Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “payload assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

STS-31: Hubble Discovery Payload Doors Closing

The primary objective of mission STS-31 was to deploy the Hubble Space Telescope. The videotape shows the Hubble Space Telescope in Discovery's payload bay in the Vertical Assembly Building (VAB) clean room, while the payload bay's doors slowly close.

Source record↗

Lamellar crystalline self-assembly behaviour and solid lipid nanoparticles of a palmityl prodrug analogue of Capecitabine—A chemotherapy agent

An amphiphile prodrug, 5'-deoxy-5-fluoro-N 4 -(palmityloxycarbonyl) cytidine or 5'-deoxy-5-fluoro-N 4 -(hexadecanaloxycarbonyl) cytidine (5-FCPal), consisting of the same head group as the commercially available chemotherapeutic agent Capecitabine, linked to a palmityl hydrocarbon chain via a carbamate bond is reported. Thermal analysis of this prodrug indicates that it melts at ~115 °C followed quickly by degradation beginning at ~120 °C. The neat solid 5-FCPal amphiphile acquires a lamellar crystalline arrangement with a d-spacing of 28.6 ± 0.3 Å, indicating interdigitation of the hydrocarbon chains. Under aqueous conditions, solid 5-FCPal is non-swelling and no lyotropic liquid crystalline phase formation is observed. In order to assess the in vitro toxicity and in vivo efficacy in colloidal form, solid lipid nanoparticles (SLNs) with an average size of ~700 nm were produced via high pressure homogenization. The in vitro toxicity of the 5-FCPal SLNs against several different cancer and normal cell types was assessed over a 48 h period, and IC 50 values were comparable to those observed for Capecitabine. The in vivo efficacy of the 5-FCPal SLNs was then assessed against the highly aggressive mouse 4T1 breast cancer model. To do so, the prodrug SLNs were administered orally at 3 different dosages (0.1, 0.25, 0.5 mmol/mouse/day) and compared to Capecitabine delivered at the same dosages. After 21 days of receiving the treatments, the 0.5 mmol dose of 5-FCPal exhibited the smallest average tumour volume. Since 5-FCPal is activated in a similar manner to Capecitabine via a 3 step enzymatic pathway with the final step occurring preferentially at the tumour site, formulation of the prodrug into SLNs combines the advantage of selective, localized activation with the sustained release properties of nanostructured amphiphile self-assembly and multiple payload materials thereby potentially creating a more effective anticancer agent.

60 APPLIED LIFE SCIENCES↗

The space station - An overview of the design process

The design factors being considered in the NASA space-station development program are summarized. The currently envisioned mission requirements are listed, and the system architecture is defined as a core station, mission-dedicated elements, and supporting equipment such as an orbit maneuvering vehicle. System design factors discussed include orbit selection, contamination control, autonomy, system safety, technology implementation, long life, reliability and maintainability, and cost; subsystem design factors include structural considerations, electrical power, environmental control and life support, data management, communications and tracking, onboard propulsion, habitability, and crew support. Configurational design is seen as driven by a number of factors, primarily the need to fit all components into the Shuttle payload bay for assembly in LEO by the Shuttle crew.

Covington, C.↗

Satellite Servicing Technology Development Missions

A new capability regarding the U.S. space efforts will be related to the servicing of satellites in orbit utilizing first-generation space station as the collection point or base for Shuttle-delivered payloads. Orbital maneuvering vehicles could move payloads or spacecraft assembled at the Shuttle/space station terminus to other earth orbit locations. It is assumed that such a capability will be initially available in the early 1990's. The benefits provided by satellite servicing in orbit are discussed, taking into account extended satellite lifetimes, lower acquisition cost, improved satellite performance, the possibility to change a satellite's mission, optimized science, and higher satellite reliability. The requirements for Satellite Servicing Technology Development Missions (TDMs) are considered. It is found that existing technology is insufficient, in various areas, to perform the servicing operations. A list is provided of critical technologies which must be developed.

Middleton, R.↗

Space Station user Servicing System architecture and operational aspects

The structure of the Space Station Servicing System architecture, operational aspects of the system, and the potential evolution of the servicing capabilities to accomodate a variety of missions are disscussed. Services to be performed include replacement or repair of failed modules, subsystems or parts, replacement or upgrading of spacecraft or instrument subsystems, replacement of limited lifetime subsystems or components, replenishment of consumables, and assembly of attached payloads and instruments. Elements of the system discussed include intravehicular servicing, the flight telerobotic servicer, and the mobile servicing center. Ground, preservicing, extravehicular and intravehicular servicing, and postservicing operations are examined. Also, a typical mission scenario for mature servicing operations is given.

Cline, Helmut P.↗

Robotics program at the NASA Goddard Space Flight Center

The NASA Goddard telerobotic program is structured to increase the scope and efficiency of what man can accomplish in space through the use of robotics. The main focus is to service Space Station Freedom and its payloads, but robotic assembly of Space Station Freedom and platforms is also anticipated. The approach being taken to achieve this by telerobotics, where manipulators can be controlled by human operators or computer programs. The Goddard Space Flight Center (GSFC) has the responsability to develop the Flight Telerobotic Servicer (FTS) for Space Station Freedom. The current plan at GSFC in support of telerobotics for Space Station Freedom and the in-orbit servicing of platforms are reviewed. Plans for ground demonstrations involving the use of an engineering test bed and an operational facility are discussed.

Ollendorf, Stanford↗

In-space technology experiments - Prerequisite for missions of the future

Experience with the Shuttle and free-flying satellites as technology test beds has shown the feasibility and desirability of using space assets as facilities for technology development. Thus, with the arrival of the Space Station Freedom era, technologists will be ready for an accessible engineering facility in space, particularly to support technology development for manned space exploration. As the 21st century is approached, virtually every flight to the Space Station Freedom will carry one or more research, technology and engineering experiments. The experiments planned will utilize both the pressurized volume and the external attachment facilities. A unique class of experiments will use the Space Station itself as an experimental test bed. Based upon recent examination of possible Space Station assembly sequences, technology payloads may utilize upwards of 20 percent of available resources.

Harris, Leonard A.↗

Endeavour's arduous maiden voyage - STS-49

The Space Shuttle Orbiter Endeavour undertook its maiden mission (STS-49) on May 7, 1992, exactly one year after its arrival at the Kennedy Space Center, in order to attach a perigee 'kick-motor' to the Intelsat-VI communications satellite which would carry it from the LEO where it was marooned to GEO. Endeavour's secondary payload was the Assembly of Space Station by Extravehicular Methods experiment. A log is here presented of STS-49.

Schuiling, Roelof↗

STS-114: Discovery Shuttle Processing Overview Briefing

This video of a briefing to representatives from the national media took the form of a slide show presentation by Jon Cowart, Manager of the Resident Office at Johnson Space Center. The presentation was an overview of ground maintainance facilities and procedures at Kennedy Space Center used to support Space Shuttle operations. The photographs in the slide show: Shuttle ground transport, maintenance, computers, and payloads, the Vehicle Assembly Building, ground operations, launch operations, crew boarding, liftoff, Pad A and Pad B, Solid Rocket Motor retrieval, crew procedures on-orbit, and landing. After the presentation is a brief question and answer session, in which reporters ask Cowart about Shuttle readiness, changes in Shuttle operations made for the Return to Flight, and how weather affects Shuttle operations.

Source record↗

Fluid Quick Disconnects - ISS Lessons Learned

The International Space Station has many fluid systems on the United States On-orbit Segment supporting thermal control, life support, extravehicular activities and payloads. To facilitate assembly and maintenance, fluid quick disconnect (QD) fittings are used throughout these systems for both internal pressurized modules and for external systems exposed to space. In the years since full scale development began on these QDs, a number of design and performance issues have surfaced and required substantial program funds and activity to rectify. This paper is intended to describe the most significant of these issues, their resolutions, and the lessons learned from the ISS experience.

Bond, Timothy A.↗

A Human Factor Analysis to Mitigate Fall Risk Factors in an Aerospace Environment

This slide presentation reviews the study done to quanitfy the risks from falls from three locations (i.e., Shuttle Landing Facility Launch Complex Payloads and Vehicle Assembly Building) at the Kennedy Space Center. The Analytical Hierarchy Process (AHP) is reviewed and the mathematical model developed is detailed.

Ware, Joylene H.↗

A Study of Solder Alloy Ductility for Cryogenic Applications

For aerospace applications it is important to understand the mechanical performance of components at the extreme temperature conditions seen in service. For solder alloys used in microelectronics, cryogenic temperatures can prove problematic. At low temperatures Sn-based solders undergo a ductile to brittle transition that leads to brittle cracks, which can result in catastrophic failure of electronic components, assemblies and spacecraft payloads. As industrial processes begin to move away from Pb-Sn solder, it is even more critical to characterize the behavior of alternative Sn-based solders. Here we report on initial investigations using a modified Charpy test apparatus to characterize the ductile to brittle transformation temperature of nine different solder systems.

solders↗

Analysis of a magnetically suspended, high-performance instrument pointing system

This paper describes a highly accurate auxiliary instrument pointing system which can provide fine pointing for a variety of solar-, stellar-, and Earth-viewing scientific instruments during extended space shuttle orbital missions. This system, called the Annular Suspension and Pointing System (ASPS), consists of pointing assemblies for coarse and vernier pointing. The 'coarse' assembly is attached to the spacecraft (e.g., the space shuttle) and consists of an elevation gimbal and a lateral gimbal to provide coarse pointing. The vernier pointing assembly consists of the payload instrument mounted on a plate around which is attached a continuous annular rim. The vernier assembly is suspended in the lateral gimbal using magnetic actuators which provide rim suspension forces and fine pointing torques. A detailed linearized mathematical model is developed for the ASPS/space shuttle system, and control laws and payload attitude state estimators are designed. Statistical pointing performance is predicted in the presence of stochastic disturbances such as crew motion, sensor noise, and actuator noise.

Joshi, S. M.↗

Core–Shell Structure and Aggregation Number of Micelles Composed of Amphiphilic Block Copolymers and Amphiphilic Heterografted Polymer Brushes Determined by Small-Angle X-ray Scattering

A large group of functional nanomaterials employed in biomedical applications, including targeted drug delivery, relies on amphiphilic polymers to encapsulate therapeutic payloads via self-assembly processes. Knowledge of the micelle structures will provide critical insights into design of polymeric drug delivery systems. Core–shell micelles composed of linear diblock copolymers poly(ethylene glycol)-b-poly(caprolactone) (PEG-b-PCL), poly(ethylene oxide)-b-poly(lactic acid) (PEG-b-PLA), as well as a heterografted brush consisting of a poly(glycidyl methacrylate) backbone with PEG and PLA branches (PGMA-g-PEG/PLA) were characterized by dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) measurements to gain structural information regarding the particle morphology, core–shell size, and aggregation number. The structural information at this quasi-equilibrium state can also be used as a reference when studying the kinetics of polymer micellization.

36 MATERIALS SCIENCE↗

Expedite the Processing of Unpressurized Payloads to the International Space Station Using the ExPRESS Pallet

The Expedite the PRocessing of Experiments to Space Station (ExPRESS) Pallet will be used as an experiment platform for external/unpressurized payloads to be flown aboard the International Space Station (ISS). The purpose of the ExPRESS Pallet is to provide an easy access to the ISS for Scientific Investigators that require an external platform for their experiment hardware. As the name of the ExPRESS Pallet implies, the objective of the ExPRESS program is to provide a simplified integration process in a short time period (24 months) for payloads to be flown on the ISS. The ExPRESS Pallet provides unique opportunities for research across many science disciplines, including earth observation, communications, solar and deep space viewing, and long-term exposure. The ExPRESS Pallet provides access to Ram, Wake, Nadir, Zenith and Earth Limb for viewing and exposure to the space environment. The ExPRESS Pallet will provide standard physical payload interfaces, and a standard integration template. The ExPS consists of the Pallet structure, payload Adapters, a subsystem assembly that includes data controller, power distribution and conversion, and Extra Vehicular Robotics compatibility. The ExPRESS Pallet provides the capability to changeout payloads on-orbit via the ExPRESS Pallet Adapter (ExPA). The following paragraphs will describe the Services and Accommodations available to the Payload developers by the ExPRESS Pallet and a brief description of the Integration process. More detailed information on the ExPRESS Pallet can be found in the ExPRESS Pallet Payload Accommodations Handbook, SSP 52000-PAH-EPP.

Bacskay, Allen S.↗

Payload operation television system

The TV system assembled is intended for laboratory experimentation which would develop operational techniques and lead to the design of space-borne TV equipment whose purpose would be to assist the astronaut-operator aboard a space station to load payload components. The TV system assembled for this program is a black and white, monocular, high performance system. The equipment consists principally of a good quality TV camera capable of high resolving power; a TV monitor; a sync generator for driving camera and monitor; and two pan/tilt units which are remotely controlled by the operator. One pan/tilt unit provides control of the pointing of the camera, the other similarly controls the position of a simulated payload.

Source record↗

Space Station accommodation of attached payloads

The Attached Payload Accommodation Equipment (APAE), which provides the structure to attach payloads to the Space Station truss assembly, to access Space Station resources, and to orient payloads relative to specified targets, is described. The main subelements of the APAE include a station interface adapter, payload interface adapter, subsystem support module, contamination monitoring system, payload pointing system, and attitude determination system. These components can be combined to provide accommodations for small single payloads, small multiple payloads, large self-supported payloads, carrier-mounted payloads, and articulated payloads. The discussion also covers the power, thermal, and data/communications subsystems and operations.

Browning, Ronald K.↗