Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented attachment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Grain‐Boundary‐Rich Noble Metal Nanoparticle Assemblies: Synthesis, Characterization, and Reactivity

Abstract Here, a comprehensive study on the synthesis, characterization, and reactivity of grain‐boundary (GB)‐rich noble metal nanoparticle (NP) assemblies is presented. A facile and scalable synthesis of Pt, Pd, Au, Ag, and Rh NP assemblies is developed, in which NPs are predominantly connected via Σ3 (111) twin GBs, forming a network. Driven by water electrolysis, the random collisions and oriented attachment of colloidal NPs in solution lead to the formation of Σ3 (111) twin boundaries and some highly mismatched GBs. This synthetic method also provides convenient control over the GB density without altering the crystallite size or GB type by varying the NP collision frequency. The structural characterization reveals the presence of localized tensile strain at the GB sites. The ultrahigh activity of GB‐rich Pt NP assembly toward catalytic hydrogen oxidation in air is demonstrated, enabling room‐temperature catalytic hydrogen sensing for the first time. Finally, density functional theory calculations reveal that the strained Σ3(111) twin boundary facilitates oxygen dissociation, drastically enhancing the hydrogen oxidation rate via the dissociative pathway. This reported large‐scale synthesis of the Σ3 (111) twin GB‐rich structures enables the development of a broad range of high‐performance GB‐rich catalysts.

Geng, Xin↗

Revisiting Primary Particles in Layered Lithium Transition‐Metal Oxides and Their Impact on Structural Degradation

Abstract Layered lithium transition‐metal oxide materials, e.g., Li(Ni 1− x − y Co x Mn y )O 2 (NCM) and Li(Ni 1− x − y Co x Al y )O 2 , are the most promising candidates for lithium‐ion battery cathodes. They generally consist of ≈10 µm spherical particles densely packed with smaller particles (0.1–1 µm), called secondary and primary particles, respectively. The micrometer‐ to nanometer‐sized particles are critical to the battery performance because they affect the reaction capability of the cathode. Herein, the crystal structure of the primary particles of NCM materials is revisited. Elaborate transmission electron microscopy investigations reveal that the so‐called primary particles, often considered as single crystals, are in fact polycrystalline secondary particles. They contain low‐angle and exceptionally stable special grain boundaries (GBs) presumably created during aggregation via an oriented attachment mechanism. Therefore, this so‐called primary particle is renamed as primary‐like particle. More importantly, the low‐angle GBs between the smaller true primary particles cause the development of nanocracks within the primary‐like particles of Ni‐rich NCM cathodes after repetitive electrochemical cycles. In addition to rectifying a prevalent misconception about primary particles, this study provides a previously unknown but important origin of structural degradation in Ni‐rich layered cathodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-Assembly of Cerium Oxide Nanostructures in Ice Molds

The formation of nanorods, driven by the physico-chemical phenomena during the freezing of ceria nanoparticle suspension is reported. During freezing a dilute solution of CeO2 nanocrystals, some nuclei remain in solution while others are trapped inside the voids formed within the growing ice front. Over time the particles trapped within the constrained geometries combined by an oriented attachment process to form ceria nanorods. The experimental observations are further supported through Molecular Dynamics (MD) simulations. These observations suggest a new possible strategy for the templated formation of nanostructures through self assembly by exploiting natural phenomena such as freezing of water. "(A portion of) The research described in this paper (poster or presentation) was performed in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory."

36 MATERIALS SCIENCE↗

Chemical structure and complex growth modes of magnesium silicate hydrate: Nanoparticle orientation, aggregation, and fusion

The extent of utilization of magnesium silicate hydrate (MSH) in construction is limited partly because of insufficient data ascertaining the kinetics of its precipitation. In this report MSH grown homogeneously or heterogeneously in the range of magnesium to silicon solution molar concentration ratios, [Mg]/[Si] = 0.5-1.5, and temperature = 25-80 °C was analyzed for its chemical structure and morphology. Infrared spectroscopy and geochemical modeling show that increasing the [Mg]/[Si] ratio results in less silicate polymerization in MSH. Atomic force microscopy reveals the presence of nanoparticles that aggregate and fuse to form films. Oriented attachment of nanoparticles and features indicative of enhanced crystallinity were observed at higher temperatures and longer reaction times. These data provide direct evidence for the persistence of hierarchical structures (i.e., nanoparticles forming 3D microparticles and 2D film layers) at the nanoscale to mesoscale. These findings offer insights into the precise chemical synthesis of MSH and its widespread use as a binder for construction purposes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloidal phenomena reflect the interplay between interfacial solution structure, interparticle forces, and dynamical response

The physical and chemical properties of colloidal systems are central to both natural and synthetic processes that enable a wide range of energy and environmental applications. These properties are an emergent outcome of the structure that colloidal systems adopt in response to the interplay of electrical, van der Waals, hydration, and steric forces coupled to the inherent fluctuations of the system. Here, in this study, we review the nature of those forces and show how variations in their relative importance lead to distinct free energy landscapes and consequent dynamic behaviors, illustrated for colloidal dispersions, nanocrystal superlattices, and mesocrystlline solids formed through oriented attachment. We end by discussing the challenges to future progress arising from the need to seamless couple from molecular to particle to ensemble scales.

42 ENGINEERING↗

Crystallization pathways and interfacial drivers for the formation of hierarchical architectures

The development of structural hierarchy on various length scales during crystallization process is ubiquitous in biological systems and is also observed in synthetic nanomaterials. The driving forces for the formations of complex architectures range from local interfacial interactions, that modify interfacial speciation, local supersaturation, and nucleation barriers, to macroscopic interparticle forces. Although it is enticing to interpret the formation of hierarchical architectures as the assembly of independently nucleated building blocks, often crystallization pathways follow monomer-by-monomer addition with structural complexity arising from interfacial chemical coupling and strongly correlated fluctuation dynamics in the electric double layers. Here, the mechanism of the development of structural hierarchy through heterogeneous nucleation, coupled interfacial nucleation and assembly, and oriented attachment of independently nucleated particles is discussed. In this article, the emphasis is made on the discussion of the underlying interfacial forces and chemical coupling that drives crystallization pathways towards the formation of structural hierarchy.

36 MATERIALS SCIENCE↗

VO{sub 2} (A): Reinvestigation of crystal structure, phase transition and crystal growth mechanisms

Well crystallized VO{sub 2} (A) microrods were grown via a single step hydrothermal reaction in the presence of V{sub 2}O{sub 5} and oxalic acid. With the advantage of high crystalline samples, we propose P4/ncc as an appropriate space group at room temperature. From morphological studies, we found that the oriented attachment and layer by layer growth mechanisms are responsible for the formation of VO{sub 2} (A) micro rods. The structural and electronic transitions in VO{sub 2} (A) are strongly first order in nature, and a marked difference between the structural transition temperatures and electronic transitions temperature was evidenced. The reversible intra- (LTP-A to HTP-A) and irreversible inter- (HTP-A to VO{sub 2} (M1)) structural phase transformations were studied by in-situ powder X-ray diffraction. Attempts to increase the size of the VO{sub 2} (A) microrods are presented and the possible formation steps for the flower-like morphologies of VO{sub 2} (M1) are described. - Graphical abstract: Using a single step and template free hydrothermal synthesis, well crystallized VO{sub 2} (A) microrods were prepared and the P4/ncc space group was assigned to the room temperature crystal structure. Reversible and irreversible phase transitions among different VO{sub 2} polymorphs were identified and their progressive nature was highlighted. Attempts to increase the microrods size, involving layer by layer formation mechanisms, are presented. - Highlights: • Highly crystallized VO{sub 2} (A) microrods were grown via a single step hydrothermal process. • The P4/ncc space group was determined for VO{sub 2} (A) at room temperature. • The electronic structure and progressive nature of the structural phase transition were investigated. • A weak coupling between structural and electronic phase transitions was identified. • Different crystallite morphologies were discussed in relation with growth mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boron doped diamond synthesized from detonation nanodiamond in a C-O-H fluid at high pressure and high temperature

Boron doped diamond (BDD) was synthesized under high pressure and high temperature (HPHT) of 7 GPa, 1230 °C in a short time of 10 s from a powder mixtures of detonation nanodiamond (DND), pentaerythritol C{sub 5}H{sub 8}(OH){sub 4} and amorphous boron. SEM, TEM, XRD, XPS, FTIR and Raman spectroscopy indicated that BDD nano- and micro-crystals have formed by consolidation of DND particles (4 nm in size). XRD showed the enlargement of crystallites size to 6–80 nm and the increase in diamond lattice parameter by 0.02–0.07% without appearance of any microstrains. Raman spectroscopy was used to estimate the content of boron atoms embedded in the diamond lattice. It was found that the Raman diamond peak shifts significantly from 1332 cm{sup −1} to 1290 cm{sup −1} without appearance of any non-diamond carbon. The correlation between Raman peak position, its width, and boron content in diamond is proposed. Hydrogenated diamond carbon in significant amount was detected by IR spectroscopy and XPS. Due to the doping with boron content of about 0.1 at%, the electrical conductivity of the diamond achieved approximately 0.2 Ω{sup −1} cm{sup −1}. Reaction mechanism of diamond growth (models of recrystallization and oriented attachment) is discussed, including the initial stages of pentaerythritol pyrolysis and thermal desorption of functional groups from the surface of DND particles with the generation of supercritical fluid of low-molecular substances (H{sub 2}O, CH{sub 4}, CO, CO{sub 2}, etc.), as well as byproducts formation (B{sub 2}O{sub 3}, B{sub 4}C). - Highlights: • Boron doped diamond BDD synthesized from detonation nanodiamond, C{sub 5}H{sub 8}(OH){sub 4} and boron. • BDD nano/microcrystals are studied by XRD, SEM, TEM, XPS, FTIR, Raman spectroscopy. • Diamond growth and transition to electro-conductive state (0.2 Ω{sup −1} cm{sup −1}) is observed. • Correlations of Raman bands position and width versus boron content are considered. • High-pressure/temperature reaction mechanism (stages, routes, products) is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural characterization of single-crystalline potassium hollandite nanowires

Single-crystalline potassium hollandite KTi{sub 8}O{sub 16.5} nanowires were synthesized by the molten salt method at 800 deg. C. Scanning electron microscopy observation shows that the nanowires are with octagonal cross-sections, and combined analyses of transmission electron microscopy and the electron diffraction results show that the terminated planes are angled 90 or 60 degrees to the growth direction, [001] crystallography direction. Ordering of the potassium cations in the tunnels was revealed by electron diffraction. The mechanism of one-dimensional growth of the nanowires was attributed to the oriented attachment mechanism.

36 MATERIALS SCIENCE↗

Environmentally friendly growth of single-crystalline K{sub 2}Ti{sub 6}O{sub 13} nanoribbons from KCl flux

Single-crystalline K{sub 2}Ti{sub 6}O{sub 13} nanoribbons with typical width ranging from one hundred nanometers to a few hundred nanometers and length up to tens of microns were prepared from KCl flux. The nanoribbons were characterized by a range of methods including X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, selected area electron diffraction and high-resolution transmission electron microscopy. Ultraviolet-visible experiments showed that the K{sub 2}Ti{sub 6}O{sub 13} nanoribbons were wide-band semiconductors with a band width E{sub g} = 3.4 eV. The mechanism of one-dimensional growth of the nanoribbons was attributed to the oriented attachment mechanism.

36 MATERIALS SCIENCE↗

Facile synthesis and characterization of erythrocyte-like Y-doped PbWO{sub 4} mesocrystals and their photocatalytic activity

Novel erythrocyte-like Y-doped PbWO{sub 4} mesocrystals with average diameter and thickness of 1.5 and 0.7 μm are fabricated via a facile co-precipitation route at room temperature in the ethylene glycol (EG)-water mixed solvent. Time-dependent samples centrifuged at different times are carefully characterized by powder X-ray diffraction (pXRD), field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM) and Raman spectrum. The possible formation mechanism for the novel erythrocyte-like mesocrystals is proposed on the basis of these observations. The photocatalytic activity of the Y-doped PbWO{sub 4} mesocrystals is further investigated in terms of the degradation of the acid orange II under UV irradiation. This simple and environment-friendly strategy presented here offers promising route for the synthesis of other inorganic materials with unique morphologies and interesting properties. - Graphical abstract: Display Omitted - Highlights: • Novel erythrocyte-like Y-doped PbWO{sub 4} mesocrystals are firstly synthesized via a facile co-precipitation route. • The mesocrystals are assembled by small nanoparticles a common crystallographic fashion. • The erythrocyte-like mesocrystals exhibit well photocatalytic activity. • A recrystallization-growth-oriented attachment formation mechanism is proposed.

36 MATERIALS SCIENCE↗

Facile synthesis, optical and photoconductive properties of novel ZnO nanocones

Large-scale, uniform ZnO nanocones with tips about 200 nm and length about 50 {mu}m have been synthesized by a facile hydrothermal method. The morphology and structures were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and high-resolution transmission electron microscope (HR-TEM). The effects of reaction time and PEG-400 on the morphology of ZnO nanostructures were investigated, also an oriented attachment mechanism has been briefly proposed. The optical properties were investigated by lasing confocal microscope and photoluminescence spectrum, a strong near band edge emission peak centered at 387 nm from the ZnO nanocones was observed in photoluminescence spectrum. Finally, we have fabricated UV photodetector based on single ZnO nanocone, which present good switching properties by turning the UV light on and off.

36 MATERIALS SCIENCE↗

Nonaqueous sol-gel synthesis and growth mechanism of single crystalline TiO{sub 2} nanorods with high photocatalytic activity

In this paper, we report on a nonaqueous synthesis of single crystalline anatase TiO{sub 2} nanorods by reaction between TiCl{sub 4} and benzyl alcohol at a low temperature of 80 deg. C. The resulting samples were characterized with X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, nitrogen adsorption, X-ray photoelectron spectrometry and UV-vis diffuse reflectance spectroscopy. We proposed that the TiO{sub 2} nanorods were formed through an oriented attachment mechanism. More importantly, these single crystalline anatase TiO{sub 2} nanorods exhibited significantly higher photocatalytic activities than commercial photocatalyst P25. This study provides an environmentally friendly and economic approach to produce highly active TiO{sub 2} photocatalyst.

36 MATERIALS SCIENCE↗

Sonochemical synthesis of luminescent CeCO{sub 3}OH one-dimensional quadrangular prisms

Orthorhombic single-crystalline cerium carbonate hydroxide (CeCO{sub 3}OH) with one-dimensional (1D) microstructures has been successfully synthesized by a facile sonochemical reaction between cerous nitrate and urea. These 1D microstructures were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM). The as-synthesized CeCO{sub 3}OH has uniform lengths and good dispersion. Synthetic parameters, such as the concentration of reagents, were found to have close relationship with the morphologies and sizes of the final products. The ultrasound-induced oriented attachment growth mechanism has been proposed for the possible formation mechanism of sample. Room-temperature photoluminescence of CeCO{sub 3}OH samples with different morphologies has also been investigated.

36 MATERIALS SCIENCE↗

Hydrothermal transformation of titanate nanotubes into single-crystalline TiO{sub 2} nanomaterials with controlled phase composition and morphology

Single-crystalline TiO{sub 2} nanomaterials were synthesized by hydrothermally treating suspensions of H-titanate nanotubes and characterized by XRD, TEM, and HRTEM. The effects of the pH values of the suspensions and the hydrothermal temperatures on the phase composition and morphology of the obtained TiO{sub 2} nanomaterials were systematically investigated. The H-titanate nanotubes were predominately transformed into anatase nanoparticle with rhombic shape when the pH value was greater than or equal to 1.0, whereas primarily turned into rutile nanorod with two pyramidal ends at the pH value less than or equal to 0.5. We propose a possible mechanism for hydrothermal transformation of H-titanate nanotubes into single-crystalline TiO{sub 2} nanomaterials. While the H-titanate nanotubes transform into tiny anatase nanocrystallites of ca. 3 nm in size, the formed nanocrystallites as an intermediate grow into the TiO{sub 2} nanomaterials with controlled phase composition and morphology. This growth process involves the steps of protonation, oriented attachment, and Ostwald ripening.

36 MATERIALS SCIENCE↗

Preparation of dendritic-like Ag crystals using monocrystalline silicon as template

Research highlights: {yields} Template-assisted method for synthesis of dendritic silver. {yields} Unique dendritic silver structure with stems, branches, and leaves. {yields} The morphology of silver depends on silicon surface roughness. {yields} Both diffusion and oriented attachment dominating the dendritic structure formation. -- Abstract: Symmetric dendritic silver structures with controlled morphology were successfully synthesized by a solvothermal method with the assistance of monocrystalline silicon. The morphology and structure of the dendritic silver were characterized by transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and scanning electron microscopy (SEM). It was found that the architecture of silver crystals could be controlled via simply adjusting the experiment parameters: AgNO{sub 3} concentration, reaction time and temperature. Moreover, structural characterizations suggested that the dendritic silver structures preferentially grew along (1 1 1) and (2 0 0) directions, leading to the formation of dendritic structures with 1-2 {mu}m in stem diameter and 10-50 {mu}m in length. Additionally, the formation process of the dendritic silver structures was studied, and a possible formation mechanism was proposed based on the experimental results.

36 MATERIALS SCIENCE↗

Simple synthesis of PbSe nanocrystals and their self-assembly into 2D ‘flakes’ and 1D ‘ribbons’ structures

Highlights: • PbSe is obtained in a simple way by the co-precipitation method at low-temperature. • The structural, morphological and optical properties of PbSe were studied. • Adding NH{sub 4}OH to the precursor solutions influences on the morphology. • 2D- and 1D-PbSe structures assemble by oriented attachment. • PbSe can be a potential candidate for thermoelectric applications. - Abstract: This work presents a simple and low-temperature method to prepare a variety of Lead selenide (PbSe) nanostructures, using aqueous solutions of Pb(NO{sub 3}){sub 2} and NaHSe. Nanostructures with different morphology were obtained by varying the Pb:Se molar ratio, as well as the mixing sequence of NH{sub 4}OH with either Pb(NO{sub 3}){sub 2} or NaHSe. Nanoparticles with different shapes (spherical and octahedral), and self-assembled structures (flakes and ribbons) were observed by Transmission Electron Microscopy. X-ray results confirmed that the PbSe rock-salt crystalline structure was obtained for all of the prepared samples. The crystal size is in the order of 7.3 to 8.9 nm for single nanocrystals. The absorption spectra of the samples show exciton absorption bands at 1395 nm and 1660 nm. This material could be used to develop more advanced structures for thermoelectric generators.

36 MATERIALS SCIENCE↗

Analysis of growth kinetics and impact of NH{sub 3} on the morphology evolution of hexagonal-prism shaped Y{sub 4}O(OH){sub 9}NO{sub 3}/Y{sub 2}O{sub 3} single crystals

Highlights: • Tailored the morphology of Y{sub 4}O(OH){sub 9}NO{sub 3}and Y{sub 2}O{sub 3} crystals using different electrolytes by hydrothermal method. • Role of NH{sub 3} in the formation of hexagonal prism like morphology. • Time dependent experiments to study the growth process and formation of hexagonal prisms. - Abstract: The effect of NH{sub 3} on the morphology evolution of single crystalline hexagonal-prism like Y{sub 4}O(OH){sub 9}NO{sub 3} and Y{sub 2}O{sub 3} has been systematically investigated, as a function of reaction time, by using a combination of powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). Rational control over the morphology has been achieved by the choice of suitable electrolytes like NaNO{sub 3}, KNO{sub 3}, NH{sub 4}NO{sub 3}, KCl and NH{sub 4}Cl in the presence of NH{sub 4}OH. We report that the cross-sectional geometry of hydrothermally grown one-dimensional Y{sub 4}O(OH){sub 9}NO{sub 3} crystals can be tuned from spherical to hexagonal-prism like shape by introducing a particular reagent like NH{sub 4}NO{sub 3} in the presence of NH{sub 4}OH. An ‘oriented attachment’ mediated growth process takes place along with the ‘dissolution-recrystallization’ route which eventually resulted in the generation of the single crystals with hexagonal-prism like morphology.

36 MATERIALS SCIENCE↗