Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orbit maneuvers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Trajectories and orbital maneuvers for the ISEE-3/ICE comet mission

The ISEE-3/ICE spacecraft, (launched in 1978), and expected to obtain the first measurements of comet Giacobinni-Zinner in September 1985, has undertaken a combination of propulsive maneuvers, lunar swing-bys, and solar perturbations to produce its present trajectory profile. ISEE-3 is a drum-shaped, spin-stabilized spacecraft equipped with a redundant pair of high-resolution sun sensors, a medium-gain S-band antenna, a hydrazine propulsion system and a science experiment payload. After being placed into a sun-earth libration halo orbit in late 1978, ISEE-3 was retargeted to the geomagnetotail in mid-1982 and became the first spacecraft to explore the geomagnetic tail between 80 and 237 earth radii in 1983. These types of maneuvers may prove important for future scientific missions planned as follow-ons to ISEE-3/ICE, such as a joint NASA/ISAS project spacecraft scheduled for Shuttle launch in 1991, and a possible encounter with two comets in 1996 anad 1998.

Farquhar, R.↗
NASA NTRS1993

Visual display aid for orbital maneuvering - Experimental evaluation

An interactive proximity operations planning system, which allows on-site planning of fuel-efficient, multiburn maneuvers in a potential multispacecraft environment, has been experimentally evaluated. An experiment has been carried out in which nonastronaut operators with brief initial training were required to plan a trajectory to retrieve an object accidentally separated from a dual-keel Space Station, for a variety of different orbital situations. The experiments have shown that these operators were able to plan workable trajectories, satisfying a number of operational constraints. Fuel use and planning time were strongly correlated, both with the angle at which the object was separated and with the existence of spatial constraints. Planning behavior was found to be strongly operator-dependent. This finding calls for the need for standardizing planning strategies through operator training or the use of semiautomated planning schemes.

Grunwald, Arthur J.↗
NASA NTRS1975

Orbital maneuvering engine feed system coupled stability investigation

A digital computer model used to analyze and predict engine feed system coupled instabilities over a frequency range of 10 to 1000 Hz was developed and verified. The analytical approach to modeling the feed system hydrodynamics, combustion dynamics, chamber dynamics, and overall engineering model structure is described and the governing equations in each of the technical areas are presented. This is followed by a description of the generalized computer model, including formulation of the discrete subprograms and their integration into an overall engineering model structure. The operation and capabilities of the engineering model were verified by comparing the model's theoretical predictions with experimental data from an OMS-type engine with a known feed system/engine chugging history.

Kahn, D. R.↗
NASA NTRS1975

Space shuttle orbit maneuvering engine reusable thrust chamber program

Analyses and preliminary designs of candidate OME propellant combinations and corresponding engine designs were conducted and evaluated in terms of performance, operating limits, program cost, risk, inherent life and maintainability. For the Rocketdyne recommended and NASA approved propellant combination and cooling concept (NTO/MMH regeneratively cooled engine), a demonstration thrust chamber was designed, fabricated, and experimentally evaluated to define operating characteristics and limits. Alternate fuel (50-50) operating characteristics were also investigated with the demonstration chamber. Adverse operating effects on regenerative cooled operation were evaluated using subscale electrically heated tubes and channels. An investigation of like doublet element characteristics using subscale tests was performed. Full scale 8- and 10-inch diameter like-doublet injectors for the OME were designed, fabricated, and tested. Injector stability was evaluated analytically and experimentally.

Pauckert, R. P.↗
NASA NTRS1975

Space shuttle orbit maneuvering engine

Data on the performance, stability, and thermal characteristics of an OME operating with an alternate injector configuration and with alternate propellants was obtained. The design, manufacturing, and operating characteristics of an electroformed, regeneratively cooled thrust chamber were also derived. Subscale and full scale tests provide data relating to off-design and transient operation.

Pauckert, R. P.↗
NASA NTRS1975

Orbital Maneuvering Engine Feed System Coupled Stability Investigation, Computer User's Manual

An operating manual for the feed system coupled stability model was given, in partial fulfillment of a program designed to develop, verify, and document a digital computer model that can be used to analyze and predict engine/feed system coupled instabilities in pressure-fed storable propellant propulsion systems over a frequency range of 10 to 1,000 Hz. The first section describes the analytical approach to modelling the feed system hydrodynamics, combustion dynamics, chamber dynamics, and overall engineering model structure, and presents the governing equations in each of the technical areas. This is followed by the program user's guide, which is a complete description of the structure and operation of the computerized model. Last, appendices provide an alphabetized FORTRAN symbol table, detailed program logic diagrams, computer code listings, and sample case input and output data listings.

Schuman, M. D.↗
NASA NTRS1975

Space shuttle orbit maneuvering engine reusable thrust chamber program

The feasibility of potential reusable thrust chamber concepts is studied. Propellant condidates were examined and analytically combined with potential cooling schemes. A data base of engine data which would assist in a configuration selection was produced. The data base verification was performed by the demonstration of a thrust chamber of a selected coolant scheme design. A full scale insulated columbium thrust chamber was used for propellant coolant configurations. Combustion stability of the injectors and a reduced size thrust chamber were experimentally verified as proof of concept demonstrations of the design and study results.

Senneff, J. M.↗
NASA NTRS1986

A study of 35-ghz radar-assisted orbital maneuvering vehicle/space telescope docking

An experiment was conducted to study the effects of measuring range and range rate information from a complex radar target (a one-third scale model of the Edwin P. Hubble Space Telescope). The radar ranging system was a 35-GHz frequency-modulated continuous wave unit developed in the Communication Systems Branch of the Information and Electronic Systems Laboratory at Marshall Space Flight Cneter. Measurements were made over radar-to-target distances of 5 meters to 15 meters to simulate the close distance realized in the final stages of space vehicle docking. The Space Telescope model target was driven by an antenna positioner through a range of azimuth and elevation (pitch) angles to present a variety of visual aspects of the aft end to the radar. Measurements were obtained with and without a cube corner reflector mounted in the center of the aft end of the model. The results indicate that range and range rate measurements are performed significantly more accurately with the cooperative radar reflector affixed. The results further reveal that range rate (velocity) can be measured accurately enough to support the required soft docking with the Space Telescope.

Mcdonald, M. W.↗
NASA NTRS1986

Orbital maneuvering vehicle thermal design and analysis techniques

This paper describes the OMV thermal design that is required to maintain components within temperature limits for all mission phases. A key element in the OMV thermal design is the application of a motorized thermal shade assembly that is a replacement for the more conventional variable conductance heat pipes or louvers. The thermal shade assembly covers equipment module radiator areas, and based upon the radiator temperature input to onboard computer, opens and closes the shade, varying the effective radiator area. Thermal design verification thermal analyses results are presented. Selected thermal analyses methods, including several unique subroutines, are discussed. A representation of enclosure Script F equations, in matrix form, is also included. Personal computer application to the development of the OMV thermal design is summarized.

Chapter, J.↗
NASA NTRS1986

Orbital maneuvering end effectors

This invention relates to an end effector device for grasping and maneuvering objects such as berthing handles of a space telescope. The device includes a V-shaped capture window defined as inclined surfaces in parallel face plates which converge toward a retainer recess in which the handle is retained. A pivotal finger (30) meshes with a pair of pivoted fingers which rotate in counterrotation. The fingers rotate to pull a handle within the capture window into recess where latches lock handle in the recess. To align the capture window, plates may be cocked plus or minus five degrees on base. Drive means is included in the form of a motor coupled with a harmonic drive speed reducer, which provides for slow movement of the fingers at a high torque so that large articles may be handled. Novelty of the invention is believed to reside in the combined intermeshing finger structure, drive means and the harmonic drive speed reducer, which features provide the required maneuverability and strength.

Myers, W. Neill↗
NASA NTRS1989

The effect of initial velocity on manually controlled remote docking of an orbital maneuvering vehicle (OMV) to a space station

Simulated docking maneuvers were performed to assess the effect of initial velocity on docking failure rate, mission duration, and total impulse (fuel consumption). The effect of the removal of the range and rate displays was also examined. Since duration and impulse decrease and increase respectively with increases in initial velocity, two parameters were created by subtracting a reference value from each. These values were termed 'reserve time' and 'radial impulse'. Naive subjects were capable of achieving a high success rate in performing simulated docking maneuvers without extensive experience, and failure rate did not significantly increase with increased velocity. The amount of time pilots reserved for final approach increased with starting velocity. Piloting of docking maneuvers was not significantly affected in any way by the removal of range and rate displays. Values for reserve time, and radial impulse were lowest for docking maneuvers begun at the lowest initial velocity.

Brody, Adam R.↗
NASA NTRS1990

Numerical analysis of bipropellant combustion in orbit maneuvering vehicle thrust chamber

The combustion and aerodynamic processes of liquid-liquid bipropellant; monomethylhydrazine and nitrogen tetroxide in the combustion chamber of a variable thrust engine (VTE) have been examined to assess the flow structure, combustion characteristics, and wall heat transfer under the simulated engine operations at two power levels. The Generalized Elliptic Multi-phase flow with Chemical reaction, Heat transfer and Interfacial Processes (GEM-CHIP) code and the Bipropellant Combustion (BICOMB) code, which is the GEMCHIP algorithm reformulated in the frame work of a body fitted coordinate system, have been used for the numerical study. Combustion flow structure with non-premixed type injection that simulates the impingement type injector is predicted and the results are compared with that of the premixed injector.

Chiu, H. H.↗
NASA NTRS1990

Plume impingement study for reaction control system of the Orbital Maneuvering Vehicle

A study has been performed to assess plume impingement effects from the reaction control system of NASA's OMV. A key aspect of this modeling effort has been the use of the direct Monte Carlo method as an integral part of the nozzle/plume flowfield modeling and to compute the impingement effects for configurations in which vehicle structure or multiple plumes resulted in highly three-dimensional rarefied plume flowfields. The calculation of the flowfield for a pair of interacting thruster plumes has shown that backflow in the region between the thrusters is greatly enhanced by the interaction of the two plumes. Although the present analyses have focussed on impingement force and heating effects, this methodology would also be valuable for contamination assessments since it properly accounts for the species separation effects that are inherent in the nonequilibrium nature of rarefied gas flows.

Mcgregor, R. D.↗
NASA NTRS1999

Space Shuttle Orbital Maneuvering Subsystem (OMS) Engine Propellant Leakage Ball-Valve Shaft Seals

Evidence of propellant leakage across ball-valve shaft seals has been noted during the disassembly of five flight engines and one test engine at the NASA Lyndon B. Johnson Space Center, White Sands Test Facility. Based on data collected during the disassembly of these five engines, the consequences of propellant leakage across the ball-valve shaft seals can be divided into four primary areas of concern: Damage to the ball-valve pinion shafts, damage to sleeved bearings inside the ball-valve and actuator assemblies, degradation of the synthetic rubber o-rings used in the actuator assemblies, and corrosion and degradation to the interior of the actuator assemblies. The exact time at which leakage across the ball-valve shaft seals occurs has not been determined, however, the leakage most likely occurs during engine firings when, depending on the specification used, ball-valve cavity pressures range as high as 453 to 550 psia. This potential pressure range for the ball-valve cavities greatly exceeds the acceptance leakage test pressure of 332 psia. Since redesign and replacement of the ball-valve shaft seals is unlikely, the near term solution to prevent damage that occurs from shaft-seal leakage is to implement a routine overhaul and maintenance program for engines in the fleet. Recommended repair, verification, and possible preventative maintenance measures are discussed in the paper.

Lueders, Kathy↗