is systematically examined. The (1×3) missing row reconstruction is found to be the lowest in energy, with the (1×2) and (1×4) slightly less stable. In the limit of large (1×N) with wider (111) nanoterraces, the energy accurately approaches the asymptotic limit of the infinite Pt(111) surface. Furthermore, this suggests a local energetic stability of narrow (111) nanoterraces on free Pt surfaces that could be a common structural feature in the complex surface morphologies, leading to work functions consistent with those on thermally grown Pt substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High-Platinum-Content Catalysts on Atomically Dispersed and Nitrogen Coordinated Single Manganese Site Carbons for Heavy-Duty Fuel Cells

Fuel cells for heavy-duty vehicles (HDVs) have attracted considerable attention because of their unique scalability, better fuel economy, the less demand for hydrogen refilling infrastructure. However, the potential application requires more stringent fuel cell durability up to 25,000 h. Membrane electrode assemblies (MEAs) made from platinum group metal (PGM) catalyst with relatively high loading 0.3 mgPt cm –2 play a crucial role in ensuring high-power and long-term durability. Integrating fine PGM nanoparticles and robust carbon support with strengthened interactions is critical for improving MEA performance and durability. Herein, a unique atomically dispersed and nitrogen coordinated single Mn site-rich carbon (M–N–C) support was developed for high content (40 wt%) platinum catalysts for the oxygen reduction reaction (ORR) cathode with reduced thickness. Compared with two controls studied in this work (e.g., a porous graphitic carbon-supported Pt and a commercial TKK Pt/C catalysts), the Pt (40 wt%)/Mn–N–C catalyst exhibited much enhanced catalytic activity and stability for the ORR in both aqueous acidic electrolyte and polymer electrolyte-based MEA. Here, we carefully elucidated the—role of the Mn–N–C support in promoting Pt catalyst concerning its high surface area, partially graphitic structure, and nitrogen dopants, providing better Pt nanoparticle dispersion, and strengthened interactions between Pt and carbon. Consequently, the MEA from the Pt (40 wt%)/Mn–N–C catalyst generated a 1.61 A cm –2 at 0.7 V based on HDV conditions (0.2 mgPt cm –2 and 250 kPa air). More importantly, the MEA is highly durable and can retain 1.31 A cm –2 at 0.7 V after 30,000 voltage cycles (~19% loss), surpassing the commercial Pt/C catalyst (loss of ~56%). Therefore, the Mn–N–C carbon-supported Pt catalyst holds a great promise to meet the challenging DOE target (1.07 A cm –2 at 0.7 V after 150,000 cycles) for HDVs.

25 ENERGY STORAGE↗
DOE OSTI2023

Engineered Catalyst Support with Improved Durability at Higher Weight Percentage of Platinum

Proton Exchange Membrane (PEM) fuel cells are a suitable electrochemical power source for heavy duty vehicle (HDV) applications due to their high efficiency and durability. The cathode of the fuel cell uses a higher geometric loading of platinum (∼0.2 to 0.4 mg Pt /cm 2 ) for the electrocatalysis of the kinetically sluggish Oxygen Reduction Reaction (ORR) which requires higher weight percent loading of the metal (∼50%) on the carbon support to decrease the catalyst layer thickness and hence, the reactant transport losses. The conventionally used supports for platinum catalyst, such as the KetjenBlack TM type high surface area carbon (HSC) features limited mesopore area for the dispersion of Pt nanoparticles leading to increased aggregation and poor durability. Here, we show a new class of carbon materials known as the Engineered Catalyst Support (ECS) developed by Pajarito Powder with higher mesopore fraction for the dispersion of higher weight percentage of Pt nanoparticles. ECS materials can disperse up to 50% Pt by weight of the catalyst thereby enabling lower catalyst layer thickness with higher performance retained after durability test. A comprehensive set of physico-chemical and electrochemical studies in membrane electrode assembly (MEA) are reported to understand the performance and durability of Pt/ECS catalysts.

08 HYDROGEN↗
DOE OSTI2023

Electrochemical Synthesis of Monodisperse Platinum-Cobalt Nanocrystals

The synthesis of platinum-cobalt nanocrystals (NCs) using colloidal solvothermal techniques is well understood. However, for monodisperse NCs to form, high temperatures and environmentally detrimental solvents are needed. We report a room temperature, aqueous method of platinum-cobalt NC synthesis using electrochemical reduction as the driving force for nucleation and growth. It is found that colloidal NCs will form in both the presence and absence of surfactant. Additionally, we report a monodisperse electrochemical deposition of NCs utilising a transparent conducting oxide electrode. The methods developed here will allow for a synthetic method to produce nanocatalysts with minimal environmental impact and should be readily applicable to other NC systems, including single- and multi-component alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electrodeposited platinum-gold alloy

A coating made of platinum-gold alloy is provided, together with a method of its preparation by electrodeposition. The alloy is composed of more than 50 atomic percent platinum. The microstructure of the alloy consists of generally ellipsoidal grains. More than half of the grains have a major axis of 10 nm or less.

Klavetter, Kyle Chris↗
DOE OSTI2021

Fleetite, Cu 2 RhIrSb 2 , a New Species of Platinum-Group Mineral from the Miass Placer Zone, Southern Urals, Russia

Fleetite, Cu 2 RhIrSb 2 , a new species of platinum-group mineral (PGM), was discovered intergrown with an Os–Ir–Ru alloy in the Miass Placer Zone (Au–PGE), southern Urals, Russia. A single grain 50 μm across was found. Osmium, ruthenium, and iridium are the main associated minerals; also present are Pt–Fe alloys, laurite, Sb-rich irarsite, Rh-rich tolovkite, kashinite, anduoite, ferronickelplatinum, heazlewoodite, PGE-bearing pentlandite and digenite, as well as micrometric inclusions of forsterite (Fo 93.7 ), chromite–magnesiochromite, and Mg-rich edenite. In reflected light, fleetite is light gray; it is opaque, isotropic, non-pleochroic, and non-bireflectant. We report reflectance values measured in air. A mean of seven point-analyses (wavelength-dispersive spectrometry) gave Cu 13.93, Ni 8.60, Fe 0.10, Ir 28.07, Rh 7.91, Ru 1.96, Sb 39.28, total 99.85 wt.%, corresponding to (Cu 1.41 Ni 0.58 Fe 0.01 ) Σ2.00 (Rh 0.49 Ni 0.36 Ru 0.12 ) Σ0.97 Ir 0.95 Sb 2.08 on the basis of six atoms per formula unit, taking into account the structural results. The calculated density is 10.83 g/cm 3 . Single-crystal X-ray studies show that fleetite is cubic, space group Fdm (#227), a = 11.6682(8) Å, V = 1588.59(19) Å 3 , and Z = 16. A least-squares refinement of X-ray powder-diffraction data gave a = 11.6575(5) Å and V = 1584.22(19) Å 3 . The strongest five reflections in the powder pattern [d in Å(I)(hkl)] are: 6.70(75)(111), 4.13(100)(220), 3.52(30)(311), 2.380(50)(422), 2.064(40)(440). Results of synchrotron micro-Laue diffraction experiments are consistent [a = 11.66(2) Å]. The crystal structure of fleetite was solved and refined to R = 0.0340 based upon 153 reflections with F o > 4σ(F o ). It is isotypic with Pd 11 Bi 2 Se 2 and best described as intermetallic, with all metal atoms in 12-fold coordination. Fleetite and other late exotic phases were formed by reaction of the associated alloy phases with a fluid phase enriched in Sb, As, and S in circulation in the cooling ophiolite source-rock. The mineral is named after Michael E. Fleet (1938–2017) in recognition of his significant contributions to the Earth Sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

How the Arrangement of Platinum Atoms on Ruthenium Nanoparticles Improves Hydrogen Evolution Activity

The platinum‐ruthenium (PtRu) system is highly active for hydrogen evolution reaction (HER) in alkaline media with both Pt and Ru playing active roles in the water dissociation step that generates adsorbed hydrogen atoms. Precise control of the arrangement of Pt atoms on Ru nanoparticles can maximize the Pt‐Ru sites for water dissociation and Pt‐Pt sites for hydrogen production and can considerably improve HER catalytic performance. By directing the growth and distribution of Pt on Ru hourglass nanoparticles, the arrangement of Pt on Ru is controlled into forming Pt islands, small Pt clusters, and strings of a few Pt atoms. Calculations show that the unique atomic string arrangements of Pt on Ru is the thermodynamically favorable configuration. Additionally, these strings have a favorable combination of Pt‐Ru and Pt‐Pt sites, making the Pt‐string on Ru the most active catalyst with a more than fivefold increase in turnover frequency for alkaline HER compared to the Pt‐island on Ru catalyst. The results show how controlling the Pt atomic arrangement on Ru nanoparticle surfaces for the tuning of Pt‐Pt and Pt‐Ru neighboring sites can direct toward a more efficient HER mechanism and thereby significantly enhancing HER performance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Janus Nanocages of Platinum-Group Metals and Their Use as Effective Dual-Electrocatalysts

Janus nanocages with distinctive platinum-group metals on the outer and inner surfaces can naturally catalyze at least two different reactions. In this work, we report a general method based on successive deposition and then selective etching for the facile synthesis of such nanocages. Herein, we have fabricated 11 different types of Janus nanocages characterized by a uniform size and well-defined {100} facets, together with porous, ultrathin, asymmetric walls up to 1.6 nm thick. When tested as dual-electrocatalysts toward oxygen reduction and evolution reactions, the Janus nanocages based on Pt and Ir exhibited superior activities depending on the thickness and relative position of the metal layer. Density functional theory studies suggest that the alloy composition and surface structure of the nanocages both play important roles in enhancing the electrocatalytic activities by modulating the stability of key reaction intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impact of Electrolyte Composition on Bulk Electrolysis of Furfural over Platinum Electrodes

Partial oxidation of furanic biomass derivatives such as furfural is of interest for the sustainable production of chemicals including furoic acid, maleic acid, and 2,5-furandicarboxylic acid (FDCA). The oxidative bulk electrolysis of furfural is here investigated on platinum electrodes in acidic media. The effects of potential, concentration, pH, and supporting anion are studied, and selectivity trends are coupled with attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) to illuminate adsorbate structures that influence the catalysis. Increasing potential is found to shift selectivity from primarily C 5 products to C 4 products, coincident with oxidation of the Pt surface. Selectivity changes are also observed moving from pH 1 to pH 4, with an increase in C 5 products at higher pH. Furthermore, changing from the weakly adsorbing perchlorate anion to the specifically-adsorbing phosphate anion results in a number of changes that manifest differently depending on potential and pH. Selectivity to furoic acid is found to be highest above the pKa of phosphoric acid due to the strongly adsorbed phosphate ions suppressing flat-lying configurations of furfural that lead to C−C cleavage. These results point toward opportunities to use electrolyte engineering to tune selectivity and optimize surface conditions to disfavor binding of inhibitory products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Proton- and deuteron-induced cross sections on natural platinum

Light-ion irradiations on natural platinum were performed to measure gold-radioisotope cross sections and isotope ratios, as well as to produce a carrier-free final product. Experimental cross sections are compared to TENDL-2023. There is good agreement with this work's results and other published literature values. In conclusion, several novel cross sections were determined including 190 Au, 191 Au, 199 Pt and several independent cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Rational design of platinum-group-metal-free electrocatalysts for oxygen reduction reaction

Platinum-group-metal (PGM)-free materials have been promised as potential replacement for Pt as the cathodic catalyst in proton exchange membrane fuel cells. Critical design criteria of the PGM-free catalyst reside on the high active site density to compensate its generally lower turn-over frequency and improved mass-charge transfers during the electrocatalysis. Herein, this short review summarizes the research activities in recent years from our team at Argonne National Laboratory in preparing highly active oxygen reduction reaction (ORR) catalysts using rationally designed porous organic precursors, as reported in the First Telluride Science Research Center (TSRC) Workshop on PGM-free Electrocatalysis in 2019. More recent studies by others are also discussed.

25 ENERGY STORAGE↗
DOE OSTI2022

Experimental study of the partitioning of some platinum group elements (Pd and Ir) between orthopyroxene and silicate melt

Past experiments and observations on natural samples have largely focused on the roles of olivine and chromite in controlling the behaviour of the platinum-group elements (PGE) during melting and solidification, whereas other phases, such as pyroxene, have gone largely uncharacterized. Here, to address this, experiments have been done to measure the partitioning of Pd (with a subset of results for Ir), between orthopyroxene and silicate melt at 1340 °C, 0.1 MPa and log fO 2 of FMQ - 1 to FMQ + 6 (FMQ = Fayalite-Magnetite-Quartz). The X-ray Absorption Near-Edge Structure (XANES) was measured in a subset of experiment glasses. Glass concentrations of Pd (corrected to unit Pd activity) increase from ~6 to ~650 ug/g over the fO 2 range of experiments. The slope of the solubility-fO 2 relation is consistent with Pd 1+ as the dominant oxidation state, with evidence for Pd 0 and Pd 2+ at the lowest and highest experiment fO 2 , respectively. Consistent with this result, the XANES reveal spectral features similar to Pd 0 and Pd 2+ spectral reference materials (specRM) at the most reduced and oxidized synthesis conditions, respectively. Other lines of evidence require the presence of a third melt species, here interpreted to be Pd 1+ . Values of orthopyroxene/melt partition coefficients for Pd (D Pd Opx/melt ) are 0.0051 (+/-0.006) at log fO 2 < ΔFMQ + 3, increasing with fO 2 to a maximum of 0.013 at ~FMQ + 6. Sodium partition coefficients, expected to be similar to Pd, range from 0.0061 (+/-0.00061) at FMQ + 3, increase to 0.007–0.009 at higher fO 2 , but with no clear systematic trend. A value for D Ir Opx-melt of ~0.6 was measured at ~FMQ + 4, indicating significantly more compatible behaviour for Ir relative to Pd. Partitioning results are interpreted in the context of the Blundy-Wood elastic strain model in which the variation in partitioning is related to ionic radius mismatch to an optimal crystallographic site size. Based on the trend in ionic radius with oxidation state, the estimated ionic radius of Pd 1+ in octahedral coordination is similar to Na 1+ , and comparison to previous orthopyroxene-melt partitioning experiments suggests D Pd1+ opx/melt and DNaopx/melt should be nearly identical, consistent with the results of this study. The ionic radius of VI-fold Pd 2+ is close to the optimal M2 site size, so an increased proportion of this species with fO 2 accounts for the larger values of D Pd opx/melt at the highest fO 2 investigated. The much larger partition coefficient for Ir is consistent with the presence of Ir 2+ , whose estimated ionic radius is close to Fe 2+ and Mg 2+ , as well as predictions for the optimal M1 site size. With the assumption that D Pd opx/melt = D Na opx/melt , combined with a revised value for the Pd content of the primitive mantle, a melting model is presented that better reproduces the Pd concentration of high degree melts from sulfide-free mantle sources.

58 GEOSCIENCES↗