Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

In-situ measurement of phase transformation kinetics in austempered ductile iron

Austempered ductile iron (ADI) alloyed with 0.42% Mn and 0.72% Cu was heat treated in a mirror furnace and the phase transitions were studied in-situ by neutron diffraction. The heat treatment consisted of austenitisation at 920 °C and isothermal austempering at 400 °C, 350 °C and 300 °C, respectively. Due to the growth of ferrite platelets, the austenite content decreases rapidly at all temperatures within the first 15–20 min and reaches a stable plateau after 35 min (400 °C) to 80 min (300 °C). The carbon content of the residual austenite, which was monitored and characterised by the change of the lattice parameter, increases up to 1.6 wt.% caused by redistribution from the newly formed ferrite. While at higher austempering temperatures this takes place almost parallel to the phase transformation, at 300 °C the redistribution of carbon to austenite lags behind considerably. Furthermore the neutron data revealed an austenite peak asymmetry during austempering which is attributed to successive phase transformation. It results temporarily in two fractions of austenite, an initial low-carbon and an enriched high-carbon modification. - Highlights: • The heat treatment of ADI was studied in detail by in-situ neutron diffraction. • The phase fractions were monitored and evaluated quantitatively. • The austenite carbon content increased up to 1.6 wt.% during austempering. • Peak asymmetries indicate two austenite fractions during highest transformation rates.

36 MATERIALS SCIENCE↗

Simulations relevant to the beam instability in the foreshock

The results presently obtained from two-dimensional simulations of the reactive instability for Maxwellian beams and cutoff distributions are noted to be consistent with recent suggestions that electrons backstreaming into earth's foreshock have steep-sided cutoff distributions, which are initially unstable to the reactive instability, and that the back-reaction to the wave growth causes the instability to pass into its kinetic phase. It is demonstrated that the reactive instability is a bunching instability, and that the reactive instability saturates and passes over into the kinetic phase by particle trapping.

Cairns, I. H.↗

The Influence of Cation Substitution on the Kinetics of Phase Transitions in Crystals of (K,NH{sub 4}){sub 3}H(SO{sub 4}){sub 2} Solid Solutions

The structure of (K{sub 0.967}(NH{sub 4}){sub 0.033}){sub 3}H(SO{sub 4}){sub 2} crystals, belonging to the K{sub 3}H(SO{sub 4}){sub 2}–(NH{sub 4}){sub 3}H(SO{sub 4}){sub 2}–H{sub 2}O salt system, has been investigated by X-ray structural analysis. The room-temperature characteristics of the atomic structure of these crystals are found to be as follows: sp. gr. C2/c, Z = 4, a = 14.7025(4) Å, b = 5.6859(2) Å, c = 9.7885(3) Å, and R/wR = 0.021/0.030%. The thermal and optical properties of (K,NH{sub 4}){sub 3}H(SO{sub 4}){sub 2} and K{sub 3}H(SO{sub 4}){sub 2} single crystals have been investigated and compared in a temperature range of 295–500 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time-Resolved Phase Transition Kinetics STL-03-15, Year 1 of 1

Presentation describes shock compression experiments performed to measure the dynamic reflectance of light from the surface of tin samples shocked through the β to BCT (body centered tetragonal) solid-solid polymorphic phase transition near 9 GPa, using a technique that extrapolates the low- and high-pressure behavior of reflectance through the mixed phase, allowing researchers to infer the value of the mixed-phase fraction.

36 MATERIALS SCIENCE↗

Comparative study of crystallization kinetics and phase segregation of triple cation and methylammonium lead iodide perovskites on moisture probing using synchrotron X-ray based radiation

3D mixed perovskites have achieved substantial success in boosting solar cell efficiency, but the complicated perovskite crystal formation pathway remains mysterious. Here we present detailed crystallization kinetics of mixed perovskites FA 0.83 MA 0.17 Pb(I 0.83 Br 0.17 ) 3 , where FA is formamidinium and MA is methylammonium, with the addition of Cs + to form a triple cation perovskite (3-CAT), in a comparison with the perovskite building block MAPbI 3 (MAPI) via static grazing-incidence wide-angle X-ray scattering (GIWAXS) and micro-diffraction measurements. Spin-coated films produced α-perovskite peaks with no PbI 2 or δ-intermediate phases, which was a promising result for the 3-CAT perovskite from micro-diffraction measurements. However, the 3-CAT did not remain stable on probing with varied relative humidity (RH) conditions as segregation back to the δ-intermediate and PbI 2 phase after 10 s of exposure to an RH value of 11% was found to occur from the GIWAXS results. When RH levels were elevated to over 100%, segregation peaks of PbI 2 and δ-intermediate (2H, 4H and 6H) became conspicuous as the α-phase intensity diminished, unlike for MAPI that remains relatively stable. The possible cause of this is hydrophilic bonds that form between the 3-CAT crystals and the small annealing window of the best composition perovskite (5% Cs + ) film.

Shatsala, Miller (ORCID:0009000927230192)↗

Thermodynamics and Kinetics of Phase Transformations in Energy Materials (Final Report)

The primary goal of this program is to develop computational tools and methodology for enabling a shift from empirical trial-and-error driven materials discovery towards data and information technology driven design of materials with targeted functional properties. Both thermodynamic and kinetic factors need to be taken into account when designing new materials. Thermodynamics sets the necessary-but-not-sufficient conditions for the suitability of a particular material in a given application, while the kinetics controls the rates of microscopic processes and hence the performance in energy applications (e.g., power in energy storage, conversion efficiencies in solar cells and thermoelectrics, chemical activity in catalysis). The complexity of these phenomena makes computational design difficult, not least due to the lack of suitable theoretical methods and computational tools. To address these needs, we develop systematic, quantitatively accurate first-principles methods to address two important problems: (i) predict and optimize the thermodynamics of materials over a large composition and structure space, and (ii) model kinetic processes such as mass and heat transport in crystalline solids under non-equilibrium conditions. These tasks are addressed by combining high-throughput computation with automatic construction of accurate lattice models using mathematically rigorous methods of information theory, such as compressive sensing and Bayesian inference.

36 MATERIALS SCIENCE↗

Kinetics of phase transformation in glass forming systems

The objectives of this research were to (1) develop computer models for realistic simulations of nucleation and crystal growth in glasses, which would also have the flexibility to accomodate the different variables related to sample characteristics and experimental conditions, and (2) design and perform nucleation and crystallization experiments using calorimetric measurements, such as differential scanning calorimetry (DSC) and differential thermal analysis (DTA) to verify these models. The variables related to sample characteristics mentioned in (1) above include size of the glass particles, nucleating agents, and the relative concentration of the surface and internal nuclei. A change in any of these variables changes the mode of the transformation (crystallization) kinetics. A variation in experimental conditions includes isothermal and nonisothermal DSC/DTA measurements. This research would lead to develop improved, more realistic methods for analysis of the DSC/DTA peak profiles to determine the kinetic parameters for nucleation and crystal growth as well as to assess the relative merits and demerits of the thermoanalytical models presently used to study the phase transformation in glasses.

Ray, Chandra S.↗

A Platform-Independent X-ray Diffraction Diagnostic for Phase Transition Kinetics in Traditional and Synthetic Microstructure Materials (LDRD Project 213088 Final Report)

Pulsed-power generators using the magnetic loading technique are able to produce well-controlled continuous ramp compression of condensed matter for high-pressure equation-of-state studies. X-ray diffraction (XRD) data from dynamically compressed samples provide direct measurements of the elastic compression of the crystal lattice, onset of plastic flow, strength-strain rate dependence, structural phase transitions, and density of crystal defects such as dislocations. Here, we present a cost effective, compact X-ray source for XRD measurements on pulsed-power-driven ramp-loaded samples. This combination of magnetically-driven ramp compression of materials with single, short-pulse XRD diagnostic will be a powerful capability for the dynamic materials community. The success in fielding this new XRD diagnostic dramatically improves our predictive capability and understanding of rate-dependent behavior at or near phase transition. As Sandia plans the next-generation pulse-power driver platform, a key element needed to deliver new state-of-the-art experiments will be having the necessary diagnostic tools to probe new regimes and phenomena. These diagnostics need to be as versatile, compact, and portable as they are powerful. The development of a platform-independent XRD diagnostic gives Sandia researchers a new window to study the microstructure and phase dynamics of materials under load. This project has paved the way for phase transition research in a variety of materials with mission interest.

36 MATERIALS SCIENCE↗

Phase transition kinetics revealed by in situ x-ray diffraction in laser-heated dynamic diamond anvil cells

We report successful coupling of dynamic loading in a diamond anvil cell and stable laser heating, which enables compression rates up to 500 GPa/s along high-temperature isotherms. Dynamic loading in a diamond-anvil cell allows exploration of a wider range of pathways in the pressure-temperature space compared to conventional dynamic compression techniques. By x-ray diffraction, we are able to characterize and monitor the structural transitions with the appropriate time resolution i.e., millisecond timescales. Using this method, we investigate the γ − ε phase transition of iron under dynamic compression, reaching compression rates of hundreds of GPa/s and temperatures of 2000 K. Our results demonstrate a distinct response of the γ − ε and α − ε transitions to the high compression rates achieved, possibly due to the different transition mechanisms. These findings open up new avenues to study tailored dynamic compression pathways in the pressure-temperature space and highlight the potential of this platform to capture kinetic effects (over ms time scales) in a diamond anvil cell. Published by the American Physical Society 2024

Ricks, Matthew (ORCID:000000015315612X)↗

Evaporation Kinetics and Phase of Laboratory and Ambient Secondary Organic Aerosol

Field measurements of secondary organic aerosol (SOA) find higher mass loads than predicted by models, sparking intense efforts to find additional SOA sources but leaving the assumption of rapid SOA evaporation unchallenged. We characterized room-temperature evaporation of pure SOA and SOA formed in the presence of spectator organic vapors with and without aging. We find that it takes ~24 hrs for pure SOA particles to evaporate 75% of their mass, which is in sharp contrast to the ~10 minutes timescales predicted by models. The presence of spectator organic vapors and aging dramatically reduces the evaporation, and in some cases nearly stops it. For all cases, SOA evaporation behavior is size independent and does not follow the liquid droplet evaporation kinetics assumed by models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calculating Free Energy Changes in Continuum Solvation Models

We recently showed for a large dataset of pK a s and reduction potentials that free energies calculated directly within the SMD continuum model compares very well with corresponding thermodynamic cycle calculations in both aqueous and organic solvents (Phys. Chem. Chem. Phys. 2015, 17, 2859). In this paper, we significantly expand the scope of our study to examine the suitability of this approach for the calculation of general solution phase kinetics and thermodynamics, in conjunction with several commonly used solvation models (SMDM062X, SMD-HF, CPCM-UAKS, and CPCM-UAHF) for a broad range of systems and reaction types. This includes cluster-continuum schemes for pK a calculations, as well as various neutral, radical and ionic reactions such as enolization, cycloaddition, hydrogen and chlorine atom transfer, and bimolecular SN2 and E2 reactions. On the basis of this benchmarking study, we conclude that the accuracies of both approaches are generally very similar – the mean errors for Gibbs free energy changes of neutral and ionic reactions are approximately 5 kJ mol -1 and 25 kJ mol -1 respectively. In systems where there are significant structural changes due to solvation, as is the case for certain ionic transition states and amino acids, the direct approach generally afford free energy changes that are in better agreement with experiment. The results indicate that when appropriate combinations of electronic structure methods are employed, the direct approach provides a reliable alternative to the thermodynamic cycle calculations of solution phase kinetics and thermodynamics across a broad range of organic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A mechanistic modeling framework for gas-phase adsorption kinetics and fixed-bed transport

Adsorption is a complex physicochemical process involving interparticle transport, interphase mass-transfer, intraparticle diffusion, and surface reactions. Although the exact description of the adsorption process will inevitably vary from system to system, it will always be governed by those primary mechanisms. Thus, by devising a model framework that can inherently include those mechanisms, it would be possible to create a modeling platform on which many different adsorption problems could be solved numerically. In order to accomplish this task, a generalized 1-D conservation law model was created to include the necessary mechanisms of adsorption on several different geometrical domains. Specific model applications for adsorption were developed under that framework and validated using experimental data available in literature or obtained in this work. This modeling platform makes it easier to model various adsorption problems and develop new adsorption models because of the common treatment of the mathematics governing the physical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗