Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaluating the grain-scale deformation behavior of a single-phase FCC high entropy alloy using synchrotron high energy diffraction microscopy

We report although the deformation behavior of high-entropy alloys (HEAs) has been extensively studied at the macroscale, many important properties have yet to be explored for these alloys at the microscale, thus hampering accurate prediction of damage and failure processes. Synchrotron high-energy diffraction microscopy (HEDM) and fast-Fourier transform-based crystal plasticity modeling was conducted to investigate the three-dimensional (3D) grain-resolved micromechanical response for approximately 1,900 constituent grains within a single-phase FCC HEA up to 1% applied strain. The evolution of grain-resolved elastic strains, lattice reorientations, and maximum resolved shear stresses (mRSS) were evaluated to quantify elastic, yield, and fully plastic behavior. Overall, the initial critical resolved shear stress (CRSS), determined via in situ HEDM and companion modeling, was found to be > 20% higher than estimated using the classical polycrystalline Taylor factor (M = 3.06). However, a descriptive parameter based on the average grain-resolved Taylor factor ($\overline{M}$) was found to show excellent agreement with plastic yielding behavior observed within HEDM datasets. Noticeable deviations in HEDM lattice reorientations compared to both EVP-FFT simulations and classical predictions for FCC polycrystals were discovered, highlighting the complexity in correlating local lattice reorientations, Taylor, and Schmid factors with plastic response for this material at the grain-scale. Therefore, it is anticipated that the overall trends and parameter identification of 3D grain-resolved properties in this study can serve as an important foundation for continued mesoscale investigation on both well-established and newly developed Cantor-like HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strength, deformation, and equation of state of tungsten carbide to 66 GPa

Here, strength, texture, and equation of state of hexagonal tungsten monocarbide (WC) have been determined under quasi-hydrostatic and non-hydrostatic compression to 66 GPa using angle-dispersive X-ray diffraction in the diamond anvil cell. Quasi-hydrostatic compression in a Ne pressure medium demonstrates that nanocrystalline WC is slightly less incompressible than bulk-scale WC, with respective bulk moduli of K 0 = 377 ± 7 and 397 ± 7 GPa and pressure derivatives K 0 ’ = 3.8 ± 0.3 and 3.7 ±0.3. This decrease in incompressibility with grain size is similar to behavior observed in other ceramics. Under nonhydrostatic compression, WC supports a mean differential stress of ~12-15 GPa at plastic yielding, which occurs at ~30 GPa. Strength in WC is anisotropic, with the (001) plane supporting 29-42% higher stress than stresses calculated from mean strain. Simulations using an Elasto-ViscoPlastic Self-Consistent model indicate that strength inferred from lattice strain theory may be overestimated due to effects of plastic deformation. Plastic deformation generates a texture maximum near $\langle\bar{2}110\rangle$ in the compression orientation, initially through prismatic slip on the {$10\bar{1}0$}$\langle\bar{1}2\bar{1}0\rangle$ and {$10\bar{1}0$}$\langle0001\rangle$ slip systems, followed by activation of pyramidal slip on {$10\bar{1}1$}$\langle\bar{2}113\rangle$ at ~40-50 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Theoretical and kinetic modeling study of hydrazine oxidation

The present work constitutes the first theoretical and kinetic modeling study of hydrazine oxidation, which may be important for burnout in ammonia-fueled combustion. The kinetics of the oxidation of N 2 H 4 , N 2 H 3 and tHNNH by molecular oxygen were investigated via a quantum chemistry/canonical transition state theory approach. Geometries and anharmonic frequencies were obtained with density functional theory, and energies from coupled cluster calculations (CCSD(T)) extrapolated to the infinite basis set limit, with corrections for core-valence electron correlation, scalar relativistic effects, and higher level correlation up to lambda coupled cluster, CCSDT(Q) Λ . The key reactions occurred on the N 2 H 4 O 2 potential energy surface, where the results indicated a fast reaction of N 2 H 3 with HO 2 via singlet adducts to yield tHNNH + H 2 O 2 and HNN(H)O + H 2 O, while reaction on the triplet surface proceeds via a bound complex followed by a tight, submerged barrier to yield N 2 H 4 + O 2 . The results were incorporated in a detailed reaction mechanism, which was used to interpret the shock tube results from Michel and Wagner (1965) on the effect of O 2 on hydrazine conversion at 1100–1400 K. The kinetic model captured qualitatively the observed behavior, but underestimated the reaction rate under oxidizing conditions. The hydrazine pyrolysis chemistry dominated conversion at reducing conditions and/or high temperature. At oxidizing conditions and intermediate temperatures (≲ 1400 K), reactions of N 2 -amines with HO 2 and O 2 were important for the oxidation rate.

Ab initio calculations↗
DOE OSTI2023

Significance of pH and iron-sulfur chemistry for molybdenum sequestration under sulfidic conditions

Molybdenum (Mo), a redox-sensitive trace metal, plays an important role in recording ancient oxygenation and deoxygenation events as a paleoredox proxy. The mobility and reactivity of Mo in aqueous conditions are closely tied to the chemistry of reduced sulfur and iron species. However, our current knowledge on the formation, structure, stability, and condensation pathways of FeMoS clusters in aqueous settings remains limited, which has driven the current study. In this study, we conducted systematic experiments investigating the interactions between dissolved Mo (initially introduced as molybdate, MoO 4 2– , or tetrathiomolybdate, MoS 4 2– ), ferrous iron (Fe 2+ ), and sulfide (ΣH 2 S aq ) in variously defined abiotic sulfidic systems to determine the external conditions (i.e., pH, and reactant concentrations and ratios) necessary for the formation of solid-phase Fe-Mo sulfides. Solution samples of each system were monitored using ultraviolet-visible spectroscopy (UV–vis) to track the degree of thiolation of dissolved Mo species. Precipitates were analyzed using X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) to determine their elemental compositions and valences, and structure (i.e., crystalline or amorphous), respectively. All FeMoS precipitates were amorphous and contained 76–90% Mo(IV) and 10–24% Mo(V) with a trend toward lower Mo(IV):Mo(V) ratios with increasing pH. The degree of Mo thiolation, which was strongly dependent on solution pH and Fe 2+ concentrations, greatly affected the amount of Mo sequestered (i.e., an increased degree of Mo thiolation in solution led to an increased amount of Mo in the final FeMoS precipitate). Furthermore, these findings suggest that changes in pH and Fe 2+ concentrations may be responsible for the sulfide-independent variations in Mo behavior observed in euxinic basins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

An experimental, theoretical, and kinetic modeling study of post-flame oxidation of ammonia

The post -flame oxidation rate of ammonia was investigated in a novel atmospheric pressure flow reactor at temperatures of 1280 ± 16 K and as a function of residence time and mixture composition (1-10% O 2 , dry and moist). The experimental results, as well as selected data from literature, were analyzed using an updated detailed chemical kinetic model. The medium temperature, very lean conditions enhance the importance of reactions of the nitroxyl (HNO) intermediate. High-level theory was used to calculate the rate constant for HNO + NH 2 , indicating that this step is significantly faster than values used in literature. Furthermore, a trajectory based approach was used to determine collision efficiencies for selected bath gases for HNO + M. The experimental results show that the NH 3 oxidation rate increases with temperature and O 2 concentration, while the presence of water vapor slightly inhibits reaction. Formation of NO and N 2 O was strongly promoted at higher levels of O 2 . Modeling results agreed well with the measurements, except at the lowest level of O 2 . The predicted oxidation rate of NH 3 was shown to result from a delicate balance between chain branching and terminating steps involving NH 2 , H 2 NO, and HNO. Recent theoretical work on reactions of these species by Klippenstein and coworkers and Stagni et al. was instrumental in improving modeling predictions. After initiation, NO reached a pseudo -steady-state level, where the pathways to NO were largely balanced by the NH 2 + NO reaction. Nitric oxide was partly oxidized to NO 2 , with the NH 2 + NO 2 reaction responsible for most of the N 2 O formation. Novelty and significance statement: This study provides the first detailed kinetic analysis of the lean postflame oxidation of ammonia, based on time -resolved flow reactor data in a novel reactor. In addition to the post -flame oxidation rate of ammonia, data for formation of NO and N 2 O were compared with modeling predictions. The medium temperature, very lean conditions enhance the importance of reactions of the HNO and H 2 NO intermediates. Inclusion in the model of results from recent high-level theoretical work, including present calculations for HNO + NH 2 and HNO + M, was crucial for capturing the observed behavior. It is argued that the post -initiation steady-state NH 3 oxidation rates constitute important data for model validation, along with ignition delays and laminar flame speeds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mesoscale modeling of restructuring in high burnup UO 2 fuel

Here, this work aims to simulate the restructuring behavior observed in different regions of high burnup fuel, providing a first-of-its-kind restructuring model for the dark zone and rim region of high-burnup UO 2 fuel. We employed a grand-potential-based phase-field model to concurrently evaluate subgrain formation and the growth of fission gas bubbles within the fuel. An energy-based subgrain formation criterion was introduced to simulate the restructuring process. The effects of different initial conditions and different modeling parameters were systematically studied to capture how each of these parameters influences the characteristics of the restructured fuel. Subgrain formation was observed to begin around existing fission gas bubbles and proceed toward triple junctions, grain boundaries, and grain interiors. Restructuring was demonstrated to be influenced by a combination of initial dislocation densities, burnup rate, subgrain formation rate, and temperature. Under a given subgrain formation rate, the rate of restructuring increases with rising fuel temperature. A restructuring bias was observed within the microstructure, due to the variation in defect accumulation when comparing different grains. Microstructures corresponding to the dark zone and rim region can be obtained by parameterizing the model with the appropriate defect production rate, as determined based on the burnup rate and temperature. Furthermore, bubble size and distribution do not significantly affect the rate of restructuring. The predicted microstructures are consistent with experimental observations of the restructured regions. Finally, we present a correlation demonstrating the evolution of the restructuring volume fraction as a function of local burnup.

UO2↗
DOE OSTI2022

Shock compression behavior of stainless steel 316L octet-truss lattice structures

Lattice structures offer desirable mechanical properties for applications of energy absorption and impact mitigation but limited research has been carried out on their shock compression behavior. In this work, the shock compression behavior of stainless steel 316L (SS316L) octet-truss lattice structures was investigated through experimental techniques and numerical simulations. Plate impact experiments with high-speed imaging were conducted at impact velocities of 270 – 390 m/s on lattice specimens with 5x5x10 unit cell geometries additively manufactured (AM) using direct metal laser sintering. High-speed imaging together with digital image correlation was used to extract full-field measurements and define a two-wave structure consisting of an elastic wave and planar compaction (shock) wave which propagated along the impact direction. A linear shock velocity versus particle velocity relation was found to approximate the measurements with a unit slope and a linear fit constant equal to the crushing speed. Furthermore, the shock velocity versus particle velocity relation, full-field measurements, and elastic limit together with the Eulerian form of the Rankine-Hugoniot jump conditions were used to find relations for the stress and internal energy behind the shock. Stress behind the shock increased with relative density and particle velocity, and specific internal energy converged to a single curve similar to that of bulk AM SS316L. Explicit finite element analysis using the Johnson-Cook constitutive model demonstrated similar shock behavior observed in experiments and a linear shock velocity versus particle velocity relation and corresponding Hugoniot calculations were found to be in agreement with experimental results. Numerical simulations confirmed negligible effects of exterior versus interior measurements and further validated the application of one-dimensional shock theory.

42 ENGINEERING↗
DOE OSTI2025

Coupled phase field damage and crystal plasticity analysis of intragranular fracture: The role of crystallographic orientation and voids

Damage evolution in engineering metal alloys at the grain scale exhibits significant microstructural heterogeneity and anisotropy. These heterogeneities create local hotspots for stress and strain localization, leading to void nucleation. Crystal orientation influences the active slip systems around voids, affecting lattice rotation and potentially forming discontinuities. At low triaxiality, voids may change shape due to lower stress, rotation, elongation, and coalescence. At high triaxiality, the correlation between crystal orientation and void growth rate becomes stronger, resembling the behavior observed in isolated single crystals. Therefore, understanding the effects of crystal orientation, heterogeneous strain, and defect evolution is crucial for single crystal fracture characterization. Here, in this work, a coupled phase-field damage (PFD) and crystal plasticity (CP) model is implemented within a finite element framework to analyze crystal deformation and failure. The CP method employs a dislocation density-based constitutive model, while intragranular failure is modeled using an anisotropic PFD method. The PFD model considers both the stored energy due to elastic stretching and the energy release due to defect formation and crack formation. A single crystal Al2219 with an intracrystalline spherical void is chosen to analyze fracture. The study finds that fracture propagation is strongly correlated with crystal orientations. This coupled CP-PFD model provides accurate failure prediction in crystalline materials by incorporating the effects of crystal orientations and existing voids. This study demonstrates how the local microstructure and defects influence plastic deformation and failure mechanisms in metal alloys.

Aluminum alloy↗
DOE OSTI2025

Probing the shear-induced microstructure of a smectite clay aqueous suspensions using rheo-USANS and rheo-SIPLI measurements

Hypothesis: The static microstructure of aqueous sodium-montmorillonite (Na-Mt) suspensions at low ionic strengths (where Particle Size/Debye Length ≈1) exhibits both the particle–particle ordering as well as aggregation with repulsive ordered domains having characteristic optical birefringence and attractive aggregated entities larger than 20 µm resulting in ever-increasing yield stresses also known as physical aging-rejuvenation behavior. We hypothesize that the attractive particle–particle aggregation is the underlying cause behind the physical aging-rejuvenation behavior observed in Na-Mt suspensions with no contribution from structural dynamics driven by repulsive particle–particle ordering or jamming. Experiments: We investigate the shear-induced microstructure of aqueous Na-Mt suspensions in the sol and gel state using rheo-ultra-small angle neutron scattering (rheo-USANS) experiments at shear rates of 1, 50, 500, and 2000 s −1 . We also perform rheo-shear-induced polarization light imaging (rheo-SIPLI) experiments to relate ordering with shearing and aging. Findings: Shearing the suspensions at low to moderate shear rates induces particle–particle aggregation and shearing at high shear rates induces the breakage of particle–particle aggregation in the sol and gel states, suggesting the microstructural aggregation in the sol and gel state is shear sensitive and a full rejuvenation or breakage of particle–particle aggregation is only achieved at a minimum critical shear rate. The rheo-SIPLI experiments reveal that the sol and gel state exhibited strong Maltese cross patterns at a shear rate of 1000 s −1 , indicating particle–particle ordering. Post shearing, the gel exhibited temporal evolution of storage modulus without any noticeable influence on the appearance of the Maltese cross pattern indicating physical aging and particle ordering are distinct length scale phenomena in Na-Mt suspensions and the physical aging-rejuvenation behaviour is a feature of particle–particle aggregation as opposed to ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Micromechanical response of SiC-OPyC layers in TRISO fuel particles

Tristructural isotropic (TRISO)–coated particle fuel is a proposed fuel for multiple advanced reactor concepts. The performance of the particle depends on whether the silicon carbide (SiC) layer remains intact to prevent the release of metallic and gaseous fission products. Mechanical fracture of the SiC layer is a potential failure mode under various fuel configurations and operating environments, including the potential transmission of matrix-originating cracks through TRISO particles. Furthermore, this study uses instrumented indentation techniques on cross-sectioned surrogate particles to examine the mechanical stability of the critical interface between SiC and the outer pyrolytic carbon (OPyC) layer. The observed behavior at the interface is rationalized by examining the radially dependent fracture behavior of the SiC layer and performing a numerical analysis to quantify the residual stresses that develop during the processing and cross-sectioning of the as-fabricated particle. Characterizing the SiC-OPyC interface of surrogate TRISO particles using nanoindentation provides unique insight into the interface's room-temperature residual stress and mechanical stability. The modeling efforts were used to investigate the experimental procedure further, and the results are presented herein to validate this fuel form's potential mechanical failure modes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Spatially-resolved lithiation dynamics from operando X-ray diffraction and electrochemical modeling of lithium-ion cells

In this study, energy dispersive X-ray diffraction is used to profile the time evolution of ordered Li x C 6 phases in solid electrodes of lithium-ion cells charged at rates between 0.2 and 4.7C (where 1C corresponds to full discharge in 1 h). The methods for quantifying lithium concentration in these phases from the acquired diffraction patterns are described. Compact expressions for time-dependent concentration gradients in the solid electrodes using orthogonal polynomial expansions are presented. Experimentally, these gradients persisted in lithiated graphite electrodes even after the cells rested at open-circuit for over 9 h. A multiphase electrochemical model of graphite intercalation captured many of the observed behaviors, including the progression of phase transitions and the persistent gradients at zero current. However, the magnitude of concentration gradients in both the oxide cathode and graphite anode is underestimated by the model, even at moderate currents.

25 ENERGY STORAGE↗
DOE OSTI2023

The 12-layer trimer-based hexagonal perovskite Cs 4 Ca 0.7 Mn 3.3 Cl 12

Here, we describe the crystal structure and basic magnetic properties of Cs 4 Ca 0.7 Mn 3.3 Cl 12 , a previously unreported twelve layer (12L-) hexagonal (R-3m) chloride perovskite. Its crystal structure features face sharing MnCl 6 octahedra that form Mn 3 Cl 12 trimers. The trimers, which form a triangular array, are separated by corner sharing to layers of disordered single Ca(Mn)Cl 6 octahedra. The decreased intratrimer Mn–Mn distance yields stronger magnetic coupling within trimers than between trimers. The dominant magnetic interactions are antiferromagnetic (θ CW = –105 K), the effective magnetic moment per Mn 2+ is 6.5 μ B , and potential signatures of magnetic frustration are observed. Behavior consistent with short- and long-range magnetic order is exhibited at approximately 37 and 0.7 K, respectively.

12L-hexagonal perovskite↗
DOE OSTI2023

Incorporating dynamic recrystallization into a crystal plasticity model for high-temperature deformation of Ti-6Al-4V

During hot deformation of (α + β) titanium alloys, the simultaneous action of strain and temperature in the (α + β) regime facilitates dynamic recovery, dynamic recrystallization (DRX), and phase transformations via non-equilibrium paths. DRX is manifested in the form of fine recrystallized α or β grains. Here, in the present study, a two-phase crystal plasticity finite element framework (CP-DRX) has been developed which incorporates DRX kinetics into the crystal plasticity (CP) model to predict the flow characteristics of Ti-6Al-4V alloys during thermo-mechanical processing. The CP slip system parameters, as well as elastic properties from both α and β phases of Ti, are calibrated for different strain rate conditions. An EBSD-informed two-phase microstructure representation has been utilized in the CP-DRX framework to explore the time-dependent evolution of DRX microstructure and crystal orientation for different strain rate conditions. The proposed CP-DRX can capture the evolution of crystal orientation and plastic flow stress–strain response of polycrystalline Ti-6Al-4V during the deformation process. Furthermore, the proposed model is able to capture the softening behavior, observed in average stress–strain response from experiments performed using a Gleeble thermomechanical simulator and predict the recrystallization texture.

(α+ β)-Titanium (Ti) Alloys↗
DOE OSTI2023

London penetration depth of electron-irradiated Ba 0 . 47 K 0 . 53 Fe 2 As 2

We have characterized an electron-irradiated Ba 1-x K x Fe 2 As 2 (x = 0.53) single-crystal using two different experimental techniques: magneto-optic measurements and microwave measurements. The crystal has been measured before as well as after the 2.5 MeV electron irradiation process. After irradiation it was annealed in a number of steps, between 90 °C and 180 °C, and measured after each annealing step. Most microwave measurements were performed by means of a copper cavity, taking advantage of the TE 011 and TM 110 modes, allowing for the determination of the London penetration depths changes δλ ab (T) and δλ c (T), ie perpendicular and parallel to the sample c-axis. Appropriate equations, based on perturbation theory, were derived to calculate the penetration depths changes δλ ab and δλ c for a rectangular prism geometry. The sample showed a full recovery of its T c , however the observed behavior of δλ c and δλ ab was not monotonic vs annealing temperature, displaying a minimum of δλ c and δλ ab at 120 °C. In conclusion, this finding was confirmed by magneto-optic measurements, where besides verifying the sample uniformity and the absence of visible defects, the lower critical field H c1 of the Ba 1-x K x Fe 2 As 2 single-crystal was obtained and the London penetration depth λab(0) was calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Understanding the low-temperature chemistry of 1,2,4-trimethylbenzene

1,2,4-trimethylbenzene is an important representative aromatic component of gasoline/diesel/jet fuels and thus it is necessary to understand its low-temperature chemistry. In this paper, ignition delay times (IDTs) of both 1,2,4-trimethylbenzene (124TMB) and its blends with n -heptane were measured at engine-like conditions using both a high-pressure shock tube and a rapid compression machine for fuel in ‘air’ mixtures at pressures of 10 and 30 atm and at temperatures in the range 600 – 1100K. The experiments in this study show for the first time that 124TMB presents a two-stage ignition behavior at engine relevant conditions. Blending n -heptane with 124TMB can significantly increase mixture reactivity at temperatures below 1000K. A new detailed mechanism has been developed to simulate the experimentally measured IDT data. The mechanism can capture well the two-stage ignition behavior as well as the ignition delays at different pressures, equivalence ratios over a wide temperature range, for both pure fuels and their blended mixtures. Flux analyses show that the benzylic radicals (formed via H-atom abstraction from the methyl groups ortho-sites on 124TMB) can add to O 2 forming $\mathrm{R\dot{O}_2}$ radicals, which can isomerize to $\dot{Q}$OOH by intramolecular H-atom transfer from the ortho- methyl group and these $\dot{Q}$OOH radicals undergo a second addition to O 2 . This is analogous to the chain branching reaction pathways of alkanes. The chain branching reaction pathways are responsible for the first-stage heat release of 124TMB. In conclusion, the competitions between chain branching and both chain propagating and chain termination reaction pathways lead to a less pronounced negative temperature coefficient (NTC) behavior for 124TMB oxidation, compared to two-stage ignition behavior observed for alkanes and other fuels.

1,2,4-trimethylbenzene↗
DOE OSTI2022

A boundary-based approach to the multiscale microstructural characterization of a W-Ni-Fe tungsten heavy alloy

Here, a combination electron backscattered diffraction and transmission electron microscopy based approach has been implemented to study the effects of purposefully introduced anisotropy in a tungsten heavy alloy (WHA) through hot-rolling. Particular attention has been paid to changes in number and proportion of various boundary types from a quantitative standpoint; incorporating qualitative behavioral observations from prior analyses to generate experimentally-validated bases for the examination and application of a microstructure which exhibits an optimal balance of strength and ductility. It is asserted that a combination of increased temperatures during rolling and additional isothermal hold time for the post-rolling annealing steps may lead to a reduction in unfavorable textural components due to rolling in the W-phase and a decrease in premature fracture due to W-W microcracking respectively. This is expected to further increase the proportion of interphase boundaries and improve the ductility of these rolled structures, producing a superior rolled WHA microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Continuum Modeling of Porous Electrodes for Electrochemical Synthesis

Electrochemical synthesis possesses substantial promise to utilize renewable energy sources to power the conversion of abundant feedstocks to value-added commodity chemicals and fuels. Of the potential system architectures for these processes, only systems employing 3-D structured porous electrodes have the capacity to achieve the high rates of conversion necessary for industrial scale. However, the phenomena and environments in these systems are not well understood and are challenging to probe experimentally. Fortunately, continuum modeling is well-suited to rationalize the observed behavior in electrochemical synthesis, as well as to ultimately provide recommendations for guiding the design of next-generation devices and components. In this review, we begin by presenting an historical review of modeling of porous electrode systems, with the aim of showing how past knowledge of macroscale modeling can contribute to the rising challenge of electrochemical synthesis. We then present a detailed overview of the governing physics and assumptions required to simulate porous electrode systems for electrochemical synthesis. Here, leveraging the developed understanding of porous-electrode theory, we survey and discuss the present literature reports on simulating multiscale phenomena in porous electrodes in order to demonstrate their relevance to understanding and improving the performance of devices for electrochemical synthesis. Lastly, we provide our perspectives regarding future directions in the development of models that can most accurately describe and predict the performance of such devices and discuss the best potential applications of future models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

La 3 CuTe 5 : A Narrow-Gap Semiconductor with Indirect Gap and Dual-Regime Thermally Activated Transport

Metal-chalcogenide systems remain a long-standing research topic because of their structural diversity and potential to host emergent phenomena. Here, we report a new compound, La 3 CuTe 5 , synthesized from the halide-flux method. Single-crystal X-ray diffraction studies indicate the structure to be unique among reported ones. Here, the compound crystallizes in a novel structure type adopting the orthorhombic space group Pnma and a unit cell of a = 24.3947(14) Å, b = 4.4232(2) Å, and c = 10.2142(5) Å. The tetrahedral [CuTe 4 ] building blocks form chains along [010] by corner sharing and link [LaTe 7 ] and [LaTe 8 ] polyhedra via edge sharing, resulting in a three-dimensional bulk structure. Thermal analysis results indicate that the material remains stable with a temperature up to 950 °C and decomposable at 1400 °C. First-principles calculations reveal an indirect electronic band gap and flat valence bands dominated by Te p and Cu d states. Optical absorption measurements yield a band gap of ∼0.65 eV, consistent with semiconducting behavior observed in transport measurements. Fittings to the temperature-dependent resistivity reveal two thermally activated regimes associated with Arrhenius-type conduction and three-dimensional variable range hopping, respectively.

Chalcogenides↗