Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phased”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Study of phase relationships in the Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} system. Phase diagram and thermal characteristics of phases

A diagram representing phase relationships in the Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} phosphate system has been developed on the basis of results obtained by thermal analysis (DTA/DSC/TGA) and X-ray diffraction (XRD) methods. One intermediate compound with the formula Sr{sub 3}Ce(PO{sub 4}){sub 3} occurs in the Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} system at temperatures exceeding 1045 °C. The compound has a eulytite structure with the following structural parameters: a=b=c=10.1655(8) Å, α=β=γ=90.00°, V=1050.46(6) Å{sup 3}. It's melting point exceeds 1950 °C. A limited solid solution exists in the system, which possesses the structure of a low-temperature form of Sr{sub 3}(PO{sub 4}){sub 2}. At 1000 °C the maximal concentration of CePO{sub 4} in the solid solution is below 20 mol%. The solid solution phase field narrows with increased temperature. There is a eutectic point in the (Sr{sub 3}(PO{sub 4}){sub 2}+Sr{sub 3}Ce(PO{sub 4}){sub 3}) phase field at 1765 °C and 15 mol% of CePO{sub 4}. The melting temperature of Sr{sub 3}(PO{sub 4}){sub 2} is 1882±15 °C. - Graphical abstract: The phase diagram of Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} system showing the stability ranges of limited solid solution and Sr{sub 3}Ce(PO{sub 4}){sub 3} phases. - Highlights: • Sr{sub 3}(PO{sub 4}){sub 2} melts at 1882 °C. • Phase diagram of Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} system has been proposed. • Limited solid solution of CePO{sub 4} in Sr{sub 3}(PO{sub 4}){sub 2} forms in the system. • The Sr{sub 3}Ce(PO{sub 4}){sub 2} phosphate is stable at temperatures above 1045 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic evolution of liquid-liquid phase separation during continuous cooling

Solidification from a multiphase fluid involves many unknown quantities due to the difficulty of predicting the impact of fluid flow on chemical partitioning. Real-time x-ray radiography has been used to observe liquideliquid phase separation in Al90In10 prior to solidification. Quantitative image analysis has been used to measure the motion and population characteristics of the dispersed indium-rich liquid phase during cooling. Here we determine that the droplet growth characteristics resemble well known steady-state coarsening laws with likely enhancement by concurrent growth due to supersaturation. Simplistic views of droplet motion are found to be insufficient until late in the reaction due to a hydrodynamic instability caused by the large density difference between the dispersed and matrix liquid phases.

Alloys↗

Mechanical behaviors and phase transition of Ho{sub 2}O{sub 3} nanocrystals under high pressure

Mechanical properties and phase transition often show quite large crystal size dependent behavior, especially at nanoscale under high pressure. Here, we have investigated Ho{sub 2}O{sub 3} nanocrystals with in-situ x-ray diffraction and Raman spectroscopy under high pressure up to 33.5 GPa. When compared to the structural transition routine cubic -> monoclinic -> hexagonal phase in bulk Ho{sub 2}O{sub 3} under high pressure, the nano-sized Ho{sub 2}O{sub 3} shows a much higher onset transition pressure from cubic to monoclinic structure and followed by a pressure-induced-amorphization under compression. The detailed analysis on the Q (Q = 2π/d) dependent bulk moduli reveals the nanosized Ho{sub 2}O{sub 3} particles consist of a clear higher compressible shell and a less compressible core. Insight into these phenomena shed lights on micro-mechanism studies of the mechanical behavior and phase evolution for nanomaterials under high pressure, in general.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlated structural and electronic phase transformations in transition metal chalcogenide under high pressure

Here, we report comprehensive studies on the high-pressure structural and electrical transport properties of the layered transition metal chalcogenide (Cr{sub 2}S{sub 3}) up to 36.3 GPa. A structural phase transition was observed in the rhombohedral Cr{sub 2}S{sub 3} near 16.5 GPa by the synchrotron angle dispersive X-ray diffraction measurement using a diamond anvil cell. Through in situ resistance measurement, the electric resistance value was detected to decrease by an order of three over the pressure range of 7–15 GPa coincided with the structural phase transition. Measurements on the temperature dependence of resistivity indicate that it is a semiconductor-to-metal transition in nature. The results were also confirmed by the electronic energy band calculations. Above results may shed a light on optimizing the performance of Cr{sub 2}S{sub 3} based applications under extreme conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The phase diagram of Ti-6Al-4V at high-pressures and high-temperatures

We report results from a series of diamond-anvil-cell synchrotron x-ray diffraction and large-volume-press experiments, and calculations, to investigate the phase diagram of commercial polycrystalline high-strength Ti-6Al-4V alloy in pressure–temperature space. Up to ~30 GPa and 886 K, Ti-6Al-4V is found to be stable in the hexagonal-close-packed, or α phase. The effect of temperature on the volume expansion and compressibility of α–Ti-6Al-4V is modest. The martensitic α → ω (hexagonal) transition occurs at ~30 GPa, with both phases coexisting until at ~38–40 GPa the transition to the ω phase is completed. Between 300 K and 844 K the α → ω transition appears to be independent of temperature. ω–Ti-6Al-4V is stable to ~91 GPa and 844 K, the highest combined pressure and temperature reached in these experiments. Pressure–volume–temperature equations-of-state for the α and ω phases of Ti-6Al-4V are generated and found to be similar to pure Ti. A pronounced hysteresis is observed in the ω–Ti-6Al-4V on decompression, with the hexagonal structure reverting back to the α phase at pressures below ~9 GPa at room temperature, and at a higher pressure at elevated temperatures. Based on our data, we estimate the Ti-6Al-4V α–β–ω triple point to occur at ~900 K and 30 GPa, in good agreement with our calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of Nanoscale Phase Stability Reversals in Titanium Oxide Polymorphs

We have monitored the hydrothermal crystallization of titania nanoparticles by in situ X-ray diffraction (XRD). Using the refined average structures from the XRD measurements, we calculated potential energy variations with particle size on periodic bulk structures using density functional theory (DFT). These variations cannot account for the enthalpy required to stabilize anatase relative to rutile. Thus, the hypothesis that the strain of the surface structure of nanoparticles accounts for the stabilization of anatase is not applicable to the growth of titania in water. DFT calculations on model nanoparticles do generate lower surface energies for anatase than for rutile that are large enough to explain the stability reversal in nanoparticles relative to the bulk phase. Rather than arising from two-dimensional surface structure alone, as previously thought, the total surface energies are critically dependent upon defects associated with edges and corners of nanocrystals at particle sizes ?3 nm (i.e., during the nucleation process). As the particles grow, the bulk free energy becomes relatively more important, causing rutile to become stable at larger particle sizes. This study quantifies for the first time the critical role of edge and vertex energies in determining the relative phase stabilities of TiO2 nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single phase melt processed powellite (Ba,Ca)MoO4 for the immobilization of Mo-rich nuclear waste

Cs is one of the more problematic fission product radionuclides to immobilize due to its high volatility at elevated temperatures, ability to form water soluble compounds, and its mobility in many host materials. The hollandite structure is a promising crystalline host for Cs immobilization and has been traditionally fabricated by solid state sintering methods. This study presents the structure and performance of Ba{sub 1.0}Cs{sub 0.3}A{sub 2.3}Ti{sub 5.7}O{sub 16}; A = Cr, Fe, Al hollandite fabricated by melt processing. Melt processing is considered advantageous given that melters are currently in use for High Level Waste (HLW) vitrification in several countries. This work details the impact of Cr additions that were demonstrated to i) promote the formation of a Cs containing hollandite phase and ii) maintain the stability of the hollandite phase in reducing conditions anticipated for multiphase waste form processing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Discovery of a metastable Al{sub 20}Sm{sub 4} phase

We present an efficient genetic algorithm, integrated with experimental diffraction data, to solve a nanoscale metastable Al{sub 20}Sm{sub 4} phase that evolves during crystallization of an amorphous magnetron sputtered Al{sub 90}Sm{sub 10} alloy. The excellent match between calculated and experimental X-ray diffraction patterns confirms an accurate description of this metastable phase. Molecular dynamic simulations of crystal growth from the liquid phase predict the formation of disordered defects in the devitrified crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser Phase Errors in Seeded Free Electron Lasers

Harmonic seeding of free electron lasers has attracted significant attention as a method for producing transform-limited pulses in the soft x-ray region. Harmonic multiplication schemes extend seeding to shorter wavelengths, but also amplify the spectral phase errors of the initial seed laser, and may degrade the pulse quality and impede production of transform-limited pulses. In this paper we consider the effect of seed laser phase errors in high gain harmonic generation and echo-enabled harmonic generation. We use simulations to confirm analytical results for the case of linearly chirped seed lasers, and extend the results for arbitrary seed laser envelope and phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase-Locked Loop Noise Reduction via Phase Detector Implementation for Single-Phase Systems

A crucial component of grid-connected converters is the phase-locked loop (PLL) control subsystem that tracks the grid voltage's frequency and phase angle. Therefore, accurate fast-responding PLLs for control and protection purposes are required to provide these measurements. This paper proposes a novel feedback mechanism for single-phase PLL phase detectors using the estimated phase angle. Ripple noise appearing in the estimated frequency, most commonly the second harmonic under phase-lock conditions, is reduced or eliminated without the use of low-pass filters, which can cause delays to occur and limits the overall performance of the PLL response to dynamic changes in the system. The proposed method has the capability to eliminate the noise ripple entirely and, under extreme line distortion conditions, can reduce the ripple by at least half. Other modifications implemented through frequency feedback are shown to decrease the settling time of the PLL up to 50%. Mathematical analyses with the simulated and experimental results are provided to confirm the validity of the proposed methods.

42 ENGINEERING↗

Comparison of three-phase modulation with two-phase and four-phase modulation

For a constant added noise density at high signal-to-noise ratios and for the same error rate, three-phase PSK requires about 0.75 dB less energy per bit than two-phase or four-phase PSK. However, at very low signal-to-noise ratios, three-phase PSK requires about 0.74 dB more energy per bit of channel capacity than two-phase or four-phase PSK.

Pierce, J. R.↗

Phase field simulation of grain size effects on the phase coexistence and magnetostrictive behavior near the ferromagnetic morphotropic phase boundary

The grain size effects on the phase coexistence and magnetostrictive response of Tb 1-x Dy x Fe 2 polycrystals near the ferromagnetic morphotropic phase boundary (MPB) are revealed through phase-field modeling. It shows that phase coexistence is a universal phenomenon in polycrystals for both ferromagnetic and ferroelectric MPB and that the range of compositions for phase coexistence increases with decreasing grain sizes. A large, reversible, and anhysteretic magnetostrictive response at low external fields is also found in the fine-grained polycrystals around the ferromagnetic MPB, which offers us a route to developing nanocrystalline magnetostrictive materials.

42 ENGINEERING↗

Stripe Domains and First Order Phase Transition in the Vortex Matter of Anisotropic High-temperature Superconductors

We report the direct imaging of a novel modulated flux striped domain phase in a nearly twin-free YBCO crystal. These domains arise from instabilities in the vortex structure within a narrow region of tilted magnetic fields at small angles from the in-plane direction. By comparing the experimental and theoretically derived vortex phase diagrams we infer that the stripe domains emerge from a first-order phase transition of the vortex structure. The size of domains containing vortices of certain orientations is controlled by the balance between the vortex stray field energy and the positive energy of the domain boundaries. Our results confirm the existence of the kinked vortex chain phase in an anisotropic high temperature superconductor and reveal a sharp transition in the state of this phase resulting in regular vortex domains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗