SEARCH · Engineering Papers

Results for “oxygen evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Mixed-Metal Nickel–Iron Oxide Aerogels for Oxygen Evolution Reaction

Alkaline electrolyte membrane electrolyzers are a promising technology to efficiently produce clean hydrogen without the use of critical raw materials. At the heart of these electrolyzers are the electrocatalysts, which facilitate the cathodic and anodic reactions, with the latter oxygen evolution reaction (OER) being the most sluggish. In recent years, aerogels have become a very well-studied class of materials due to their unique properties, including very high surface area. Until now, aerogels have not been used to catalyze the OER by themselves but were mainly considered catalyst supports. Here, mixed-metal nickel–iron oxide aerogels were synthesized with a modified epoxide route synthesis and tested as OER catalysts. Depending on the Ni/Fe ratio, they show very high catalytic activity and low overpotential to reach 10 mA cm –2 (at η = 380 mV). This activity is beyond that of the existing state-of-the-art platinum group metal-free OER catalysts.

PGM free catalysts↗

DOE OSTI2026

Supramolecular Metal‐Organic Framework Electrocatalysts With Hydration‐Adaptive Gallery Expansion and Linker‐Mediated Distal Ni‐Co Cooperation Enable Framework‐Retentive Oxygen Evolution

Atomic‑level tailoring of electronic communication between spatially separated metal sites offers a route to accelerate multielectron electrocatalysis. We report Ni-TPTC, Co-TPTC, and heterobimetallic Ni-Co-TPTC supramolecular metal-organic frameworks (SMOFs) for the oxygen evolution reaction (OER) built from a terphenyl‑tetracarboxylate (TPTC) linker. Single-crystal X-ray diffraction of heterobimetallic Ni–Co–TPTC reveals trans-bis-aqua octahedral chains assembled into a π-stacked, hydrogen-bonded lattice and confirms retention of the parent architecture, while powder X-ray diffraction supports an isostructural Co analog. In 1.0 M KOH, Ni-Co-TPTC reaches 20 mA cm −2 at 350 mV and maintains operation at ∼60 mA cm −2 for 45 h with modest decay of the initial current. Time‑dependent ex situ diffraction shows dominant framework reflections with low‑angle shifts consistent with gallery dilation (d‑spacing ∼7.7 → ∼9.2 Å) during early operation, while Co K‑edge X‑ray absorption and microscopy reveal Co‑rich oxide/oxyhydroxide‑like domains at longer times that correlate with decay. X‑ray photoelectron spectroscopy, quantified by the Remote Binding‑Energy Differential, tracks composition‑dependent Ni-Co polarization, and DFT free‑energy analysis suggests that a model Ni-Co environment lowers the Co‑centered potential‑limiting step by ∼0.24 eV relative to the Co‑only framework. Furthermore, these results suggest that framework‑retentive expansion and distal Ni-Co coupling can drive OER activity before gradual deligation and oxide formation mark longer‑time degradation.

Supramolecular metal-organic frameworks (SMOFs)↗

DOE OSTI2023

Substrate-Driven Catalyst Reducibility for Oxygen Evolution and Its Effect on the Operation of Proton Exchange Membrane Water Electrolyzers

To increase the efficiency of hydrogen production by proton exchange membrane water electrolyzers (PEMWEs), the relationships between the specific activity and stability of the membrane–electrode assembly (MEA) must be clarified. Ir oxide electrodeposited on Ti substrate is used as an oxygen electrode, and its electronic properties and electrochemical behavior in PEMWE operation are observed. The electrode, fabricated through a facile strategy based on annealing in the air atmosphere, enhances the specific oxygen evolution reaction (OER) activity and stability in PEMWE operation. Furthermore, the electronic catalyst–substrate interactions associated with different reducibilities in the heteroatom system are studied. The morphology, electronic properties, and chemical state of the oxygen electrode are investigated through X-ray spectroscopy, microscopy techniques, and computational analyses. Thermal treatment of the catalyst-coated substrate decreases the bulk oxidation state of Ir and increases the surface oxidation state. According to the electrochemical and physical behavior analyses of PEMWEs, the oxygen content in the Ir oxide structure, which defines the OER activity and its stability, is influenced by the crystalline structure and formation of a stable interface between the catalyst and substrate. The outcomes can facilitate the development of strategies for enhancing the performance of PEMWEs and designing rational MEAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Lanthanum-Promoted Electrocatalyst for the Oxygen Evolution Reaction: Unique Catalyst or Oxide Deconstruction?

A conventional performance metric for electrocatalysts that promote the oxygen evolution reaction (OER) is the current density at a given overpotential. However, the assumption that increased current density at lower overpotentials indicates superior catalyst design is precarious for OER catalysts in the working environment, as the crystalline lattice is prone to deconstruction and amorphization, thus greatly increasing the concentration of catalytic active sites. We show this to be the case for La 3+ incorporation into Co 3 O 4 . Powder X-ray diffraction (PXRD), Raman spectroscopy and extended X-ray absorption fine structure (EXAFS) reveal smaller domain sizes with decreased long-range order and increased amorphization for La-modified Co 3 O 4 . This lattice deconstruction is exacerbated under the conditions of OER as indicated by operando spectroscopies. The overpotential for OER decreases with increasing La 3+ concentration, with maximum activity achieved at 17% La incorporation. HRTEM images and electron diffraction patterns clearly show the formation of an amorphous overlayer during OER catalysis that is accelerated with La 3+ addition. O 1s XPS spectra after OER show the loss of lattice-oxide and an increase in peak intensities associated with hydroxylated or defective O-atom environments, consistent with Co(O) x (OH) y species in an amorphous overlayer. Furthermore, our results suggest that improved catalytic activity of oxides incorporated with La 3+ ions (and likely other metal ions) is due to an increase in the number of terminal octahedral Co(O) x (OH) y edge sites upon Co 3 O 4 lattice deconstruction, rather than enhanced intrinsic catalysis.

Catalysts↗

DOE OSTI2025

Formation of open ruthenium branched structures with highly exposed active sites for oxygen evolution reaction electrocatalysis

The formation of exposed active sites that have high activity and stability for oxygen evolution reaction (OER) catalysis is a significant opportunity for improving water electrolysers. Low-index facets surface Ru can achieve both high activity and stability for OER. Here, we present a new catalyst design where low-index faceted Ru branches are grown off the corners of Pt nanocubes, forming open Ru branched nanoparticles. This open branched structure, exposing low-index facets on its length-tunable branch, enables a high electrochemically active surface area (ECSA), achieving high activity and stability for OER. This design strategy and synthetic control provide a principle for achieving high-performance OER nanocatalysts.

Xiao, Sa [The University of New South Wales, Sydne↗

DOE OSTI2026

Enhancing Oxygen Evolution Reaction and Stability in Proton-Conducting Solid Oxide Electrolysis Cells (p-SOECs) via a Porous Gadolinium-Doped Ceria Interlayer

Proton-conducting solid oxide electrolysis cells (p-SOECs) offer a promising pathway for intermediate temperature (400-600 °C) hydrogen production. However, they still face critical challenges related to sluggish oxygen evolution reaction (OER) kinetics and low Faradaic efficiencies. Here, in this work, we demonstrate that introducing a thin (~0.8 µm) porous Gd 0.1 Ce 0.9 O 1.95 (GDC) interlayer between a BaCo 0.8 Zr 0.1 Zn 0.1 O 3-δ (BCZZ) oxygen electrode and electrolyte significantly enhances p-SOEC performance. The GDC interlayer reduces polarization resistance by 48% (0.54 to 0.28 O cm 2 ) and increases Faradaic efficiency from 63% to 81% at -0.8 A/cm 2 and 600 °C. GDC interlayer p-SOECs display elevated effective H 2 current densities compared to control p-SOECs and reach up to -1.22 A/cm 2 at 1.3 V. Mechanistic studies on the interactions between GDC and BCZZ reveal that GDC intrinsically promotes OER kinetics by significantly reducing the polarization activation energy (Ea p ), dropping from 1.45 to 1.22 eV for full p-SOECs and 0.98 to 0.76 eV for symmetric cells. This promotional effect is localized in the electrochemically active region near the electrolyte interface. Durability testing for over 1500 hours under 50% H 2 O conditions indicates that the GDC interlayer also improves long-term stability, with a degradation rate 53% lower than control p-SOECs. By pinpointing the interfacial region where GDC exerts its promotional effect, highlighting its role in enhancing OER kinetics, and establishing interlayer engineering as a powerful technique, this work provides a unified pathway to simultaneously improve p-SOEC activity, Faradaic efficiency, and durability.

08 - HYDROGEN↗

DOE OSTI2023

Catalytic Activity and Stability of Non-Platinum Group Metal Oxides for the Oxygen Evolution Reaction in Anion Exchange Membrane Electrolyzers

The activities and stabilities of non-platinum group metals (PGMs) in the forms of monometallic (Mn 2 O 3 , Fe 2 O 3 , Co 3 O 4 , NiO) and bimetallic (NiFe 2 O 4 , CoNiO 2 ) oxides were assessed for the oxygen evolution reaction (OER) in alkaline media and compared with IrO 2 . Both half-cell, rotating disc electrode (RDE) apparatus and single-cell, membrane electrode assemblies (MEA) were used to study kinetic and device-level performance in parallel and to provide insights into the use of these materials in anion exchange membrane (AEM) electrolyzers. Normalization of RDE results by geometric and physical surface areas, double layer capacitance, and metal content probed differences in physically vs electrochemically accessible surface areas and ensured reported trends were independent of the normalization method. The results showed that: (i) Ni- and Co- containing materials met or exceeded IrO 2 performance in both RDE and MEA testing, (ii) Co 3 O 4 deactivated over time-on-stream (1.8 V for 13.5 h) due to oxide and, relatedly, particle growth, (iii) NiFe 2 O 4 increased in activity over time-on-stream due to dissolution of Fe and an increased Ni/Fe ratio, and (iv) reduction of catalyst layer resistance is an avenue to further increase device-level performance. These results demonstrated the clear viability for non-PGMs to be used as anode catalysts in AEM devices.

25 ENERGY STORAGE↗

DOE OSTI2023

Understanding the Degradation of La 1−x Sr x FeO 3−δ (0 ≤ x ≤ 1) Perovskite Oxides during the Oxygen Evolution Reaction in Alkaline Solution

Perovskite oxides are an emerging class of highly active catalysts for the oxygen evolution reaction (OER); however, their electrochemical stability remains poorly understood. Here, we report a systematic evaluation of the OER activity and stability of La 1−x Sr x FeO 3-δ perovskites in 1 M KOH. Their initial OER activity first increases with increasing Sr content (fromx= 0 to 0.8), and then decreases when the Sr content is increased to 1. Their stability evaluated by monitoring the element leaching from the electrodes show that La does not leach at a detectable rate, but Sr and Fe leach substantially. The leaching of Sr occurs at similar rates under open circuit potential (OCP) and OER potential, suggesting a nonelectrochemical dissolution process. The leaching of Fe is, however, strongly dependent on the electrode potential. More Fe leaching is observed under the OER potential than OCP. Additionally, the electrode with higher initial OER activity leaches more Fe. These results indicate that OER facilitates the dissolution of Fe from the electrode. The leaching of Fe, in turn, is considered responsible for the activity loss of La 1-x Sr x FeO 3−δ during OER. This study brings new insight into the degradation mechanism of La 1-x Sr x FeO 3−δ and their related perovskite oxides during electro-oxidation processes.

Electrochemistry↗

DOE OSTI2024

Ruthenium-lead oxide for acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Developing an active and stable anode catalyst for the proton exchange membrane water electrolyzer (PEM-WE) is a critical objective to enhance the economic viability of green hydrogen technology. However, the expensive iridium-based electrocatalyst remains the sole practical material with industrial-level stability for the acidic oxygen evolution reaction (OER) at the anode. Ruthenium-based catalysts have been proposed as more cost-effective alternatives with improved activity, though their stability requires enhancement. The current urgent goal is to reduce costs and noble metal loading of the OER catalyst while maintaining robust activity and stability. Here, in this study, we design a Ru-based OER catalyst incorporating Pb as a supporting element. This electrocatalyst exhibits an OER overpotential of 201 mV at 10 mA.cm -2 , simultaneously reducing Ru noble metal loading by similar to 40%. Normalization of the electrochemically active surface area unveils improved intrinsic activity compared to the pristine RuO 2 catalyst. During a practical stability test in a PEM-WE setup, our developed catalyst sustains stable performance over 300 h without notable degradation, underscoring its potential for future applications as a reliable anodic catalyst.

Electrocatalysis↗

DOE OSTI2023

La- and Mn-doped cobalt spinel oxygen evolution catalyst for proton exchange membrane electrolysis

Discovery of earth-abundant electrocatalysts to replace iridium for the oxygen evolution reaction (OER) in a proton exchange membrane water electrolyzer (PEMWE) represents a critical step in reducing the cost for green hydrogen production. Here we report a nanofibrous cobalt spinel catalyst codoped with lanthanum (La) and manganese (Mn) prepared from a zeolitic imidazolate framework embedded in electrospun polymer fiber. The catalyst demonstrated a low overpotential of 353 millivolts at 10 milliamperes per square centimeter and a low degradation for OER over 360 hours in acidic electrolyte. A PEMWE containing this catalyst at the anode demonstrated a current density of 2000 milliamperes per square centimeter at 2.47 volts (Nafion 115 membrane) or 4000 milliamperes per square centimeter at 3.00 volts (Nafion 212 membrane) and low degradation in an accelerated stress test.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Optimizing Hybrid-Phase IrO2 Catalysts with Ti for Enhanced Oxygen Evolution Reaction for Proton Exchange Membrane Water Electrolysis

To realize a sustainable energy transition, water electrolysis-particularly proton exchange membrane water electrolysis (PEMWE)-holds significant promise. However, practical deployment is hindered by the cost and instability of the anode catalyst, IrO2. Recent studies indicate that tuning the Ir-O bond distance, via doping or composite formation, is key to enhancing the oxygen evolution reaction (OER) performance of IrO2-based electrocatalysts. Herein, a hybrid-phase Ti-incorporated IrO2 electrocatalyst is developed, exhibiting outstanding OER activity (298.8 mV at 100 mA cm-2) and stability over 25 h. This improvement originates from asymmetric interatomic interactions introduced by Ti, as revealed by combined experimental X-ray analyses and theoretical modeling. Ti incorporation induces tensile strain along the z-axis in IrO2 motifs, effectively reducing the average Ir-O bond distance and thereby enhancing OER activity. In situ X-ray absorption spectroscopy further confirms that at 1.5 V (vs. RHE), the elongated Ir-O bond facilitates -OOH* intermediate formation while suppressing Ir dissolution, contributing to superior stability. These findings underscore the critical role of Ir-O bond engineering in balancing activity and durability, offering strategic insights for the rational design of high-performance OER catalysts for renewable energy technologies.

08 HYDROGEN↗

DOE OSTI2023

Elucidation of the Active Site for the Oxygen Evolution Reaction on a Single Pt Atom Supported on Indium Tin Oxide

Single-atom catalysts (SACs) have attracted attention for their high catalytic activity and selectivity, but the nature of their active sites under realistic reaction conditions, involving various ligands, is not well understood. In this study, we use Density Functional Theory calculations and grand canonical basin hopping to theoretically investigate the active site for the oxygen evolution reaction (OER) on single Pt atom supported on Indium Tin Oxide, including the influence of the electrochemical potential. We show that the ligands on the Pt atom change from Pt-OH in the absence of electrochemical potential to PtO(OH) 4 in electrochemical conditions. This change of the chemical state of Pt is associated to a decrease of 0.3V for the OER overpotential. This highlights the importance of accurately identifying the nature of the active site under reaction conditions and the impact of adsorbates on the electrocatalytic activity. This theoretical investigation enhances our understanding of SACs for OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

The ionomer as an oxygen evolution reaction promoter: piperidinium’s impact on mechanistic pathways on NiO, IrO 2 , and Fe–NiO

The commercial viability of anion exchange membrane (AEM) electrolysis requires optimization of various stack components, with specific catalyst-ionomer combinations often yielding higher current densities, lowered Tafel slopes, and improved mass activity. In this joint theoretical-experimental study, theoretical calculations detail the impact of Versogen’s piperidinium functional group on the complex, kinetically limiting oxygen evolution reaction, finding that the functional group can act as a promoter of specific steps (O*/O 2 * formation; H 2 O/O 2 desorption with reaction enthalpies ranging between 0.2–0.6 eV at higher coverages of O x H y intermediates) on NiO and NiFeO x catalysts. In particular, Fe sites on the NiFeO x catalyst facilitate concerted mechanisms of O*/O 2 * formation and H 2 O desorption with a low enthalpy of 0.5 eV; O 2 desorption alone requires only 0.3 eV. In contrast, Versogen-IrO 2 results in stronger Ir–O bonds, where the enthalpies for bond breaking (Ir–OH 2 and Ir–O 2 ) are considerably higher (1.4 eV and 1.6 eV, respectively). Rotating disk electrode studies utilized commercially available NiO and IrO 2 and synthesized 7.5 wt % Fe in NiFeO x catalysts in combination with Versogen, a common AEM ionomer, and Nafion, an alternative binder. Electrochemical testing validated the impact of these mechanistic changes on ionomer-catalyst combinations, finding that Versogen particularly activates NiO and NiFeO x compared to IrO 2 . Following a 13.5 h hold at 1.8 V, mass activities and Tafel slopes improved to 34 ± 13 A g −1 and 79 ± 2 mV dec −1 (NiO) and 82 ± 4.9 A g −1 and 72 ± 2 mV dec −1 (NiFeO x ). In contrast, Versogen-IrO 2 only reached 17 ± 2.9 A g −1 and 81 ± 3 mV dec −1 . Optimization of the ionomer-catalyst can yield significant increases in performance from initial activity and after an electrochemical conditioning procedure: this enhancement to the mass activity resulted in a 200.9 ± 106.1% improvement for Versogen-NiFeO x and 1284.2 ± 260.5% for Versogen-NiO. In contrast, Nafion-NiFeO x and -NiO offered moderate improvements of 39.1 ± 30.5% and 120.9 ± 59.1%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Interplay between element-specific distortions and electrocatalytic oxygen evolution for cobalt–iron hydroxides

A microscopic understanding of how Fe-doping of Co(OH) 2 improves electrocatalytic oxygen evolution remains elusive. We study two Co 1–x Fex(OH) 2 series that differ in fabrication protocol and find composition alone poorly correlates to catalyst performance. Structural descriptors extracted using X-ray diffraction, X-ray absorption spectroscopy, and Raman spectroscopy reveal element-specific distortions in Co 1–x Fe x (OH) 2 . These structural descriptors are composition-dependent within individual sample series but inconsistent across fabrication protocols, revealing fabrication-dependence in catalyst microstructure. Correlations between structural parameters from different techniques show that Fe–O resists bond length changes, forcing distortion of Co environments. We find the difference in O–M–O bond angles between Co and Fe sites to correlate with electrocatalytic behavior across both sample series, which we attribute to asymmetric distortion of potential energy surfaces for the Co(III) to Co(IV) oxidation. A Tafel slope consistent with a rate-limiting step without electron transfer emerges as the O–Co–O angle decreases, implying a distortion-induced transition in the rate-limiting step. The fabrication dependence of electronic and bonding structure in the catalysts should be considered in theoretical and high-throughput analyses of electrocatalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

The Role of Cu 3+ in the Oxygen Evolution Activity of Copper Oxides

Cu-based oxides and hydroxides represent an important class of materials from a catalytic and corrosion perspective. In this study, we investigate the formation of bulk and surface Cu 3+ species that are stable under water oxidation catalysis in alkaline media. So far, no direct evidence existed for the presence of hydroxides (CuOOH) or oxides, which were primarily proposed by theory. Here, this work directly places CuOOH in the oxygen evolution reaction (OER) Pourbaix stability region with a calculated free energy of −208.68 kJ/mol, necessitating a revision of known Cu–H 2 O phase diagrams. We also predict that the active sites of CuOOH for the OER are consistent with a bridge O* site between the two Cu 3+ atoms with onset at ≥1.6 V vs the reversible hydrogen electrode (RHE), aligning with experimentally observed Cu 2+/3+ oxidation waves in cyclic voltammetry of Fe-free and Fe-spiked copper in alkaline media. Trace amounts of Fe (2 μg/mL (ppm) to 5 μg/mL) in the solution measurably enhance the catalytic activity of the OER, likely due to the adsorption of Fe species that serve as the active sites . Importantly, modulation excitation X-ray absorption spectroscopy (ME-XAS) of a Cu thin-film electrode shows a distinct Cu 3+ fingerprint under OER conditions at 1.8 V vs RHE. Additionally, in situ Raman spectroscopy of polycrystalline Cu in 0.1 mol/L (M) KOH revealed features consistent with those calculated for CuOOH in addition to CuO. Overall, this work provides direct evidence of bulk electrochemical Cu 3+ species under OER conditions and expands our longstanding understanding of the oxidation mechanism and catalytic activity of copper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Oxygen Evolution on Mechanically Strained TiO2/NiTi: Implications of Compositional Heterogeneity at (Photo)Electrocatalytic Interfaces

The adsorption and activation energetics underpinning small molecule conversion on heterogeneous (photo)electrocatalysts are intrinsically tied to catalyst surface properties. Absent compositional characterization techniques with sufficient interface sensitivity, however, (photo)electrochemical performance can be misinterpreted in the context of bulk or near-surface material properties. Here we provide a fundamental investigation of the convoluting role of near-surface compositional heterogeneity in the interpretation of (photo)electrochemical alkaline oxygen evolution reaction (OER) activity, highlighting challenges in correlating composition measured by surface- and near-surface-sensitive probes. TiO2 thin films grown by air-annealing the superelastic alloy Nitinol (TiO2/NiTi) crack under tensile mechanical strain, increasing the number of electrochemically active Ni sites (Ni site density) that are probed via voltammetric features corresponding to Ni3+/Ni2+ redox events. (Photo)electrochemical OER kinetics trend with Ni site density, with overpotentials and Tafel slopes decreasing for Ni site densities < 1013 Ni/cm2geo and asymptotically approaching the performance of the base NiTi substrate for Ni site densities > 1013 Ni/cm2geo. Photoelectrochemical fill factors follow similar Ni site density dependent trends. When probing unstrained TiO2/NiTi, Ni site densities are two orders of magnitude higher when comparing near-surface-sensitive techniques (e.g., X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectrometry (TOF-SIMS), and scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDS)) to surface-sensitive electrochemical measurements. This result highlights the challenge of correlating kinetic performance with intrinsic surface properties of electrochemical interfaces in the presence of near-surface compositional heterogeneity. Further, it reinforces the importance of fundamental investigations of surfaces with well-controlled composition and structure and the need for physically grounded and self-consistent interpretation of multiple near-surface characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Cutting-edge methods for amplifying the oxygen evolution reaction during seawater electrolysis: a brief synopsis

Electrochemical water splitting has been considered a clean and continual way for hydrogen (H 2 ) production. Direct seawater electrolysis is a potentially attractive technology due to the ample access to seawater and scarce freshwater resources in some regions. However, the presence of impurities (e.g., Cl - , Mg 2+ ) and the resulting corrosion and side reactions, such as the chloride oxidation reaction (ClOR), makes seawater electrocatalysis more challenging than that of fresh or alkaline water due to competition with the oxygen evolution reaction (OER) at the anode. Consequently, much effort has been devoted to developing approaches to enhance OER performance and suppress the ClOR. In this minireview, we summarize three general strategies for enhancing OER activity and selectivity in seawater electrolysis based on three different concepts: (1) the sole development of robust and high-performance OER catalysts in pure seawater electrolytes, (2) the introduction of additives to seawater electrolytes (e.g., alkalis and/or salts without chloride) to enhance the potential equilibrium gap between the ClOR and OER in combination with regular highly active OER catalysts, and (3) a combination of approaches (1) and (2). Finally, the current challenges and potential opportunities for green H 2 production from seawater electrolysis are briefly presented.

08 HYDROGEN↗

DOE OSTI2022

La–Sr–Co oxide catalysts for oxygen evolution reaction in anion exchange membrane water electrolyzer: The role of electrode fabrication on performance and durability

Anion exchange membrane water electrolysis is an attractive technology for low-cost generation of “green” hydrogen by combining the use of noble metal-free catalysts with pure water feed. By thus addressing main drawbacks of the liquid alkaline electrolysis and proton exchange membrane water electrolysis, anion exchange membrane water electrolysis stands an excellent chance of replacing the two technologies. The development of active and stable platinum group metal (PGM)-free catalysts for oxygen evolution reaction (OER) is crucial for making anion exchange membrane water electrolyzers (AEMWEs) practical. For this work, we synthesized, characterized and tested two La–Sr–Co oxide-based OER catalysts. First, we characterized the catalysts by XRD, SEM, and N 2 physisorption and assessed their OER activity in a three-electrode cell. Next, we focused on electrode fabrication, demonstrating the importance of catalyst-ink application to the porous transport layers (PTLs) and a key role of adding a binder to the catalyst ink to prevent the catalyst detachment from the PTL in pure water. We tested three membrane electrode assemblies prepared using different formulations of the anode catalyst ink. The results show that the optimum ink formulation is essential for the performance on pure-water feed by maximizing OH - conductivity of the catalyst layer and catalyst-membrane interface.

47 OTHER INSTRUMENTATION↗