Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameter compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-pressure structural systematics of dysprosium metal compressed in a neon pressure medium to 182 GPa

Here we present an experimental and theoretical study of dysprosium metal compressed in the soft pressure transmitting medium Ne up to 182 and 300 GPa, respectively. Angle-dispersive x-ray powder diffraction data from each of the high-pressure polymorphs shows anisotropic compression behavior indicating changes to the electron density distribution throughout its polymorphic landscape. We compare the monoclinic (mC4) and orthorhombic (oF16) structures for the collapsed structure for Dy above 82 GPa and verify that the oF16 structure offers a better fit to our data than the previously reported mC4 structure. Further, we have found that the oF16 structure undergoes similar anisotropic compression of its lattice parameters, with a turning point above 160 GPa; suggesting a potential phase transition at pressures much higher than achieved in this study. Density functional theory calculations show the likely candidate for this new high-pressure phase is the isosymmetric oF8 structure, which is predicted to be lower in energy than the oF16 structure above 275 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

DME-Propane Ignition Delay Time Measurements at Mixing Controlled Compression Ignition Engine-Relevant Conditions

The blend of dimethyl ether (DME, CH 3 OCH 3 ) and propane (C 3 H 8 ) is a potentially renewable fuel mixture that has the potential to replace diesel in compression ignition engines. The combination can potentially reduce particulate and greenhouse gas emissions compared to a conventional diesel engine operating under similar conditions. However, detailed conceptual and simulation studies must be conducted before adopting a new fuel on a compression ignition engine. For these simulations, accurate chemical kinetic models are necessary. However, the validity of chemical kinetic mechanisms in the literature is unknown for mixing controlled compression ignition (MCCI) engine operating conditions. Hence, in this work, we studied the ignition of dimethyl ether (DME) and propane blends in a shock tube at MCCI engine conditions. Ignition delay time (IDT) data was collected behind the reflected shock for DME-propane mixtures for heavy-duty compression ignition (CI) engine parameters. Undiluted experiments spanning temperatures of 700 to 1100 K and pressures of 55 to 84 bar for various blends (100% CH 3 OCH 3 / 0% C 3 H 8, 100% C 3 H 8 / 0% CH 3 OCH 3 , 60% CH 3 OCH 3 / 40% C 3 H 8 ) of DME and propane were combusted in synthetic air (21% O 2 / 79% N 2 ). Some experiments were conducted at higher pressures (90-120 bar) to understand model performance at these conditions. Comparisons of IDT were made with the predictions of recent chemical kinetic mechanisms for DME-propane mixture, including the Aramco3.0, NUIG, and Dames et al. mechanisms. All mechanisms overpredicted IDT compared to experimental values. Sensitivity analysis was conducted with Dames et al. model, and critical reactions sensitive to IDT of DME-propane mixture near 100 bar are outlined.

Mohammed, Zuhayr Pasha↗
NASA NTRS1975

Residual thermal stresses in a solid sphere cast from a thermosetting material

Expressions are developed for the residual thermal stresses in a solid sphere cast from a chemically hardening thermosetting material in a rigid spherical mold. The description of the heat generation rate and temperature variation is derived from a first-order chemical reaction. Solidification is described by the continuous transformation of the material from an inviscid liquidlike state into an elastic solid, with intermediate properties determined by the degree of chemical reaction. Residual stress components are obtained as functions of the parameters of the hardening process and the properties of the hardening material. Variation of the residual stresses with a nondimensionalized reaction rate parameter and the relative compressibility of the hardened material is discussed in detail.

Levitsky, M.↗
NASA NTRS1985

A Leaky Waveguide Model for MHD Wave Driven Winds from Coronal Holes

Magnetohydrodynamic (MHD) waves, driven by the large scale convective motions of the photosphere are suggested as a possible source of additional acceleration for the stellar wind. Most of the turbulent power in a coronal hole is carried by MHD waves with periods of a few hundred seconds or longer. This is evident from direct observations of turbulence in the solar photosphere, as well as in situ observations of turbulence in the solar wind. But waves with periods this long have wavelengths which are typically as large as the transverse scale of the coronal hole flux tube itself. For these waves boundary effects are important and the coronal hole must be treated as a waveguide. The propagation of MHD waves using this waveguide approach is discussed. The simple model presented demonstrates that coronal holes can act as waveguides for MHD waves. For typical solar parameters the waves are compressible and can generate a wave tensile force which tends to cancel at least part of the wave pressure force. This effect tends to decrease the efficiency of MHD wave acceleration.

Davila, J. M.↗
NASA NTRS1988

Spatial stability of a compressible mixing layer

Presented are the results of a study of the inviscid spatial stability of a parallel compressible mixing layer. The parameters of this study are the Mach number of the moving stream, the ratio of the temperature of the stationary stream to that of the moving stream, the frequency and the direction of propagation of the disturbance wave. Stability characteristics of the flow as a function of these parameters are given. It is shown that if the Mach number exceeds a critical value there are always two groups of unstable waves. One of these groups is fast with phase speeds greater than 1/2, and the other is slow with speeds less than 1/2. Phase speeds for the neutral and unstable modes are given, as well as growth rates for the unstable modes. It is shown that three dimensional modes have the same general behavior as the two dimensional modes but with higher growth rates over some range of propagation direction. Finally, a group of very low frequency unstable modes was found for sufficiently large Mach numbers. These modes have very low phase speeds but large growth rates.

Jackson, T. L.↗
NASA NTRS1989

Inviscid spatial stability of a compressible mixing layer

Presented are the results of a study of the inviscid spatial stability of a parallel compressible mixing layer. The parameters of this study are the Mach number of the moving stream, the ratio of the temperature of the stationary stream to that of the moving stream, the frequency and the direction of propagation of the disturbance wave. Stability characteristics of the flow as a function of these parameters are given. It is shown that if the Mach number exceeds a critical value there are always two groups of unstable waves. One of these groups is fast with phase speeds greater than 1/2, and the other is slow with speeds less than 1/2. Phase speeds for the neutral and unstable modes are given, as well as growth rates for the unstable modes. It is shown that three-dimensional modes have the same general behavior as the two-dimensional modes but with higher growth rates over some range of propagation direction. Finally, a group of very low frequency unstable modes was found for sufficiently large Mach numbers. These modes have very low phase speeds but large growth rates.

Jackson, T. L.↗
NASA NTRS1992

Stability and bifurcation of quasiparallel Alfven solitons

The inverse scattering transformation (IST) is used to study the one-parameter and two-parameter soliton families of the derivative nonlinear Schroedinger (DNLS) equation. The two-parameter soliton family is determined by the discrete complex eigenvalue spectrum of the Kaup-Newell scattering problem and the one-parameter soliton family corresponds to the discrete real eigenvalue spectrum. The structure of the IST is exploited to discuss the existence of discrete real eigenvalues and to prove their structural stability to perturbations of the initial conditions. Also, though the two-parameter soliton is structurally stable in general, it is shown that a perturbation of the initial conditions may change the two-parameter soliton into a degenerate soliton which, in turn, is structurally unstable. This degenerate, or double pole, soliton may bifurcate due to a perturbation of the initial conditions into a pair of one-parameter solitons. If the initial profile is on compact support, then this pair of one-parameter solitons must be compressive and rarefactive respectively. Finally, the Gelfand-Levitan equations appropriate for the double pole soliton are solved.

Hamilton, R. L.↗
DOE OSTI2024

SHOCK TUBE IGNITION STUDIES OF RENEWABLE DIESEL FUELS FOR MEDIUM AND HEAVY-DUTY TRANSPORTATION

Currently extensive research on alternative fuels is being conducted due to their increasing demand to reduce greenhouse emissions. One renewable fuel studied in this work is dimethyl ether (DME) blended with propane(C3H8) as a potential mixture for heavy-duty engines used in semi-trucks. The blend has the potential to drastically reduce particulate and greenhouse gas emissions compared to a conventional diesel engine operating under similar conditions. To develop the use of mixture, one must conduct detailed conceptual and simulation studies before progressing to detail studies in CFD, engine modifications, and live testing. For simulations, accurate high-fidelity chemical kinetic models are necessary. However, the validity of the chemical kinetic mechanism for operating conditions of a heavy-duty mixing-controlled compression (MCCI) engine was widely unknown until recent work presented here and published. In this work, we studied the ignition of DME and propane blends in a shock tube under MCCI engine conditions. Ignition delay time (IDT) gathered behind the reflected shock for DME-propane mixtures for heavy-duty compression ignition (CI) engine parameters. Testing was conducted for undiluted varieties spanning from temperatures of 700 to 1100 K at pressures ranging from 55 to 84 bar for various blends (100% CH3OCH3, 100% C3H8, 60% CH3OCH3/ 40% C3H8) of DME and propane were combusted in synthetic air (21% O2/ 79% N2). Several experiments were conducted at higher pressures (90-120 bar) to improve the model performance and accuracy. The ignition delay times (IDTs) were compared to recent mechanisms, including Aramco3.0, NUIG, and Dames et al. A common trend among the mechanisms was overpredicted experimental IDTs. Further studies were conducted by a sensitivity analysis using the Dames et al. model, and critical reactions sensitive to IDTs of DME-propane mixture near 60 bar are outlined. Chemical analysis was conducted on the NTC region to explain chemical kinetics which is critical for developing MCCI heavy duty engines.

Mohammed, Zuhayr Pasha↗
NASA NTRS1992

Lattice Boltzmann model for compressible fluids

A lattice Boltzmann model is derived which simulates compressible fluids. By choosing the parameters of the equilibrium distribution appropriately, the sound speed (which may be set arbitrarily low), bulk viscosity, and kinematic viscosity can be selected. This model simulates compressible flows and can include shocks. With a proper rescaling and zero-sound speed, this model simulates Burgers's equation. The viscosity determined by a Chapman-Enskog expansion compares well with that measured form simulations. The exact solutions of Burgers's equation on the unit circle are compared to solutions of lattice Boltzmann model finding reasonable agreement.

Alexander, F. J.↗
NASA NTRS1976

Real-time video compression algorithm for Hadamard transform processing

A real-time digital video processor using Hadamard transform techniques to reduce video bandwidth is described. The processor can be programmed with different parameters to investigate various algorithms for bandwidth compression. The processor is also adaptive in that it can select different parameter sets to tradeoff spatial resolution for temporal resolution in the regions of the picture that are moving. Algorithms used in programming the system are described along with results achieved at various levels of compression. The algorithms relate to spatial compression, temporal compression, and the adaptive selection of parameter sets.

Knauer, S. C.↗
NASA NTRS1989

Isothermal Equation Of State For Compressed Solids

Same equation with three adjustable parameters applies to different materials. Improved equation of state describes pressure on solid as function of relative volume at constant temperature. Even though types of interatomic interactions differ from one substance to another, form of equation determined primarily by overlap of electron wave functions during compression. Consequently, equation universal in sense it applies to variety of substances, including ionic, metallic, covalent, and rare-gas solids. Only three parameters needed to describe equation for given material.

Vinet, Pascal↗
DOE OSTI2020

UQ Toolkit v 2.0

The Uncertainty Quantification (UQ) Toolkit is a software library for the characterizaton and propagation of uncertainties in computational models. For the characterization of uncertainties, Bayesian inference tools are provided to infer uncertain model parameters, as well as Bayesian compressive sensing methods for discovering sparse representations of high-dimensional input-output response surfaces, and also Karhunen-Loève expansions for representing stochastic processes. Uncertain parameters are treated as random variables and represented with Polynomial Chaos expansions (PCEs). The library implements several spectral basis function types (e.g. Hermite basis functions in terms of Gaussian random variables or Legendre basis functions in terms of uniform random variables) that can be used to represent random variables with PCEs. For propagation of uncertainty, tools are provided to propagate PCEs that describe the input uncertainty through the computational model using either intrusive methods (Galerkin projection of equations onto basis functions) or non-intrusive methods (perform deterministic operation at sampled values of the random values and project the obtained results onto basis functions).

Safta, Cosmin↗
NASA NTRS1975

Real-time video compression algorithm for Hadamard transform processing

A real-time digital video processor using Hadamard transform techniques to reduce video bandwidth is described. The processor can be programmed with different parameters to investigate various algorithms for bandwidth compression. The processor is also adaptive in that it can select different parameter sets to trade off spatial resolution for temporal resolution in the regions of the picture that are moving. Algorithms used in programming the system are described along with results achieved at various levels of compression. The algorithms relate to spatial compression, temporal compression, and the adaptive selection of parameter sets.

Knauer, S. C.↗
DOE OSTI2023

Diagnosis of 3D magnetic field and mode composition in MHD turbulence with Y -parameter

ABSTRACT Magnetic fields are crucial in numerous astrophysical processes within the interstellar medium (ISM). However, the detailed determination of magnetic field geometry is notoriously challenging. Based on the modern magnetohydrodynamic (MHD) turbulence theory, we introduce a novel statistical technique, the ‘Y-parameter’, to decipher the magnetic field inclination in the ISM and identify dominant turbulence modes. The Y-parameter, calculated as the ratio of anisotropies of different Stokes parameter combinations, displays contrasting trends with the mean-field inclination angle in Alfvénic and compressible turbulence modes. A Y-parameter value around 1.5 ± 0.5 provide a statistical boundary to determine the dominant MHD turbulence modes. We have discovered specific correlations between the Y-parameter value and the inclination angle that unveil the dominant turbulence mode. This methodology, when applied to future radio polarization surveys such as LOFAR and SKA, promises to significantly enhance our knowledge of 3D magnetic field in the ISM and improve our understanding of interstellar turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2013

A Unified Model for Predicting the Open Hole Tensile and Compressive Strengths of Composite Laminates for Aerospace Applications

The open hole tensile and compressive strengths are important design parameters in qualifying fiber reinforced laminates for a wide variety of structural applications in the aerospace industry. In this paper, we present a unified model that can be used for predicting both these strengths (tensile and compressive) using the same set of coupon level, material property data. As a prelude to the unified computational model that follows, simplified approaches, referred to as "zeroth order", "first order", etc. with increasing levels of fidelity are first presented. The results and methods presented are practical and validated against experimental data. They serve as an introductory step in establishing a virtual building block, bottom-up approach to designing future airframe structures with composite materials. The results are useful for aerospace design engineers, particularly those that deal with airframe design.

Davidson, Paul↗
DOE OSTI2021

Strength models for stainless steel 304L alloys

This report provides nominal, weak and strong calibrations of Preston- Tonks-Wallace (PTW) plasticity model [1] parameters for stainless steel 304L alloys. The data sets shown indicate that for these alloys, the material’s prove- nance plays an important role in accurate characterization. First we provide a parameter set fit to compression-tested annealed samples, both quasistatic (QS) and split Hopkinson pressure bar (SHPB), from the MST-8 group at LANL within the last year. Then we compare simulations using the FLAG hydrocode [2], with this and other parameter sets, to data from a Taylor cylinder impact test performed within the same group around 2013.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Investigation of two and three parameter equations of state for cryogenic fluids

Two-phase flows are a common occurrence in cryogenic engines and an accurate evaluation of the heat-transfer coefficient in two-phase flow is of significant importance in their analysis and design. The thermodynamic equation of state plays a key role in calculating the heat transfer coefficient which is a function of thermodynamic and thermophysical properties. An investigation has been performed to study the performance of two- and three-parameter equations of state to calculate the compressibility factor of cryogenic fluids along the saturation loci. The two-parameter equations considered here are van der Waals and Redlich-Kwong equations of state. The three-parameter equation represented here is the generalized Benedict-Webb-Rubin (BWR) equation of Lee and Kesler. Results have been compared with the modified BWR equation of Bender and the extended BWR equations of Stewart. Seven cryogenic fluids have been tested; oxygen, hydrogen, helium, nitrogen, argon, neon, and air. The performance of the generalized BWR equation is poor for hydrogen and helium. The van der Waals equation is found to be inaccurate for air near the critical point. For helium, all three equations of state become inaccurate near the critical point.

Jenkins, Susan L.↗